Abstract: Power line channel is proposed as an alternative for broadband data transmission especially in developing countries like Tanzania [1]. However the channel is affected by stochastic attenuation and deep notches which can lead to the limitation of channel capacity and achievable data rate. Various studies have characterized the channel without giving exactly the maximum performance and limitation in data transfer rate may be this is due to complexity of channel modeling being used. In this paper the channel performance of medium voltage, low voltage and indoor power line channel is presented. In the investigations orthogonal frequency division multiplexing (OFDM) with phase shift keying (PSK) as carrier modulation schemes is considered, for indoor, medium and low voltage channels with typical ten branches and also Golay coding is applied for medium voltage channel. From channels, frequency response deep notches are observed in various frequencies which can lead to reduce the achievable data rate. However, is observed that data rate up to 240Mbps is realized for a signal to noise ratio of about 50dB for indoor and low voltage channels, however for medium voltage a typical link with ten branches is affected by strong multipath and coding is required for feasible broadband data transfer.
Abstract: A computer cluster is a group of tightly coupled
computers that work together closely so that in many respects they
can be viewed as though they are a single computer. The components
of a cluster are commonly, but not always, connected to each other
through fast local area networks. Clusters are usually deployed to
improve performance and/or availability over that provided by a
single computer, while typically being much more cost-effective than
single computers of comparable speed or availability. This paper
proposed the way to implement the Beowulf Cluster in order to
achieve high performance as well as high availability.
Abstract: The African Great Lakes Region refers to the zone
around lakes Victoria, Tanganyika, Albert, Edward, Kivu, and
Malawi. The main source of electricity in this region is hydropower
whose systems are generally characterized by relatively weak,
isolated power schemes, poor maintenance and technical deficiencies
with limited electricity infrastructures. Most of the hydro sources are
rain fed, and as such there is normally a deficiency of water during
the dry seasons and extended droughts. In such calamities fossil fuels
sources, in particular petroleum products and natural gas, are
normally used to rescue the situation but apart from them being nonrenewable,
they also release huge amount of green house gases to our
environment which in turn accelerates the global warming that has at
present reached an amazing stage. Wind power is ample, renewable,
widely distributed, clean, and free energy source that does not
consume or pollute water. Wind generated electricity is one of the
most practical and commercially viable option for grid quality and
utility scale electricity production. However, the main shortcoming
associated with electric wind power generation is fluctuation in its
output both in space and time. Before making a decision to establish
a wind park at a site, the wind speed features there should therefore
be known thoroughly as well as local demand or transmission
capacity. The main objective of this paper is to utilise monthly
average wind speed data collected from one prospective site within
the African Great Lakes Region to demonstrate that the available
wind power there is high enough to generate electricity. The mean
monthly values were calculated from records gathered on hourly
basis for a period of 5 years (2001 to 2005) from a site in Tanzania.
The documentations that were collected at a height of 2 m were
projected to a height of 50 m which is the standard hub height of
wind turbines. The overall monthly average wind speed was found to
be 12.11 m/s whereas June to November was established to be the
windy season as the wind speed during the session is above the
overall monthly wind speed. The available wind power density
corresponding to the overall mean monthly wind speed was evaluated
to be 1072 W/m2, a potential that is worthwhile harvesting for the
purpose of electric generation.
Abstract: Diesel Engines emit complex mixtures of inorganic
and organic compounds in the form of both solid and vapour phase
particles. Most of the particulates released are ultrafine nanoparticles
which are detrimental to human health and can easily enter the body
by respiration. The emissions standards on particulate matter release
from diesel engines are constantly upgraded within the European
Union and with future regulations based on the particles numbers
released instead of merely mass, the need for effective aftertreatment
devices will increase. Standard particulate filters in the form of wall
flow filters can have problems with high soot accumulation,
producing a large exhaust backpressure. A potential solution would
be to combine the standard filter with a flow through filter to reduce
the load on the wall flow filter. In this paper soot particle trapping has
been simulated in different continuous flow filters of monolithic
structure including the use of promoters, at laminar flow conditions.
An Euler Lagrange model, the discrete phase model in Ansys used
with user defined functions for forces acting on particles. A method
to quickly screen trapping of 5 nm and 10 nm particles in different
catalysts designs with tracers was also developed.
