Abstract: There are few studies on eggshell of leatherback turtle
which is endangered species in Thailand. This study was focusing on
the ultrastructure and elemental composition of leatherback turtle
eggshells collected from Andaman Sea Shore, Thailand during the
nesting season using scanning electron microscope (SEM). Three
eggshell layers of leatherback turtle; the outer cuticle layer or
calcareous layer, the middle layer or middle multistrata layer and the
inner fibrous layer were recognized. The outer calcareous layer was
thick and porosity which consisted of loose nodular units of various
crystal shapes and sizes. The loose attachment between these units
resulted in numerous spaces and openings. The middle layer was
compact thick with several multistrata and contained numerous
openings connecting to both outer cuticle layer and inner fibrous
layer. The inner fibrous layer was compact and thin, and composed of
numerous reticular fibers. Energy dispersive X-ray microanalysis
detector revealed energy spectrum of X-rays character emitted from
all elements on each layer. The percentages of all elements were
found in the following order: carbon (C) > oxygen (O) > calcium
(Ca) > sulfur (S) > potassium (K) > aluminum (Al) > iodine (I) >
silicon (Si) > chlorine (Cl) > sodium (Na) > fluorine (F) >
phosphorus (P) > magnesium (Mg). Each layer consisted of high
percentage of CaCO3 (approximately 98%) implying that it was
essential for turtle embryonic development. A significant difference
was found in the percentages of Ca and Mo in the 3layers. Moreover,
transition metal, metal and toxic non-metal contaminations were
found in leatherback turtle eggshell samples. These were palladium
(Pd), molybdenum (Mo), copper (Cu), aluminum (Al), lead (Pb), and
bromine (Br). The contamination elements were seen in the outer
layers except for Mo. All elements were readily observed and
mapped using Smiling program. X-ray images which mapped the
location of all elements were showed. Calcium containing in the
eggshell appeared in high contents and was widely distributing in
clusters of the outer cuticle layer to form CaCO3 structure. Moreover,
the accumulation of Na and Cl was observed to form NaCl which was
widely distributing in 3 eggshell layers. The results from this study
would be valuable on assessing the emergent success in this
endangered species.
Abstract: When designing information systems that deal with
large amount of domain knowledge, system designers need to consider
ambiguities of labeling termsin domain vocabulary for navigating
users in the information space. The goal of this study is to develop a
methodology for system designers to label navigation items, taking
account of ambiguities stems from synonyms or polysemes of labeling
terms. In this paper, we propose a method for concept labeling based
on mappings between domain ontology andthesaurus, and report
results of an empirical evaluation.
Abstract: A straightforward and intuitive combination of single simulations into an aggregated master-simulation is not trivial. There are lots of problems, which trigger-specific difficulties during the modeling and execution of such a simulation. In this paper we identify these problems and aim to solve them by mapping the task to the field of multi agent systems. The solution is a new meta-model named AGENTMAP, which is able to mitigate most of the problems and to support intuitive modeling at the same time. This meta-model will be introduced and explained on basis of an example from the e-commerce domain.
Abstract: POS (also been called DGPS/IMU) technique can obtain the Exterior Orientation Elements of aerial photo, so the triangulation and DLG production using POS can save large numbers of ground control points (GCP), and this will improve the produce efficiency of DLG and reduce the cost of collecting GCP. This paper mainly research on POS technique in production of 1:10 000 scale DLG on GCP distribution. We designed 23 kinds of ground control points distribution schemes, using integrated sensor direction method to do the triangulation experiments, based on the results of triangulation, we produce a map with the scale of 1:10 000 and test its accuracy. This paper put forward appropriate GCP distributing schemes by experiments and research above, and made preparations for the application of POS technique on photogrammetry 4D data production.
