Abstract: This study was conducted using the data collected at the mouth of Jen-Gen River to investigate and analyze chromium (Cr) contained in the sediments, and to evaluate the accumulation of Cr and the degree of its potential risk. The results show that samples collected at all monitoring stations near the mouth of Jen-Gen River contain 92–567 mg/kg of Cr with average of 366±166 mg/kg. The spatial distribution of Cr reveals that the Cr concentration is relatively high in the river mouth region, and gradually diminishes toward the harbor region. This indicates that upstream industrial and municipal wastewater discharges along the river bank are major sources of pollution. The accumulation factor and potential ecological risk index indicate that the sedimentation at Jen-Gen River mouth has the most serious degree of Cr accumulation and the highest ecological potential risk.
Abstract: Speeding represents one of the main concerns for road safety and it still is a subject for research. The need to address this problem and to understand why drivers over speed increases especially in Romania, where in 2011, speed was the main cause of car accidents. This article addresses this problem by using the theory of planned behaviour. A questionnaire was administered to a sample of young Romanian drivers (18 to 25 years) and several path analyses were made in order to verify if the model proposed by the theory of planned behaviour fits the data. One interesting result is that perceived behavioural control does not predict the intention to speed or self-reported driving speed, but subjective norms do. This implies that peers and social environment have a greater impact on young Romanian drivers than we thought.
Abstract: TTV is an unenveloped circular single-stranded DNA
virus with a diameter of 30-32 nm that first was described in 1997 in
Japan. TTV was detected in various populations without proven
pathology, including blood donors and in patients with chronic HBV
and HCV hepatitis. The aim of this study was to determine the
prevalence of TTV DNA in Iranian patients with chronic hepatitis B
and C. Viral TTV-DNA was studied in 442 samples (202 with HBV,
138 with HCV and 102 controls) collected from west south of Iran.
All extracted serum DNA was amplified by TTV ORF1 gene specific
primers using the semi nested PCR technique. TTV DNA was
detected in the serum of 8.9% and 10.8% patients with chronic
hepatitis B and C, respectively. Prevalence of TTV-DNA in the serum
of 102 controls was 2.9%. Results showed significant relation of TTV
with HBV and HCV in patients by using T test examination (P
Abstract: Fruit drying is a well known process mostly used for
preservation of fruits. Osmotic dehydration of apricot slices were
carried out in three different salt-sucrose concentrations and four
different temperatures. Also three different weight ratios of solution
to sample were conducted to one set of experiments. The dehydration
curves were constructed using Peleg-s model. Increasing the solution
volume increased the mass transfer rate and hence the solid gain
increased rapidly. Increasing the volume of osmotic media caused an
increase in overall mass transfer but a 'solution to sample' ratio of 5:1
gave the best product quality. The best temperature and concentration
that had a high water loss to solid gain ratio and an acceptable taste
were 40°C and 5%, respectively.
Abstract: According to dramatic growth of internet services, an easy and prompt service deployment has been important for internet service providers to successfully maintain time-to-market. Before global service deployment, they have to pay the big cost for service evaluation to make a decision of the proper system location, system scale, service delay and so on. But, intra-Lab evaluation tends to have big gaps in the measured data compared with the realistic situation, because it is very difficult to accurately expect the local service environment, network congestion, service delay, network bandwidth and other factors. Therefore, to resolve or ease the upper problems, we propose multiple cloud based GPES Broker system and use case that helps internet service providers to alleviate the above problems in beta release phase and to make a prompt decision for their service launching. By supporting more realistic and reliable evaluation information, the proposed GPES Broker system saves the service release cost and enables internet service provider to make a prompt decision about their service launching to various remote regions.
Abstract: Enterprise Architecture (EA) is a framework for description, coordination and alignment of all activities across the organization in order to achieve strategic goals using ICT enablers. A number of EA-compatible frameworks have been developed. We, in this paper, mainly focus on Federal Enterprise Architecture Framework (FEAF) since its reference models are plentiful. Among these models we are interested here in its business reference model (BRM). The test process is one important subject of an EA project which is to somewhat overlooked. This lack of attention may cause drawbacks or even failure of an enterprise architecture project. To address this issue we intend to use International Software Testing Qualification Board (ISTQB) framework and standard test suites to present a method to improve EA testing process. The main challenge is how to communicate between the concepts of EA and ISTQB. In this paper, we propose a method for integrating these concepts.
Abstract: In This paper, the behavior of eccentric braced frame
(EBF) is studied with replacing friction damper (FD) in confluence of these braces, in 5 and 10-storey steel frames. For FD system, the main step is to determine the slip load. For this reason, the performance indexes include roof displacement, base shear, dissipated energy and relative performance should be investigated. In
nonlinear dynamic analysis, the response of structure to three
earthquake records has been obtained and the values of roof
displacement, base shear and column axial force for FD and EBF
frames have been compared. The results demonstrate that use of the FD in frames, in comparison with the EBF, substantially reduces the roof displacement, column axial force and base shear. The obtained results show suitable performance of FD in higher storey structure in
comparison with the EBF.
