Abstract: The objective of this research is to study the technical
and economic performance of wind/diesel/battery (W/D/B) system
supplying a remote small gathering of six families using HOMER
software package. The electrical energy is to cater for the basic needs
for which the daily load pattern is estimated. Net Present Cost (NPC)
and Cost of Energy (COE) are used as economic criteria, while the measure of performance is % of power shortage. Technical and
economic parameters are defined to estimate the feasibility of the
system under study. Optimum system configurations are estimated for two sites. Using HOMER software, the simulation results showed that W/D/B systems are economical for the assumed community sites
as the price of generated electricity is about 0.308 $/kWh, without
taking external benefits into considerations. W/D/B systems are more
economical than W/B or diesel alone systems, as the COE is 0.86 $/kWh for W/B and 0.357 $/kWh for diesel alone.
Abstract: An Automated Rapid Maxillary Expander (ARME) is
a specially designed microcontroller-based orthodontic appliance to
overcome the shortcomings imposed by the traditional maxillary
expansion appliances. This new device is operates by automatically
widening the maxilla (upper jaw) by expanding the midpalatal suture
[1]. The ARME appliance that has been developed is a combination
of modified butterfly expander appliance, micro gear, micro motor,
and microcontroller to automatically produce light and continuous
pressure to expand the maxilla. For this study, the functionality of the
system is verified through laboratory tests by measure the forced
applied to the teeth each time the maxilla expands. The laboratory
test results show that the developed appliance meets the desired
performance specifications consistently.
Abstract: A novel nanofinishing process using improved ball
end magnetorheological (MR) finishing tool was developed for finishing of flat as well as 3D surfaces of ferromagnetic and non ferromagnetic workpieces. In this process a magnetically controlled
ball end of smart MR polishing fluid is generated at the tip surface of
the tool which is used as a finishing medium and it is guided to
follow the surface to be finished through computer controlled 3-axes
motion controller. The experiments were performed on ferromagnetic
workpiece surface in the developed MR finishing setup to study the effect of finishing time on final surface roughness. The performance
of present finishing process on final finished surface roughness was studied. The surface morphology was observed under scanning
electron microscopy and atomic force microscope. The final surface finish was obtained as low as 19.7 nm from the initial surface
roughness of 142.9 nm. The outcome of newly developed finishing process can be found useful in its applications in aerospace,
automotive, dies and molds manufacturing industries, semiconductor and optics machining etc.
Abstract: In this paper, we explore the applicability of the Sinc-
Collocation method to a three-dimensional (3D) oceanography model.
The model describes a wind-driven current with depth-dependent
eddy viscosity in the complex-velocity system. In general, the
Sinc-based methods excel over other traditional numerical methods
due to their exponentially decaying errors, rapid convergence and
handling problems in the presence of singularities in end-points.
Together with these advantages, the Sinc-Collocation approach that
we utilize exploits first derivative interpolation, whose integration
is much less sensitive to numerical errors. We bring up several
model problems to prove the accuracy, stability, and computational
efficiency of the method. The approximate solutions determined by
the Sinc-Collocation technique are compared to exact solutions and
those obtained by the Sinc-Galerkin approach in earlier studies. Our
findings indicate that the Sinc-Collocation method outperforms other
Sinc-based methods in past studies.
Abstract: The identification and classification of the spine deformity play an important role when considering surgical planning for adolescent patients with idiopathic scoliosis. The subject of this article is the Lenke classification of scoliotic spines using Cobb angle measurements. The purpose is two-fold: (1) design a rulebased diagram to assist clinicians in the classification process and (2) investigate a computer classifier which improves the classification time and accuracy. The rule-based diagram efficiency was evaluated in a series of scoliotic classifications by 10 clinicians. The computer classifier was tested on a radiographic measurement database of 603 patients. Classification accuracy was 93% using the rule-based diagram and 99% for the computer classifier. Both the computer classifier and the rule based diagram can efficiently assist clinicians in their Lenke classification of spine scoliosis.
Abstract: Green house effect has becomes a serious concern in
many countries due to the increase consumption of the fossil fuel.
There have been many studies to find an alternative power source.