Abstract: In distributed resource allocation a set of agents must assign their resources to a set of tasks. This problem arises in many real-world domains such as distributed sensor networks, disaster rescue, hospital scheduling and others. Despite the variety of approaches proposed for distributed resource allocation, a systematic formalization of the problem, explaining the different sources of difficulties, and a formal explanation of the strengths and limitations of key approaches is missing. We take a step towards this goal by using a formalization of distributed resource allocation that represents both dynamic and distributed aspects of the problem. In this paper we present a new idea for target tracking in sensor networks and compare it with previous approaches. The central contribution of the paper is a generalized mapping from distributed resource allocation to DDCSP. This mapping is proven to correctly perform resource allocation problems of specific difficulty. This theoretical result is verified in practice by a simulation on a realworld distributed sensor network.
Abstract: Field mapping activity for an active volcano mainly in
the Torrid Zone is usually hampered by several problems such as steep
terrain and bad atmosphere conditions. In this paper we present a
simple solution for such problem by a combination Synthetic Aperture
Radar (SAR) and geostatistical methods. By this combination, we
could reduce the speckle effect from the SAR data and then estimate
roughness distribution of the pyroclastic flow deposits. The main
purpose of this study is to detect spatial distribution of new pyroclastic
flow deposits termed as P-zone accurately using the β°data from two
RADARSAT-1 SAR level-0 data. Single scene of Hyperion data and
field observation were used for cross-validation of the SAR results.
Mt. Merapi in central Java, Indonesia, was chosen as a study site and
the eruptions in May-June 2006 were examined. The P-zones were
found in the western and southern flanks. The area size and the longest
flow distance were calculated as 2.3 km2 and 6.8 km, respectively. The
grain size variation of the P-zone was mapped in detail from fine to
coarse deposits regarding the C-band wavelength of 5.6 cm.
Abstract: In this paper, the noise maps for the area encircled by
the Second Ring Road in Riyadh city are developed based on real
measured data. Sound level meters, GPS receivers to determine
measurement position, a database program to manage the measured
data, and a program to develop the maps are used. A baseline noise
level has been established at each short-term site so subsequent
monitoring may be conducted to describe changes in Riyadh-s noise
environment. Short-term sites are used to show typical daytime and
nighttime noise levels at specific locations by short duration grab
sampling.
Abstract: The need to evaluate and understand the natural
drainage pattern in a flood prone, and fast developing environment is
of paramount importance. This information will go a long way to
help the town planners to determine the drainage pattern, road
networks and areas where prominent structures are to be located. This
research work was carried out with the aim of studying the Bayelsa
landscape topography using digitized topographic information, and to
model the natural drainage flow pattern that will aid the
understanding and constructions of workable drainages. To achieve
this, digitize information of elevation and coordinate points were
extracted from a global imagery map. The extracted information was
modeled into 3D surfaces. The result revealed that the average
elevation for Bayelsa State is 12 m above sea level. The highest
elevation is 28 m, and the lowest elevation 0 m, along the coastline.
In Yenagoa the capital city of Bayelsa were a detail survey was
carried out showed that average elevation is 15 m, the highest
elevation is 25 m and lowest is 3 m above the mean sea level. The
regional elevation in Bayelsa, showed a gradation decrease from the
North Eastern zone to the South Western Zone. Yenagoa showed an
observed elevation lineament, were low depression is flanked by high
elevation that runs from the North East to the South west. Hence,
future drainages in Yenagoa should be directed from the high
elevation, from South East toward the North West and from the
North West toward South East, to the point of convergence which is
at the center that flows from South East toward the North West.
Bayelsa when considered on a regional Scale, the flow pattern is from
the North East to the South West, and also North South. It is
recommended that in the event of any large drainage construction at
municipal scale, it should be directed from North East to the South
West or from North to South. Secondly, detail survey should be
carried out to ascertain the local topography and the drainage pattern
before the design and construction of any drainage system in any part
of Bayelsa.
Abstract: In working mode some unexpected changes could
be arise in inner structure of electromagnetic device. They
influence modification in electromagnetic field propagation map.
