Abstract: In this paper, the requirement for Coke quality
prediction, its role in Blast furnaces, and the model output is
explained. By applying method of Artificial Neural Networking
(ANN) using back propagation (BP) algorithm, prediction model has
been developed to predict CSR. Important blast furnace functions
such as permeability, heat exchanging, melting, and reducing
capacity are mostly connected to coke quality. Coke quality is further
dependent upon coal characterization and coke making process
parameters. The ANN model developed is a useful tool for process
experts to adjust the control parameters in case of coke quality
deviations. The model also makes it possible to predict CSR for new
coal blends which are yet to be used in Coke Plant. Input data to the
model was structured into 3 modules, for tenure of past 2 years and
the incremental models thus developed assists in identifying the
group causing the deviation of CSR.
Abstract: Bluetooth is a personal wireless communication
technology and is being applied in many scenarios. It is an emerging
standard for short range, low cost, low power wireless access
technology. Current existing MAC (Medium Access Control)
scheduling schemes only provide best-effort service for all masterslave
connections. It is very challenging to provide QoS (Quality of
Service) support for different connections due to the feature of
Master Driven TDD (Time Division Duplex). However, there is no
solution available to support both delay and bandwidth guarantees
required by real time applications. This paper addresses the issue of
how to enhance QoS support in a Bluetooth piconet. The Bluetooth
specification proposes a Round Robin scheduler as possible solution
for scheduling the transmissions in a Bluetooth Piconet. We propose
an algorithm which will reduce the bandwidth waste and enhance the
efficiency of network. We define token counters to estimate traffic of
real-time slaves. To increase bandwidth utilization, a back-off
mechanism is then presented for best-effort slaves to decrease the
frequency of polling idle slaves. Simulation results demonstrate that
our scheme achieves better performance over the Round Robin
scheduling.
Abstract: For a given specific problem an efficient algorithm has
been the matter of study. However, an alternative approach orthogonal
to this approach comes out, which is called a reduction. In general
for a given specific problem this reduction approach studies how to
convert an original problem into subproblems. This paper proposes
a formal modeling language to support this reduction approach. We
show three examples from the wide area of learning problems. The
benefit is a fast prototyping of algorithms for a given new problem.
Abstract: Random Forests are a powerful classification technique, consisting of a collection of decision trees. One useful feature of Random Forests is the ability to determine the importance of each variable in predicting the outcome. This is done by permuting each variable and computing the change in prediction accuracy before and after the permutation. This variable importance calculation is similar to a one-factor-at a time experiment and therefore is inefficient. In this paper, we use a regular fractional factorial design to determine which variables to permute. Based on the results of the trials in the experiment, we calculate the individual importance of the variables, with improved precision over the standard method. The method is illustrated with a study of student attrition at Monash University.
Abstract: In this paper, we present a novel approach to location
system under indoor environment. The key idea of our work is
accurate distance estimation with cricket-based location system using
A* algorithm. We also use magnetic sensor for detecting obstacles in
indoor environment. Finally, we suggest how this system can be used
in various applications such as asset tracking and monitoring.
Abstract: In this paper, cloud resource broker using goalbased
request in medical application is proposed. To handle recent
huge production of digital images and data in medical informatics
application, the cloud resource broker could be used by medical
practitioner for proper process in discovering and selecting correct
information and application. This paper summarizes several
reviewed articles to relate medical informatics application with
current broker technology and presents a research work in applying
goal-based request in cloud resource broker to optimize the use of
resources in cloud environment. The objective of proposing a new
kind of resource broker is to enhance the current resource
scheduling, discovery, and selection procedures. We believed that
it could help to maximize resources allocation in medical
informatics application.
