Abstract: To unveil the mechanism of fast autooxidation of fish
myoglobins, the effect of temperature on the structural change of tuna
myoglobin was investigated. Purified myoglobin was subjected to
preincubation at 5, 20, 50 and 40oC. Overall helical structural decay
through thermal treatment up to 95oC was monitored by circular
dichroism spectrometry, while the structural changes around the heme
pocket was measured by ultraviolet/visible absorption spectrophotometry.
As a result, no essential structural change of myoglobin
was observed under 30oC, roughly equivalent to their body
temperature, but the structure was clearly damaged at 40oC. The Soret
band absorption hardly differed irrespective of preincubation
temperature, suggesting that the structure around the heme pocket was
not perturbed even after thermal treatment.
Abstract: An Optimal Power Flow based on Improved Particle
Swarm Optimization (OPF-IPSO) with Generator Capability Curve
Constraint is used by NN-OPF as a reference to get pattern of
generator scheduling. There are three stages in Designing NN-OPF.
The first stage is design of OPF-IPSO with generator capability curve
constraint. The second stage is clustering load to specific range and
calculating its index. The third stage is training NN-OPF using
constructive back propagation method. In training process total load
and load index used as input, and pattern of generator scheduling
used as output. Data used in this paper is power system of Java-Bali.
Software used in this simulation is MATLAB.
Abstract: This paper presents an application of level sets for the segmentation of abdominal and thoracic aortic aneurysms in CTA
datasets. An important challenge in reliably detecting aortic is the
need to overcome problems associated with intensity
inhomogeneities. Level sets are part of an important class of methods
that utilize partial differential equations (PDEs) and have been extensively applied in image segmentation. A kernel function in the
level set formulation aids the suppression of noise in the extracted
regions of interest and then guides the motion of the evolving contour
for the detection of weak boundaries. The speed of curve evolution
has been significantly improved with a resulting decrease in segmentation time compared with previous implementations of level
sets, and are shown to be more effective than other approaches in
coping with intensity inhomogeneities. We have applied the Courant
Friedrichs Levy (CFL) condition as stability criterion for our algorithm.
Abstract: In this paper, a mathematical model of human immunodeficiency
virus (HIV) is utilized and an optimization problem is
proposed, with the final goal of implementing an optimal 900-day
structured treatment interruption (STI) protocol. Two type of commonly
used drugs in highly active antiretroviral therapy (HAART),
reverse transcriptase inhibitors (RTI) and protease inhibitors (PI), are
considered. In order to solving the proposed optimization problem an
adaptive memetic algorithm with population management (AMAPM)
is proposed. The AMAPM uses a distance measure to control the
diversity of population in genotype space and thus preventing the
stagnation and premature convergence. Moreover, the AMAPM uses
diversity parameter in phenotype space to dynamically set the population
size and the number of crossovers during the search process.
Three crossover operators diversify the population, simultaneously.
The progresses of crossover operators are utilized to set the number
of each crossover per generation. In order to escaping the local optima
and introducing the new search directions toward the global optima,
two local searchers assist the evolutionary process. In contrast to
traditional memetic algorithms, the activation of these local searchers
is not random and depends on both the diversity parameters in
genotype space and phenotype space. The capability of AMAPM in
finding optimal solutions compared with three popular metaheurestics
is introduced.
Abstract: The most severe damage of the turbine rotor is its
distortion. The rotor straightening process must lead, at the first
stage, to removal of the stresses from the material by annealing and
next, to straightening of the plastic distortion without leaving any
stress by hot spotting. The straightening method does not produce
stress accumulations and the heating technique, developed
specifically for solid forged rotors and disks, enables to avoid local
overheating and structural changes in the material. This process also
does not leave stresses in the shaft material. An experimental study
of hot spotting is carried out on a large turbine rotor and some of the
most important effective parameters that must be considered on
annealing and hot spotting processes are investigated in this paper.