Wind energy found to be one of the most useful solutions to help in
overcoming the air pollution and global. There is no agreed solution
to conversion of wind energy to electrical energy. In this paper, the
advantages of using a Switched Reluctance Generator (SRG) for
wind energy applications. The theoretical study of the self excitation
of a SRG and the determination of the variable parameters in a SRG
design are discussed. The design parameters for the maximum power
output of the SRG are computed using Matlab simulation. The
designs of the circuit to control the variable parameters in a SRG to
provide the maximum power output are also discussed.
Abstract: The γ-turns play important roles in protein folding and
molecular recognition. The prediction and analysis of γ-turn types are
important for both protein structure predictions and better
understanding the characteristics of different γ-turn types. This study
proposed a physicochemical property-based decision tree (PPDT)
method to interpretably predict γ-turn types. In addition to the good
prediction performance of PPDT, three simple and human
interpretable IF-THEN rules are extracted from the decision tree
constructed by PPDT. The identified informative physicochemical
properties and concise rules provide a simple way for discriminating
and understanding γ-turn types.
Abstract: Fake finger submission attack is a major problem in fingerprint recognition systems. In this paper, we introduce an aliveness detection method based on multiple static features, which derived from a single fingerprint image. The static features are comprised of individual pore spacing, residual noise and several first order statistics. Specifically, correlation filter is adopted to address individual pore spacing. The multiple static features are useful to reflect the physiological and statistical characteristics of live and fake fingerprint. The classification can be made by calculating the liveness scores from each feature and fusing the scores through a classifier. In our dataset, we compare nine classifiers and the best classification rate at 85% is attained by using a Reduced Multivariate Polynomial classifier. Our approach is faster and more convenient for aliveness check for field applications.
Abstract: This paper aims at developing a multilevel fuzzy
decision support model for urban rail transit planning schemes in
China under the background that China is presently experiencing an
unprecedented construction of urban rail transit. In this study, an
appropriate model using multilevel fuzzy comprehensive evaluation
method is developed. In the decision process, the followings are
considered as the influential objectives: traveler attraction,
environment protection, project feasibility and operation. In addition,
consistent matrix analysis method is used to determine the weights
between objectives and the weights between the objectives-
sub-indictors, which reduces the work caused by repeated
establishment of the decision matrix on the basis of ensuring the
consistency of decision matrix. The application results show that
multilevel fuzzy decision model can perfectly deal with the
multivariable and multilevel decision process, which is particularly
useful in the resolution of multilevel decision-making problem of
urban rail transit planning schemes.
Abstract: According to FDA (Food and Drug Administration of the United States), vinegar is definedas a sour liquid containing at least 4 grams acetic acid in 100 cubic centimeter (4% solution of acetic acid) of solution that is produced from sugary materials by alcoholic fermentation. In the base of microbial starters, vinegars could be contained of more than 50 types of volatile and aromatic substances that responsible for their sweet taste and smelling. Recently the vinegar industry has a great proportion in agriculture, food and microbial biotechnology. The acetic acid bacteria are from the family Acetobacteraceae. Regarding to the latest version of Bergy-s Mannual of Systematic Bacteriology that has categorized bacteria in the base of their 16s RNA differences, the most important acetic acid genera are included Acetobacter (genus I), Gluconacetobacter (genus VIII) and Gluconobacter (genus IX). The genus Acetobacter that is primarily used in vinegar manufacturing plants is a gram negative, obligate aerobe coccus or rod shaped bacterium with the size 0.6 - 0.8 X 1.0 - 4.0 μm, nonmotile or motile with peritrichous flagella and catalase positive – oxidase negative biochemically. Some strains are overoxidizer that could convert acetic acid to carbon dioxide and water.In this research one Acetobacter native strain with high acetic acid productivity was isolated from Iranian white – red cherry. We used two specific culture media include Carr medium [yeast extract, 3%; ethanol, 2% (v/v); bromocresol green, 0.002%; agar, 2% and distilled water, 1000 ml], Frateur medium [yeast extract, 10 g/l; CaCO3, 20 g/l; ethanol, 20 g/l; agar, 20 g/l and distilled water, 1000 ml] and an industrial culture medium. In addition to high acetic acid production and high growth rate, this strain had a good tolerance against ethanol concentration that was examined using modified Carr media with 5%, 7% and 9% ethanol concentrations. While the industrial strains of acetic acid bacteria grow in the thermal range of 28 – 30 °C, this strain was adapted for growth in 34 – 36 °C after 96 hours incubation period. These dramatic characteristics suggest a potential biotechnological strain in production of cherry vinegar with a sweet smell and different nutritional properties in comparison to recent vinegar types. The lack of growth after 24, 48 and 72 hours incubation at 34 – 36 °C and the growth after 96 hours indicates a good and fast thermal flexibility of this strain as a significant characteristic of biotechnological and industrial strains.
