Abstract: Variable speed drives are growing and varying. Drives expanse depend on progress in different part of science like power system, microelectronic, control methods, and so on. Artificial intelligent contains hard computation and soft computation. Artificial intelligent has found high application in most nonlinear systems same as motors drive. Because it has intelligence like human but there are no sentimental against human like angriness and.... Artificial intelligent is used for various points like approximation, control, and monitoring. Because artificial intelligent techniques can use as controller for any system without requirement to system mathematical model, it has been used in electrical drive control. With this manner, efficiency and reliability of drives increase and volume, weight and cost of them decrease.
Abstract: These This paper looks into frameworks which aim at
furthering the discussion of the role of regenerative design practices
in a city-s historic core and the tool of urban design to achieve urban
revitalization on the island of Cyprus. It also examines the region-s
demographic mix, the effectiveness of its governmental coordination
and the strategies of adaptive reuse and strategic investments in older
areas with existing infrastructure. The two main prongs of
investigation will consider the effect of the existing and proposed
changes in the physical infrastructure and fabric of the city, as well as
the catalytic effect of sustainable urban design practices. Through this
process, the work hopes to integrate the contained potential within
the existing historic core and the contributions and participation of
the migrant and immigrant populations to the local economy. It also
examines ways in which this coupling of factors can bring to the front
the positive effects of this combined effort on an otherwise sluggish
local redevelopment effort. The data for this study is being collected
and organized as part of ongoing urban design and development
student workshop efforts in urban planning and design education.
The work is presented in graphic form and includes data collected
from interviews with study area organizations and the community at
large. Planning work is also based on best practices initiated by the
staff of the Nicosia Master Plan task force, which coordinates holistic
planning efforts for the historic center of the city of Nicosia.
Abstract: The paper is concerned with developing stochastic delay mechanisms for efficient multicast protocols and for smooth mobile handover processes which are capable of preserving a given Quality of Service (QoS). In both applications the participating entities (receiver nodes or subscribers) sample a stochastic timer and generate load after a random delay. In this way, the load on the networking resources is evenly distributed which helps to maintain QoS communication. The optimal timer distributions have been sought in different p.d.f. families (e.g. exponential, power law and radial basis function) and the optimal parameter have been found in a recursive manner. Detailed simulations have demonstrated the improvement in performance both in the case of multicast and mobile handover applications.
Abstract: This paper discusses applications of a revolutionary
information technology, Geographic Information Systems (GIS), in
the field of the history of cartography by examples, including
assessing accuracy of early maps, establishing a database of places
and historical administrative units in history, integrating early maps
in GIS or digital images, and analyzing social, political, and
economic information related to production of early maps. GIS
provides a new mean to evaluate the accuracy of early maps. Four
basic steps using GIS for this type of study are discussed. In addition,
several historical geographical information systems are introduced.
These include China Historical Geographic Information Systems
(CHGIS), the United States National Historical Geographic
Information System (NHGIS), and the Great Britain Historical
Geographical Information System. GIS also provides digital means to
display and analyze the spatial information on the early maps or to
layer them with modern spatial data. How GIS relational data
structure may be used to analyze social, political, and economic
information related to production of early maps is also discussed in
this paper. Through discussion on these examples, this paper reveals
value of GIS applications in this field.
Abstract: The objective of this paper is to propose an adaptive multi threshold for image segmentation precisely in object detection. Due to the different types of license plates being used, the requirement of an automatic LPR is rather different for each country. The proposed technique is applied on Malaysian LPR application. It is based on Multi Layer Perceptron trained by back propagation. The proposed adaptive threshold is introduced to find the optimum threshold values. The technique relies on the peak value from the graph of the number object versus specific range of threshold values. The proposed approach has improved the overall performance compared to current optimal threshold techniques. Further improvement on this method is in progress to accommodate real time system specification.