Abstract: The organic farmers use wider range of crop varieties than the conventional farming. Bread wheat is the most favorite and the most common food crop. The organic bread wheat is usually of worse technological quality. Therefore, it is supposed to be an attractive alternative to the hulled wheat species (einkorn, emmer wheat and spelt). Twenty-five hulled bread wheat varieties and control bread wheat ones were grown on the certified organic parcel in České Budějovice (the Czech Republic) between 2009 and 2012. Their baking quality was measured and evaluated with standard methods, and in accordance with ICC. The results have shown that the grain of hulled wheat varieties contain a lot of proteins in grains (up to 18 percent); even the organic hulled bread wheat varieties are characterized by such good baking quality. Einkorn and emmer wheat are of worse technological quality of proteins (low values of gluten index and Zeleny test), which is a disadvantage of these two wheat species. On the other hand, spelt wheat is of better technological quality and is similar to the control bread wheat varieties. Mixtures consisting of bread wheat, among others, are considered good alternatives; they may contribute to wider range of use of the hulled wheat species. It is one of the possibilities which may increase the proportion of proteins in bread wheat grains; the nutrition-rich hulled wheat grains may be also used in such way at the same time.
Abstract: The research object was apple-black currant
marmalade candies. Experiments were carried out at the Faculty of
Food Technology of the Latvia University of Agriculture. An active
packaging in combination with modified atmosphere (MAP, CO2
100%) was examined and compared with traditional packaging in air
ambiance. Polymer Multibarrier 60 and paper bags were used.
Influence of iron based oxygen absorber in sachets of 500 cc
obtained from Mitsubishi Gas Chemical Europe Ageless® was tested
on the quality during the shelf of marmalade. Samples of 80±5 g
were packaged in polymer pouches (110 mm x 110 mm),
hermetically sealed by MULTIVAC C300 vacuum chamber machine,
and stored in room temperature +20.0±1.0 °C. The physiochemical
properties – weight losses, moisture content, hardness, aw, pH, colour,
changes of atmosphere content (CO2 and O2) in headspace of packs,
and microbial conditions were analysed before packaging and in the
1st, 3rd , 5th, 8th, 11th and 15th weeks of storage.
Abstract: Skin color based tracking techniques often assume a
static skin color model obtained either from an offline set of library
images or the first few frames of a video stream. These models
can show a weak performance in presence of changing lighting or
imaging conditions. We propose an adaptive skin color model based
on the Gaussian mixture model to handle the changing conditions.
Initial estimation of the number and weights of skin color clusters
are obtained using a modified form of the general Expectation
maximization algorithm, The model adapts to changes in imaging
conditions and refines the model parameters dynamically using spatial
and temporal constraints. Experimental results show that the method
can be used in effectively tracking of hand and face regions.
Abstract: In this paper we propose the study of a centrifugal pump control system driven by a three-phase induction motor, which is supplied by a PhotoVoltaic PV generator. The system includes solar panel, a DC / DC converter equipped with its MPPT control, a voltage inverter to three-phase Pulse Width Modulation - PWM and a centrifugal pump driven by a three phase induction motor. In order to control the flow of the centrifugal pump, a Direct Torque Control - DTC of the induction machine is used. To illustrate the performances of the control, simulation results are carried out using Matlab/Simulink.
Abstract: In this paper, a novel contrast enhancement technique
for contrast enhancement of a low-contrast satellite image has been
proposed based on the singular value decomposition (SVD) and
discrete cosine transform (DCT). The singular value matrix
represents the intensity information of the given image and any
change on the singular values change the intensity of the input image.
The proposed technique converts the image into the SVD-DCT
domain and after normalizing the singular value matrix; the enhanced
image is reconstructed by using inverse DCT. The visual and
quantitative results suggest that the proposed SVD-DCT method
clearly shows the increased efficiency and flexibility of the proposed
method over the exiting methods such as Linear Contrast Stretching
technique, GHE technique, DWT-SVD technique, DWT technique,
Decorrelation Stretching technique, Gamma Correction method
based techniques.
Abstract: Partitioning is a critical area of VLSI CAD. In order to build complex digital logic circuits its often essential to sub-divide multi -million transistor design into manageable Pieces. This paper looks at the various partitioning techniques aspects of VLSI CAD, targeted at various applications. We proposed an evolutionary time-series model and a statistical glitch prediction system using a neural network with selection of global feature by making use of clustering method model, for partitioning a circuit. For evolutionary time-series model, we made use of genetic, memetic & neuro-memetic techniques. Our work focused in use of clustering methods - K-means & EM methodology. A comparative study is provided for all techniques to solve the problem of circuit partitioning pertaining to VLSI design. The performance of all approaches is compared using benchmark data provided by MCNC standard cell placement benchmark net lists. Analysis of the investigational results proved that the Neuro-memetic model achieves greater performance then other model in recognizing sub-circuits with minimum amount of interconnections between them.