Abstract: Internet today has a huge impact on all aspects of life,
and also in the area of the broader context of democracy, politics and
politicians. If democracy is freedom of choice, there are a number of
conditions that can ensure in practice the freedom to be achieved and
realized. These preconditions must be achieved regardless of the
manner of voting. The key contribution of ICT to achieve freedom of
choice is that technology enables the correlation of the citizens and
elected representatives on the better way than it was possible without
the Internet. In this sense, we can say that the Internet and ICT are
changing significantly, and potentially improving the environment in
which democratic processes are taking place. This paper aims to
describe trends in use of ICT in democratic processes, and analyzes
the challenges for implementation of e-Democracy in Montenegro
Abstract: The paper focuses on the enhanced stiffness modeling
of robotic manipulators by taking into account influence of the external force/torque acting upon the end point. It implements the
virtual joint technique that describes the compliance of manipulator elements by a set of localized six-dimensional springs separated by
rigid links and perfect joints. In contrast to the conventional
formulation, which is valid for the unloaded mode and small
displacements, the proposed approach implicitly assumes that the loading leads to the non-negligible changes of the manipulator posture and corresponding amendment of the Jacobian. The
developed numerical technique allows computing the static
equilibrium and relevant force/torque reaction of the manipulator for
any given displacement of the end-effector. This enables designer
detecting essentially nonlinear effects in elastic behavior of
manipulator, similar to the buckling of beam elements. It is also proposed the linearization procedure that is based on the inversion of
the dedicated matrix composed of the stiffness parameters of the
virtual springs and the Jacobians/Hessians of the active and passive
joints. The developed technique is illustrated by an application example that deals with the stiffness analysis of a parallel
manipulator of the Orthoglide family
Abstract: Being creative in an educational environment, such as in the university, has many times been downplayed by bureaucracy, human inadequacy and physical hindrance. These factors control, stifle and subsequently condemn this natural phenomenon which is normally exuded by the tertiary community. If taken in a positive light, creativity has always led to many new discoveries and inventions. These creations are then gradually developed for the university reputation and achievements, in all fields of studies from the sciences to the humanities. This paper attempts to explore, through more than twenty years of observation, issues that stifle the university citizenry – academicians and students- – creativity. It also scrutinizes how enhancement of such creativity can be further supported by bureaucracy simplicity, encouraging and developing human potential and constructing uncompromising physical infrastructure and administrative support. These ideals – all of which can help to promote creativity, increases the productivity of the university community in aspects of teaching, research, publication, innovation and commercialization; be it at national as well as at international arena for the good of human and societal growth and development. This discursive presentation hopes to address another issue on promoting university community creativity through several deliverables which require cooperation from every quarter of the institution so that being creative continues to be promoted for sustainable human capital growth and development of the country, if not, the global community.
Abstract: Web usage mining algorithms have been widely
utilized for modeling user web navigation behavior. In this study we
advance a model for mining of user-s navigation pattern. The model
makes user model based on expectation-maximization (EM)
algorithm.An EM algorithm is used in statistics for finding maximum
likelihood estimates of parameters in probabilistic models, where the
model depends on unobserved latent variables. The experimental
results represent that by decreasing the number of clusters, the log
likelihood converges toward lower values and probability of the
largest cluster will be decreased while the number of the clusters
increases in each treatment.
Abstract: Detection of incipient abnormal events is important to
improve safety and reliability of machine operations and reduce losses
caused by failures. Improper set-ups or aligning of parts often leads to
severe problems in many machines. The construction of prediction
models for predicting faulty conditions is quite essential in making
decisions on when to perform machine maintenance. This paper
presents a multivariate calibration monitoring approach based on the
statistical analysis of machine measurement data. The calibration
model is used to predict two faulty conditions from historical reference
data. This approach utilizes genetic algorithms (GA) based variable
selection, and we evaluate the predictive performance of several
prediction methods using real data. The results shows that the
calibration model based on supervised probabilistic principal
component analysis (SPPCA) yielded best performance in this work.
By adopting a proper variable selection scheme in calibration models,
the prediction performance can be improved by excluding
non-informative variables from their model building steps.
Abstract: This article proposes an Ant Colony Optimization
(ACO) metaheuristic to minimize total makespan for scheduling a set
of jobs and assign workers for uniformly related parallel machines.
An algorithm based on ACO has been developed and coded on a
computer program Matlab®, to solve this problem. The paper
explains various steps to apply Ant Colony approach to the problem
of minimizing makespan for the worker assignment & jobs
scheduling problem in a parallel machine model and is aimed at
evaluating the strength of ACO as compared to other conventional
approaches. One data set containing 100 problems (12 Jobs, 03
machines and 10 workers) which is available on internet, has been
taken and solved through this ACO algorithm. The results of our
ACO based algorithm has shown drastically improved results,
especially, in terms of negligible computational effort of CPU, to
reach the optimal solution. In our case, the time taken to solve all 100
problems is even lesser than the average time taken to solve one
problem in the data set by other conventional approaches like GA
algorithm and SPT-A/LMC heuristics.
