Abstract: We study the semiconvergence of Gauss-Seidel iterative
methods for the least squares solution of minimal norm of rank
deficient linear systems of equations. Necessary and sufficient conditions
for the semiconvergence of the Gauss-Seidel iterative method
are given. We also show that if the linear system of equations is
consistent, then the proposed methods with a zero vector as an initial
guess converge in one iteration. Some numerical results are given to
illustrate the theoretical results.
Abstract: Alkali Activated Slag Concrete (AASC) mixes are manufactured by activating ground granulated blast furnace slag (GGBFS) using sodium hydroxide and sodium silicate solutions. The aim of the present experimental research was to investigate the effect of increasing the dosages of sodium oxide (Na2O, in the range of 4 to 8%) and the activator modulus (Ms) (i.e. the SiO2/Na2O ratio, in the range of 0.5 to 1.5) of the alkaline solutions, on the workability and strength characteristics of self-cured (air-cured) alkali activated Indian slag concrete mixes. Further the split tensile and flexure strengths for optimal mixes were studied for each dosage of Na2O.It is observed that increase in Na2O concentration increases the compressive, split-tensile and flexural strengths, both at the early and later-ages, while increase in Ms, decreases the workability of the mixes. An optimal Ms of 1.25 is found at various Na2O dosages. No significant differences in the strength performances were observed between AASCs manufactured with alkali solutions prepared using either of potable and de-ionized water.
Abstract: Green Roofs offers numerous advantages, including lowering ambient temperature, which is of increasing interest due to global warming concerns. However, there are technical problems pertaining to waterproofing to be resolved. Currently, the only recognized green roof waterproofing test is the German standard FLL. This paper examines the potential of replicating the test in tropical climate and reducing the test duration by using pre-grown plants. A three year old sample and a new setup were used for this experimental study. The new setup was prepared with close reference to the FLL standards and was compared against the three year old sample. Results showed that the waterproofing membrane was damaged by plant roots in both setups. Joints integrity was also challenged.
Abstract: The development of wearable sensing technologies is a great challenge which is being addressed by the Proetex FP6 project (www.proetex.org). Its main aim is the development of wearable sensors to improve the safety and efficiency of emergency personnel. This will be achieved by continuous, real-time monitoring of vital signs, posture, activity, and external hazards surrounding emergency workers. We report here the development of carbon dioxide (CO2) sensing boot by incorporating commercially available CO2 sensor with a wireless platform into the boot assembly. Carefully selected commercially available sensors have been tested. Some of the key characteristics of the selected sensors are high selectivity and sensitivity, robustness and the power demand. This paper discusses some of the results of CO2 sensor tests and sensor integration with wireless data transmission
Abstract: Optimum communication and performance in
Wireless Sensor Networks, constitute multi-facet challenges due to
the specific networking characteristics as well as the scarce resource
availability. Furthermore, it is becoming increasingly apparent that
isolated layer based approaches often do not meet the demands posed
by WSNs applications due to omission of critical inter-layer
interactions and dependencies. As a counterpart, cross-layer is
receiving high interest aiming to exploit these interactions and
increase network performance. However, in order to clearly identify
existing dependencies, comprehensive performance studies are
required evaluating the effect of different critical network parameters
on system level performance and behavior.This paper-s main
objective is to address the need for multi-parametric performance
evaluations considering critical network parameters using a well
known network simulator, offering useful and practical conclusions
and guidelines. The results reveal strong dependencies among
considered parameters which can be utilized by and drive future
research efforts, towards designing and implementing highly efficient
protocols and architectures.
Abstract: Occurrences of spurious crests on the troughs of large,
relatively steep second-order Stokes waves are anomalous and not an
inherent characteristic of real waves. Here, the effects of such
occurrences on the statistics described by the standard second-order
stochastic model are examined theoretically and by way of
simulations. Theoretical results and simulations indicate that when
spurious occurrences are sufficiently large, the standard model leads
to physically unrealistic surface features and inaccuracies in the
statistics of various surface features, in particular, the troughs and
thus zero-crossing heights of large waves. Whereas inaccuracies can
be fairly noticeable for long-crested waves in both deep and
shallower depths, they tend to become relatively insignificant in
directional waves.
