Abstract: In this paper, we have combined some spatial derivatives with the optimised time derivative proposed by Tam and Webb in order to approximate the linear advection equation which is given by = 0. Ôêé Ôêé + Ôêé Ôêé x f t u These spatial derivatives are as follows: a standard 7-point 6 th -order central difference scheme (ST7), a standard 9-point 8 th -order central difference scheme (ST9) and optimised schemes designed by Tam and Webb, Lockard et al., Zingg et al., Zhuang and Chen, Bogey and Bailly. Thus, these seven different spatial derivatives have been coupled with the optimised time derivative to obtain seven different finite-difference schemes to approximate the linear advection equation. We have analysed the variation of the modified wavenumber and group velocity, both with respect to the exact wavenumber for each spatial derivative. The problems considered are the 1-D propagation of a Boxcar function, propagation of an initial disturbance consisting of a sine and Gaussian function and the propagation of a Gaussian profile. It is known that the choice of the cfl number affects the quality of results in terms of dissipation and dispersion characteristics. Based on the numerical experiments solved and numerical methods used to approximate the linear advection equation, it is observed in this work, that the quality of results is dependent on the choice of the cfl number, even for optimised numerical methods. The errors from the numerical results have been quantified into dispersion and dissipation using a technique devised by Takacs. Also, the quantity, Exponential Error for Low Dispersion and Low Dissipation, eeldld has been computed from the numerical results. Moreover, based on this work, it has been found that when the quantity, eeldld can be used as a measure of the total error. In particular, the total error is a minimum when the eeldld is a minimum.
Abstract: The purpose of this research is to determine the
knowledge and skills possessed by instructional design (ID)
practitioners in Malaysia. As ID is a relatively new field in the
country and there seems to be an absence of any studies on its
community of practice, the main objective of this research is to
discover the tasks and activities performed by ID practitioners in
educational and corporate organizations as suggested by the
International Board of Standards for Training, Performance and
Instruction. This includes finding out the ID models applied in the
course of their work. This research also attempts to identify the
barriers and issues as to why some ID tasks and activities are rarely
or never conducted. The methodology employed in this descriptive
study was a survey questionnaire sent to 30 instructional designers
nationwide. The results showed that majority of the tasks and
activities are carried out frequently enough but omissions do occur
due to reasons such as it being out of job scope, the decision was
already made at a higher level, and the lack of knowledge and skills.
Further investigations of a qualitative manner should be conducted
to achieve a more in-depth understanding of ID practices in
Malaysia
Abstract: An unstructured finite volume numerical model is
presented here for simulating shallow-water flows with wetting and
drying fronts. The model is based on the Green-s theorem in
combination with Chorin-s projection method. A 2nd-order upwind
scheme coupled with a Least Square technique is used to handle
convection terms. An Wetting and drying treatment is used in the
present model to ensures the total mass conservation. To test it-s
capacity and reliability, the present model is used to solve the
Parabolic Bowl problem. We compare our numerical solutions with
the corresponding analytical and existing standard numerical results.
Excellent agreements are found in all the cases.
Abstract: Information is power. Geographical information is an
emerging science that is advancing the development of knowledge to
further help in the understanding of the relationship of “place" with
other disciplines such as crime. The researchers used crime data for
the years 2004 to 2007 from the Baguio City Police Office to
determine the incidence and actual locations of crime hotspots.
Combined qualitative and quantitative research methodology was
employed through extensive fieldwork and observation, geographic
visualization with Geographic Information Systems (GIS) and Global
Positioning Systems (GPS), and data mining. The paper discusses
emerging geographic visualization and data mining tools and
methodologies that can be used to generate baseline data for
environmental initiatives such as urban renewal and rejuvenation.
The study was able to demonstrate that crime hotspots can be
computed and were seen to be occurring to some select places in the
Central Business District (CBD) of Baguio City. It was observed that
some characteristics of the hotspot places- physical design and milieu
may play an important role in creating opportunities for crime. A list
of these environmental attributes was generated. This derived
information may be used to guide the design or redesign of the urban
environment of the City to be able to reduce crime and at the same
time improve it physically.