Abstract: Chest pain is one of the most prevalent complaints
among adults that cause the people to attend to medical centers. The
aim was to determine the prevalence and risk factors of chest pain
among over 30 years old people in Tehran. In this cross-sectional
study, 787 adults took part from Apr 2005 until Apr 2006. The
sampling method was random cluster sampling and there were 25
clusters. In each cluster, interviews were performed with 32 over 30
years old, people lived in those houses. In cases with chest pain, extra
questions asked. The prevalence of CP was 9% (71 cases). Of them
21 cases (6.5%) were in 41-60 year age ranges and the remainders
were over 61 year old. 19 cases (26.8%) mentioned CP in resting
state and all of the cases had exertion onset CP. The CP duration was
10 minutes or less in all of the cases and in most of them (84.5%), the
location of pain mentioned left anterior part of chest, left anterior part
of sternum and or left arm. There was positive history of myocardial
infarction in 12 cases (17%). There was significant relation between
CP and age, sex and between history of myocardial infarction and
marital state of study people. Our results are similar to other studies-
results in most parts, however it is necessary to perform
supplementary tests and follow up studies to differentiate between
cardiac and non-cardiac CP exactly.
Abstract: Medical image data hiding has strict constrains such
as high imperceptibility, high capacity and high robustness.
Achieving these three requirements simultaneously is highly
cumbersome. Some works have been reported in the literature on
data hiding, watermarking and stegnography which are suitable for
telemedicine applications. None is reliable in all aspects. Electronic
Patient Report (EPR) data hiding for telemedicine demand it blind
and reversible. This paper proposes a novel approach to blind
reversible data hiding based on integer wavelet transform.
Experimental results shows that this scheme outperforms the prior
arts in terms of zero BER (Bit Error Rate), higher PSNR (Peak Signal
to Noise Ratio), and large EPR data embedding capacity with
WPSNR (Weighted Peak Signal to Noise Ratio) around 53 dB,
compared with the existing reversible data hiding schemes.
Abstract: This paper discusses the applicability of the Data
Distribution Service (DDS) for the development of automated and modular manufacturing systems which require a flexible and robust
communication infrastructure. DDS is an emergent standard for datacentric publish/subscribe middleware systems that provides an
infrastructure for platform-independent many-to-many
communication. It particularly addresses the needs of real-time systems that require deterministic data transfer, have low memory
footprints and high robustness requirements. After an overview of the
standard, several aspects of DDS are related to current challenges for the development of modern manufacturing systems with distributed architectures. Finally, an example application is presented based on a modular active fixturing system to illustrate the described aspects.
Abstract: This paper is mainly concerned with the application of
a novel technique of data interpretation for classifying measurements
of plasma columns in Tokamak reactors for nuclear fusion
applications. The proposed method exploits several concepts derived
from soft computing theory. In particular, Artificial Neural Networks
and Multi-Class Support Vector Machines have been exploited to
classify magnetic variables useful to determine shape and position of
the plasma with a reduced computational complexity. The proposed
technique is used to analyze simulated databases of plasma equilibria
based on ITER geometry configuration. As well as demonstrating the
successful recovery of scalar equilibrium parameters, we show that
the technique can yield practical advantages compared with earlier
methods.
Abstract: Most scientific programs have large input and output
data sets that require out-of-core programming or use virtual memory
management (VMM). Out-of-core programming is very error-prone
and tedious; as a result, it is generally avoided. However, in many
instance, VMM is not an effective approach because it often results
in substantial performance reduction. In contrast, compiler driven I/O
management will allow a program-s data sets to be retrieved in parts,
called blocks or tiles. Comanche (COmpiler MANaged caCHE) is a
compiler combined with a user level runtime system that can be used
to replace standard VMM for out-of-core programs. We describe
Comanche and demonstrate on a number of representative problems
that it substantially out-performs VMM. Significantly our system
does not require any special services from the operating system and
does not require modification of the operating system kernel.