Abstract: In the context of large volume Big Divisor (nearly)
SLagy D3/D7 μ-Split SUSY [1], after an explicit identification
of first generation of SM leptons and quarks with fermionic superpartners
of four Wilson line moduli, we discuss the identification of
gravitino as a potential dark matter candidate by explicitly calculating
the decay life times of gravitino (LSP) to be greater than age of
universe and lifetimes of decays of the co-NLSPs (the first generation
squark/slepton and a neutralino) to the LSP (the gravitino) to be
very small to respect BBN constraints. Interested in non-thermal
production mechanism of gravitino, we evaluate the relic abundance
of gravitino LSP in terms of that of the co-NLSP-s by evaluating
their (co-)annihilation cross sections and hence show that the former
satisfies the requirement for a potential Dark Matter candidate. We
also show that it is possible to obtain a 125 GeV light Higgs in our
setup.
Abstract: Artificial Immune System (AIS) is relatively naive paradigm for intelligent computations. The inspiration for AIS is derived from natural Immune System (IS). Classically it is believed that IS strives to discriminate between self and non-self. Most of the existing AIS research is based on this approach. Danger Theory (DT) argues this approach and proposes that IS fights against danger producing elements and tolerates others. We, the computational researchers, are not concerned with the arguments among immunologists but try to extract from it novel abstractions for intelligent computation. This paper aims to follow DT inspiration for intelligent data processing. The approach may introduce new avenue in intelligent processing. The data used is system calls data that is potentially significant in intrusion detection applications.
Abstract: DC-DC converters are widely used in regulated switched mode power supplies and in DC motor drive applications. There are several sources of unwanted nonlinearity in practical power converters. In addition, their operation is characterized by switching that gives birth to a variety of nonlinear dynamics. DC-DC buck and boost converters controlled by pulse-width modulation (PWM) have been simulated. The voltage waveforms and attractors obtained from the circuit simulation have been studied. With the onset of instability, the phenomenon of subharmonic oscillations, quasi-periodicity, bifurcations, and chaos have been observed. This paper is mainly motivated by potential contributions of chaos theory in the design, analysis and control of power converters, in particular and power electronics circuits, in general.
Abstract: The dynamics of the Autonomous Underwater
Vehicles (AUVs) are highly nonlinear and time varying and the hydrodynamic coefficients of vehicles are difficult to estimate
accurately because of the variations of these coefficients with
different navigation conditions and external disturbances. This study presents the on-line system identification of AUV dynamics to obtain
the coupled nonlinear dynamic model of AUV as a black box. This black box has an input-output relationship based upon on-line
adaptive fuzzy model and adaptive neural fuzzy network (ANFN)
model techniques to overcome the uncertain external disturbance and
the difficulties of modelling the hydrodynamic forces of the AUVs instead of using the mathematical model with hydrodynamic parameters estimation. The models- parameters are adapted according
to the back propagation algorithm based upon the error between the
identified model and the actual output of the plant. The proposed
ANFN model adopts a functional link neural network (FLNN) as the
consequent part of the fuzzy rules. Thus, the consequent part of the
ANFN model is a nonlinear combination of input variables. Fuzzy
control system is applied to guide and control the AUV using both
adaptive models and mathematical model. Simulation results show
the superiority of the proposed adaptive neural fuzzy network
(ANFN) model in tracking of the behavior of the AUV accurately
even in the presence of noise and disturbance.
Abstract: XML is a markup language which is becoming the
standard format for information representation and data exchange. A
major purpose of XML is the explicit representation of the logical
structure of a document. Much research has been performed to
exploit logical structure of documents in information retrieval in
order to precisely extract user information need from large
collections of XML documents. In this paper, we describe an XML
information retrieval weighting scheme that tries to find the most
relevant elements in XML documents in response to a user query.
We present this weighting model for information retrieval systems
that utilize plausible inferences to infer the relevance of elements in
XML documents. We also add to this model the Dempster-Shafer
theory of evidence to express the uncertainty in plausible inferences
and Dempster-Shafer rule of combination to combine evidences
derived from different inferences.
Abstract: This paper presents an adaptive nonlinear position
controller with velocity constraint, capable of combining the
input-output linearization technique and Lyapunov stability theory.
Based on the Lyapunov stability theory, the adaptation law of the
proposed controller is derived along with the verification of the overall
system-s stability. Computer simulation results demonstrate that the
proposed controller is robust and it can ensure transient stability of
BLDCM, under the occurrence of a large sudden fault.