Simulations of square duct monoliths with promoters show that the
strength of the vortices produced are not enough to give a high
amount of particle deposition on the catalyst walls. The smallest
particles in the simulations, 5 and 10 nm particles were trapped to a
higher extent, than larger particles up to 1000 nm, in all studied
geometries with the predominant deposition mechanism being
Brownian diffusion. The comparison of the different filters designed
with a wall flow filter does show that the options for altering a design
of a flow through filter, without imposing a too large pressure drop
penalty are good.
Abstract: This paper will present the implementation of QoS
policy based system by utilizing rules on Access Control List (ACL)
over Layer 3 (L3) switch. Also presented is the architecture on that
implementation; the tools being used and the result were gathered.
The system architecture has an ability to control ACL rules which are
installed inside an external L3 switch. ACL rules used to instruct the
way of access control being executed, in order to entertain all traffics
through that particular switch. The main advantage of using this
approach is that the single point of failure could be prevented when
there are any changes on ACL rules inside L3 switches. Another
advantage is that the agent could instruct ACL rules automatically
straight away based on the changes occur on policy database without
configuring them one by one. Other than that, when QoS policy
based system was implemented in distributed environment, the
monitoring process can be synchronized easily due to the automate
process running by agent over external policy devices.
Abstract: In today-s competitive market, most companies
develop manufacturing systems that can help in cost reduction and
maximum quality. Human issues are an important part of
manufacturing systems, yet most companies ignore their effects on
production performance. This paper aims to developing an integrated
workforce planning system that incorporates the human being.
Therefore, a multi-objective mixed integer nonlinear programming
model is developed to determine the amount of hiring, firing,
training, overtime for each worker type. This paper considers a
workforce planning model including human aspects such as skills,
training, workers- personalities, capacity, motivation, and learning
rates. This model helps to minimize the hiring, firing, training and
overtime costs, and maximize the workers- performance. The results
indicate that the workers- differences should be considered in
workforce scheduling to generate realistic plans with minimum costs.
This paper also investigates the effects of human learning rates on the
performance of the production systems.
Abstract: In this paper, a new automated methodology to detect the optic disc (OD) automatically in retinal images from patients with risk of being affected by Diabetic Retinopathy (DR) and Macular Edema (ME) is presented. The detection procedure comprises two independent methodologies. On one hand, a location methodology obtains a pixel that belongs to the OD using image contrast analysis and structure filtering techniques and, on the other hand, a boundary segmentation methodology estimates a circular approximation of the OD boundary by applying mathematical morphology, edge detection techniques and the Circular Hough Transform. The methodologies were tested on a set of 1200 images composed of 229 retinographies from patients affected by DR with risk of ME, 431 with DR and no risk of ME and 540 images of healthy retinas. The location methodology obtained 98.83% success rate, whereas the OD boundary segmentation methodology obtained good circular OD boundary approximation in 94.58% of cases. The average computational time measured over the total set was 1.67 seconds for OD location and 5.78 seconds for OD boundary segmentation.
Abstract: In this paper, different nonlinear dynamics analysis techniques are employed to unveil the rich nonlinear phenomena of the electromagnetic system. In particular, bifurcation diagrams, time responses, phase portraits, Poincare maps, power spectrum analysis, and the construction of basins of attraction are all powerful and effective tools for nonlinear dynamics problems. We also employ the method of Lyapunov exponents to show the occurrence of chaotic motion and to verify those numerical simulation results. Finally, two cases of a chaotic electromagnetic system being effectively controlled by a reference signal or being synchronized to another nonlinear electromagnetic system are presented.
Abstract: The persistent nature of perfluorochemicals (PFCs) has attracted global concern in recent years. Perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) are the most commonly found PFC compounds, and thus their fate and transport play key roles in PFC distribution in the natural environment. The kinetic behavior of PFOS or PFOA on boehmite consists of a fast adsorption process followed by a slow adsorption process which may be attributed to the slow transport of PFOS or PFOA into the boehmite pore surface. The adsorption isotherms estimated the maximum adsorption capacities of PFOS and PFOA on boehmite as 0.877 μg/m2 and 0.633 μg/m2, with the difference primarily due to their different functional groups. The increase of solution pH led to a moderate decrease of PFOS and PFOA adsorption, owing to the increase of ligand exchange reactions and the decrease of electrostatic interactions. The presence of NaCl in solution demonstrated negative effects for PFOS and PFOA adsorption on boehmite surfaces, with potential mechanisms being electrical double layer compression, competitive adsorption of chloride.