Abstract: The Merrifield-Simmons index of a graph G is defined as the total number of its independent sets. A (n, n + 2)-graph is a connected simple graph with n vertices and n + 2 edges. In this paper we characterize the (n, n+2)-graph with the largest Merrifield- Simmons index. We show that its Merrifield-Simmons index i.e. the upper bound of the Merrifield-Simmons index of the (n, n+2)-graphs is 9 × 2n-5 +1 for n ≥ 5.
Abstract: Information and Communications Technologies (ICT) has been integrated in education in many developing and developed countries alike, but the use of ICT in Tanzanian schools is dismal. Many Tanzanian secondary schools have no computers. The few schools with computers use them primarily for secretarial services and computer literacy training. The Tanzanian education system at other levels like secondary school level has to undergo substantial transformation, underscored by the growing application of new information and communication technology. This paper presents the e-readiness survey result from secondary schools in Tanzania. The paper also suggests how Tanzania can make use of the few present ICT resources to support and improve teaching and learning functions to improve performance and acquisition of knowledge by using e-Learning Management System (e-LMS).
Abstract: This main purpose of the study reported here was to
investigate the extent to which the form of school
governance (particularly decision-making) had an impact upon the
effectiveness of the school with reference to parental involvement,
planning and budgeting, professional development of teachers,
school facilities and resources, and student outcomes. Particular
attention was given to decision-making within the governance
arrangements. The study was based on four case studies of high
schools in New South Wales, Australia including one government
school, one independent Christian community school, one
independent Catholic school, and one Catholic systemic school.
The focus of the research was principals, teachers, parents, and
students of four schools with varying governance structures. To
gain a greater insight into the issues, the researchers collected
information by questionnaire, semi-structured interview, and
review of school key documents. This study found that it was not
so much structure but the centrality of the school Principal and the
way that the Principal perceived his/her roles in relation to others
that impacted most on school governance.
Abstract: In recent decade's tourism industry is one of main
reasons of the social and economical development for many
countries; so these countries try to gain more portion of it for
themselves. The excessive natural and cultural touristy potentialities
in Iran made this country to be one of the most attractive sightseeing
areas, although; Iran has got the lowest rate of tourists. Khark Island
is about 32 km. It is a beautiful coral reef coast; about 98% of oil
export has been done through this place. The ecotourism
potentialities of Khark and Kharko Islands (about 3.7km far from
Khark) are the reason to consider ecotourism and the main activity in
these islands which is exporting oil at the same time. This article
refers to way of measuring the geographical coordination of the
place, and the potentialities, ecotourism attraction of the islands and
introduces some ideas in order to expand tourism in the islands.
Abstract: The use of synthetic retardants in polymeric insulated
cables is not uncommon in the high voltage engineering to study
electrical treeing phenomenon. However few studies on organic
materials for the same investigation have been carried. .This paper
describes the study on the effects of Oil Palm Empty Fruit Bunch
(OPEFB) microfiller on the tree initiation and propagation in silicone
rubber with different weight percentages (wt %) of filler to insulation
bulk material. The weight percentages used were 0 wt % and 1 wt %
respectively. It was found that the OPEFB retards the propagation of
the electrical treeing development. For tree inception study, the
addition of 1(wt %) OPEFB has increase the tree inception voltage of
silicone rubber. So, OPEFB is a potential retardant to the initiation
and growth of electrical treeing occurring in polymeric materials for
high voltage application. However more studies on the effects of
physical and electrical properties of OPEFB as a tree retardant
material are required.
Abstract: The ability of pomelo peel, a natural biosorbent, to remove Cd(II) ions from aqueous solution by biosorption was investigated. The experiments were carried out by batch method at 25 °C. The influence of solution pH, initial cadmium ion concentrations and contact times were evaluated. Cadmium ion removal increased significantly as the pH of the solution increased from pH 1 to pH 5. At pH 5, the cadmium ion removal reached a maximum value. The equilibrium process was described well by the Langmuir isotherm model, with a maximum biosorption capacity of 21.83 mg/g. The biosorption was relatively quick, (approx. 20 min). Biosorption kinetics followed a pseudo-second-order model. The result showed that pomelo peel was effective as a biosorbent for removing cadmium ions from aqueous solution. It is a low cost material that shows potential to be applied in wastewater technology for remediation of heavy metal contamination.
Abstract: In contrast to existing methods which do not take into account multiconnectivity in a broad sense of this term, we develop mathematical models and highly effective combination (BIEM and FDM) numerical methods of calculation of stationary and quasistationary temperature field of a profile part of a blade with convective cooling (from the point of view of realization on PC). The theoretical substantiation of these methods is proved by appropriate theorems. For it, converging quadrature processes have been developed and the estimations of errors in the terms of A.Ziqmound continuity modules have been received. For visualization of profiles are used: the method of the least squares with automatic conjecture, device spline, smooth replenishment and neural nets. Boundary conditions of heat exchange are determined from the solution of the corresponding integral equations and empirical relationships. The reliability of designed methods is proved by calculation and experimental investigations heat and hydraulic characteristics of the gas turbine first stage nozzle blade.
