Abstract: In this paper, the difference between the Alternating
Direction Method (ADM) and the Non-Splitting Method (NSM) is
investigated, while both methods applied to the simulations for 2-D
multimaterial radiation diffusion issues. Although the ADM have the
same accuracy orders with the NSM on the uniform meshes, the
accuracy of ADM will decrease on the distorted meshes or the
boundary of domain. Numerical experiments are carried out to
confirm the theoretical predication.
Abstract: This paper presents the experimental results on
ageing deterioration of silicone rubber outdoor polymer insulator
under salt water dip wheel test based on IEC 62217. In order to comparison effect of chemical contents, silicone rubber outdoor
polymer insulators having same configuration and leakage distant
from two manufactures were tested together continuously 30,000 test cycles. Many discharge activities were observed in during the test.
After 30,000 test cycles, in spite of same configuration, differences in
degree of surface aging were observed. Physical analysis such as
decreasing in hydrophobicity and increasing in hardness
measurement were measured on two-type tested specimen surface in order to confirm degree of surface ageing. Furthermore, chemical
analysis by ATR-FTIR to diagnose the chemical change of tested
specimen surface was conducted to confirm the physical analysis results.
Abstract: Numerical study is performed to investigate the
temperature distribution in an annular diffuser fitted with helical tape
hub. Different pitches (Y = 20 mm, and Y = 30 mm) for the helical
tape are studied with different heights (H = 20 mm, 22 mm, and 24
mm) to be compared. The geometry of the annular diffuser and the
inlet condition for both hub arrangements are kept constant. The
result obtains that using helical tape insert with different pitches and
different heights will force the temperature to distribute in a helical
direction; however the use of helical tape hub with height (H = 22
mm) for both pitches enhance the temperature distribution in a good
manner.
Abstract: The scroll pump belongs to the category of positive
displacement pump can be used for continuous pumping of gases at
low pressure apart from general vacuum application. The shape of
volume occupied by the gas moves and deforms continuously as the
spiral orbits. To capture flow features in such domain where mesh
deformation varies with time in a complicated manner, mesh less
solver was found to be very useful. Least Squares Kinetic Upwind
Method (LSKUM) is a kinetic theory based mesh free Euler solver
working on arbitrary distribution of points. Here upwind is enforced
in molecular level based on kinetic flux vector splitting scheme
(KFVS). In the present study we extended the LSKUM to moving
node viscous flow application. This new code LSKUM-NS-MN for
moving node viscous flow is validated for standard airfoil pitching
test case. Simulation performed for flow through scroll pump using
LSKUM-NS-MN code agrees well with the experimental pumping
speed data.
Abstract: A procedural-animation-based approach which rapidly
synthesize the adaptive locomotion for quadruped characters that they
can walk or run in any directions on an uneven terrain within a
dynamic environment was proposed. We devise practical motion
models of the quadruped animals for adapting to a varied terrain in a
real-time manner. While synthesizing locomotion, we choose the
corresponding motion models by means of the footstep prediction of
the current state in the dynamic environment, adjust the key-frames of
the motion models relying on the terrain-s attributes, calculate the
collision-free legs- trajectories, and interpolate the key-frames
according to the legs- trajectories. Finally, we apply dynamic time
warping to each part of motion for seamlessly concatenating all desired
transition motions to complete the whole locomotion. We reduce the
time cost of producing the locomotion and takes virtual characters to
fit in with dynamic environments no matter when the environments are
changed by users.
Abstract: The main objective of the present paper is to derive an easy numerical technique for the analysis of the free vibration through the stepped regions of plates. Based on the utilities of the step by step integration initial values IV and Finite differences FD methods, the present improved Initial Value Finite Differences (IVFD) technique is achieved. The first initial conditions are formulated in convenient forms for the step by step integrations while the upper and lower edge conditions are expressed in finite difference modes. Also compatibility conditions are created due to the sudden variation of plate thickness. The present method (IVFD) is applied to solve the fourth order partial differential equation of motion for stepped plate across two different panels under the sudden step compatibility in addition to different types of end conditions. The obtained results are examined and the validity of the present method is proved showing excellent efficiency and rapid convergence.
