Abstract: This paper presents the design, analysis and
development of permanent magnet (PM) torque couplers. These
couplers employ rare-earth magnets. Based on finite element analysis
and earlier analytical works both concentric and face-type
synchronous type couplers have been designed and fabricated. The
experimental performance has good correlation with finite element
calculations.
Abstract: Given a parallel program to be executed on a heterogeneous
computing system, the overall execution time of the program
is determined by a schedule. In this paper, we analyze the worst-case
performance of the list scheduling algorithm for scheduling tasks
of a parallel program in a mixed-machine heterogeneous computing
system such that the total execution time of the program is minimized.
We prove tight lower and upper bounds for the worst-case
performance ratio of the list scheduling algorithm. We also examine
the average-case performance of the list scheduling algorithm. Our
experimental data reveal that the average-case performance of the list
scheduling algorithm is much better than the worst-case performance
and is very close to optimal, except for large systems with large
heterogeneity. Thus, the list scheduling algorithm is very useful in
real applications.
Abstract: Shear walls are used in most of the tall buildings for
carrying the lateral load. When openings for doors or windows are
necessary to be existed in the shear walls, a special type of the shear
walls is used called "coupled shear walls" which in some cases is
stiffened by specific beams and so, called "stiffened coupled shear
walls".
In this paper, a mathematical method for geometrically nonlinear
analysis of the stiffened coupled shear walls has been presented.
Then, a suitable formulation for determining the critical load of the
stiffened coupled shear walls under gravity force has been proposed.
The governing differential equations for equilibrium and deformation
of the stiffened coupled shear walls have been obtained by setting up
the equilibrium equations and the moment-curvature relationships for
each wall. Because of the complexity of the differential equation, the
energy method has been adopted for approximate solution of the
equations.
Abstract: Encrypted messages sending frequently draws the attention
of third parties, perhaps causing attempts to break and
reveal the original messages. Steganography is introduced to hide
the existence of the communication by concealing a secret message
in an appropriate carrier like text, image, audio or video. Quantum
steganography where the sender (Alice) embeds her steganographic
information into the cover and sends it to the receiver (Bob) over a
communication channel. Alice and Bob share an algorithm and hide
quantum information in the cover. An eavesdropper (Eve) without
access to the algorithm can-t find out the existence of the quantum
message. In this paper, a text quantum steganography technique based
on the use of indefinite articles (a) or (an) in conjunction with the nonspecific
or non-particular nouns in English language and quantum
gate truth table have been proposed. The authors also introduced a
new code representation technique (SSCE - Secret Steganography
Code for Embedding) at both ends in order to achieve high level of
security. Before the embedding operation each character of the secret
message has been converted to SSCE Value and then embeds to cover
text. Finally stego text is formed and transmits to the receiver side.
At the receiver side different reverse operation has been carried out
to get back the original information.
Abstract: The stilling basins are commonly used to dissipate the
energy and protect the downstream floor from erosion. The aim of
the present experimental work is to improve the roughened stilling
basin using T-shape roughness instead of the regular cubic one and
design this new shape. As a result of the present work the best
intensity and the best roughness length are identified. Also, it is
found that the T-shape roughness save materials and reduce the jump
length compared to the cubic one. Sensitivity analysis was performed
and it was noticed that the change in the length of jump is more
sensitive to the change in roughness length than the change in
intensity.
Abstract: Medical image modalities such as computed
tomography (CT), magnetic resonance imaging (MRI), ultrasound
(US), X-ray are adapted to diagnose disease. These modalities
provide flexible means of reviewing anatomical cross-sections and
physiological state in different parts of the human body. The raw
medical images have a huge file size and need large storage
requirements. So it should be such a way to reduce the size of those
image files to be valid for telemedicine applications. Thus the image
compression is a key factor to reduce the bit rate for transmission or
storage while maintaining an acceptable reproduction quality, but it is
natural to rise the question of how much an image can be compressed
and still preserve sufficient information for a given clinical
application. Many techniques for achieving data compression have
been introduced. In this study, three different MRI modalities which
are Brain, Spine and Knee have been compressed and reconstructed
using wavelet transform. Subjective and objective evaluation has
been done to investigate the clinical information quality of the
compressed images. For the objective evaluation, the results show
that the PSNR which indicates the quality of the reconstructed image
is ranging from (21.95 dB to 30.80 dB, 27.25 dB to 35.75 dB, and
26.93 dB to 34.93 dB) for Brain, Spine, and Knee respectively. For
the subjective evaluation test, the results show that the compression
ratio of 40:1 was acceptable for brain image, whereas for spine and
knee images 50:1 was acceptable.