The field values at an observed boundary are also changed. The
development of the process has to be watched because the arising
structural changes would provoke the device to be gone out later.
The probabilistic assessment of the state is possible to be made.
The numerical assessment points if the resulting changes have
only accidental character or they are due to the essential inner
structural disturbances.
The presented application example is referring to the 200MW
turbine-generator. A part of the stator core end teeth zone is
simulated broken. Quasi three-dimensional electromagnetic and
temperature field are solved applying FEM. The stator core state
diagnosis is proposed to be solved as an identification problem on
the basis of a statistical criterion.
Abstract: Mobile IPv6 (MIPv6) describes how mobile node can change its point of attachment from one access router to another. As a demand for wireless mobile devices increases, many enhancements for macro-mobility (inter-domain) protocols have been proposed, designed and implemented in Mobile IPv6. Hierarchical Mobile IPv6 (HMIPv6) is one of them that is designed to reduce the amount of signaling required and to improve handover speed for mobile connections. This is achieved by introducing a new network entity called Mobility Anchor Point (MAP). This report presents a comparative study of the Hierarchical Mobility IPv6 and Mobile IPv6 protocols and we have narrowed down the scope to micro-mobility (intra-domain). The architecture and operation of each protocol is studied and they are evaluated based on the Quality of Service (QoS) parameter; handover latency. The simulation was carried out by using the Network Simulator-2. The outcome from this simulation has been discussed. From the results, it shows that, HMIPv6 performs best under intra-domain mobility compared to MIPv6. The MIPv6 suffers large handover latency. As enhancement we proposed to HMIPv6 to locate the MAP to be in the middle of the domain with respect to all Access Routers. That gives approximately same distance between MAP and Mobile Node (MN) regardless of the new location of MN, and possible shorter distance. This will reduce the delay since the distance is shorter. As a future work performance analysis is to be carried for the proposed HMIPv6 and compared to HMIPv6.
Abstract: Wheat gluten hydrolyzates (WGHs) and anchovy fine
powder hydrolyzates (AFPHs) were produced at 300 MPa using
combinations of Flavourzyme 500MG (F), Alcalase 2.4L (A),
Marugoto E (M) and Protamex (P), and then were compared to those
produced at ambient pressure concerning the contents of soluble solid
(SS), soluble nitrogen and electrophoretic profiles. The contents of SS
in the WGHs and AFPHs increased up to 87.2% according to the
increase in enzyme number both at high and ambient pressure. Based
on SS content, the optimum enzyme combinations for one-, two-,
three- and four-enzyme hydrolysis were determined as F, FA, FAM
and FAMP, respectively. Similar trends were found for the contents of
total soluble nitrogen (TSN) and TCA-soluble nitrogen (TCASN). The
contents of SS, TSN and TCASN in the hydrolyzates together with
electrophoretic mobility maps indicates that the high-pressure
treatment of this study accelerated protein hydrolysis compared to
ambient-pressure treatment.
Abstract: The turbulent mixing of coolant streams of different
temperature and density can cause severe temperature fluctuations in
piping systems in nuclear reactors. In certain periodic contraction
cycles these conditions lead to thermal fatigue. The resulting aging
effect prompts investigation in how the mixing of flows over a sharp
temperature/density interface evolves. To study the fundamental
turbulent mixing phenomena in the presence of density gradients,
isokinetic (shear-free) mixing experiments are performed in a square
channel with Reynolds numbers ranging from 2-500 to 60-000.
Sucrose is used to create the density difference. A Wire Mesh Sensor
(WMS) is used to determine the concentration map of the flow in the
cross section. The mean interface width as a function of velocity,
density difference and distance from the mixing point are analyzed
based on traditional methods chosen for the purposes of
atmospheric/oceanic stratification analyses. A definition of the
mixing layer thickness more appropriate to thermal fatigue and based
on mixedness is devised. This definition shows that the thermal
fatigue risk assessed using simple mixing layer growth can be
misleading and why an approach that separates the effects of large
scale (turbulent) and small scale (molecular) mixing is necessary.
