Abstract: Numerical investigation of flow around a square cylinder are presented using the multi-relaxation-time lattice Boltzmann methods at different Reynolds numbers. A detail analysis are given in terms of time-trace analysis of drag and lift coefficients, power spectra analysis of lift coefficient, vorticity contours visualizations, streamlines and phase diagrams. A number of physical quantities mean drag coefficient, drag coefficient, Strouhal number and root-mean-square values of drag and lift coefficients are calculated and compared with the well resolved experimental data and numerical results available in open literature. The Reynolds numbers affected the physical quantities.
Abstract: This paper presents findings from the evaluation study carried out to review the UAE national ID card software. The paper consults the relevant literature to explain many of the concepts and frameworks explained herein. The findings of the evaluation work that was primarily based on the ISO 9126 standard for system quality measurement highlighted many practical areas that if taken into account is argued to more likely increase the success chances of similar system implementation projects.
Abstract: The aim of this study was to develop a storm water quality improvement strategy plan (WQISP) which assists managers and decision makers of local city councils in enhancing their activities to improve regional water quality. City of Gosnells in Western Australia has been considered as a case study. The procedure on developing the WQISP consists of reviewing existing water quality data, identifying water quality issues in the study areas and developing a decision making tool for the officers, managers and decision makers. It was found that land use type is the main factor affecting the water quality. Therefore, activities, sources and pollutants related to different land use types including residential, industrial, agricultural and commercial are given high importance during the study. Semi-structured interviews were carried out with coordinators of different management sections of the regional councils in order to understand the associated management framework and issues. The issues identified from these interviews were used in preparing the decision making tool. Variables associated with the defined “value versus threat" decision making tool are obtained from the intensive literature review. The main recommendations provided for improvement of water quality in local city councils, include non-structural, structural and management controls and potential impacts of climate change.
Abstract: In this paper, the optimum weight and cost of a laminated composite plate is seeked, while it undergoes the heaviest load prior to a complete failure. Various failure criteria are defined for such structures in the literature. In this work, the Tsai-Hill theory is used as the failure criterion. The theory of analysis was based on the Classical Lamination Theory (CLT). A newly type of Genetic Algorithm (GA) as an optimization technique with a direct use of real variables was employed. Yet, since the optimization via GAs is a long process, and the major time is consumed through the analysis, Radial Basis Function Neural Networks (RBFNN) was employed in predicting the output from the analysis. Thus, the process of optimization will be carried out through a hybrid neuro-GA environment, and the procedure will be carried out until a predicted optimum solution is achieved.
Abstract: Sensitive and predictive DILI (Drug Induced Liver
Injury) biomarkers are needed in drug R&D to improve early
detection of hepatotoxicity. The discovery of DILI biomarkers that
demonstrate the predictive power to identify individuals at risk to
DILI would represent a major advance in the development of
personalized healthcare approaches. In this healthy volunteer
acetaminophen study (4g/day for 7 days, with 3 monitored nontreatment
days before and 4 after), 450 serum samples from 32
subjects were analyzed using protein profiling by antibody
suspension bead arrays. Multiparallel protein profiles were generated
using a DILI target protein array with 300 antibodies, where the
antibodies were selected based on previous literature findings of
putative DILI biomarkers and a screening process using pre dose
samples from the same cohort. Of the 32 subjects, 16 were found to
develop an elevated ALT value (2Xbaseline, responders). Using the
plasma profiling approach together with multivariate statistical
analysis some novel findings linked to lipid metabolism were found
and more important, endogenous protein profiles in baseline samples
(prior to treatment) with predictive power for ALT elevations were
identified.
Abstract: Project selection problems on management
information system (MIS) are often considered a multi-criteria
decision-making (MCDM) for a solving method. These problems
contain two aspects, such as interdependencies among criteria and
candidate projects and qualitative and quantitative factors of projects.