Abstract: In this paper, a new model order reduction
phenomenon is introduced at the design stage of linear phase digital
IIR filter. The complexity of a system can be reduced by adopting the
model order reduction method in their design. In this paper a mixed
method of model order reduction is proposed for linear IIR filter. The
proposed method employs the advantages of factor division technique
to derive the reduced order denominator polynomial and the reduced
order numerator is obtained based on the resultant denominator
polynomial. The order reduction technique is used to reduce the delay
units at the design stage of IIR filter. The validity of the proposed
method is illustrated with design example in frequency domain and
stability is also examined with help of nyquist plot.
Abstract: This paper presented a collaborative education model,
which consists four parts: collaborative teaching, collaborative
working, collaborative training and interaction. Supported by an
e-learning platform, collaborative education was practiced in a data
structure e-learning course. Data collected shows that most of students
accept collaborative education. This paper goes one step attempting to
determine which aspects appear to be most important or helpful in
collaborative education.
Abstract: Financial forecasting using machine learning techniques has received great efforts in the last decide . In this ongoing work, we show how machine learning of graphical models will be able to infer a visualized causal interactions between different banks in the Saudi equities market. One important discovery from such learned causal graphs is how companies influence each other and to what extend. In this work, a set of graphical models named Gaussian graphical models with developed ensemble penalized feature selection methods that combine ; filtering method, wrapper method and a regularizer will be shown. A comparison between these different developed ensemble combinations will also be shown. The best ensemble method will be used to infer the causal relationships between banks in Saudi equities market.
Abstract: People usually have a telephone voice, which means
they adjust their speech to fit particular situations and to blend in with
other interlocutors. The question is: Do we speak differently to
different people? This possibility has been suggested by social
psychologists within Accommodation Theory [1]. Converging toward
the speech of another person can be regarded as a polite speech
strategy while choosing a language not used by the other interlocutor
can be considered as the clearest example of speech divergence [2].
The present study sets out to investigate such processes in the course
of everyday telephone conversations. Using Joos-s [3] model of
formality in spoken English, the researchers try to explore
convergence to or divergence from the addressee. The results
propound the actuality that lexical choice, and subsequently, patterns
of style vary intriguingly in concordance with the person being
addressed.
Abstract: In rotating machinery one of the critical components
that is prone to premature failure is the rolling bearing.
Consequently, early warning of an imminent bearing failure is much
critical to the safety and reliability of any high speed rotating
machines. This study is concerned with the application of Recurrence
Quantification Analysis (RQA) in fault detection of rolling element
bearings in rotating machinery. Based on the results from this study it
is reported that the RQA variable, percent determinism, is sensitive
to the type of fault investigated and therefore can provide useful
information on bearing damage in rolling element bearings.
Abstract: The aim of this study was to establish the feasibility of a minute incremental exercise testing protocol in young asthma children. Twenty-two children with clinically diagnosed mild to moderate asthma volunteered to participate. The maximum incremental exercise test was performed using a cycle ergometer with an electromagnetic braking. A warm-up unloaded for 2 minutes then the workload was started at 40 watts for 2 minutes, and then stepwise increments of 8 watts per 2 minutes were applied. The pedaling frequency was set at 50 rpm. Ventilation and gas exchange were measured with a breath-by-breath automatic metabolic measurement system. Results showed that this test was well tolerated by all asthmatic children. Most of the children reached the VO2 plateau and satisfied the criteria for maximal respiratory exchange ratio of ≥ 1. This Study demonstrated that this testing protocol was suitable for young asthmatic children.
Abstract: Although the STL (stereo lithography) file format is
widely used as a de facto industry standard in the rapid prototyping
industry due to its simplicity and ability to tessellation of almost all
surfaces, but there are always some defects and shortcoming in their
usage, which many of them are difficult to correct manually. In
processing the complex models, size of the file and its defects grow
extremely, therefore, correcting STL files become difficult. In this
paper through optimizing the exiting algorithms, size of the files and
memory usage of computers to process them will be reduced. In spite
of type and extent of the errors in STL files, the tail-to-head
searching method and analysis of the nearest distance between tails
and heads techniques were used. As a result STL models sliced
rapidly, and fully closed contours produced effectively and errorless.