Abstract: Sowing date and density are two important factors in
produce of coriander. A field experiment was conducted with
treatments: sowing time (5 May, 20 May, 4 June and 19 June 2009)
and plant density (10, 30, 50 and 70 plants m-2). The experimental
plots were laid out in a factorial according to a RCBD with three
replications. Results showed that the effect of sowing dates and
densities were significant on grain yield and yield components, but
interaction effects between sowing time and density were non
significant for all of traits in this trial. At sowing times 5 May, 20
May, 4 June and 19 June, grain yield obtained 736.9, 837.8, 1003.1
and 1299.6 kg ha-1, respectively. At 10, 30, 50 and 70 plants m-2,
grain yield were 794.9, 1031.0, 1092.3 and 959.3 kg ha-1,
respectively. In this experiment, sowing at 19 June and 50 and 30
plants m-2 had the most grain yield.
Abstract: 15 strains of oil-destructing microorganisms were
isolated from oil polluted soil of Western Kazakhstan. Strains 2-A
and 41-3 with the highest oil-destructing activities were chosen from
them. It was shown that these strains oxidized n-alkanes very well,
but isoalkanes, isoparaffin, cycloparaffin and heavy aromatic
compounds were destructed very slowly. These both strains were
tested as preparations for bioremediation of oil-polluted soil in model
and field experiments. The degree of utilizing of soil oil by this
preparation was 79-84 % in field experiments.
Abstract: Modeling the behavior of the dialogue management in
the design of a spoken dialogue system using statistical methodologies
is currently a growing research area. This paper presents a work
on developing an adaptive learning approach to optimize dialogue
strategy. At the core of our system is a method formalizing dialogue
management as a sequential decision making under uncertainty whose
underlying probabilistic structure has a Markov Chain. Researchers
have mostly focused on model-free algorithms for automating the
design of dialogue management using machine learning techniques
such as reinforcement learning. But in model-free algorithms there
exist a dilemma in engaging the type of exploration versus exploitation.
Hence we present a model-based online policy learning
algorithm using interconnected learning automata for optimizing
dialogue strategy. The proposed algorithm is capable of deriving
an optimal policy that prescribes what action should be taken in
various states of conversation so as to maximize the expected total
reward to attain the goal and incorporates good exploration and
exploitation in its updates to improve the naturalness of humancomputer
interaction. We test the proposed approach using the most
sophisticated evaluation framework PARADISE for accessing to the
railway information system.
Abstract: For today-s and future wireless communications applications,
more and more data traffic has to be transmitted with
growing speed and quality demands. The analog front-end of any
mobile device has to cope with very hard specifications regardless
which transmission standard has to be supported. State-of-the-art
analog front-end implementations are reaching the limit of technical
feasibility. For that reason, alternative front-end architectures could
support a continuing development of mobile communications e.g.,
six-port-based front-ends [1], [2].
In this article we propose an analog front-end with high intermediate
frequency and which utilizes additive mixing instead
of multiplicative mixing. The system architecture is presented and
several spurious effects as well as their influence on the system
dimensioning are discussed. Furthermore, several issues concerning
the technical feasibility are provided and some simulation results
are discussed which show the principle functionality of the proposed
superposition heterodyne receiver.
Abstract: (Bi0.5Na0.5)TiO3 doped with 8 mol % BaTiO3 powder
(BNT-BT0.08), prepared by sol-gel method was compacted and
sintered by Spark Plasma Sintering (SPS) process. The influence of
SPS temperature on the densification of BNT-BT0.08 ceramic was
investigated. Starting from sol-gel nanopowder of BNT-BT
containing 8 mol % BaTiO3 with an average particles size of about
30 nm, were obtained ceramics with density around 98 % of the
theoretical density value when the SPS temperature used was about
850 °C. The average grain size of the resulting ceramics was 80 nm.
The BNT-BT0.08 ceramic sample obtained by SPS method has shown
good electric properties at various frequencies.