Abstract: Cryptography provides the secure manner of
information transmission over the insecure channel. It authenticates
messages based on the key but not on the user. It requires a lengthy
key to encrypt and decrypt the sending and receiving the messages,
respectively. But these keys can be guessed or cracked. Moreover,
Maintaining and sharing lengthy, random keys in enciphering and
deciphering process is the critical problem in the cryptography
system. A new approach is described for generating a crypto key,
which is acquired from a person-s iris pattern. In the biometric field,
template created by the biometric algorithm can only be
authenticated with the same person. Among the biometric templates,
iris features can efficiently be distinguished with individuals and
produces less false positives in the larger population. This type of iris
code distribution provides merely less intra-class variability that aids
the cryptosystem to confidently decrypt messages with an exact
matching of iris pattern. In this proposed approach, the iris features
are extracted using multi resolution wavelets. It produces 135-bit iris
codes from each subject and is used for encrypting/decrypting the
messages. The autocorrelators are used to recall original messages
from the partially corrupted data produced by the decryption process.
It intends to resolve the repudiation and key management problems.
Results were analyzed in both conventional iris cryptography system
(CIC) and non-repudiation iris cryptography system (NRIC). It
shows that this new approach provides considerably high
authentication in enciphering and deciphering processes.
Abstract: This paper presents a threshold voltage model of pocket implanted sub-100 nm n-MOSFETs incorporating the drain and substrate bias effects using two linear pocket profiles. Two linear equations are used to simulate the pocket profiles along the channel at the surface from the source and drain edges towards the center of the n-MOSFET. Then the effective doping concentration is derived and is used in the threshold voltage equation that is obtained by solving the Poisson-s equation in the depletion region at the surface. Simulated threshold voltages for various gate lengths fit well with the experimental data already published in the literature. The simulated result is compared with the two other pocket profiles used to derive the threshold voltage models of n-MOSFETs. The comparison shows that the linear model has a simple compact form that can be utilized to study and characterize the pocket implanted advanced ULSI devices.
Abstract: Based on 276 responses from academic staff in an
evaluation of an online learning environment (OLE), this paper
identifies those elements of the OLE that were most used and valued
by staff, those elements of the OLE that staff most wanted to see
improved, and those factors that most contributed to staff perceptions
that the use of the OLE enhanced their teaching. The most used and
valued elements were core functions, including accessing unit
information, accessing lecture/tutorial/lab notes, and reading online
discussions. The elements identified as most needing attention related
to online assessment: submitting assignments, managing assessment
items, and receiving feedback on assignments. Staff felt that using the
OLE enhanced their teaching when they were satisfied that their
students were able to access and use their learning materials, and
when they were satisfied with the professional development they
received and were confident with their ability to teach with the OLE.
Abstract: wind catchers have been served as a cooling system, used to provide acceptable ventilation by means of renewable energy of wind. In the present study, the city of Yazd in arid climate is selected as case study. From the architecture point of view, learning about wind catchers in this study is done by means of field surveys. Research method for selection of the case is based on random form, and analytical method. Wind catcher typology and knowledge of relationship governing the wind catcher's architecture were those measures that are taken for the first time. 53 wind catchers were analyzed. The typology of the wind-catchers is done by the physical analyzing, patterns and common concepts as incorporated in them. How the architecture of wind catcher can influence their operations by analyzing thermal behavior are the archetypes of selected wind catchers. Calculating fluids dynamics science, fluent software and numerical analysis are used in this study as the most accurate analytical approach. The results obtained from these analyses show the formal specifications of wind catchers with optimum operation in Yazd. The knowledge obtained from the optimum model could be used for design and construction of wind catchers with more improved operation
Abstract: The convergence of heterogeneous wireless access technologies characterizes the 4G wireless networks. In such converged systems, the seamless and efficient handoff between
different access technologies (vertical handoff) is essential and remains a challenging problem. The heterogeneous co-existence of access technologies with largely different characteristics creates a decision problem of determining the “best" available network at
“best" time to reduce the unnecessary handoffs. This paper proposes a dynamic decision model to decide the “best" network at “best"
time moment to handoffs. The proposed dynamic decision model make the right vertical handoff decisions by determining the “best"
network at “best" time among available networks based on, dynamic
factors such as “Received Signal Strength(RSS)" of network and
“velocity" of mobile station simultaneously with static factors like Usage Expense, Link capacity(offered bandwidth) and power
consumption. This model not only meets the individual user needs but also improve the whole system performance by reducing the unnecessary handoffs.