Abstract: The objective of this paper is to analyze the
performance of a double-sided axial flux permanent magnet
brushless DC (AFPM BLDC) motor with two-phase winding.
To study the motor operation, a mathematical dynamic model
has been proposed for motor, which became the basis for
simulations that were performed using MATLAB/SIMULINK
software package. The results of simulations were presented
in form of the waveforms of selected quantities and the
electromechanical characteristics performed by the motor. The
calculation results show that the two-phase motor version
develops smooth torque and reaches high efficiency. The twophase
motor can be applied where more smooth torque is
required. Finally a study on the influence of switching angle
on motor performance shows that when advance switching
technique is used, the motor operates with the highest
efficiency.
Abstract: Failure in mastery of motor skills proficiency during
childhood has been seen as a detrimental factor for children to be
physically active. Lack of motor skills proficiency tends to reduce
children’s competency and confidence level to participate in physical
activity. As a consequence of less participation in physical activity,
children will turn to be overweight and obese. It has been suggested
that children who master motor skill proficiency will be more
involved in physical activity thus preventing them from being
overweight. Obesity has become a serious childhood health issues
worldwide. Previous studies have found that children who were
overweight and obese were generally less active however these
studies focused on one gender. This study aims to compare motor
skill proficiency of underweight, normal-weight, overweight and
obese young boys as well as to determine the relationship between
motor skills proficiency and body composition. 112 boys aged
between 8 to 10 years old participated in this study. Participants were
assigned to four groups; underweight, normal-weight, overweight and
obese using BMI-age percentile chart for children. Bruininks-
Oseretsky Test Second Edition-Short Form was administered to
assess their motor skill proficiency. Meanwhile, body composition
was determined by the skinfold thickness measurement. Result
indicated that underweight and normal children were superior in
motor skills proficiency compared to overweight and obese children
(p < 0.05). A significant strong inverse correlation between motor
skills proficiency and body composition (r = -0.849) is noted. The
findings of this study could be explained by non-contributory mass
that carried by overweight and obese children leads to biomechanical
movement inefficiency which will become detrimental to motor skills
proficiency. It can be concluded that motor skills proficiency is
inversely correlated with body composition.
Abstract: The Siemens Healthcare Sector is one of the world's
largest suppliers to the healthcare industry and a trendsetter in
medical imaging and therapy, laboratory diagnostics, medical
information technology, and hearing aids.
Siemens offers its customers products and solutions for the entire
range of patient care from a single source – from prevention and
early detection to diagnosis, and on to treatment and aftercare. By
optimizing clinical workflows for the most common diseases,
Siemens also makes healthcare faster, better, and more cost effective.
The optimization of clinical workflows requires a
multidisciplinary focus and a collaborative approach of e.g. medical
advisors, researchers and scientists as well as healthcare economists.
This new form of collaboration brings together experts with deep
technical experience, physicians with specialized medical knowledge
as well as people with comprehensive knowledge about health
economics.
As Charles Darwin is often quoted as saying, “It is neither the
strongest of the species that survive, nor the most intelligent, but the
one most responsive to change," We believe that those who can
successfully manage this change will emerge as winners, with
valuable competitive advantage.
Current medical information and knowledge are some of the core
assets in the healthcare industry. The main issue is to connect
knowledge holders and knowledge recipients from various
disciplines efficiently in order to spread and distribute knowledge.
Abstract: Combined experimental and computational analysis of
hygrothermal performance of an interior thermal insulation system
applied on a brick wall is presented in the paper. In the experimental
part, the functionality of the insulation system is tested at simulated
difference climate conditions using a semi-scale device. The
measured temperature and relative humidity profiles are used for the
calibration of computer code HEMOT that is finally applied for a
long-term hygrothermal analysis of the investigated structure.