Abstract: The use of Quantum dots is a promising emerging
Technology for implementing digital system at the nano level. It is
effecient for attractive features such as faster speed , smaller size and
low power consumption than transistor technology. In this paper,
various Combinational and sequential logical structures - HALF
ADDER, SR Latch and Flip-Flop, D Flip-Flop preceding NAND,
NOR, XOR,XNOR are discussed based on QCA design, with
comparatively less number of cells and area. By applying these
layouts, the hardware requirements for a QCA design can be reduced.
These structures are designed and simulated using QCA Designer
Tool. By taking full advantage of the unique features of this
technology, we are able to create complete circuits on a single layer
of QCA. Such Devices are expected to function with ultra low
power Consumption and very high speeds.
Abstract: Design Patterns have gained more and more
acceptances since their emerging in software development world last
decade and become another de facto standard of essential knowledge
for Object-Oriented Programming developers nowadays.
Their target usage, from the beginning, was for regular computers,
so, minimizing power consumption had never been a concern.
However, in this decade, demands of more complicated software for
running on mobile devices has grown rapidly as the much higher
performance portable gadgets have been supplied to the market
continuously. To get along with time to market that is business
reason, the section of software development for power conscious,
battery, devices has shifted itself from using specific low-level
languages to higher level ones. Currently, complicated software
running on mobile devices are often developed by high level
languages those support OOP concepts. These cause the trend of
embracing Design Patterns to mobile world.
However, using Design Patterns directly in software development
for power conscious systems is not recommended because they were
not originally designed for such environment. This paper
demonstrates the adapted Design Pattern for power limitation system.
Because there are numerous original design patterns, it is not possible
to mention the whole at once. So, this paper focuses only in creating
Energy Conscious version of existing regular "Builder Pattern" to be
appropriated for developing low power consumption software.
Abstract: High building constructions are increasing in south
beaches of the Caspian Sea because of tourist attractions and limitation of residential areas. According to saturated alluvial fields transfer of load from high structures to the soil by piles is inevitable.
In spite of most of these piles are under compression forces, tension piles are used in special conditions. Few studies have been conducted
because of the limited use of these piles. Tension capacity of openended pipe piles in full scale was tested in this study. The length of the bored piles was 420 up to 480 cm and all were in 120 cm
diameter. The results of testing 7 piles were compared with the results of relations given by researches.
Abstract: Both image steganography and image encryption have
advantages and disadvantages. Steganograhy allows us to hide a
desired image containing confidential information in a covered or
host image while image encryption is decomposing the desired image
to a non-readable, non-comprehended manner. The encryption
methods are usually much more robust than the steganographic ones.
However, they have a high visibility and would provoke the attackers
easily since it usually is obvious from an encrypted image that
something is hidden! The combination of steganography and
encryption will cover both of their weaknesses and therefore, it
increases the security. In this paper an image encryption method
based on sinc-convolution along with using an encryption key of 128
bit length is introduced. Then, the encrypted image is covered by a
host image using a modified version of JSteg steganography
algorithm. This method could be applied to almost all image formats
including TIF, BMP, GIF and JPEG. The experiment results show
that our method is able to hide a desired image with high security and
low visibility.
Abstract: Plant tissue culture is an important in vitro technology applied for agricultural and industrial production. A sterile condition of culture medium is one of the main aspects. The alternative technique for medium sterilization to replace autoclaving was carried out. For sterilization of plant tissue culture medium without autoclaving, ten commercial pure essential oils and 5 disinfectants were tested. Each essential oil or disinfectant was added to a 20-mL Murashige and Skoog (MS) medium before medium was solidified in a 120-mL container, kept for 2 weeks before evaluating sterile conditions. Treated media, supplemented with essential oils or disinfectants, were compared to control medium, autoclaved at 121 degree Celsius for 15 min. Sterile conditions of MS medium were found 100% from betel oil or clove oil (18 mL/20 mL medium), cinnamon oil (36 mL/20 mL medium), lavender oil or holy basil oil (108 mL/20 mL medium), and lemon oil or tea tree oil or turmeric oil (252 mL/20 mL medium), compared to 100% sterile condition from autoclaved medium. For disinfectants, 2% iodine + 2.4% potassium iodide, 2% merbromine solution, 10% povidone-iodine, 6% sodium hypochlorite or 0.1% thimerosal at 36 mL/20 mL medium provided 100% sterile conditions. Furthermore, growth of new shoots from chrysanthemum node explants on treated media (fresh weight, shoot length, root length and number of node) were also reported and discussed in the comparison of those on autoclaved medium.