Abstract: This research contribution is drafted to present the
orbit design, orbit propagator and geomagnetic field estimator for the
nanosatellites specifically for the upcoming CUBESAT, ICUBE-1 of
the Institute of Space Technology (IST), Islamabad, Pakistan. The
ICUBE mission is designed for the low earth orbit at the approximate
height of 700KM. The presented research endeavor designs the
Keplarian elements for ICUBE-1 orbit while incorporating the
mission requirements and propagates the orbit using J2 perturbations,
The attitude determination system of the ICUBE-1 consists of
attitude determination sensors like magnetometer and sun sensor. The
Geomagnetic field estimator is developed according to the model of
International Geomagnetic Reference Field (IGRF) for comparing the
magnetic field measurements by the magnetometer for attitude
determination. The output of the propagator namely the Keplarians
position and velocity vectors and the magnetic field vectors are
compared and verified with the same scenario generated in the
Satellite Tool Kit (STK).
Abstract: The paper presents an overview of environmental
issues that may be expected with nuclear desalination. The analysis
of coupling nuclear power with desalination plants indicates that
adverse marine impacts can be mitigated with alternative intake
designs or cooling systems. The atmospheric impact of desalination
may be greatly reduced through the coupling with nuclear power,
while maximizing the socio-economic benefit for both processes. The
potential for tritium contamination of the desalinated water was
reviewed. Experience with the systems and practices related to the
radiological quality of the product water, shows no examples of
cross-contamination. Furthermore, the indicators for the public
acceptance of nuclear desalination, as one of the most important
sustainability aspects of any such large project, show a positive trend.
From the data collected, a conclusion is made that nuclear
desalination should be supported by decision-makers.
Abstract: In this paper the reference current for Voltage Source
Converter (VSC) of the Shunt Active Power Filter (SAPF) is
generated using Synchronous Reference Frame method,
incorporating the PI controller with anti-windup scheme. The
proposed method improves the harmonic filtering by compensating
the winding up phenomenon caused by the integral term of the PI
controller.
Using Reference Frame Transformation, the current is transformed
from om a - b - c stationery frame to rotating 0 - d - q frame. Using
the PI controller, the current in the 0 - d - q frame is controlled to
get the desired reference signal. A controller with integral action
combined with an actuator that becomes saturated can give some
undesirable effects. If the control error is so large that the integrator
saturates the actuator, the feedback path becomes ineffective because
the actuator will remain saturated even if the process output changes.
The integrator being an unstable system may then integrate to a very
large value, the phenomenon known as integrator windup.
Implementing the integrator anti-windup circuit turns off the
integrator action when the actuator saturates, hence improving the
performance of the SAPF and dynamically compensating harmonics
in the power network. In this paper the system performance is
examined with Shunt Active Power Filter simulation model.
Abstract: In this paper bi-annual time series data on unemployment rates (from the Labour Force Survey) are expanded to quarterly rates and linked to quarterly unemployment rates (from the Quarterly Labour Force Survey). The resultant linked series and the consumer price index (CPI) series are examined using Johansen’s cointegration approach and vector error correction modeling. The study finds that both the series are integrated of order one and are cointegrated. A statistically significant co-integrating relationship is found to exist between the time series of unemployment rates and the CPI. Given this significant relationship, the study models this relationship using Vector Error Correction Models (VECM), one with a restriction on the deterministic term and the other with no restriction.
A formal statistical confirmation of the existence of a unique linear and lagged relationship between inflation and unemployment for the period between September 2000 and June 2011 is presented. For the given period, the CPI was found to be an unbiased predictor of the unemployment rate. This relationship can be explored further for the development of appropriate forecasting models incorporating other study variables.
Abstract: Adhesively bonded joints are preferred over the
conventional methods of joining such as riveting, welding, bolting
and soldering. Some of the main advantages of adhesive joints
compared to conventional joints are the ability to join dissimilar
materials and damage-sensitive materials, better stress distribution,
weight reduction, fabrication of complicated shapes, excellent
thermal and insulation properties, vibration response and enhanced
damping control, smoother aerodynamic surfaces and an
improvement in corrosion and fatigue resistance. This paper presents
the behavior of adhesively bonded joints subjected to combined
thermal loadings, using the numerical methods. The joint
configuration considers aluminum as central adherend with six
different outer adherends including aluminum, steel, titanium, boronepoxy,
unidirectional graphite-epoxy and cross-ply graphite-epoxy
and epoxy-based adhesives. Free expansion of the joint in x
direction was permitted and stresses in adhesive layer and interfaces
calculated for different adherends.