Abstract: Developing countries are facing a problem of slums and there appears to be no fool proof solution to eradicate them. For improving the quality of life there are three approaches of slum development and In-situ up-gradation approach is found to be the best one, while the relocation approach has proved to be failure. Factors responsible for failure of relocation projects are needed to be assessed, which is the basic aim of the paper. Factors responsible for failure of relocation projects are loss of livelihood, security of tenure and inefficiency of the Government. These factors are traced out & mapped from the examples of Western & Indian cities. National habitat, Resettlement policy emphasized relationship between shelter and work place. SRA has identified 55 slums for relocation due reservation of land uses, security of tenure and non- notified status of slums. The policy guidelines have been suggested for successful relocation projects. KeywordsLivelihood, Relocation, Slums, Urban poor.
Abstract: Given the motivation of maps impact in enhancing the
perception of the quality of life in a region, this work examines the
use of spatial analytical techniques in exploring the role of space in
shaping human development patterns in Assiut governorate.
Variations of human development index (HDI) of the governorate-s
villages, districts and cities are mapped using geographic information
systems (GIS). Global and local spatial autocorrelation measures are
employed to assess the levels of spatial dependency in the data and to
map clusters of human development. Results show prominent
disparities in HDI between regions of Assiut. Strong patterns of
spatial association were found proving the presence of clusters on the
distribution of HDI. Finally, the study indicates several "hot-spots" in
the governorate to be area of more investigations to explore the
attributes of such levels of human development. This is very
important for accomplishing the development plan of poorest regions
currently adopted in Egypt.
Abstract: Although in sustainable development field, innovative
solutions have been sought worldwide by environmental groups,
academia, governments and companies for many years, recently,
citizens and communities have emerged as a new group and taken
more and more active role in this field. Many scholars call for more
research on the role of community and community innovation in
sustainable development. This paper is to respond to the calls. In
this paper, we first summarize a comprehensive set of innovation
principles. Then, we do a qualitative cross case study by comparing
three community innovation cases in three different areas of sustainable
development according to the innovation principles. Finally,
we summarize the case comparison and discuss the implications
to sustainable development. A unified role model and innovation
distribution map of community innovation are developed to better
understand community innovation in sustainable development..
Abstract: Artifact rejection plays a key role in many signal processing applications. The artifacts are disturbance that can occur during the signal acquisition and that can alter the analysis of the signals themselves. Our aim is to automatically remove the artifacts, in particular from the Electroencephalographic (EEG) recordings. A technique for the automatic artifact rejection, based on the Independent Component Analysis (ICA) for the artifact extraction and on some high order statistics such as kurtosis and Shannon-s entropy, was proposed some years ago in literature. In this paper we try to enhance this technique proposing a new method based on the Renyi-s entropy. The performance of our method was tested and compared to the performance of the method in literature and the former proved to outperform the latter.
Abstract: In image processing and visualization, comparing two
bitmapped images needs to be compared from their pixels by matching
pixel-by-pixel. Consequently, it takes a lot of computational time
while the comparison of two vector-based images is significantly
faster. Sometimes these raster graphics images can be approximately
converted into the vector-based images by various techniques. After
conversion, the problem of comparing two raster graphics images
can be reduced to the problem of comparing vector graphics images.
Hence, the problem of comparing pixel-by-pixel can be reduced to
the problem of polynomial comparisons. In computer aided geometric
design (CAGD), the vector graphics images are the composition of
curves and surfaces. Curves are defined by a sequence of control
points and their polynomials. In this paper, the control points will be
considerably used to compare curves. The same curves after relocated
or rotated are treated to be equivalent while two curves after different
scaled are considered to be similar curves. This paper proposed an
algorithm for comparing the polynomial curves by using the control
points for equivalence and similarity. In addition, the geometric
object-oriented database used to keep the curve information has also
been defined in XML format for further used in curve comparisons.