Abstract: In recent years, an increased competition and lower profit margins have necessitated a focus on improving the performance of the product development process, an area that traditionally have been excluded from detailed steering and evaluation. A systematic improvement requires a good understanding of the current performance, wherefore the interest for product development performance measurement has increased dramatically. This paper presents a case study that evaluates the performance of the product development performance measurement system used in a Swedish company that is a part of a global corporate group. The study is based on internal documentation and eighteen in-depth interviews with stakeholders involved in the product development process. The results from the case study includes a description of what metrics that are in use, how these are employed, and its affect on the quality of the performance measurement system. Especially, the importance of having a well-defined process proved to have a major impact on the quality of the performance measurement system in this particular case.
Abstract: In the context of spectrum surveillance, a new method
to recover the code of spread spectrum signal is presented, while the
receiver has no knowledge of the transmitter-s spreading sequence. In
our previous paper, we used Genetic algorithm (GA), to recover
spreading code. Although genetic algorithms (GAs) are well known
for their robustness in solving complex optimization problems, but
nonetheless, by increasing the length of the code, we will often lead
to an unacceptable slow convergence speed. To solve this problem we
introduce Particle Swarm Optimization (PSO) into code estimation in
spread spectrum communication system. In searching process for
code estimation, the PSO algorithm has the merits of rapid
convergence to the global optimum, without being trapped in local
suboptimum, and good robustness to noise. In this paper we describe
how to implement PSO as a component of a searching algorithm in
code estimation. Swarm intelligence boasts a number of advantages
due to the use of mobile agents. Some of them are: Scalability, Fault
tolerance, Adaptation, Speed, Modularity, Autonomy, and
Parallelism. These properties make swarm intelligence very attractive
for spread spectrum code estimation. They also make swarm
intelligence suitable for a variety of other kinds of channels. Our
results compare between swarm-based algorithms and Genetic
algorithms, and also show PSO algorithm performance in code
estimation process.
Abstract: In this work, axisymetric CFD simulation of fixed bed
GTL reactor has been conducted, using computational fluid dynamics
(CFD). In fixed bed CFD modeling, when N (tube-to-particle
diameter ratio) has a large value, it is common to consider the packed
bed as a porous media. Synthesis gas (a mixture of predominantly
carbon monoxide and hydrogen) was fed to the reactor. The reactor
length was 20 cm, divided to three sections. The porous zone was in
the middle section of the reactor. The model equations were solved
employing finite volume method. The effects of particle diameter,
bed voidage, fluid velocity and bed length on pressure drop have
been investigated. Simulation results showed these parameters could
have remarkable impacts on the reactor pressure drop.
Abstract: The objective of the paper was to understand the use
of an important element of design, namely color in a Semiotic
system. Semiotics is the study of signs and sign processes, it is often
divided into three branches namely (i) Semantics that deals with the
relation between signs and the things to which they refer to mean, (ii)
Syntactics which addresses the relations among signs in formal
structures and (iii) Pragmatics that relates between signs and its
effects on they have on the people who use them to create a plan for
an object or a system referred to as design. Cubism with its versatility
was the key design tool prevalent across the 20th century. In order to
analyze the user's understanding of interaction and appreciation of
color through the movement of Cubism, an exercise was undertaken
in Dept. of Design, IIT Guwahati. This included tasks to design a
composition using color and sign process to the theme 'Between the
Lines' on a given tessellation where the users relate their work to the
world they live in, which in this case was the college campus of IIT
Guwahati. The findings demonstrate impact of the key design
element color on the principles of visual perception based on image
analysis of specific compositions.