Abstract: Clustering categorical data is more complicated than
the numerical clustering because of its special properties. Scalability
and memory constraint is the challenging problem in clustering large
data set. This paper presents an incremental algorithm to cluster the
categorical data. Frequencies of attribute values contribute much in
clustering similar categorical objects. In this paper we propose new
similarity measures based on the frequencies of attribute values and
its cardinalities. The proposed measures and the algorithm are
experimented with the data sets from UCI data repository. Results
prove that the proposed method generates better clusters than the
existing one.
Abstract: Recently, permeable breakwaters have been suggested to overcome the disadvantages of fully protection breakwaters. These protection structures have minor impacts on the coastal environment and neighboring beaches where they provide a more economical protection from waves and currents. For regular waves, a numerical model is used (FLOW-3D, VOF) to investigate the hydraulic performance of a permeable breakwater. The model of permeable breakwater consists of a pair of identical vertical slotted walls with an impermeable upper and lower part, where the draft is a decimal multiple of the total depth. The middle part is permeable with a porosity of 50%. The second barrier is located at distant of 0.5 and 1.5 of the water depth from the first one. The numerical model is validated by comparisons with previous laboratory data and semi-analytical results of the same model. A good agreement between the numerical results and both laboratory data and semi-analytical results has been shown and the results indicate the applicability of the numerical model to reproduce most of the important features of the interaction. Through the numerical investigation, the friction factor of the model is carefully discussed.
Abstract: In this paper we present the PC cluster built at R.V.
College of Engineering (with great help from the Department of
Computer Science and Electrical Engineering). The structure of the
cluster is described and the performance is evaluated by rendering of
complex 3D Persistence of Vision (POV) images by the Ray-Tracing
algorithm. Here, we propose an unexampled method to render such
images, distributedly on a low cost scalable.
Abstract: An important structuring mechanism for knowledge bases is building clusters based on the content of their knowledge objects. The objects are clustered based on the principle of maximizing the intraclass similarity and minimizing the interclass similarity. Clustering can also facilitate taxonomy formation, that is, the organization of observations into a hierarchy of classes that group similar events together. Hierarchical representation allows us to easily manage the complexity of knowledge, to view the knowledge at different levels of details, and to focus our attention on the interesting aspects only. One of such efficient and easy to understand systems is Hierarchical Production rule (HPRs) system. A HPR, a standard production rule augmented with generality and specificity information, is of the following form Decision If < condition> Generality Specificity . HPRs systems are capable of handling taxonomical structures inherent in the knowledge about the real world. In this paper, a set of related HPRs is called a cluster and is represented by a HPR-tree. This paper discusses an algorithm based on cumulative learning scenario for dynamic structuring of clusters. The proposed scheme incrementally incorporates new knowledge into the set of clusters from the previous episodes and also maintains summary of clusters as Synopsis to be used in the future episodes. Examples are given to demonstrate the behaviour of the proposed scheme. The suggested incremental structuring of clusters would be useful in mining data streams.
Abstract: This paper presents a comparison between Spectrum-
Sliced Wavelength Division Multiplexing (SS-WDM) and Spectrum
Amplitude Coding Optical Code Division Multiple Access (SAC
Optical CDMA) systems for different light sources. The performance
of the system is shown in the simulated results of the bit error rate
(BER) and the eye diagram of both systems. The comparison results
indicate that the Multiple Access Interference (MAI) effects have a
significant impact on SS-WDM over SAC Optical CDMA systems.
Finally, in terms of spectral efficiency at constant BER of 10-12, SSWDM
offers higher spectral efficiency than optical CDMA since no
bandwidth expansion in needed.
Abstract: Antifungal activities of ether and methanolic extracts of volatiles oils of Nigella Sativa seeds were tested against pathogenic bacterias and fungies strains.The volatile oil were found to have significant antifungal and antibacterial activities compare to tetracycline, cefuroxime and ciprofloxacin positive controls.The ether and methanolic esxtracts were compared to each other for antifungal and antibacterial activities and ether extracts showed stonger activity than methanolic one.
Abstract: In order to evaluation the effects of natural, biological
and chemical fertilizers on grain yield and chickpea quality, field
experiments were carried out in 2007 and 2008 growing seasons. In
this research the effects of different organic, chemical and biological
fertilizers were investigated on grain yield and quality of chickpea.
Experimental units were arranged in split-split plots based on
randomized complete blocks with three replications. The highest
amounts of yield and yield components were obtained in G1×N5
interaction. Significant increasing of N, P, K, Fe and Mg content in
leaves and grains emphasized on superiority of mentioned treatment
because each one of these nutrients has an approved role in
chlorophyll synthesis and photosynthesis ability of the crop. The
combined application of compost, farmyard manure and chemical
phosphorus (N5) had the best grain quality due to high protein, starch
and total sugar contents, low crude fiber and reduced cooking time.