Abstract: In this paper, we have combined some spatial derivatives with the optimised time derivative proposed by Tam and Webb in order to approximate the linear advection equation which is given by = 0. Ôêé Ôêé + Ôêé Ôêé x f t u These spatial derivatives are as follows: a standard 7-point 6 th -order central difference scheme (ST7), a standard 9-point 8 th -order central difference scheme (ST9) and optimised schemes designed by Tam and Webb, Lockard et al., Zingg et al., Zhuang and Chen, Bogey and Bailly. Thus, these seven different spatial derivatives have been coupled with the optimised time derivative to obtain seven different finite-difference schemes to approximate the linear advection equation. We have analysed the variation of the modified wavenumber and group velocity, both with respect to the exact wavenumber for each spatial derivative. The problems considered are the 1-D propagation of a Boxcar function, propagation of an initial disturbance consisting of a sine and Gaussian function and the propagation of a Gaussian profile. It is known that the choice of the cfl number affects the quality of results in terms of dissipation and dispersion characteristics. Based on the numerical experiments solved and numerical methods used to approximate the linear advection equation, it is observed in this work, that the quality of results is dependent on the choice of the cfl number, even for optimised numerical methods. The errors from the numerical results have been quantified into dispersion and dissipation using a technique devised by Takacs. Also, the quantity, Exponential Error for Low Dispersion and Low Dissipation, eeldld has been computed from the numerical results. Moreover, based on this work, it has been found that when the quantity, eeldld can be used as a measure of the total error. In particular, the total error is a minimum when the eeldld is a minimum.
Abstract: The present study is concerned with the effect of
exciting boundary layer on cooling process in a gas-turbine blades.
The cooling process is numerically investigated. Observations show
cooling the first row of moving or stable blades leads to increase
their life-time. Results show that minimum temperature in cooling
line with exciting boundary layer is lower than without exciting.
Using block in cooling line of turbines' blade causes flow pattern and
stability in boundary layer changed that causes increase in heat
transfer coefficient. Results show at the location of block,
temperature of turbines' blade is significantly decreased. The k-ε
turbulence model is used.
Abstract: The urbanization phenomenon in Yogyakarta Special
Province, Indonesia, encouraged people move to the city for getting
jobs in the informal sectors. They live in some temporary houses in
the three main riverbanks: Gadjahwong, Code, and Winongo.
Triggered by its independent status they use it as the space for
accommodating domestic, social and economy activities because of
the non standardized room size of their houses, where are recognized
as the environmental hazards. This recognition makes the ambivalent
perception when was related to the twelfth point of the philosophy of
community development concept: the empowering individuals and
communities. Its spatial implication have actually described the
territory and the place making phenomena. By analyzing some data
collected the author-s fundamental research funded by The General
Directorate of Higher Education of Indonesia, this paper will discuss
how do the spatial implications of the occupants- behavior and the
numerous perceptions of those phenomena.
Abstract: The purpose of this research is to determine the
knowledge and skills possessed by instructional design (ID)
practitioners in Malaysia. As ID is a relatively new field in the
country and there seems to be an absence of any studies on its
community of practice, the main objective of this research is to
discover the tasks and activities performed by ID practitioners in
educational and corporate organizations as suggested by the
International Board of Standards for Training, Performance and
Instruction. This includes finding out the ID models applied in the
course of their work. This research also attempts to identify the
barriers and issues as to why some ID tasks and activities are rarely
or never conducted. The methodology employed in this descriptive
study was a survey questionnaire sent to 30 instructional designers
nationwide. The results showed that majority of the tasks and
activities are carried out frequently enough but omissions do occur
due to reasons such as it being out of job scope, the decision was
already made at a higher level, and the lack of knowledge and skills.
Further investigations of a qualitative manner should be conducted
to achieve a more in-depth understanding of ID practices in
Malaysia
Abstract: Stainless steel has been employed in many
engineering applications ranging from pharmaceutical equipment to
piping in the nuclear reactors and storage to chemical products. In
this attempt, simulation of fatigue crack growth based on
experimental results of austenitic stainless steel 304L was presented
using AFGROW code when NASGRO mode laws adopted. Double
through crack at hole specimen is used in this investigation under
constant amplitude loading. Effect of mean stress is highlighted.
Results show that fatigue crack growth rate (FCGR) and fatigue life
were affected by maximum applied load and dimension of hole. An
equivalent of Paris law for this material was estimated.
Abstract: This paper presents a low cost design of heart beat monitoring device using reflectance mode PhotoPlethysmography (PPG). PPG is known for its simple construction, ease of use and cost effectiveness and can provide information about the changes in cardiac activity as well as aid in earlier non-invasive diagnostics. The proposed device is divided into three phases. First is the detection of pulses through the fingertip. The signal is then passed to the signal processing unit for the purpose of amplification, filtering and digitizing. Finally the heart rate is calculated and displayed on the computer using parallel port interface. The paper is concluded with prototyping of the device followed by verification procedure of the heartbeat signal obtained in laboratory setting.