Abstract: Language Reforms and potential use of ICTs has been a focal area of Higher Education Commission of Pakistan. Efforts are being accelerated to incorporate fast expanding ICTs to bring qualitative improvement in language instruction in higher education. This paper explores how university teachers are benefitting from ICTs to make their English class effective and what type of problems they face in practicing ICTs during their lectures. An in-depth qualitative study was employed to understand why language teachers tend to use ICTs in their instruction and how they are practicing it. A sample of twenty teachers from five universities located in Islamabad, three from public sector and two from private sector, was selected on non-random (Snowball) sampling basis. An interview with 15 semi-structured items was used as research instruments to collect data. The findings reveal that business English teaching is facilitated and improved through the use of ICTs. The language teachers need special training regarding the practices and implementation of ICTs. It is recommended that initiatives might be taken to equip university language teachers with modern methodology incorporating ICTs as focal area and efforts might be made to remove barriers regarding the training of language teachers and proper usage of ICTs.
Abstract: Structured catalysts formed from the growth of
zeolites on substrates is an area of increasing interest due to the
increased efficiency of the catalytic process, and the ability to
provide superior heat transfer and thermal conductivity for both
exothermic and endothermic processes.
However, the generation of structured catalysts represents a
significant challenge when balancing the relationship variables
between materials properties and catalytic performance, with the
Na2O, H2O and Al2O3 gel composition paying a significant role in
this dynamic, thereby affecting the both the type and range of
application.
The structured catalyst films generated as part of this
investigation have been characterised using a range of techniques,
including X-ray diffraction (XRD), Electron microscopy (SEM),
Energy Dispersive X-ray analysis (EDX) and Thermogravimetric
Analysis (TGA), with the transition from oxide-on-alloy wires to
hydrothermally synthesised uniformly zeolite coated surfaces being
demonstrated using both SEM and XRD. The robustness of the
coatings has been ascertained by subjecting these to thermal cycling
(ambient to 550oC), with the results indicating that the synthesis time
and gel compositions have a crucial effect on the quality of zeolite
growth on the FeCrAlloy wires.
Finally, the activity of the structured catalyst was verified by a
series of comparison experiments with standard zeolite Y catalysts in
powdered pelleted forms.
Abstract: Charge Simulation Method (CSM) is one of the very widely used numerical field computation technique in High Voltage (HV) engineering. The high voltage fields of varying non uniformities are encountered in practice. CSM programs being case specific, the simulation accuracies heavily depend on the user (programmers) experience. Here is an effort to understand CSM errors and evolve some guidelines to setup accurate CSM models, relating non uniformities with assignment factors. The results are for the six-point-charge model of sphere-plane gap geometry. Using genetic algorithm (GA) as tool, optimum assignment factors at different non uniformity factors for this model have been evaluated and analyzed. It is shown that the symmetrically placed six-point-charge models can be good enough to set up CSM programs with potential errors less than 0.1% when the field non uniformity factor is greater than 2.64 (field utilization factor less than 52.76%).
Abstract: In the current context of globalization, a large number of companies sought to develop as a group in order to reach to other markets or meet the necessary criteria for listing on a stock exchange. The issue of consolidated financial statements prepared by a parent, an investor or a venture and the financial reporting standards guiding them therefore becomes even more important. The aim of our paper is to expose this issue in a consistent manner, first by summarizing the international accounting and financial reporting standards applicable before the 1st of January 2013 and considering the role of the crisis in shaping the standard setting process, and secondly by analyzing the newly issued/modified standards and main changes being brought
Abstract: Social ideology, cultural values and principles shaping environment are inferred by environment and structural characteristics of construction site. In other words, this inference manifestation also indicates ideology and culture of its foundation and also applies its principles and values and somehow plays an important role in Cultural Revolution. All human behaviors and artifacts are affected and being influenced by culture. Culture is not abstract concept, it is a spiritual domain that an individual and society grow and develop in it. Social behaviors are affected by environmental comprehension, so the architecture work influences on its audience and it is the environment that fosters social behaviors. Indeed, sustainable architecture should be considered as background of culture for establishing optimal sustainable culture. Since unidentified architecture roots in cultural non identity and abnormalities, so the society possesses identity characteristics and life and as a consequence, the society and architecture are changed by transformation of life style. This article aims to investigate the interaction of architecture, society, environment and sustainable architecture formation in its cultural basis and analyzes the results approaching behavior and sustainable culture in recent era.