Abstract: One of the difficulties of the vibration-based damage identification methods is the nonuniqueness of the results of damage identification. The different damage locations and severity may cause the identical response signal, which is even more severe for detection of the multiple damage. This paper proposes a new strategy for damage detection to avoid this nonuniqueness. This strategy firstly determines the approximates damage area based on the statistical pattern recognition method using the dynamic strain signal measured by the distributed fiber Bragg grating, and then accurately evaluates the damage information based on the Bayesian model updating method using the experimental modal data. The stochastic simulation method is then used to compute the high-dimensional integral in the Bayesian problem. Finally, an experiment of the plate structure, simulating one part of mechanical structure, is used to verify the effectiveness of this approach.
Abstract: The paper deals with the analysis of triggering
conditions and evolution processes of piping phenomena, in relation
to both mechanical and hydraulic aspects. In particular, the aim of
the study is to predict slope instabilities triggered by piping,
analysing the conditions necessary for a flow failure to occur. Really,
the mechanical effect involved in the loads redistribution around the
pipe is coupled to the drainage process arising from higher
permeability of the pipe. If after the pipe formation, the drainage
goes prevented for pipe clogging, the porewater pressure increase can
lead to the failure or even the liquefaction, with a subsequent flow
slide. To simulate the piping evolution and to verify relevant stability
conditions, a iterative coupled modelling approach has been pointed
out. As example, the proposed tool has been applied to the Stava
Valley disaster (July, 1985), demonstrating that piping might be one
of triggering phenomena of the tailings dams collapse.
Abstract: Twelve lactating Etawah Crossedbred goats were used
in this study. Goat feed consisted of Cally andra callothyrsus,
Pennisetum purpureum, wheat bran and dried fermented cassava
peel. The cassava peels were fermented with a traditional culture
called “ragi tape" (mixed culture of Saccharomyces cerevisae,
Aspergillus sp, Candida, Hasnula and Acetobacter). The goats were
divided into 2 groups (Control and Treated) of six does. The
experimental diet of the Control group consisted of 70% of roughage
(fresh Callyandra callothyrsus and Pennisetum purpureum 60:40)
and 30% of wheat bran on dry matter (DM) base. In the Treated
group 30% of wheat bran was replaced with dried fermented cassava
peels. Data were statistically analyzed using analysis of variance
followed SPSS program. The concentration of HCN in fermented
cassava peel decreased to non toxic level. Nutrient composition of
dried fermented cassava peel consisted of 85.75% dry matter;
5.80% crude protein and 82.51% total digestible nutrien (TDN).
Substitution of 30% of wheat bran with dried fermented cassava peel
in the diet had no effect on dry matter and organic matter intake but
significantly (P< 0.05) decreased crude protein and TDN
consumption as well as milk yields and milk composition. The study
recommended to reduced the level of substitution to less than 30% of
concentrates in the diet in order to avoid low nutrient intake and milk
production of goats.
Abstract: Although Face detection is not a recent activity in the
field of image processing, it is still an open area for research. The
greatest step in this field is the work reported by Viola and its recent
analogous is Huang et al. Both of them use similar features and also
similar training process. The former is just for detecting upright
faces, but the latter can detect multi-view faces in still grayscale
images using new features called 'sparse feature'. Finding these
features is very time consuming and inefficient by proposed methods.
Here, we propose a new approach for finding sparse features using a
genetic algorithm system. This method requires less computational
cost and gets more effective features in learning process for face
detection that causes more accuracy.
Abstract: This paper presents an approach for an unequal error
protection of facial features of personal ID images coding. We
consider unequal error protection (UEP) strategies for the efficient
progressive transmission of embedded image codes over noisy
channels. This new method is based on the progressive image
compression embedded zerotree wavelet (EZW) algorithm and UEP
technique with defined region of interest (ROI). In this case is ROI
equal facial features within personal ID image. ROI technique is
important in applications with different parts of importance. In ROI
coding, a chosen ROI is encoded with higher quality than the
background (BG). Unequal error protection of image is provided by
different coding techniques and encoding LL band separately. In our
proposed method, image is divided into two parts (ROI, BG) that
consist of more important bytes (MIB) and less important bytes
(LIB). The proposed unequal error protection of image transmission
has shown to be more appropriate to low bit rate applications,
producing better quality output for ROI of the compresses image.