Abstract: In this paper, Wavelet based ANFIS for finding inter
turn fault of generator is proposed. The detector uniquely responds to
the winding inter turn fault with remarkably high sensitivity.
Discrimination of different percentage of winding affected by inter
turn fault is provided via ANFIS having an Eight dimensional input
vector. This input vector is obtained from features extracted from
DWT of inter turn faulty current leaving the generator phase
winding. Training data for ANFIS are generated via a simulation of
generator with inter turn fault using MATLAB. The proposed
algorithm using ANFIS is giving satisfied performance than ANN
with selected statistical data of decomposed levels of faulty current.
Abstract: Chatter vibration has been a troublesome problem
for a machine tool toward the high precision and high speed machining.
Essentially, the machining performance is determined by the dynamic
characteristics of the machine tool structure and dynamics of cutting
process, which can further be identified in terms of the stability lobe
diagram. Therefore, realization on the machine tool dynamic behavior
can help to enhance the cutting stability. To assess the dynamic
characteristics and machining stability of a vertical milling system
under the influence of a linear guide, this study developed a finite
element model integrated the modeling of linear components with the
implementation of contact stiffness at the rolling interface. Both the
finite element simulations and experimental measurements reveal that
the linear guide with different preload greatly affects the vibration
behavior and milling stability of the vertical column spindle head
system, which also clearly indicate that the predictions of the
machining stability agree well with the cutting tests. It is believed that
the proposed model can be successfully applied to evaluate the
dynamics performance of machine tool systems of various
configurations.
Abstract: The authors present an algorithm for order reduction of linear time invariant dynamic systems using the combined advantages of the eigen spectrum analysis and the error minimization by particle swarm optimization technique. Pole centroid and system stiffness of both original and reduced order systems remain same in this method to determine the poles, whereas zeros are synthesized by minimizing the integral square error in between the transient responses of original and reduced order models using particle swarm optimization technique, pertaining to a unit step input. It is shown that the algorithm has several advantages, e.g. the reduced order models retain the steady-state value and stability of the original system. The algorithm is illustrated with the help of two numerical examples and the results are compared with the other existing techniques.
Abstract: As research performance in academia is treated as one of indices for national competency, many countries devote much attention and resources to increasing their research performance. Understand the research trend is the basic step to improve the research performance. The goal of this research is to design an analysis system to evaluate research trends from analyzing data from different countries. In this paper, information system researches in Taiwan and other countries, including Asian countries and prominent countries represented by the Group of Eight (G8) is used as example. Our research found the trends are varied in different countries. Our research suggested that Taiwan-s scholars can pay more attention to interdisciplinary applications and try to increase their collaboration with other countries, in order to increase Taiwan's competency in the area of information science.
Abstract: Power system stabilizers (PSS) must be capable of providing appropriate stabilization signals over a broad range of
operating conditions and disturbance. Traditional PSS rely on robust
linear design method in an attempt to cover a wider range of operating
condition. Expert or rule-based controllers have also been proposed.
Recently fuzzy logic (FL) as a novel robust control
design method has shown promising results. The emphasis in fuzzy
control design center is around uncertainties in the system parameters
& operating conditions. In this paper a novel Robust Fuzzy Logic Power
System Stabilizer (RFLPSS) design is proposed The RFLPSS
basically utilizes only one measurable Δω signal as input
(generator shaft speed).
The speed signal is discretized resulting in three inputs to the
RFLPSS. There are six rules for the fuzzification and two rules for
defuzzification. To provide robustness, additional signal namely,
speed are used as inputs to RFLPSS enabling appropriate gain
adjustments for the three RFLPSS inputs. Simulation studies
show the superior performance of the RFLPSS compared
with an optimally designed conventional PSS and discrete mode FLPSS.
Abstract: In recent years, response surface methodology (RSM) has
brought many attentions of many quality engineers in different
industries. Most of the published literature on robust design
methodology is basically concerned with optimization of a single
response or quality characteristic which is often most critical to
consumers. For most products, however, quality is multidimensional,
so it is common to observe multiple responses in an experimental
situation. Through this paper interested person will be familiarize
with this methodology via surveying of the most cited technical
papers.
It is believed that the proposed procedure in this study can resolve
a complex parameter design problem with more than two responses.
It can be applied to those areas where there are large data sets and a
number of responses are to be optimized simultaneously. In addition,
the proposed procedure is relatively simple and can be implemented
easily by using ready-made standard statistical packages.
Abstract: Digital Video Terrestrial Broadcasting (DVB-T)
allows combining broadcasting, telephone and data services in one
network. It has facilitated mobile TV broadcasting. Mobile TV
broadcasting is dominated by fragmentation of standards in use in
different continents. In Asia T-DMB and ISDB-T are used while
Europe uses mainly DVB-H and in USA it is MediaFLO. Issues of
royalty for developers of these different incompatible technologies,
investments made and differing local conditions shall make it
difficult to agree on a unified standard in a very near future. Despite
this shortcoming, mobile TV has shown very good market potential.