Abstract: Phishing, or stealing of sensitive information on the
web, has dealt a major blow to Internet Security in recent times. Most
of the existing anti-phishing solutions fail to handle the fuzziness
involved in phish detection, thus leading to a large number of false
positives. This fuzziness is attributed to the use of highly flexible and
at the same time, highly ambiguous HTML language. We introduce a
new perspective against phishing, that tries to systematically prove,
whether a given page is phished or not, using the corresponding
original page as the basis of the comparison. It analyzes the layout of
the pages under consideration to determine the percentage distortion
between them, indicative of any form of malicious alteration. The
system design represents an intelligent system, employing dynamic
assessment which accurately identifies brand new phishing attacks
and will prove effective in reducing the number of false positives.
This framework could potentially be used as a knowledge base, in
educating the internet users against phishing.
Abstract: The phenomenon of global warming or climate
change has led to many environmental issues including higher
atmospheric temperatures, intense precipitation, increased
greenhouse gaseous emissions and increased indoor discomfort.
Studies have shown that bringing nature to the roof such as
constructing green roof and implementing high-reflective roof may
give positive impact in mitigating the effects of global warming and
in increasing thermal comfort sensation inside buildings. However,
no study has been conducted to compare both types of passive roof
treatments in Malaysia in order to increase thermal comfort in
buildings. Therefore, this study is conducted to investigate the effect
of green roof and white painted roof as passive roof treatment in
improving indoor comfort of Malaysian homes. This study uses an
experimental approach in which the measurements of temperatures
are conducted on the case study building. The measurements of
outdoor and indoor environments were conducted on the flat roof
with two different types of roof treatment that are green roof and
white roof. The measurement of existing black bare roof was also
conducted to act as a control for this study.
Abstract: Prediction of bacterial virulent protein sequences can
give assistance to identification and characterization of novel
virulence-associated factors and discover drug/vaccine targets against
proteins indispensable to pathogenicity. Gene Ontology (GO)
annotation which describes functions of genes and gene products as a
controlled vocabulary of terms has been shown effectively for a
variety of tasks such as gene expression study, GO annotation
prediction, protein subcellular localization, etc. In this study, we
propose a sequence-based method Virulent-GO by mining informative
GO terms as features for predicting bacterial virulent proteins.
Each protein in the datasets used by the existing method
VirulentPred is annotated by using BLAST to obtain its homologies
with known accession numbers for retrieving GO terms. After
investigating various popular classifiers using the same five-fold
cross-validation scheme, Virulent-GO using the single kind of GO
term features with an accuracy of 82.5% is slightly better than
VirulentPred with 81.8% using five kinds of sequence-based features.
For the evaluation of independent test, Virulent-GO also yields better
results (82.0%) than VirulentPred (80.7%). When evaluating single
kind of feature with SVM, the GO term feature performs much well,
compared with each of the five kinds of features.
Abstract: The term private equity usually refers to any type of
equity investment in an asset in which the equity is not freely
tradable on a public stock market. Some researchers believe that
private equity contributed to the extent of the crisis and increased
the pace of its spread over the world. We do not agree with this.
On the other hand, we argue that during the economic recession
private equity might become an important source of funds for firms
with special needs (e.g. for firms seeking buyout financing, venture
capital, expansion capital or distress debt financing). However,
over-regulation of private equity in both the European Union and
the US can slow down this specific funding channel to the
economy and deepen credit crunch during global crises.
Abstract: Biofuels, like biobutanol, have been recognized for
being renewable and sustainable fuels which can be produced from
lignocellulosic biomass. To convert lignocellulosic biomass to
biofuel, pretreatment process is an important step to remove
hemicelluloses and lignin to improve enzymatic hydrolysis. Dilute
acid pretreatment has been successful developed for pretreatment of
corncobs and the optimum conditions of dilute sulfuric and
phosphoric acid pretreatment were obtained at 120 °C for 5 min with
15:1 liquid to solid ratio and 140 °C for 10 min with 10:1 liquid to
solid ratio, respectively. The result shows that both of acid
pretreatments gave the content of total sugar approximately 34–35
g/l. In case of inhibitor content (furfural), phosphoric acid
pretreatment gives higher than sulfuric acid pretreatment.
Characterizations of corncobs after pretreatment indicate that both of
acid pretreatments can improve enzymatic accessibility and the better
results present in corncobs pretreated with sulfuric acid in term of
surface area, crystallinity, and composition analysis.
Abstract: This study proposes a conceptual model and
empirically tests the relationships between customers and librarians
(i.e. tangibles, responsiveness, assurance, reliability and empathy)
with a dependent variable (customer satisfaction) regarding library
services. The SERVQUAL instrument was administered to 100
respondents which comprises of staff and students at a public higher
learning institution in the Federal Territory of Labuan, Malaysia.
