Abstract: European Union candidate status provides a
strong motivation for decision-making in the candidate
countries in shaping the regional development policy where
there is an envisioned transfer of power from center to the
periphery. The process of Europeanization anticipates the
candidate countries configure their regional institutional
templates in the context of the requirements of the European
Union policies and introduces new instruments of incentive
framework of enlargement to be employed in regional
development schemes. It is observed that the contribution of
the local actors to the decision making in the design of the
allocation architectures enhances the efficiency of the funds
and increases the positive effects of the projects funded under
the regional development objectives. This study aims at
exploring the performances of the three regional development
grant schemes in Turkey, established and allocated under the
pre-accession process with a special emphasis given to the
roles of the national and local actors in decision-making for
regional development. Efficiency analyses have been
conducted using the DEA methodology which has proved to
be a superior method in comparative efficiency and
benchmarking measurements. The findings of this study as
parallel to similar international studies, provides that the
participation of the local actors to the decision-making in
funding contributes both to the quality and the efficiency of
the projects funded under the EU schemes.
Abstract: To identify an endothelial cell-specific promoter suitable for vascular-specific targeting, we tested five promoters in vitro--Tie2SE, Tie2LE, ICAM2, Flt-1 and vWF--for promoter activity and specificity in endothelial cells, smooth muscle cells and non-vascular resident cells as well as tissues. These promoters, except for vWF, exhibited good endothelial activity and specificity in vitro. In a syngenic heart transplantation model, the ICAM2 promoter was variably functional in coronary endothelial cells of donor hearts. Thus, the ICAM2, Flt-1, Tie2SE and Tie2LE promoters hold promise for endothelial-specific targeting, but in vitro expression may not predict in vivo expression.
Abstract: This paper describes a new supervised fusion (hybrid)
electrocardiogram (ECG) classification solution consisting of a new
QRS complex geometrical feature extraction as well as a new version
of the learning vector quantization (LVQ) classification algorithm
aimed for overcoming the stability-plasticity dilemma. Toward this
objective, after detection and delineation of the major events of ECG
signal via an appropriate algorithm, each QRS region and also its
corresponding discrete wavelet transform (DWT) are supposed as
virtual images and each of them is divided into eight polar sectors.
Then, the curve length of each excerpted segment is calculated
and is used as the element of the feature space. To increase the
robustness of the proposed classification algorithm versus noise,
artifacts and arrhythmic outliers, a fusion structure consisting of
five different classifiers namely as Support Vector Machine (SVM),
Modified Learning Vector Quantization (MLVQ) and three Multi
Layer Perceptron-Back Propagation (MLP–BP) neural networks with
different topologies were designed and implemented. The new proposed
algorithm was applied to all 48 MIT–BIH Arrhythmia Database
records (within–record analysis) and the discrimination power of the
classifier in isolation of different beat types of each record was
assessed and as the result, the average accuracy value Acc=98.51%
was obtained. Also, the proposed method was applied to 6 number
of arrhythmias (Normal, LBBB, RBBB, PVC, APB, PB) belonging
to 20 different records of the aforementioned database (between–
record analysis) and the average value of Acc=95.6% was achieved.
To evaluate performance quality of the new proposed hybrid learning
machine, the obtained results were compared with similar peer–
reviewed studies in this area.
Abstract: Industrial radiography is a famous technique for the identification and evaluation of discontinuities, or defects, such as cracks, porosity and foreign inclusions found in welded joints. Although this technique has been well developed, improving both the inspection process and operating time, it does suffer from several drawbacks. The poor quality of radiographic images is due to the physical nature of radiography as well as small size of the defects and their poor orientation relatively to the size and thickness of the evaluated parts. Digital image processing techniques allow the interpretation of the image to be automated, avoiding the presence of human operators making the inspection system more reliable, reproducible and faster. This paper describes our attempt to develop and implement digital image processing algorithms for the purpose of automatic defect detection in radiographic images. Because of the complex nature of the considered images, and in order that the detected defect region represents the most accurately possible the real defect, the choice of global and local preprocessing and segmentation methods must be appropriated.
Abstract: Information is power. Geographical information is an
emerging science that is advancing the development of knowledge to
further help in the understanding of the relationship of “place" with
other disciplines such as crime. The researchers used crime data for
the years 2004 to 2007 from the Baguio City Police Office to
determine the incidence and actual locations of crime hotspots.