There are a number of challenges that still exist for regulators,
investors and technology developers but the future looks bright.
There is need for mobile telephone operators to cooperate with
content providers and those operating terrestrial digital broadcasting
infrastructure for mutual benefit.
Abstract: This paper presents a method for obtaining the
desired reference current for Voltage Source Converter (VSC) of the Shunt Active Power Filter (SAPF) using Synchronous Reference Frame Theory. The method relies on the performance of the Proportional-Integral (PI) controller for
obtaining the best control performance of the SAPF. To
improve the performance of the PI controller, the feedback
path to the integral term is introduced to compensate the
winding up phenomenon due to integrator. Using Reference
Frame Transformation, reference signals are transformed from
a - b - c stationery frame to 0 - d - q rotating frame.
Using the PI controller, the reference signals in the 0 - d - q rotating frame are controlled to get the desired reference signals for the Pulse Width Modulation. The synchronizer, the Phase Locked Loop (PLL) with PI filter is used for
synchronization, with much emphasis on minimizing delays. The system performance is examined with Shunt Active Power Filter simulation model.
Abstract: Lateral-torsional buckling (LTB) is one of the
phenomenae controlling the ultimate bending strength of steel Ibeams
carrying distributed loads on top flange. Built-up I-sections
are used as main beams and distributors. This study investigates the
ultimate bending strength of such beams with sections of different
classes including slender elements. The nominal strengths of the
selected beams are calculated for different unsupported lengths
according to the Provisions of the American Institute of Steel
Constructions (AISC-LRFD). These calculations are compared with
results of a nonlinear inelastic study using accurate FE model for this
type of loading. The goal is to investigate the performance of the
provisions for the selected sections. Continuous distributed load at
the top flange of the beams was applied at the FE model.
Imperfections of different values are implemented to the FE model to
examine their effect on the LTB of beams at failure, and hence, their
effect on the ultimate strength of beams. The study also introduces a
procedure for evaluating the performance of the provisions compared
with the accurate FEA results of the selected sections. A simplified
design procedure is given and recommendations for future code
updates are made.
Abstract: A new tool path planning method for 5-axis flank
milling of a globoidal indexing cam is developed in this paper. The
globoidal indexing cam is a practical transmission mechanism due
to its high transmission speed, accuracy and dynamic performance.
Machining the cam profile is a complex and precise task. The profile
surface of the globoidal cam is generated by the conjugate contact
motion of the roller. The generated complex profile surface is usually
machined by 5-axis point-milling method. The point-milling method
is time-consuming compared with flank milling. The tool path for
5-axis flank milling of globoidal cam is developed to improve the
cutting efficiency. The flank milling tool path is globally optimized
according to the minimum zone criterion, and high accuracy is
guaranteed. The computational example and cutting simulation finally
validate the developed method.
Abstract: Hierarchical classification is a problem with applications in many areas as protein function prediction where the dates are hierarchically structured. Therefore, it is necessary the development of algorithms able to induce hierarchical classification models. This paper presents experimenters using the algorithm for hierarchical classification called Multi-label Hierarchical Classification using a Competitive Neural Network (MHC-CNN). It was tested in ten datasets the Gene Ontology (GO) Cellular Component Domain. The results are compared with the Clus-HMC and Clus-HSC using the hF-Measure.
Abstract: The effect of flakes from biologically activated hullless barley grain and malt extract on microbiological safety of yoghurt was studied. Pasteurized milk, freeze-dried yoghurt culture YF-L811 (Chr. Hansen, Denmark), flakes from biologically activated hull-less barley grain (Latvia) and malt extract (Ilgezeem, Latvia) were used for experiments. Yoghurt samples with flakes from biologically activated hull-less barley grain and malt extract were analyzed for total plate count of mesophylic aerobic and facultative anaerobic microorganisms, as well yeasts and moulds population during shelflife. Results showed that the changes of pH and titratable acidity affected the concentration of added malt extract. The lowest pH and the highest titratable acidity were determined in samples YFBG5% ME4% and YFBG5% ME6% on the 14th day. The total plate count decreased in all yoghurt samples except sample YFBG5% ME6%, where was determined the increase of microorganisms from 7th till 14th day. The adding of flakes from biologically activated hull-less barley grain in yoghurt samples caused the higher initial content of yeasts and moulds comparing with control. The growth of yeasts and moulds during shelf-life provided the added malt extract in yoghurt samples. Yoghurt enriched with flakes from biologically activated hull-less barley grain and malt extract from a microbiological perspective is safe product.
Abstract: This paper summaries basic principles and concepts of
intelligent controls, implemented in humanoid robotics as well as
recent algorithms being devised for advanced control of humanoid
robots. Secondly, this paper presents a new approach neuro-fuzzy
system. We have included some simulating results from our
computational intelligence technique that will be applied to our
humanoid robot. Subsequently, we determine a relationship between
joint trajectories and located forces on robot-s foot through a
proposed neuro-fuzzy technique.