Abstract: Coal will continue to be the predominant source of
global energy for coming several decades. The huge generation of fly
ash (FA) from combustion of coal in thermal power plants (TPPs) is
apprehended to pose the concerns of its disposal and utilization. FA
application based on its typical characteristics as soil ameliorant for
agriculture and forestry is the potential area, and hence the global
attempt. The inferences drawn suffer from the variations of ash
characteristics, soil types, and agro-climatic conditions; thereby
correlating the effects of ash between various plant species and soil
types is difficult. Indian FAs have low bulk density, high water
holding capacity and porosity, rich silt-sized particles, alkaline
nature, negligible solubility, and reasonable plant nutrients. Findings
of the demonstrations trials for more than two decades from lab/pot
to field scale long-term experiments are developed as FA soil
amendment technology (FASAT) by Central Institute of Mining and
Fuel Research (CIMFR), Dhanbad. Performance of different crops
and plant species in cultivable and problematic soils, are
encouraging, eco-friendly, and being adopted by the farmers. FA
application includes ash alone and in combination with
inorganic/organic amendments; combination treatments including
bio-solids perform better than FA alone. Optimum dose being up to
100 t/ha for cultivable land and up to/ or above 200 t/ha of FA for
waste/degraded land/mine refuse, depending on the characteristics of
ash and soil. The elemental toxicity in Indian FA is usually not of
much concern owing to alkaline ashes, oxide forms of elements, and
elemental concentration within the threshold limits for soil
application. Combating toxicity, if any, is possible through
combination treatments with organic materials and phytoremediation.
Government initiatives through extension programme
involving farmers and ash generating organizations need to be
accelerated
Abstract: An experiment was implemented in a filed in the south of Morocco to evaluate the effects of domestic treated wastewater use for irrigation of amaranth crop under semi-arid conditions. Three varieties (A0020, A0057 & A211) were tested and irrigated using domestic treated wastewater EC1 (0,92 dS/m) as control, EC3 (3dS/m) and EC6 (6dS/m) obtained by adding sea water. In term of growth, an increase of the EC level of applied irrigation water reduced significantly the plant-s height, leaf area, fresh and dry weight measured at vegetative, flowering and maturity stage for all varieties. Even with the application of the EC6, yields were relatively higher in comparison with the once obtained in normal cultivation conditions. A significant accumulation of nitrate, chloride and sodium in soil layers during the crop cycle was noted. The use of treated waste water for its irrigation is proved to be possible. The variety A211 had showed to be less sensitive to salinity stress and it could be more promising its introduction to study area.
Abstract: Solidification cracking and hydrogen cracking are some defects generated in the fusion welding of ultrahigh carbon steels. However, friction stir welding (FSW) of such steels, being a solid-state technique, has been demonstrated to alleviate such problems encountered in traditional welding. FSW include different process parameters that must be carefully defined prior processing. These parameters included but not restricted to: tool feed, tool RPM, tool geometry, tool tilt angle. These parameters form a key factor behind avoiding warm holes and voids behind the tool and in achieving a defect-free weld. More importantly, these parameters directly affect the microstructure of the weld and hence the final mechanical properties of weld. For that, 3D finite element (FE) thermo-mechanical model was developed using DEFORM 3D to simulate FSW of carbon steel. At points of interest in the joint, tracking is done for history of critical state variables such as temperature, stresses, and strain rates. Typical results found include the ability to simulate different weld zones. Simulations predictions were successfully compared to experimental FSW tests. It is believed that such a numerical model can be used to optimize FSW processing parameters to favor desirable defect free weld with better mechanical properties.
Abstract: Wireless ad hoc nodes are freely and dynamically
self-organize in communicating with others. Each node can act as
host or router. However it actually depends on the capability of
nodes in terms of its current power level, signal strength, number
of hops, routing protocol, interference and others. In this research,
a study was conducted to observe the effect of hops count over
different network topologies that contribute to TCP Congestion
Control performance degradation. To achieve this objective, a
simulation using NS-2 with different topologies have been
evaluated. The comparative analysis has been discussed based on
standard observation metrics: throughput, delay and packet loss
ratio. As a result, there is a relationship between types of topology
and hops counts towards the performance of ad hoc network. In
future, the extension study will be carried out to investigate the
effect of different error rate and background traffic over same
topologies.