Abstract: In this paper is being described a possible use of
virtualization technology in teaching computer networks. The
virtualization can be used as a suitable tool for creating virtual
network laboratories, supplementing the real laboratories and
network simulation software in teaching networking concepts. It will
be given a short description of characteristic projects in the area of
virtualization technology usage in network simulation, network
experiments and engineering education. A method for implementing
laboratory has also been explained, together with possible laboratory
usage and design of laboratory exercises. At the end, the laboratory
test results of virtual laboratory are presented as well.
Abstract: In this paper, we proposed an invention of an
accessory into a communication device that will help humans to be
connected universally. Generally, this device will be made up of
crystal and will combine many technologies that will enable the user
to run various applications and software anywhere and everywhere.
Bringing up the concept of from being user friendly, we had used the
crystal as the main material of the device that will trap the
surrounding lights to produce projection of its screen. This leads to a
lesser energy consumption and allows smaller sized battery to be
used, making the device less bulky. Additionally, we proposed the
usage of micro batteries as our energy source. Thus, researches
regarding crystal were made along with explanations in details of
specification and function of the technology used in the device.
Finally, we had also drawn several views of the invention from
different sides to be visualized.
Abstract: How to maintain the service speeds for the business
to make the biggest profit is a problem worthy of study, which is
discussed in this paper with the use of queuing theory. An M/M/1/N
queuing model with variable input rates, variable service rates and
impatient customers is established, and the following conclusions
are drawn: the stationary distribution of the model, the relationship
between the stationary distribution and the probability that there are n
customers left in the system when a customer leaves (not including
the customer who leaves himself), the busy period of the system,
the average operating cycle, the loss probability for the customers
not entering the system while they arriving at the system, the mean
of the customers who leaves the system being for impatient, the
loss probability for the customers not joining the queue due to the
limited capacity of the system and many other indicators. This paper
also indicates that the following conclusion is not correct: the more
customers the business serve, the more profit they will get. At last,
this paper points out the appropriate service speeds the business
should keep to make the biggest profit.
Abstract: Climate change causes severe effects on natural
habitats, especially wetlands. These challenges require the adaptation
of their management to probable effects of climate change. A
compilation of necessary changes in land management was collected
in a Hungarian area being both national park and Natura 2000 SAC
and SCI site in favor of increasing the resilience and reducing
vulnerability. Several factors, such as ecological aspects, nature
conservation and climatic adaptation should be combined with social
and economic factors during the process of developing climate
change adapted management on vulnerable wetlands. Planning
adaptive management should be determined by a priority order of
conservation aims and evaluation of factors at the determined
planning unit. Mowing techniques, frequency and exact date should
be observed as well as grazing species and their breed, due to
different grazing, group forming and trampling habits. Integrating
landscape history and historical land development into the planning
process is essential.
Abstract: In this paper, we use Generalized Hamiltonian systems approach to synchronize a modified sixth-order Chua's circuit, which generates hyperchaotic dynamics. Synchronization is obtained between the master and slave dynamics with the slave being given by an observer. We apply this approach to transmit private information (analog and binary), while the encoding remains potentially secure.
Abstract: This study sought to uncover the complex role of
stress in the workplace by investigating both positive (eustress) and
negative (distress) stress responses. In particular, the study tested a
mediation model in which organisational stressors (person-job fit and
role overload) influence employee affective wellbeing, both directly
and indirectly through stress responses. Participants were recruited
from retail and finance organisations in Australia and New Zealand,
and asked to complete an anonymous online questionnaire. A total of
140 individuals returned completed questionnaires. The results show
that person-job fit influenced eustress, which in turn had a positive
effect on employee affective wellbeing; and role overload impacted
distress, which in turn held a negative influence on affective
wellbeing. These findings indicate that different organisational
stressors have unique relationships with eustress and distress
responses. Limitations and implications of the study are discussed.