Combined qualitative and quantitative research methodology was
employed through extensive fieldwork and observation, geographic
visualization with Geographic Information Systems (GIS) and Global
Positioning Systems (GPS), and data mining. The paper discusses
emerging geographic visualization and data mining tools and
methodologies that can be used to generate baseline data for
environmental initiatives such as urban renewal and rejuvenation.
The study was able to demonstrate that crime hotspots can be
computed and were seen to be occurring to some select places in the
Central Business District (CBD) of Baguio City. It was observed that
some characteristics of the hotspot places- physical design and milieu
may play an important role in creating opportunities for crime. A list
of these environmental attributes was generated. This derived
information may be used to guide the design or redesign of the urban
environment of the City to be able to reduce crime and at the same
time improve it physically.
Abstract: This research contribution is drafted to present the
orbit design, orbit propagator and geomagnetic field estimator for the
nanosatellites specifically for the upcoming CUBESAT, ICUBE-1 of
the Institute of Space Technology (IST), Islamabad, Pakistan. The
ICUBE mission is designed for the low earth orbit at the approximate
height of 700KM. The presented research endeavor designs the
Keplarian elements for ICUBE-1 orbit while incorporating the
mission requirements and propagates the orbit using J2 perturbations,
The attitude determination system of the ICUBE-1 consists of
attitude determination sensors like magnetometer and sun sensor. The
Geomagnetic field estimator is developed according to the model of
International Geomagnetic Reference Field (IGRF) for comparing the
magnetic field measurements by the magnetometer for attitude
determination. The output of the propagator namely the Keplarians
position and velocity vectors and the magnetic field vectors are
compared and verified with the same scenario generated in the
Satellite Tool Kit (STK).
Abstract: Atrial Fibrillation is the most common sustained
arrhythmia encountered by clinicians. Because of the invisible
waveform of atrial fibrillation in atrial activation for human, it is
necessary to develop an automatic diagnosis system. 12-Lead ECG
now is available in hospital and is appropriate for using Independent
Component Analysis to estimate the AA period. In this research, we
also adopt a second-order blind identification approach to transform
the sources extracted by ICA to more precise signal and then we use
frequency domain algorithm to do the classification. In experiment,
we gather a significant result of clinical data.
Abstract: The stability of Newtonian and Non-Newtonian extending films under local or global heating or cooling conditions are considered. The thickness-averaged mass, momentum and energy equations with convective and radiative heat transfer are derived, both for Newtonian and non-Newtonian fluids (Maxwell, PTT and Giesekus models considered). The stability of the system is explored using either eigenvalue analysis or transient simulations. The results showed that the influence of heating and cooling on stability strongly depends on the magnitude of the Peclet number. Examples of stabilization or destabilization of heating or cooling are shown for Pe
Abstract: Segmentation techniques based on Active Contour
Models have been strongly benefited from the use of prior information
during their evolution. Shape prior information is captured from
a training set and is introduced in the optimization procedure to
restrict the evolution into allowable shapes. In this way, the evolution
converges onto regions even with weak boundaries. Although
significant effort has been devoted on different ways of capturing
and analyzing prior information, very little thought has been devoted
on the way of combining image information with prior information.
This paper focuses on a more natural way of incorporating the
prior information in the level set framework. For proof of concept
the method is applied on hippocampus segmentation in T1-MR
images. Hippocampus segmentation is a very challenging task, due
to the multivariate surrounding region and the missing boundary
with the neighboring amygdala, whose intensities are identical. The
proposed method, mimics the human segmentation way and thus
shows enhancements in the segmentation accuracy.
Abstract: The main goal of the present work is to decrease the
computational burden for optimum design of steel frames with
frequency constraints using a new type of neural networks called
Wavelet Neural Network. It is contested to train a suitable neural
network for frequency approximation work as the analysis program.
The combination of wavelet theory and Neural Networks (NN)
has lead to the development of wavelet neural networks.
Wavelet neural networks are feed-forward networks using
wavelet as activation function. Wavelets are mathematical
functions within suitable inner parameters, which help them to
approximate arbitrary functions. WNN was used to predict the
frequency of the structures. In WNN a RAtional function with
Second order Poles (RASP) wavelet was used as a transfer
function. It is shown that the convergence speed was faster
than other neural networks. Also comparisons of WNN with
the embedded Artificial Neural Network (ANN) and with
approximate techniques and also with analytical solutions are
available in the literature.
