Abstract: In vitro plant regeneration has been successfully obtained from basal shoot explant of Vetiveria zizanioides through indirect organogenesis. The explant was cultured in Murashige & Skoog’s (MS) media supplemented with 2,4-D, IAA, and kinetin in various concentrations. Callus was well induced in media supplemented with 2 ppm 2,4-D, 1 ppm IAA, and 1 ppm kinetin. This callus was then transferred to MS media supplemented with 1 - 5 ppm of BAP for shoot regeneration. The media supplemented with 3 ppm BAP was a suitable medium for shoot induction, as well as for shoot multiplication. Rooting was well developed in shoot following transferred to half MS media containing 0.2 ppm IBA. Plantlet was then transferred to husk charcoal for acclimatization, and almost all (90%) of plantlets were survived during acclimatization.
Abstract: With the proliferation of mobile computing technology, mobile learning (m-learning) will play a vital role in the rapidly growing electronic learning market. However, the acceptance of m-learning by individuals is critical to the successful implementation of m-learning systems. Thus, there is a need to research the factors that affect users- intention to use m-learning. Based on an updated information system (IS) success model, data collected from 350 respondents in Taiwan were tested against the research model using the structural equation modeling approach. The data collected by questionnaire were analyzed to check the validity of constructs. Then hypotheses describing the relationships between the identified constructs and users- satisfaction were formulated and tested.
Abstract: The increasingly sophisticated technologies have now been able to provide assistance for surgeons to improve surgical
performance through various training programs. Equally important to learning skills is the assessment method as it determines the learning and technical proficiency of a trainee. A consistent and
rigorous assessment system will ensure that trainees acquire the specific level of competency prior to certification. This paper
reviews the methods currently in use for assessment of surgical
skill and some modern techniques using computer-based
measurements and virtual reality systems for more quantitative
measurements
Abstract: This paper presents the development techniques
for a complete autonomous design model of an advanced train
control system and gives a new approach for the
implementation of multi-agents based system. This research
work proposes to develop a novel control system to enhance
the efficiency of the vehicles under constraints of various
conditions, and contributes in stability and controllability
issues, considering relevant safety and operational
requirements with command control communication and
various sensors to avoid accidents. The approach of speed
scheduling, management and control in local and distributed
environment is given to fulfill the dire needs of modern trend
and enhance the vehicles control systems in automation. These
techniques suggest the state of the art microelectronic
technology with accuracy and stability as forefront goals.
Abstract: Rapid prototyping (RP) techniques are a group of
advanced manufacturing processes that can produce custom made
objects directly from computer data such as Computer Aided Design
(CAD), Computed Tomography (CT) and Magnetic Resonance
Imaging (MRI) data. Using RP fabrication techniques, constructs
with controllable and complex internal architecture with appropriate
mechanical properties can be achieved. One of the attractive and
promising utilization of RP techniques is related to tissue engineering
(TE) scaffold fabrication. Tissue engineering scaffold is a 3D
construction that acts as a template for tissue regeneration. Although
several conventional techniques such as solvent casting and gas
forming are utilized in scaffold fabrication; these processes show
poor interconnectivity and uncontrollable porosity of the produced
scaffolds. So, RP techniques become the best alternative fabrication
methods of TE scaffolds. This paper reviews the current state of the
art in the area of tissue engineering scaffolds fabrication using
advanced RP processes, as well as the current limitations and future
trends in scaffold fabrication RP techniques.
Abstract: Today, biogenic magnetite nanoparticles among
magnetic nanoparticles have unique attracted attention because of
their magnetic characteristics and potential applications in various
fields such as therapeutic and diagnostic. A well known example of
these biogenic nanoparticles is magnetosomes of magnetotactic
bacteria. In this research, we used two different types of technique for
the isolation and purification of magnetosome nanoparticles from the
isolated magnetotactic bacterial cells, heat-alkaline treatment and
sonication. Also we evaluated pyrogen content and sterility of
synthesized the isolated individual magnetosome by the Limulus
Amoebocyte Lysate test and direct impedimetric method
respectively.
Abstract: This paper addresses the problems encountered by conventional distance relays when protecting double-circuit transmission lines. The problems arise principally as a result of the mutual coupling between the two circuits under different fault conditions; this mutual coupling is highly nonlinear in nature. An adaptive protection scheme is proposed for such lines based on application of artificial neural network (ANN). ANN has the ability to classify the nonlinear relationship between measured signals by identifying different patterns of the associated signals. One of the key points of the present work is that only current signals measured at local end have been used to detect and classify the faults in the double circuit transmission line with double end infeed. The adaptive protection scheme is tested under a specific fault type, but varying fault location, fault resistance, fault inception angle and with remote end infeed. An improved performance is experienced once the neural network is trained adequately, which performs precisely when faced with different system parameters and conditions. The entire test results clearly show that the fault is detected and classified within a quarter cycle; thus the proposed adaptive protection technique is well suited for double circuit transmission line fault detection & classification. Results of performance studies show that the proposed neural network-based module can improve the performance of conventional fault selection algorithms.
Abstract: An innovative approach utilizing highly alkaline oil
shale waste ash and carbon dioxide gas (CO2), associated with power
production, as a resource for production of precipitated calcium
carbonate (PCC) is introduced in this paper. The specifics and
feasibility of the integrated ash valorization and CO2 sequestration
process by indirect aqueous carbonation of lime-consisting ash were
elaborated and the main parameters established. Detailed description
of the formed precipitates was included. Complimentary carbonation
experiments with commercial CaO fine powder were conducted for
comparative characterization of the final products obtained on the
basis of two different raw materials. Finally, the expected CO2
uptake was evaluated.