Abstract: D-erythro-cyclohexylserine (D
chiral unnatural β-hydroxy amino acid expected for the synthesis of drug for AIDS treatment. To develop a continuous bioconversion
system with whole cell biocatalyst of D-threonine aldolase (D genes for the D-erythro-CHS production, D-threonine aldolase gene
was amplified from Ensifer arboris 100383 by direct PCR amplication using two degenerated oligonucleotide primers designed based on
genomic sequence of Shinorhizobium meliloti
Sequence analysis of the cloned DNA fragment revealed one
open-reading frame of 1059 bp and 386 amino acids. This putative
D-TA gene was cloned into NdeI and EcoRI (pEnsi
His-tag sequence or BamHI (pEnsi-DTA[2])
sequence of the pET21(a) vector. The expression level of the cloned gene was extremely overexpressed by E. coli BL21(DE3) transformed with pEnsi-DTA[1] compared to E. coli BL21(DE3) transformed with
pEnsi-DTA[2]. When the cells expressing the wild
used for D-TA enzyme activity, 12 mM glycine was successfully
detected in HPLC analysis. Moreover, the whole cells harbouring the
recombinant D-TA was able to synthesize D-erythro
of 0.6 mg/ml in a batch reaction.
Abstract: Access control is a critical security service in Wire- less
Sensor Networks (WSNs). To prevent malicious nodes from joining
the sensor network, access control is required. On one hand, WSN
must be able to authorize and grant users the right to access to the
network. On the other hand, WSN must organize data collected by
sensors in such a way that an unauthorized entity (the adversary)
cannot make arbitrary queries. This restricts the network access only
to eligible users and sensor nodes, while queries from outsiders will
not be answered or forwarded by nodes. In this paper we presentee
different access control schemes so as to ?nd out their objectives,
provision, communication complexity, limits, etc. Using the node
density parameter, we also provide a comparison of these proposed
access control algorithms based on the network topology which can
be flat or hierarchical.
Abstract: The scope of this research was to study the relation between the facial expressions of three lecturers in a real academic lecture theatre and the reactions of the students to those expressions. The first experiment aimed to investigate the effectiveness of a virtual lecturer-s expressions on the students- learning outcome in a virtual pedagogical environment. The second experiment studied the effectiveness of a single facial expression, i.e. the smile, on the students- performance. Both experiments involved virtual lectures, with virtual lecturers teaching real students. The results suggest that the students performed better by 86%, in the lectures where the lecturer performed facial expressions compared to the results of the lectures that did not use facial expressions. However, when simple or basic information was used, the facial expressions of the virtual lecturer had no substantial effect on the students- learning outcome. Finally, the appropriate use of smiles increased the interest of the students and consequently their performance.
Abstract: European Union candidate status provides a
strong motivation for decision-making in the candidate
countries in shaping the regional development policy where
there is an envisioned transfer of power from center to the
periphery. The process of Europeanization anticipates the
candidate countries configure their regional institutional
templates in the context of the requirements of the European
Union policies and introduces new instruments of incentive
framework of enlargement to be employed in regional
development schemes. It is observed that the contribution of
the local actors to the decision making in the design of the
allocation architectures enhances the efficiency of the funds
and increases the positive effects of the projects funded under
the regional development objectives. This study aims at
exploring the performances of the three regional development
grant schemes in Turkey, established and allocated under the
pre-accession process with a special emphasis given to the
roles of the national and local actors in decision-making for
regional development. Efficiency analyses have been
conducted using the DEA methodology which has proved to
be a superior method in comparative efficiency and
benchmarking measurements. The findings of this study as
parallel to similar international studies, provides that the
participation of the local actors to the decision-making in
funding contributes both to the quality and the efficiency of
the projects funded under the EU schemes.
Abstract: This paper describes a new supervised fusion (hybrid)
electrocardiogram (ECG) classification solution consisting of a new
QRS complex geometrical feature extraction as well as a new version
of the learning vector quantization (LVQ) classification algorithm
aimed for overcoming the stability-plasticity dilemma. Toward this
objective, after detection and delineation of the major events of ECG
signal via an appropriate algorithm, each QRS region and also its
corresponding discrete wavelet transform (DWT) are supposed as
virtual images and each of them is divided into eight polar sectors.