Abstract: The issue of classifying objects into one of predefined
groups when the measured variables are mixed with different types
of variables has been part of interest among statisticians in many
years. Some methods for dealing with such situation have been
introduced that include parametric, semi-parametric and nonparametric
approaches. This paper attempts to discuss on a problem
in classifying a data when the number of measured mixed variables is
larger than the size of the sample. A propose idea that integrates a
dimensionality reduction technique via principal component analysis
and a discriminant function based on the location model is discussed.
The study aims in offering practitioners another potential tool in a
classification problem that is possible to be considered when the
observed variables are mixed and too large.
Abstract: The tensile properties of Mg-3%Al nanocrystalline
alloys were investigated at different test environment. Bulk
nanocrystalline samples of these alloy was successfully prepared by
mechanical alloying (MA) followed by cold compaction, sintering,
and hot extrusion process. The crystal size of the consolidated milled
sample was calculated by X-Ray line profile analysis. The
deformation mechanism and microstructural characteristic at
different test condition was discussed extensively. At room
temperature, relatively lower value of activation volume (AV) and
higher value of strain rate sensitivity (SRS) suggests that new rate
controlling mechanism accommodating plastic flow in the present
nanocrystalline sample. The deformation behavior and the
microstructural character of the present samples were discussed in
details.
Abstract: Work ethic and labour productivity issues are
extremely important for any society. It has been long proven by the
global practice and various scholars that the country promoting the
labour has always been way forward from the other countries. This
paper studies the thoughts suggested by M.Weber, Confucius, Lee
Kuan Yew, Mahathir Mohammad and other prominent thinkers
concerning the issues of work ethics and labour productivity. The
article analyzes why developed nations are way more advanced in
their development compared to other nations.
Abstract: Production of hard-to-cut materials with uncoated carbide cutting tools in turning, not only cause tool life reduction but also, impairs the product surface roughness. In this paper, influence of hot machining method were studied and presented in two cases. Case1-Workpiece surface roughness quality with constant cutting parameter and 300 ºC initial workpiece surface temperature. Case 2- Tool temperature variation when cutting with two speeds 78.5 (m/min) and 51 (m/min). The workpiece material and tool used in this study were AISI 1060 steel (45HRC) and uncoated carbide TNNM 120408-SP10(SANDVIK Coromant) respectively. A gas flam heating source was used to preheating of the workpiece surface up to 300 ºC, causing reduction of yield stress about 15%. Results obtained experimentally, show that the method used can considerably improved surface quality of the workpiece.
Abstract: The objectives of this research were to explore factors
influencing knowledge management process in the manufacturing
industry and develop a model to support knowledge management
processes. The studied factors were technology infrastructure, human
resource, knowledge sharing, and the culture of the organization. The
knowledge management processes included discovery, capture,
sharing, and application. Data were collected through questionnaires
and analyzed using multiple linear regression and multiple
correlation. The results found that technology infrastructure, human
resource, knowledge sharing, and culture of the organization
influenced the discovery and capture processes. However, knowledge
sharing had no influence in sharing and application processes. A
model to support knowledge management processes was developed,
which indicated that sharing knowledge needed further improvement
in the organization.
Abstract: The paper presents a numerical investigation on the
rapid gas decompression in pure nitrogen which is made by using the
one-dimensional (1D) and three-dimensional (3D) mathematical
models of transient compressible non-isothermal fluid flow in pipes.
A 1D transient mathematical model of compressible thermal multicomponent
fluid mixture flow in pipes is presented. The set of the
mass, momentum and enthalpy conservation equations for gas phase
is solved in the model. Thermo-physical properties of multicomponent
gas mixture are calculated by solving the Equation of
State (EOS) model. The Soave-Redlich-Kwong (SRK-EOS) model is
chosen. This model is successfully validated on the experimental data
[1] and shows a good agreement with measurements. A 3D transient
mathematical model of compressible thermal single-component gas
flow in pipes, which is built by using the CFD Fluent code (ANSYS),
is presented in the paper. The set of unsteady Reynolds-averaged
conservation equations for gas phase is solved. Thermo-physical
properties of single-component gas are calculated by solving the Real
Gas Equation of State (EOS) model. The simplest case of gas
decompression in pure nitrogen is simulated using both 1D and 3D
models. The ability of both models to simulate the process of rapid
decompression with a high order of agreement with each other is
tested. Both, 1D and 3D numerical results show a good agreement
between each other. The numerical investigation shows that 3D CFD
model is very helpful in order to validate 1D simulation results if the
experimental data is absent or limited.