Abstract: In this paper the reference current for Voltage Source
Converter (VSC) of the Shunt Active Power Filter (SAPF) is
generated using Synchronous Reference Frame method,
incorporating the PI controller with anti-windup scheme. The
proposed method improves the harmonic filtering by compensating
the winding up phenomenon caused by the integral term of the PI
controller.
Using Reference Frame Transformation, the current is transformed
from om a - b - c stationery frame to rotating 0 - d - q frame. Using
the PI controller, the current in the 0 - d - q frame is controlled to
get the desired reference signal. A controller with integral action
combined with an actuator that becomes saturated can give some
undesirable effects. If the control error is so large that the integrator
saturates the actuator, the feedback path becomes ineffective because
the actuator will remain saturated even if the process output changes.
The integrator being an unstable system may then integrate to a very
large value, the phenomenon known as integrator windup.
Implementing the integrator anti-windup circuit turns off the
integrator action when the actuator saturates, hence improving the
performance of the SAPF and dynamically compensating harmonics
in the power network. In this paper the system performance is
examined with Shunt Active Power Filter simulation model.
Abstract: In this study we present our developed formative
assessment tool for students' assignments. The tool enables lecturers
to define assignments for the course and assign each problem in each
assignment a list of criteria and weights by which the students' work
is evaluated. During assessment, the lecturers feed the scores for each
criterion with justifications. When the scores of the current
assignment are completely fed in, the tool automatically generates
reports for both students and lecturers. The students receive a report
by email including detailed description of their assessed work, their
relative score and their progress across the criteria along the course
timeline. This information is presented via charts generated
automatically by the tool based on the scores fed in. The lecturers
receive a report that includes summative (e.g., averages, standard
deviations) and detailed (e.g., histogram) data of the current
assignment. This information enables the lecturers to follow the class
achievements and adjust the learning process accordingly. The tool
was examined on two pilot groups of college students that study a
course in (1) Object-Oriented Programming (2) Plane Geometry.
Results reveal that most of the students were satisfied with the
assessment process and the reports produced by the tool. The
lecturers who used the tool were also satisfied with the reports and
their contribution to the learning process.
Abstract: Adhesively bonded joints are preferred over the
conventional methods of joining such as riveting, welding, bolting
and soldering. Some of the main advantages of adhesive joints
compared to conventional joints are the ability to join dissimilar
materials and damage-sensitive materials, better stress distribution,
weight reduction, fabrication of complicated shapes, excellent
thermal and insulation properties, vibration response and enhanced
damping control, smoother aerodynamic surfaces and an
improvement in corrosion and fatigue resistance. This paper presents
the behavior of adhesively bonded joints subjected to combined
thermal loadings, using the numerical methods. The joint
configuration considers aluminum as central adherend with six
different outer adherends including aluminum, steel, titanium, boronepoxy,
unidirectional graphite-epoxy and cross-ply graphite-epoxy
and epoxy-based adhesives. Free expansion of the joint in x
direction was permitted and stresses in adhesive layer and interfaces
calculated for different adherends.
Abstract: Proper management of residues originated from
industrial activities is considered as one of the serious challenges
faced by industrial societies due to their potential hazards to the
environment. Common disposal methods for industrial solid wastes
(ISWs) encompass various combinations of solely management
options, i.e. recycling, incineration, composting, and sanitary
landfilling. Indeed, the procedure used to evaluate and nominate the
best practical methods should be based on environmental, technical,
economical, and social assessments. In this paper an environmentaltechnical
assessment model is developed using analytical network
process (ANP) to facilitate the decision making practice for ISWs
generated at Gilan province, Iran. Using the results of performed
surveys on industrial units located at Gilan, the various groups of
solid wastes in the research area were characterized, and four
different ISW management scenarios were studied. The evaluation
process was conducted using the above-mentioned model in the
Super Decisions software (version 2.0.8) environment. The results
indicates that the best ISW management scenario for Gilan province
is consist of recycling the metal industries residues, composting the
putrescible portion of ISWs, combustion of paper, wood, fabric and
polymeric wastes as well as energy extraction in the incineration
plant, and finally landfilling the rest of the waste stream in addition
with rejected materials from recycling and compost production plants
and ashes from the incineration unit.
Abstract: Prediction of bacterial virulent protein sequences can
give assistance to identification and characterization of novel
virulence-associated factors and discover drug/vaccine targets against
proteins indispensable to pathogenicity. Gene Ontology (GO)
annotation which describes functions of genes and gene products as a
controlled vocabulary of terms has been shown effectively for a
variety of tasks such as gene expression study, GO annotation
prediction, protein subcellular localization, etc. In this study, we
propose a sequence-based method Virulent-GO by mining informative
GO terms as features for predicting bacterial virulent proteins.