Abstract: We study the spatial design of experiment and we want to select a most informative subset, having prespecified size, from a set of correlated random variables. The problem arises in many applied domains, such as meteorology, environmental statistics, and statistical geology. In these applications, observations can be collected at different locations and possibly at different times. In spatial design, when the design region and the set of interest are discrete then the covariance matrix completely describe any objective function and our goal is to choose a feasible design that minimizes the resulting uncertainty. The problem is recast as that of maximizing the determinant of the covariance matrix of the chosen subset. This problem is NP-hard. For using these designs in computer experiments, in many cases, the design space is very large and it's not possible to calculate the exact optimal solution. Heuristic optimization methods can discover efficient experiment designs in situations where traditional designs cannot be applied, exchange methods are ineffective and exact solution not possible. We developed a GA algorithm to take advantage of the exploratory power of this algorithm. The successful application of this method is demonstrated in large design space. We consider a real case of design of experiment. In our problem, design space is very large and for solving the problem, we used proposed GA algorithm.
Abstract: The paper presents the brief information on particular results of experimental study focused to the problems of behavior of structural plated components made of fiber-cement-based materials and used in building constructions, exposed to atmospheric physical effects given by the weather changes in the summer period. Weather changes represented namely by temperature and rain cause also the changes of the temperature and moisture of the investigated structural components. This can affect their static behavior that means stresses and deformations, which have been monitored as the main outputs of tests performed. Experimental verification is based on the simulation of the influence of temperature and rain using the defined procedure of warming and water sprinkling with respect to the corresponding weather conditions during summer period in the South Moravian region at the Czech Republic, for which the application of these structural components is mainly planned. Two types of components have been tested: (i) glass-fiber-concrete panels used for building façades and (ii) fiber-cement slabs used mainly for claddings, but also as a part of floor structures or lost shuttering, and so on.
Abstract: This paper demonstrates design and construction of
microcontroller-based telephone exchange system and the aims of
this paper is to study telecommunication, connection with
PIC16F877A and DTMF MT8870D. In microcontroller system, PIC
16F877 microcontroller is used to control the call processing. Dial
tone, busy tone and ring tone are provided during call progress.
Instead of using ready made tone generator IC, oscillator based tone
generator is used. The results of this telephone exchange system are
perfect for homes and small businesses needing the extensions. It
requires the phone operation control system, the analog interface
circuit and the switching circuit. This exchange design will contain
eight channels.
It is the best low cost, good quality telephone exchange for today-s
telecommunication needs. It offers the features available in much
more expensive PBX units without using high-priced phones. It is for
long distance telephone services.
Abstract: Given that entrepreneurship is a very significant factor of regional development, it is necessary to approach systematically the development with measures of regional politics. According to international classification The Nomenclature of Territorial Units for Statistics (NUTS II), there are three regions in Croatia. The indicators of entrepreneurial activities on the national level of Croatia are analyzed in the paper, taking into consideration the results of referent research. The level of regional development is shown based on the analysis of entrepreneurs- operations. The results of the analysis show a very unfavorable situation in entrepreneurial activities on the national level of Croatia. The origin of this situation is to be found in the surroundings with an expressed inequality of regional development, which is caused by the non-existence of a strategically directed regional policy. In this paper recommendations which could contribute to the reduction of regional inequality in Croatia, have been made.
Abstract: This paper presents a video transmission system using
layered multiple description (coding (MDC) and multi-path transport
for reliable video communications in wireless ad-hoc networks.
The proposed MDC extends a quality-scalable H.264/AVC video
coding algorithm to generate two independent descriptions. The two
descriptions are transmitted over different paths to a receiver in order
to alleviate the effect of unstable channel conditions of wireless adhoc
networks. If one description is lost due to transmission erros,
then the correctly received description is used to estimate the lost
information of the corrupted description. The proposed MD coder
maintains an adequate video quality as long as both description are
not simultaneously lost. Simulation results show that the proposed
MD coding combined with multi-path transport system is largely
immune to packet losses, and therefore, can be a promising solution
for robust video communications over wireless ad-hoc networks.