However, most existing methods reported in literature consider these
aspects separately even though these two aspects are simultaneously
incorporated. For this reason, we proposed a hybrid method using
analytic network process (ANP) and fuzzy logic in order to represent
both aspects. We then propose a goal programming model to conduct
an optimization for the project selection problems interpreted by a
hybrid concept. Finally, a numerical example is conducted as
verification purposes.
Abstract: The Knowledge Management (KM) Criteria is an
essential foundation to evaluate KM outcomes. Different sets of
criteria were developed and tailored by many researchers to
determine the results of KM initiatives. However, literature review
has emphasized on incomplete set of criteria for evaluating KM
outcomes. Hence, this paper tried to address the problem of
determining the criteria for measuring knowledge management
outcomes among different types of Malaysian organizations.
Successively, this paper was assumed to develop widely accepted
criteria to measure success of knowledge management efforts for
Malaysian organizations. Our analysis approach was based on the
ANOVA procedure to compare a set of criteria among different types
of organizations. This set of criteria was exploited from literature
review. It is hoped that this study provides a better picture for
different types of Malaysian organizations to establish a
comprehensive set of criteria due to measure results of KM programs.
Abstract: In this paper the problem of face recognition under variable illumination conditions is considered. Most of the works in the literature exhibit good performance under strictly controlled acquisition conditions, but the performance drastically drop when changes in pose and illumination occur, so that recently number of approaches have been proposed to deal with such variability. The aim of this work is to introduce an efficient local appearance feature extraction method based steerable pyramid (SP) for face recognition. Local information is extracted from SP sub-bands using LBP(Local binary Pattern). The underlying statistics allow us to reduce the required amount of data to be stored. The experiments carried out on different face databases confirm the effectiveness of the proposed approach.
Abstract: The innovation performance of nations has been
repeatedly measured in the literature. We argue that while the
literature offers many suggestions, their theoretical foundation is
often weak and the underlying assumptions are rarely discussed. In
this paper, we systematize various mechanisms by which spatial units
influence nation and firms' innovation activities. On the basis of this,
common innovation performance measures and analyses are
discussed and evaluated. It is concluded that there is no general best
way of measuring the innovation performance of spatial units. In
fact, the most interesting insights can be obtained using a multitude
of different approaches at the same time.
Abstract: Computer aided design accounts with the support of
parametric software in the design of machine components as well as
of any other pieces of interest. The complexities of the element under
study sometimes offer certain difficulties to computer design, or ever
might generate mistakes in the final body conception. Reverse
engineering techniques are based on the transformation of already
conceived body images into a matrix of points which can be
visualized by the design software. The literature exhibits several
techniques to obtain machine components dimensional fields, as
contact instrument (MMC), calipers and optical methods as laser
scanner, holograms as well as moiré methods. The objective of this
research work was to analyze the moiré technique as instrument of
reverse engineering, applied to bodies of nom complex geometry as
simple solid figures, creating matrices of points. These matrices were
forwarded to a parametric software named SolidWorks to generate
the virtual object. Volume data obtained by mechanical means, i.e.,
by caliper, the volume obtained through the moiré method and the
volume generated by the SolidWorks software were compared and
found to be in close agreement. This research work suggests the
application of phase shifting moiré methods as instrument of reverse
engineering, serving also to support farm machinery element designs.
Abstract: This paper proposes an improved approach based on
conventional particle swarm optimization (PSO) for solving an
economic dispatch(ED) problem with considering the generator
constraints. The mutation operators of the differential evolution (DE)
are used for improving diversity exploration of PSO, which called
particle swarm optimization with mutation operators (PSOM). The
mutation operators are activated if velocity values of PSO nearly to
zero or violated from the boundaries. Four scenarios of mutation
operators are implemented for PSOM. The simulation results of all
scenarios of the PSOM outperform over the PSO and other existing
approaches which appeared in literatures.