They were public university library users. Results revealed that all
service quality dimensions tested were significant and influenced
customer satisfaction of visitors to a public university library.
Assurance is the most important factor that influences customer
satisfaction with the services rendered by the librarian. It is
imperative for the library management to take note that the top five
service attributes that gained greatest attention from library visitors-
perspective includes employee willingness to help customers,
availability of customer representatives online for response to
queries, library staff actively and promptly provide services, signs in
the building are clear and library staff are friendly and courteous.
This study provides valuable results concerning the determinants of
the service quality and customer satisfaction of public university
library services from the users' perspective.
Abstract: Fermented cassava flours (lafun) sold in Ogun and Oyo
States of Nigeria were collected from 10 markets for a period of two
months and analysed to determine their safety status. The presence of
trace metals was due to high vehicular movement around the drying
sites and markets. Cyanide and moisture contents of samples were
also determined to assess the adequacy of fermentation and drying.
The result showed that sample OWO was found to have the highest
amount of 16.02±0.12mg/kg cyanide while the lowest was found in
sample OJO with 10.51±0.10mg/kg. The results also indicated that
sample TVE had the highest moisture content of 18.50±0.20% while
sample OWO had the lowest amount of 12.46±0.47%. Copper and
lead levels were found to be highest in TVE with values 28.10mg/kg
and 1.1mg/kg respectively, while sample BTS had the lowest values
of 20.6mg/kg and 0.05mg/kg respectively. High value of cyanide
indicated inadequate fermentation.
Abstract: This paper presents a computational methodology
based on matrix operations for a computer based solution to the
problem of performance analysis of software reliability models
(SRMs). A set of seven comparison criteria have been formulated to
rank various non-homogenous Poisson process software reliability
models proposed during the past 30 years to estimate software
reliability measures such as the number of remaining faults, software
failure rate, and software reliability. Selection of optimal SRM for
use in a particular case has been an area of interest for researchers in
the field of software reliability. Tools and techniques for software
reliability model selection found in the literature cannot be used with
high level of confidence as they use a limited number of model
selection criteria. A real data set of middle size software project from
published papers has been used for demonstration of matrix method.
The result of this study will be a ranking of SRMs based on the
Permanent value of the criteria matrix formed for each model based
on the comparison criteria. The software reliability model with
highest value of the Permanent is ranked at number – 1 and so on.
Abstract: Most routing protocols (DSR, AODV etc.) that have
been designed for wireless adhoc networks incorporate the broadcasting
operation in their route discovery scheme. Probabilistic broadcasting
techniques have been developed to optimize the broadcast operation
which is otherwise very expensive in terms of the redundancy
and the traffic it generates. In this paper we have explored percolation
theory to gain a different perspective on probabilistic broadcasting
schemes which have been actively researched in the recent years.
This theory has helped us estimate the value of broadcast probability
in a wireless adhoc network as a function of the size of the network.
We also show that, operating at those optimal values of broadcast
probability there is at least 25-30% reduction in packet regeneration
during successful broadcasting.
Abstract: The purpose of this study is to present a non invasive
method for the marginal adaptation evaluation in class V composite
restorations. Standardized class V cavities, prepared in human
extracted teeth, were filled with Premise (Kerr) composite. The
specimens were thermo cycled. The interfaces were examined by
Optical Coherence Tomography method (OCT) combined with the
confocal microscopy and fluorescence. The optical configuration
uses two single mode directional couplers with a superluminiscent
diode as the source at 1300 nm. The scanning procedure is similar to
that used in any confocal microscope, where the fast scanning is enface
(line rate) and the depth scanning is much slower (at the frame
rate). Gaps at the interfaces as well as inside the composite resin
materials were identified. OCT has numerous advantages which
justify its use in vivo as well as in vitro in comparison with
conventional techniques.
Abstract: The output beam quality of multi transverse modes of
laser, are relatively poor. In order to obtain better beam quality, one
may use an aperture inside the laser resonator. In this case, various
transverse modes can be selected. We have selected various
transverse modes both by simulation and doing experiment. By
inserting a circular aperture inside the diode end-pumped Nd:YAG
pulsed laser resonator, we have obtained 00 TEM , 01 TEM
, 20 TEM and have studied which parameters, can change the mode
shape. Then, we have determined the beam quality factor of TEM00
gaussian mode.