Abstract: Sediment and mangrove root samples from Iko River
Estuary, Nigeria were analyzed for microbial and polycyclic
aromatic hydrocarbon (PAH) content. The total heterotrophic
bacterial (THB) count ranged from 1.1x107 to 5.1 x107 cfu/g, total
fungal (TF) count ranged from 1.0x106 to 2.7x106 cfu/g, total
coliform (TC) count ranged from 2.0x104 to 8.0x104cfu/g while
hydrocarbon utilizing bacterial (HUB) count ranged from 1.0x 105 to
5.0 x 105cfu/g. There was a range of positive correlation (r = 0.72 to
0.93) between THB count and total HUB count, respectively. The
organisms were Staphylococcus aureus, Bacillus cereus,
Flavobacterium breve, Pseudomonas aeruginosa, Erwinia
amylovora, Escherichia coli, Enterobacter sp, Desulfovibrio sp,
Acinetobacter iwoffii, Chromobacterium violaceum, Micrococcus
sedentarius, Corynebacterium sp, and Pseudomonas putrefaciens.
The PAH were Naphthalene, 2-Methylnaphthalene, Acenapthylene,
Acenaphthene, Fluorene, Phenanthene, Anthracene, Fluoranthene,
Pyrene, Benzo(a)anthracene, Chrysene, Benzo(b)fluoranthene,
Benzo(k)fluoranthene, Benzo(a)pyrene, Dibenzo(a,h)anthracene,
Benzo(g,h,l)perylene ,Indeno(1,2,3-d)pyrene with individual PAH
concentrations that ranged from 0.20mg/kg to 1.02mg/kg, 0.20mg/kg
to 1.07mg/kg and 0.2mg/kg to 4.43mg/kg in the benthic sediment,
epipellic sediment and mangrove roots, respectively. Total PAH
ranged from 6.30 to 9.93mg/kg, 6.30 to 9.13mg/kg and 9.66 to
16.68mg/kg in the benthic sediment, epipellic sediment and
mangrove roots, respectively. The high concentrations in the
mangrove roots are indicative of bioaccumulation of the pollutant in
the plant tissue. The microorganisms are of ecological significance
and the detectable quantities of polycyclic aromatic hydrocarbon
could be partitioned and accumulated in tissues of infaunal and
epifaunal organisms in the study area.
Abstract: The vast amount of information on the World Wide
Web is created and published by many different types of providers.
Unlike books and journals, most of this information is not subject to
editing or peer review by experts. This lack of quality control and the
explosion of web sites make the task of finding quality information
on the web especially critical. Meanwhile new facilities for
producing web pages such as Blogs make this issue more significant
because Blogs have simple content management tools enabling nonexperts
to build easily updatable web diaries or online journals. On
the other hand despite a decade of active research in information
quality (IQ) there is no framework for measuring information quality
on the Blogs yet. This paper presents a novel experimental
framework for ranking quality of information on the Weblog. The
results of data analysis revealed seven IQ dimensions for the Weblog.
For each dimension, variables and related coefficients were
calculated so that presented framework is able to assess IQ of
Weblogs automatically.
Abstract: Friction-stir welding has received a huge interest in the last few years. The many advantages of this promising process have led researchers to present different theoretical and experimental explanation of the process. The way to quantitatively and qualitatively control the different parameters of the friction-stir welding process has not been paved. In this study, a refined energybased model that estimates the energy generated due to friction and plastic deformation is presented. The effect of the plastic deformation at low energy levels is significant and hence a scale factor is introduced to control its effect. The predicted heat energy and the obtained maximum temperature using our model are compared to the theoretical and experimental results available in the literature and a good agreement is obtained. The model is applied to AA6000 and AA7000 series.
Abstract: Educational reforms are focused point of different
nations. New reform movements generally claim that something is
wrong with the current state of affairs, and that the system is deficient in its goals, its accomplishments and it is accused not being
adopted into global changes all over the world. It is the same for
Turkish education system. It is considered those recent reforms of
teacher education in Turkey and the extent to which they reflect a
response to global economic pressures. The paper challenges the
view that such imposes are inevitable determinants of educational
policy and argues that any country will need to develop its own
national approach to modernizing teacher education in light of the
global context and its particular circumstances. It draws on the idea
of reflexive modernization developed by educators and discusses its
implications for teacher education policy. The paper deals with four
themes teacher education in last decade policy in Turkey; the shift
away from the educational disciplines, the shift towards school-based
approaches, and the emergence of more centralized forms of
accountability of teacher competence.