Abstract: Evaporator is an important and widely used heat
exchanger in air conditioning and refrigeration industries. Different
methods have been used by investigators to increase the heat transfer
rates in evaporators. One of the passive techniques to enhance heat
transfer coefficient is the application of microfin tubes. The
mechanism of heat transfer augmentation in microfin tubes is
dependent on the flow regime of two-phase flow. Therefore many
investigations of the flow patterns for in-tube evaporation have been
reported in literatures. The gravitational force, surface tension and
the vapor-liquid interfacial shear stress are known as three dominant
factors controlling the vapor and liquid distribution inside the tube. A
review of the existing literature reveals that the previous
investigations were concerned with the two-phase flow pattern for
flow boiling in horizontal tubes [12], [9]. Therefore, the objective of
the present investigation is to obtain information about the two-phase
flow patterns for evaporation of R-134a inside horizontal smooth and
microfin tubes. Also Investigation of heat transfer during flow
boiling of R-134a inside horizontal microfin and smooth tube have
been carried out experimentally The heat transfer coefficients for
annular flow in the smooth tube is shown to agree well with Gungor
and Winterton-s correlation [4]. All the flow patterns occurred in the
test can be divided into three dominant regimes, i.e., stratified-wavy
flow, wavy-annular flow and annular flow. Experimental data are
plotted in two kinds of flow maps, i.e., Weber number for the vapor
versus weber number for the liquid flow map and mass flux versus
vapor quality flow map. The transition from wavy-annular flow to
annular or stratified-wavy flow is identified in the flow maps.
Abstract: Currently, one of the main directions is developing of
development based on the clustering of economic operations of
Kazakhstan, providing for the organization and concentration of
production capacity in one region or the most optimal system. In the
modern economic literature clustering is regarded as one of the most
effective tools to ensure competitive businesses, and improve their
business itself.
Abstract: Quality costs are the costs associated with preventing,
finding, and correcting defective work. Since the main language of
corporate management is money, quality-related costs act as means of
communication between the staff of quality engineering departments
and the company managers. The objective of quality engineering is to
minimize the total quality cost across the life of product. Quality
costs provide a benchmark against which improvement can be
measured over time. It provides a rupee-based report on quality
improvement efforts. It is an effective tool to identify, prioritize and
select quality improvement projects. After reviewing through the
literature it was noticed that a simplified methodology for data
collection of quality cost in a manufacturing industry was required.
The quantified standard methodology is proposed for collecting data
of various elements of quality cost categories for manufacturing
industry. Also in the light of research carried out so far, it is felt
necessary to standardise cost elements in each of the prevention,
appraisal, internal failure and external failure costs. . Here an attempt
is made to standardise the various cost elements applicable to
manufacturing industry and data is collected by using the proposed
quantified methodology. This paper discusses the case study carried
in luggage manufacturing industry.
Abstract: Functional imaging procedures for the non-invasive assessment of tissue microcirculation are highly requested, but require a mathematical approach describing the trans- and intercapillary passage of tracer particles. Up to now, two theoretical, for the moment different concepts have been established for tracer kinetic modeling of contrast agent transport in tissues: pharmacokinetic compartment models, which are usually written as coupled differential equations, and the indicator dilution theory, which can be generalized in accordance with the theory of lineartime- invariant (LTI) systems by using a convolution approach. Based on mathematical considerations, it can be shown that also in the case of an open two-compartment model well-known from functional imaging, the concentration-time course in tissue is given by a convolution, which allows a separation of the arterial input function from a system function being the impulse response function, summarizing the available information on tissue microcirculation. Due to this reason, it is possible to integrate the open two-compartment model into the system-theoretic concept of indicator dilution theory (IDT) and thus results known from IDT remain valid for the compartment approach. According to the long number of applications of compartmental analysis, even for a more general context similar solutions of the so-called forward problem can already be found in the extensively available appropriate literature of the seventies and early eighties. Nevertheless, to this day, within the field of biomedical imaging – not from the mathematical point of view – there seems to be a trench between both approaches, which the author would like to get over by exemplary analysis of the well-known model.
