Abstract: Two algorithms are proposed to reduce the storage requirements for mammogram images. The input image goes through a shrinking process that converts the 16-bit images to 8-bits by using pixel-depth conversion algorithm followed by enhancement process. The performance of the algorithms is evaluated objectively and subjectively. A 50% reduction in size is obtained with no loss of significant data at the breast region.
Abstract: Purpose: Planning and dosimetry of different VMAT algorithms (SmartArc, Ergo++, Autobeam) is compared with IMRT for Head and Neck Cancer patients. Modelling was performed to rule out the causes of discrepancies between planned and delivered dose. Methods: Five HNC patients previously treated with IMRT were re-planned with SmartArc (SA), Ergo++ and Autobeam. Plans were compared with each other and against IMRT and evaluated using DVHs for PTVs and OARs, delivery time, monitor units (MU) and dosimetric accuracy. Modelling of control point (CP) spacing, Leaf-end Separation and MLC/Aperture shape was performed to rule out causes of discrepancies between planned and delivered doses. Additionally estimated arc delivery times, overall plan generation times and effect of CP spacing and number of arcs on plan generation times were recorded. Results: Single arc SmartArc plans (SA4d) were generally better than IMRT and double arc plans (SA2Arcs) in terms of homogeneity and target coverage. Double arc plans seemed to have a positive role in achieving improved Conformity Index (CI) and better sparing of some Organs at Risk (OARs) compared to Step and Shoot IMRT (ss-IMRT) and SA4d. Overall Ergo++ plans achieved best CI for both PTVs. Dosimetric validation of all VMAT plans without modelling was found to be lower than ss-IMRT. Total MUs required for delivery were on average 19%, 30%, 10.6% and 6.5% lower than ss-IMRT for SA4d, SA2d (Single arc with 20 Gantry Spacing), SA2Arcs and Autobeam plans respectively. Autobeam was most efficient in terms of actual treatment delivery times whereas Ergo++ plans took longest to deliver. Conclusion: Overall SA single arc plans on average achieved best target coverage and homogeneity for both PTVs. SA2Arc plans showed improved CI and some OARs sparing. Very good dosimetric results were achieved with modelling. Ergo++ plans achieved best CI. Autobeam resulted in fastest treatment delivery times.
Abstract: In this paper, a new hybrid of genetic algorithm (GA)
and simulated annealing (SA), referred to as GSA, is presented. In
this algorithm, SA is incorporated into GA to escape from local
optima. The concept of hierarchical parallel GA is employed to
parallelize GSA for the optimization of multimodal functions. In
addition, multi-niche crowding is used to maintain the diversity in
the population of the parallel GSA (PGSA). The performance of the
proposed algorithms is evaluated against a standard set of multimodal
benchmark functions. The multi-niche crowding PGSA and normal
PGSA show some remarkable improvement in comparison with the
conventional parallel genetic algorithm and the breeder genetic
algorithm (BGA).
Abstract: Phylogenetic tree is a graphical representation of the
evolutionary relationship among three or more genes or organisms.
These trees show relatedness of data sets, species or genes
divergence time and nature of their common ancestors. Quality of a
phylogenetic tree requires parsimony criterion. Various approaches
have been proposed for constructing most parsimonious trees. This
paper is concerned about calculating and optimizing the changes of
state that are needed called Small Parsimony Algorithms. This paper
has proposed enhanced small parsimony algorithm to give better
score based on number of evolutionary changes needed to produce
the observed sequence changes tree and also give the ancestor of the
given input.
Abstract: In this paper we have proposed a novel dynamic least cost multicast routing protocol using hybrid genetic algorithm for IP networks. Our protocol finds the multicast tree with minimum cost subject to delay, degree, and bandwidth constraints. The proposed protocol has the following features: i. Heuristic local search function has been devised and embedded with normal genetic operation to increase the speed and to get the optimized tree, ii. It is efficient to handle the dynamic situation arises due to either change in the multicast group membership or node / link failure, iii. Two different crossover and mutation probabilities have been used for maintaining the diversity of solution and quick convergence. The simulation results have shown that our proposed protocol generates dynamic multicast tree with lower cost. Results have also shown that the proposed algorithm has better convergence rate, better dynamic request success rate and less execution time than other existing algorithms. Effects of degree and delay constraints have also been analyzed for the multicast tree interns of search success rate.
Abstract: In this work we develop an object extraction method
and propose efficient algorithms for object motion characterization.
The set of proposed tools serves as a basis for development of objectbased
functionalities for manipulation of video content. The
estimators by different algorithms are compared in terms of quality
and performance and tested on real video sequences. The proposed
method will be useful for the latest standards of encoding and
description of multimedia content – MPEG4 and MPEG7.