The experimental results verify effectiveness of the design. The
results of our method demonstrate the comparison of the UEP of
image transmission with defined ROI with facial features and the
equal error protection (EEP) over additive white gaussian noise
(AWGN) channel.
Abstract: Water is the key of national development. Wherever a spring has been dried out or a river has changed its course, the area-s people have migrated and have been scattered and the area-s civilization has lost its brilliance. Today, air pollution, global warming and ozone layer damage are as the problems of countries, but certainly in the next decade the shortage and pollution of waters will be important issues of the world. The polluted waters are more dangerous in when they are used in agriculture. Because they infect plants and these plants are used in human and livestock consumption in food chain. With the increasing population growth and after that, the increase need to facilities and raw materials, human beings has started to do haste actions and wanted or unwanted destroyed his life basin. They try to overuse and capture his environment extremely, instead of having futurism approach in sustainable use of nature. This process includes Zayanderood recession, and caused its pollution after the transition from industrial and urban areas. Zayandehrood River in Isfahan is a vital artery of a living ecosystem. Now is the location of disposal waste water of many cities, villages and existing industries. The central area of the province is an important industrial place, and its environmental situation has reached a critical stage. Not only a large number of pollution-generating industries are active in the city limits, but outside of the city and adjacent districts Zayandehrood River, heavy industries like steel, Mobarakeh Steel and other tens great units pollute wild life. This article tries to study contaminant sources of Zayanderood and their severity, and determine and discuss the share of each of these resources by major industrial centers located in areas. At the end, we represent suitable strategy.
Abstract: One part of the total employee’s reward is apart from basic wages or salary, employee’s benefits and intangible remuneration also so called contingent (variable) pay. Contingent pay is connected to performance, contribution, cap competency or skills of individual employees, and to team’s or company-wide performance or to combination of few of the mentioned possibilities. Sometimes among the contingent pay is also incorporated the remuneration based on length of employment, when the financial reward is not connected to performance or skills, but to length of continuous employment either on one working position or in one level of remuneration scale. Main aim of this article is to define, based on available information, contingent pay, describe individual forms, its advantages and disadvantages and possibilities to utilization in practice; but also bring information not only about its extent and level of utilization of contingent pay by companies in one of the Czech Republic’s regions, but also mention their practical experience with this type of remuneration.
Abstract: Product customization is an essential requirement for
manufacturing firms to achieve higher customers- satisfaction and
fulfill business target. In order to achieve these objectives, firms need
to handle both external varieties such as customer preference,
government regulations, cultural considerations etc and internal
varieties such as functional requirements of product, production
efficiency, quality etc. Both of the varieties need to be accumulated
and integrated together for the purpose of producing customized
product. These varieties are presented and discussed in this paper
along with the perspectives of modular product design and
development process. Other development strategies such as
modularity, component commonality, product family design and
product platform are presented with a view to achieve product variety
quickly and economically. A case example both for the concept of
modular design and platform based product development process is
also presented with the help of design structure matrix (DSM) tool.
This paper is concluded with several managerial implications and
future research direction.
Abstract: The need for multilingual communication in Japan has
increased due to an increase in the number of foreigners in the
country. When people communicate in their nonnative language,
the differences in language prevent mutual understanding among
the communicating individuals. In the medical field, communication
between the hospital staff and patients is a serious problem. Currently,
medical translators accompany patients to medical care facilities, and
the demand for medical translators is increasing. However, medical
translators cannot necessarily provide support, especially in cases in
which round-the-clock support is required or in case of emergencies.
The medical field has high expectations from information technology.
Hence, a system that supports accurate multilingual communication is
required. Despite recent advances in machine translation technology,
it is very difficult to obtain highly accurate translations. We have
developed a support system called M3 for multilingual medical
reception. M3 provides support functions that aid foreign patients in
the following respects: conversation, questionnaires, reception procedures,
and hospital navigation; it also has a Q&A function. Users
can operate M3 using a touch screen and receive text-based support.
In addition, M3 uses accurate translation tools called parallel texts
to facilitate reliable communication through conversations between
the hospital staff and the patients. However, if there is no parallel
text that expresses what users want to communicate, the users cannot
communicate. In this study, we have developed a circulating support
environment for multilingual medical communication using parallel
texts. The proposed environment can circulate necessary parallel texts
through the following procedure: (1) a user provides feedback about
the necessary parallel texts, following which (2) these parallel texts
are created and evaluated.