Abstract: Software maintenance and mainly software
comprehension pose the largest costs in the software lifecycle. In
order to assess the cost of software comprehension, various
complexity measures have been proposed in the literature. This paper
proposes new cognitive-spatial complexity measures, which combine
the impact of spatial as well as architectural aspect of the software to
compute the software complexity. The spatial aspect of the software
complexity is taken into account using the lexical distances (in
number of lines of code) between different program elements and the
architectural aspect of the software complexity is taken into
consideration using the cognitive weights of control structures
present in control flow of the program. The proposed measures are
evaluated using standard axiomatic frameworks and then, the
proposed measures are compared with the corresponding existing
cognitive complexity measures as well as the spatial complexity
measures for object-oriented software. This study establishes that the
proposed measures are better indicators of the cognitive effort
required for software comprehension than the other existing
complexity measures for object-oriented software.
Abstract: Sleep stage scoring is the process of classifying the
stage of the sleep in which the subject is in. Sleep is classified into
two states based on the constellation of physiological parameters.
The two states are the non-rapid eye movement (NREM) and the
rapid eye movement (REM). The NREM sleep is also classified into
four stages (1-4). These states and the state wakefulness are
distinguished from each other based on the brain activity. In this
work, a classification method for automated sleep stage scoring
based on a single EEG recording using wavelet packet decomposition
was implemented. Thirty two ploysomnographic recording from the
MIT-BIH database were used for training and validation of the
proposed method. A single EEG recording was extracted and
smoothed using Savitzky-Golay filter. Wavelet packets
decomposition up to the fourth level based on 20th order Daubechies
filter was used to extract features from the EEG signal. A features
vector of 54 features was formed. It was reduced to a size of 25 using
the gain ratio method and fed into a classifier of regression trees. The
regression trees were trained using 67% of the records available. The
records for training were selected based on cross validation of the
records. The remaining of the records was used for testing the
classifier. The overall correct rate of the proposed method was found
to be around 75%, which is acceptable compared to the techniques in
the literature.
Abstract: An alternative iterative computational procedure is
proposed for internal normal ball loads calculation in statically
loaded single-row, angular-contact ball bearings, subjected to a
known thrust load, which is applied in the inner ring at the geometric
bearing center line. An accurate method for curvature radii at
contacts with inner and outer raceways in the direction of the motion
is used. Numerical aspects of the iterative procedure are discussed.
Numerical examples results for a 218 angular-contact ball bearing
have been compared with those from the literature. Twenty figures
are presented showing the geometrical features, the behavior of the
convergence variables and the following parameters as functions of
the thrust load: normal ball loads, contact angle, distance between
curvature centers, and normal ball and axial deflections.
Abstract: Robustness is one of the primary performance criteria for an Intelligent Video Surveillance (IVS) system. One of the key factors in enhancing the robustness of dynamic video analysis is,providing accurate and reliable means for shadow detection. If left undetected, shadow pixels may result in incorrect object tracking and classification, as it tends to distort localization and measurement information. Most of the algorithms proposed in literature are computationally expensive; some to the extent of equalling computational requirement of motion detection. In this paper, the homogeneity property of shadows is explored in a novel way for shadow detection. An adaptive division image (which highlights homogeneity property of shadows) analysis followed by a relatively simpler projection histogram analysis for penumbra suppression is the key novelty in our approach.
Abstract: Indigenous Knowledge (IK) has many social and
economic benefits. However, IK is at the risk of extinction due to the
difficulties to preserve it as most of the IK largely remains
undocumented. This study aims to design a model of the factors
affecting the adoption of Information and Communication
Technologies (ICTs) for the preservation of IK. The proposed model
is based on theoretical frameworks on ICT adoption. It was designed
following a literature review of ICT adoption theories for households,
and of the factors affecting ICT adoption for IK. The theory that
fitted to the best all factors was then chosen as the basis for the
proposed model. This study found that the Model of Adoption of
Technology in Households (MATH) is the most suitable theoretical
framework for modeling ICT adoption factors for the preservation of
IK.