Abstract: One of the main environmental problems which affect extensive areas in the world is soil salinity. Traditional data collection methods are neither enough for considering this important environmental problem nor accurate for soil studies. Remote sensing data could overcome most of these problems. Although satellite images are commonly used for these studies, however there are still needs to find the best calibration between the data and real situations in each specified area. Neyshaboor area, North East of Iran was selected as a field study of this research. Landsat satellite images for this area were used in order to prepare suitable learning samples for processing and classifying the images. 300 locations were selected randomly in the area to collect soil samples and finally 273 locations were reselected for further laboratory works and image processing analysis. Electrical conductivity of all samples was measured. Six reflective bands of ETM+ satellite images taken from the study area in 2002 were used for soil salinity classification. The classification was carried out using common algorithms based on the best composition bands. The results showed that the reflective bands 7, 3, 4 and 1 are the best band composition for preparing the color composite images. We also found out, that hybrid classification is a suitable method for identifying and delineation of different salinity classes in the area.
Abstract: SoftBoost is a recently presented boosting algorithm,
which trades off the size of achieved classification margin and
generalization performance. This paper presents a performance
evaluation of SoftBoost algorithm on the generic object recognition
problem. An appearance-based generic object recognition
model is used. The evaluation experiments are performed using
a difficult object recognition benchmark. An assessment with respect
to different degrees of label noise as well as a comparison to
the well known AdaBoost algorithm is performed. The obtained
results reveal that SoftBoost is encouraged to be used in cases
when the training data is known to have a high degree of noise.
Otherwise, using Adaboost can achieve better performance.
Abstract: Speed estimation is one of the important and practical tasks in machine vision, Robotic and Mechatronic. the availability of high quality and inexpensive video cameras, and the increasing need for automated video analysis has generated a great deal of interest in machine vision algorithms. Numerous approaches for speed estimation have been proposed. So classification and survey of the proposed methods can be very useful. The goal of this paper is first to review and verify these methods. Then we will propose a novel algorithm to estimate the speed of moving object by using fuzzy concept. There is a direct relation between motion blur parameters and object speed. In our new approach we will use Radon transform to find direction of blurred image, and Fuzzy sets to estimate motion blur length. The most benefit of this algorithm is its robustness and precision in noisy images. Our method was tested on many images with different range of SNR and is satisfiable.
Abstract: This paper introduces a new variable step-size APA with decorrelation of AR input process is based on the MSD analysis. To achieve a fast convergence rate and a small steady-state estimation error, he proposed algorithm uses variable step size that is determined by minimising the MSD. In addition, experimental results show that the proposed algorithm is achieved better performance than the other algorithms.
Abstract: The use of the oncologic index ISTER allows for a more effective planning of the radiotherapic facilities in the hospitals. Any change in the radiotherapy treatment, due to unexpected stops, may be adapted by recalculating the doses to the new treatment duration while keeping the optimal prognosis. The results obtained in a simulation model on millions of patients allow the definition of optimal success probability algorithms.
Abstract: Nowadays, the challenge in hydraulic turbine design is
the multi-objective design of turbine runner to reach higher
efficiency. The hydraulic performance of a turbine is strictly depends
on runner blades shape. The present paper focuses on the application
of the multi-objective optimization algorithm to the design of a small
Francis turbine runner. The optimization exercise focuses on the
efficiency improvement at the best efficiency operating point (BEP)
of the GAMM Francis turbine. A global optimization method based
on artificial neural networks (ANN) and genetic algorithms (GA)
coupled by 3D Navier-Stokes flow solver has been used to improve
the performance of an initial geometry of a Francis runner. The
results show the good ability of optimization algorithm and the final
geometry has better efficiency with initial geometry. The goal was to
optimize the geometry of the blades of GAMM turbine runner which
leads to maximum total efficiency by changing the design parameters
of camber line in at least 5 sections of a blade. The efficiency of the
optimized geometry is improved from 90.7% to 92.5%. Finally,
design parameters and the way of selection have been considered and
discussed.
Abstract: This paper employs a new approach to regulate the
blood glucose level of type I diabetic patient under an intensive
insulin treatment. The closed-loop control scheme incorporates
expert knowledge about treatment by using reinforcement learning
theory to maintain the normoglycemic average of 80 mg/dl and the
normal condition for free plasma insulin concentration in severe
initial state. The insulin delivery rate is obtained off-line by using Qlearning
algorithm, without requiring an explicit model of the
environment dynamics. The implementation of the insulin delivery
rate, therefore, requires simple function evaluation and minimal
online computations. Controller performance is assessed in terms of
its ability to reject the effect of meal disturbance and to overcome the
variability in the glucose-insulin dynamics from patient to patient.
Computer simulations are used to evaluate the effectiveness of the
proposed technique and to show its superiority in controlling
hyperglycemia over other existing algorithms
Abstract: The goal of this project is to design a system to
recognition voice commands. Most of voice recognition systems
contain two main modules as follow “feature extraction" and “feature
matching". In this project, MFCC algorithm is used to simulate
feature extraction module. Using this algorithm, the cepstral
coefficients are calculated on mel frequency scale. VQ (vector
quantization) method will be used for reduction of amount of data to
decrease computation time. In the feature matching stage Euclidean
distance is applied as similarity criterion. Because of high accuracy
of used algorithms, the accuracy of this voice command system is
high. Using these algorithms, by at least 5 times repetition for each
command, in a single training session, and then twice in each testing
session zero error rate in recognition of commands is achieved.