Abstract: The research study evaluated the performance of
irrigation system by using special scientific tools like Remote
Sensing and GIS technology, so that proper measurements could be
taken for the sustainable agriculture and water management.
Different performance evaluation parameters had been calculated for
the purposed data was gathered from field investigation and different
government and private organizations. According to the calculations,
organic matter ranges from 0.19% (low value) to 0.76% (high value).
In flat irrigation system for wheat yield ranges from 3347.16 to
5260.39 kg/ha, while the total water applied to wheat crop ranges
from 252.94 to 279.19 mm and WUE ranges from 13.07 to 18.37
kg/ha/mm. For rice yield ranges from 3347.47 to 5433.07 kg/ha with
total water supplied to rice crop ranges from 764.71 to 978.15 mm
and WUE ranges from 3.49 to 5.71 kg/ha/mm. Similarly, in raised
bed system wheat yield ranges from 4569.13 to 6008.60 kg/ha, total
water supplied ranges from 158.87 to 185.09 mm and WUE ranges
from 27.20 to 33.54 kg/ha/mm while in rice crop, yield ranges from
5285.04 to 6716.69 kg/ha, total water supplied ranges from 600.72 to
755.06 mm and WUE ranges from 6.41 to 10.05 kg/ha/mm. Almost
51.3% water saving is observed in bed irrigation system as compared
to flat system. Less water supplied to beds is more affective as its
WUE value is higher than flat system where more water is supplied
in both the seasons. Similarly, RWS values show that maximum
water deficit while minimum area is getting adequate water supply.
Greater yield is recorded in bed system as plant per square meter is
more in bed system in comparison of flat system Thus, the integration
of GIS tools to regularly compute performance indices could provide
irrigation managers with the means for managing efficiently the
irrigation system.
Abstract: The transformation of vocal characteristics aims at
modifying voice such that the intelligibility of aphonic voice is
increased or the voice characteristics of a speaker (source speaker) to
be perceived as if another speaker (target speaker) had uttered it. In
this paper, the current state-of-the-art voice characteristics
transformation methodology is reviewed. Special emphasis is placed
on voice transformation methodology and issues for improving the
transformed speech quality in intelligibility and naturalness are
discussed. In particular, it is suggested to use the modulation theory
of speech as a base for research on high quality voice transformation.
This approach allows one to separate linguistic, expressive, organic
and perspective information of speech, based on an analysis of how
they are fused when speech is produced. Therefore, this theory
provides the fundamentals not only for manipulating non-linguistic,
extra-/paralinguistic and intra-linguistic variables for voice
transformation, but also for paving the way for easily transposing the
existing voice transformation methods to emotion-related voice
quality transformation and speaking style transformation. From the
perspectives of human speech production and perception, the popular
voice transformation techniques are described and classified them
based on the underlying principles either from the speech production
or perception mechanisms or from both. In addition, the advantages
and limitations of voice transformation techniques and the
experimental manipulation of vocal cues are discussed through
examples from past and present research. Finally, a conclusion and
road map are pointed out for more natural voice transformation
algorithms in the future.
Abstract: This paper addresses the problem of building a unified
structure to describe a peer-to-peer system. Our approach uses the
well-known notations in the P2P area, and provides a global
architecture that puts a separation between the platform specific
characteristics and the logical ones. In order to enable the navigation
of the peer across platforms, a roaming layer is added. The latter
provides a capability to define a unique identification of peer and
assures the mapping between this identification and those used in
each platform. The mapping task is assured by special wrapper. In
addition, ontology is proposed to give a clear presentation of the
structure of the P2P system without interesting in the content and the
resource managed by the peer. The ontology is created according to
the web semantic paradigm and using OWL language; so, the
structure of the system is considered as a web resource.