Then, the curve length of each excerpted segment is calculated
and is used as the element of the feature space. To increase the
robustness of the proposed classification algorithm versus noise,
artifacts and arrhythmic outliers, a fusion structure consisting of
five different classifiers namely as Support Vector Machine (SVM),
Modified Learning Vector Quantization (MLVQ) and three Multi
Layer Perceptron-Back Propagation (MLP–BP) neural networks with
different topologies were designed and implemented. The new proposed
algorithm was applied to all 48 MIT–BIH Arrhythmia Database
records (within–record analysis) and the discrimination power of the
classifier in isolation of different beat types of each record was
assessed and as the result, the average accuracy value Acc=98.51%
was obtained. Also, the proposed method was applied to 6 number
of arrhythmias (Normal, LBBB, RBBB, PVC, APB, PB) belonging
to 20 different records of the aforementioned database (between–
record analysis) and the average value of Acc=95.6% was achieved.
To evaluate performance quality of the new proposed hybrid learning
machine, the obtained results were compared with similar peer–
reviewed studies in this area.
Abstract: Industrial radiography is a famous technique for the identification and evaluation of discontinuities, or defects, such as cracks, porosity and foreign inclusions found in welded joints. Although this technique has been well developed, improving both the inspection process and operating time, it does suffer from several drawbacks. The poor quality of radiographic images is due to the physical nature of radiography as well as small size of the defects and their poor orientation relatively to the size and thickness of the evaluated parts. Digital image processing techniques allow the interpretation of the image to be automated, avoiding the presence of human operators making the inspection system more reliable, reproducible and faster. This paper describes our attempt to develop and implement digital image processing algorithms for the purpose of automatic defect detection in radiographic images. Because of the complex nature of the considered images, and in order that the detected defect region represents the most accurately possible the real defect, the choice of global and local preprocessing and segmentation methods must be appropriated.
Abstract: Information is power. Geographical information is an
emerging science that is advancing the development of knowledge to
further help in the understanding of the relationship of “place" with
other disciplines such as crime. The researchers used crime data for
the years 2004 to 2007 from the Baguio City Police Office to
determine the incidence and actual locations of crime hotspots.
Combined qualitative and quantitative research methodology was
employed through extensive fieldwork and observation, geographic
visualization with Geographic Information Systems (GIS) and Global
Positioning Systems (GPS), and data mining. The paper discusses
emerging geographic visualization and data mining tools and
methodologies that can be used to generate baseline data for
environmental initiatives such as urban renewal and rejuvenation.
The study was able to demonstrate that crime hotspots can be
computed and were seen to be occurring to some select places in the
Central Business District (CBD) of Baguio City. It was observed that
some characteristics of the hotspot places- physical design and milieu
may play an important role in creating opportunities for crime. A list
of these environmental attributes was generated. This derived
information may be used to guide the design or redesign of the urban
environment of the City to be able to reduce crime and at the same
time improve it physically.
Abstract: As networking has become popular, Web-learning
tends to be a trend while designing a tool. Moreover, five-axis
machining has been widely used in industry recently; however, it has
potential axial table colliding problems. Thus this paper aims at
proposing an efficient web-learning collision detection tool on
five-axis machining. However, collision detection consumes heavy
resource that few devices can support, thus this research uses a
systematic approach based on web knowledge to detect collision. The
methodologies include the kinematics analyses for five-axis motions,
separating axis method for collision detection, and computer
simulation for verification. The machine structure is modeled as STL
format in CAD software. The input to the detection system is the
g-code part program, which describes the tool motions to produce the
part surface. This research produced a simulation program with C
programming language and demonstrated a five-axis machining
example with collision detection on web site. The system simulates the
five-axis CNC motion for tool trajectory and detects for any collisions
according to the input g-codes and also supports high-performance
web service benefiting from C. The result shows that our method
improves 4.5 time of computational efficiency, comparing to the
conventional detection method.
Abstract: Atrial Fibrillation is the most common sustained
arrhythmia encountered by clinicians. Because of the invisible
waveform of atrial fibrillation in atrial activation for human, it is
necessary to develop an automatic diagnosis system. 12-Lead ECG
now is available in hospital and is appropriate for using Independent
Component Analysis to estimate the AA period. In this research, we
also adopt a second-order blind identification approach to transform
the sources extracted by ICA to more precise signal and then we use
frequency domain algorithm to do the classification. In experiment,
we gather a significant result of clinical data.