Abstract: Investment in a constructed facility represents a cost in
the short term that returns benefits only over the long term use of the
facility. Thus, the costs occur earlier than the benefits, and the owners
of facilities must obtain the capital resources to finance the costs of
construction. A project cannot proceed without an adequate
financing, and the cost of providing an adequate financing can be
quite large. For these reasons, the attention to the project finance is an
important aspect of project management. Finance is also a concern to
the other organizations involved in a project such as the general
contractor and material suppliers. Unless an owner immediately and
completely covers the costs incurred by each participant, these
organizations face financing problems of their own. At a more
general level, the project finance is the only one aspect of the general
problem of corporate finance. If numerous projects are considered
and financed together, then the net cash flow requirements constitute
the corporate financing problem for capital investment. Whether
project finance is performed at the project or at the corporate level
does not alter the basic financing problem .In this paper, we will first
consider facility financing from the owner's perspective, with due
consideration for its interaction with other organizations involved in a
project. Later, we discuss the problems of construction financing
which are crucial to the profitability and solvency of construction
contractors. The objective of this paper is to present the steps utilized
to determine the best combination of minimum project financing.
The proposed model considers financing; schedule and maximum net
area .The proposed model is called Project Financing and Schedule
Integration using Genetic Algorithms "PFSIGA". This model
intended to determine more steps (maximum net area) for any project
with a subproject. An illustrative example will demonstrate the
feature of this technique. The model verification and testing are put
into consideration.
Abstract: In some real applications of Statistical Process Control
it is necessary to design a control chart to not detect small process
shifts, but keeping a good performance to detect moderate and large
shifts in the quality. In this work we develop a new quality control
chart, the synthetic T2 control chart, that can be designed to cope with
this objective. A multi-objective optimization is carried out employing
Genetic Algorithms, finding the Pareto-optimal front of
non-dominated solutions for this optimization problem.
Abstract: By introducing the concept of Oracle we propose an approach for improving the performance of genetic algorithms for large-scale asymmetric Traveling Salesman Problems. The results have shown that the proposed approach allows overcoming some traditional problems for creating efficient genetic algorithms.
Abstract: Finite impulse response (FIR) filters have the advantage of linear phase, guaranteed stability, fewer finite precision errors, and efficient implementation. In contrast, they have a major disadvantage of high order need (more coefficients) than IIR counterpart with comparable performance. The high order demand imposes more hardware requirements, arithmetic operations, area usage, and power consumption when designing and fabricating the filter. Therefore, minimizing or reducing these parameters, is a major goal or target in digital filter design task. This paper presents an algorithm proposed for modifying values and the number of non-zero coefficients used to represent the FIR digital pulse shaping filter response. With this algorithm, the FIR filter frequency and phase response can be represented with a minimum number of non-zero coefficients. Therefore, reducing the arithmetic complexity needed to get the filter output. Consequently, the system characteristic i.e. power consumption, area usage, and processing time are also reduced. The proposed algorithm is more powerful when integrated with multiplierless algorithms such as distributed arithmetic (DA) in designing high order digital FIR filters. Here the DA usage eliminates the need for multipliers when implementing the multiply and accumulate unit (MAC) and the proposed algorithm will reduce the number of adders and addition operations needed through the minimization of the non-zero values coefficients to get the filter output.
Abstract: The evaluation of residual reliability of large sized
parallel computer interconnection systems is not practicable with
the existing methods. Under such conditions, one must go for
approximation techniques which provide the upper bound and lower
bound on this reliability. In this context, a new approximation method
for providing bounds on residual reliability is proposed here. The
proposed method is well supported by two algorithms for simulation
purpose. The bounds on residual reliability of three different categories
of interconnection topologies are efficiently found by using
the proposed method
Abstract: The purposes of this paper are to (1) promote excellence in computer science by suggesting a cohesive innovative approach to fill well documented deficiencies in current computer science education, (2) justify (using the authors' and others anecdotal evidence from both the classroom and the real world) why this approach holds great potential to successfully eliminate the deficiencies, (3) invite other professionals to join the authors in proof of concept research. The authors' experiences, though anecdotal, strongly suggest that a new approach involving visual modeling technologies should allow computer science programs to retain a greater percentage of prospective and declared majors as students become more engaged learners, more successful problem-solvers, and better prepared as programmers. In addition, the graduates of such computer science programs will make greater contributions to the profession as skilled problem-solvers. Instead of wearily rememorizing code as they move to the next course, students will have the problem-solving skills to think and work in more sophisticated and creative ways.