Each protein in the datasets used by the existing method
VirulentPred is annotated by using BLAST to obtain its homologies
with known accession numbers for retrieving GO terms. After
investigating various popular classifiers using the same five-fold
cross-validation scheme, Virulent-GO using the single kind of GO
term features with an accuracy of 82.5% is slightly better than
VirulentPred with 81.8% using five kinds of sequence-based features.
For the evaluation of independent test, Virulent-GO also yields better
results (82.0%) than VirulentPred (80.7%). When evaluating single
kind of feature with SVM, the GO term feature performs much well,
compared with each of the five kinds of features.
Abstract: In cellular networks, limited availability of resources
has to be tapped to its fullest potential. In view of this aspect, a
sophisticated averaging and voting technique has been discussed in
this paper, wherein the radio resources available are utilized to the
fullest value by taking into consideration, several network and radio
parameters which decide on when the handover has to be made and
thereby reducing the load on Base station .The increase in the load
on the Base station might be due to several unnecessary handover
taking place which can be eliminated by making judicious use of the
radio and network parameters.
Abstract: Biofuels, like biobutanol, have been recognized for
being renewable and sustainable fuels which can be produced from
lignocellulosic biomass. To convert lignocellulosic biomass to
biofuel, pretreatment process is an important step to remove
hemicelluloses and lignin to improve enzymatic hydrolysis. Dilute
acid pretreatment has been successful developed for pretreatment of
corncobs and the optimum conditions of dilute sulfuric and
phosphoric acid pretreatment were obtained at 120 °C for 5 min with
15:1 liquid to solid ratio and 140 °C for 10 min with 10:1 liquid to
solid ratio, respectively. The result shows that both of acid
pretreatments gave the content of total sugar approximately 34–35
g/l. In case of inhibitor content (furfural), phosphoric acid
pretreatment gives higher than sulfuric acid pretreatment.
Characterizations of corncobs after pretreatment indicate that both of
acid pretreatments can improve enzymatic accessibility and the better
results present in corncobs pretreated with sulfuric acid in term of
surface area, crystallinity, and composition analysis.
Abstract: The last Assessment Report of the Intergovernmental
Panel on Climate Change, stating that the greatest risk in climate
change affects sustainability is now widely known and accepted.
However, it has not provoked substantial reaction and attention in
Hungary, while international and national efforts have also not
achieved expected results so far. Still, there are numerous examples
on different levels (national, regional, local, household) making
considerable progress in limiting their own emissions and making
steps toward mitigation of and adaptation to climate change. The
local level is exceptionally important in sustainability adaptation, as
local communities are often able to adapt more flexibly to changes in
the natural environment.The aim of this paper is to attempt a review
of the national climate policy and the local climate change strategies
in Hungary considering sustainable development.
Abstract: Fermented cassava flours (lafun) sold in Ogun and Oyo
States of Nigeria were collected from 10 markets for a period of two
months and analysed to determine their safety status. The presence of
trace metals was due to high vehicular movement around the drying
sites and markets. Cyanide and moisture contents of samples were
also determined to assess the adequacy of fermentation and drying.
The result showed that sample OWO was found to have the highest
amount of 16.02±0.12mg/kg cyanide while the lowest was found in
sample OJO with 10.51±0.10mg/kg. The results also indicated that
sample TVE had the highest moisture content of 18.50±0.20% while
sample OWO had the lowest amount of 12.46±0.47%. Copper and
lead levels were found to be highest in TVE with values 28.10mg/kg
and 1.1mg/kg respectively, while sample BTS had the lowest values
of 20.6mg/kg and 0.05mg/kg respectively. High value of cyanide
indicated inadequate fermentation.
Abstract: The so-called all-pass filter circuits are commonly
used in the field of signal processing, control and measurement.
Being connected to capacitive loads, these circuits tend to loose their
stability; therefore the elaborate analysis of their dynamic behavior is
necessary. The compensation methods intending to increase the
stability of such circuits are discussed in this paper, including the socalled
lead-lag compensation technique being treated in detail. For
the dynamic modeling, a two-port network model of the all-pass filter
is being derived. The results of the model analysis show, that
effective lead-lag compensation can be achieved, alone by the
optimization of the circuit parameters; therefore the application of
additional electric components are not needed to fulfill the stability
requirement.