Abstract: Managers as the key employees have a very important
role in maintaining the workforce performance which is critical to the
construction companies- success in the future. If motivated
employees start with motivated managers probably it would seem
plausible if the de-motivated ones start with de-motivated managers.
This study aims to analyze the importance of motivated managers to
their successes and construction companies- successes. In this study,
a quantitative method was used and the study area was in Medan,
North Sumatera. Questionnaire survey was distributed directly to
construction companies in Medan which are listed in the
Construction Services Development Board. A total of 60 managers
responded and the completed questionnaires were analyzed using the
descriptive analysis. The results indicated that the respondents
acknowledge the importance of motivation among themselves to the
projects and construction companies- success, implying that it is vital
to maintain the motivation and good performance of the workforce.
Abstract: This article presents the evolution and technological changes implemented on the full scale simulators developed by the Simulation Department of the Instituto de Investigaciones Eléctricas1 (Mexican Electric Research Institute) and located at different training centers around the Mexican territory, and allows US to know the last updates, basically from the input/output view point, of the current simulators at some facilities of the electrical sector as well as the compatible industry of the electrical manufactures and industries such as Comision Federal de Electricidad (CFE*, The utility Mexican company). Tendencies of these developments and impact within the operators- scope are also presented.
Abstract: Tumor classification is a key area of research in the
field of bioinformatics. Microarray technology is commonly used in
the study of disease diagnosis using gene expression levels. The
main drawback of gene expression data is that it contains thousands
of genes and a very few samples. Feature selection methods are used
to select the informative genes from the microarray. These methods
considerably improve the classification accuracy. In the proposed
method, Genetic Algorithm (GA) is used for effective feature
selection. Informative genes are identified based on the T-Statistics,
Signal-to-Noise Ratio (SNR) and F-Test values. The initial candidate
solutions of GA are obtained from top-m informative genes. The
classification accuracy of k-Nearest Neighbor (kNN) method is used
as the fitness function for GA. In this work, kNN and Support Vector
Machine (SVM) are used as the classifiers. The experimental results
show that the proposed work is suitable for effective feature
selection. With the help of the selected genes, GA-kNN method
achieves 100% accuracy in 4 datasets and GA-SVM method
achieves in 5 out of 10 datasets. The GA with kNN and SVM
methods are demonstrated to be an accurate method for microarray
based tumor classification.
Abstract: The relevance of the study of everyday life in Almaty
and Kyzylorda are associated with the emergence of the modern
trends in historiography and socializing areas of government reform.
The relevance is due to the fact that in the early twentieth century
Kyzylorda and Almaty began to develop as a city and this period has
a special place in the life of the state. An interesting aspect of the
everyday life of the inhabitants of the new city, which was built in the
era of Stalin's Five-Year Plans, can be examined through the eyes of
the Soviet people living in a specific environment, reflecting the life
of the citizens. The study of industrialization of the Soviet Union and
the attention paid to new developments in the first five years of
everyday aspects as the impact of the modernization of the 1930s was
one of the decisive factors in the lives of residents. Among these
factors, we would like to highlight the medical field, which is the
basis of all human life, specifically focusing on the state of medicine
in Alma-Ata in the first 20-30-years of the twentieth century, and
analyze the different aspects of human life, determining the quality of
medical care to the population during this period.
Abstract: Starting with an analysis of the financial and
operational indicators that can be found in the specialised literature,
this study aims to contribute to improvements in the performance
measurement systems used when the unit of analysis is the
manufacturing plant. For this a search was done in the highest impact
Journals of Production and Operations Management and
Management Accounting , with the aim of determining the financial
and operational indicators used to evaluate performance when
Advanced Production Practices have been implemented, more
specifically when the practices implemented are Total Quality
Management, JIT/Lean Manufacturing and Total Productive
Maintenance. This has enabled us to obtain a classification of the two
types of indicators based on how much each is used. For the financial
indicators we have also prepared a proposal that can be adapted to
manufacturing plants- accounting features. In the near future we will
propose a model that links practices implementation with financial
and operational indicators and these two last with each other. We aim
to will test this model empirically with the data obtained in the High
Performance Manufacturing Project.