Abstract: The objective of positioning the fixture elements in
the fixture is to make the workpiece stiff, so that geometric errors in
the manufacturing process can be reduced. Most of the work for
optimal fixture layout used the minimization of the sum of the nodal
deflection normal to the surface as objective function. All deflections
in other direction have been neglected. We propose a new method for
fixture layout optimization in this paper, which uses the element
strain energy. The deformations in all the directions have been
considered in this way. The objective function in this method is to
minimize the sum of square of element strain energy. Strain energy
and stiffness are inversely proportional to each other. The
optimization problem is solved by the sequential quadratic
programming method. Three different kinds of case studies are
presented, and results are compared with the method using nodal
deflections as objective function to verify the propose method.
Abstract: This paper examines the impact of information and
communication technology (ICT) usage, internal relationship,
supplier-retailer relationship, logistics services and inventory
management on convenience store suppliers- performance. Data was
collected from 275 convenience store managers in Malaysia using a
set of questionnaire. The multiple linear regression results indicate
that inventory management, supplier-retailer relationship, logistics
services and internal relationship are predictors of supplier
performance as perceived by convenience store managers. However,
ICT usage is not a predictor of supplier performance. The study
focuses only on convenience stores and petrol station convenience
stores and concentrates only on managers. The results provide
insights to suppliers who serve convenience stores and possibly
similar retail format on factors to consider in improving their service
to retailers. The results also provide insights to government in its
aspiration to improve business operations of convenience store to
consider ways to enhance the adoption of ICT by retailers and
suppliers.
Abstract: A wide spectrum of systems require reliable
personal recognition schemes to either confirm or determine the
identity of an individual person. This paper considers multimodal
biometric system and their applicability to access control,
authentication and security applications. Strategies for feature
extraction and sensor fusion are considered and contrasted. Issues
related to performance assessment, deployment and standardization
are discussed. Finally future directions of biometric systems
development are discussed.
Abstract: Laser soldering is based on applying some soldering material (albumin) onto the approximated edges of the cut and heating the solder (and the underlying tissues) by a laser beam. Endogenous and exogenous materials such as indocyanine green (ICG) are often added to solders to enhance light absorption. Gold nanoshells are new materials which have an optical response dictated by the plasmon resonance. The wavelength at which the resonance occurs depends on the core and shell sizes, allowing nanoshells to be tailored for particular applications. The purposes of this study was use combination of ICG and different concentration of gold nanoshells for skin tissue soldering and also to examine the effect of laser soldering parameters on the properties of repaired skin. Two mixtures of albumin solder and different combinations of ICG and gold nanoshells were prepared. A full thickness incision of 2×20 mm2 was made on the surface and after addition of mixtures it was irradiated by an 810nm diode laser at different power densities. The changes of tensile strength σt due to temperature rise, number of scan (Ns), and scan velocity (Vs) were investigated. The results showed at constant laser power density (I), σt of repaired incisions increases by increasing the concentration of gold nanoshells in solder, Ns and decreasing Vs. It is therefore important to consider the tradeoff between the scan velocity and the surface temperature for achieving an optimum operating condition. In our case this corresponds to σt =1800 gr/cm2 at I~ 47 Wcm-2, T ~ 85ºC, Ns =10 and Vs=0.3mms-1.
Abstract: A clustering based technique has been developed and implemented for Short Term Load Forecasting, in this article. Formulation has been done using Mean Absolute Percentage Error (MAPE) as an objective function. Data Matrix and cluster size are optimization variables. Model designed, uses two temperature variables. This is compared with six input Radial Basis Function Neural Network (RBFNN) and Fuzzy Inference Neural Network (FINN) for the data of the same system, for same time period. The fuzzy inference system has the network structure and the training procedure of a neural network which initially creates a rule base from existing historical load data. It is observed that the proposed clustering based model is giving better forecasting accuracy as compared to the other two methods. Test results also indicate that the RBFNN can forecast future loads with accuracy comparable to that of proposed method, where as the training time required in the case of FINN is much less.
Abstract: In this article an evolutionary technique has been used
for the solution of nonlinear Riccati differential equations of fractional order. In this method, genetic algorithm is used as a tool for
the competent global search method hybridized with active-set algorithm for efficient local search. The proposed method has been
successfully applied to solve the different forms of Riccati
differential equations. The strength of proposed method has in its
equal applicability for the integer order case, as well as, fractional
order case. Comparison of the method has been made with standard
numerical techniques as well as the analytic solutions. It is found
that the designed method can provide the solution to the equation
with better accuracy than its counterpart deterministic approaches.
Another advantage of the given approach is to provide results on
entire finite continuous domain unlike other numerical methods
which provide solutions only on discrete grid of points.
Abstract: We present on the method of inverse coherence matrix for the estimation of network connectivity from multivariate time series of a complex system. In a model system of coupled chaotic oscillators, it is shown that the inverse coherence matrix defined as the inverse of cross coherence matrix is proportional to the network connectivity. Therefore the inverse coherence matrix could be used for the distinction between the directly connected links from indirectly connected links in a complex network. We compare the result of network estimation using the method of the inverse coherence matrix with the results obtained from the coherence matrix and the partial coherence matrix.
Abstract: The present study was done primarily to address two major research gaps: firstly, development of an empirical measure of life meaningfulness for substance users and secondly, to determine the psychosocial determinants of life meaningfulness among the substance users. The study is classified into two phases: the first phase which dealt with development of Life Meaningfulness Scale and the second phase which examined the relationship between life meaningfulness and social support, abstinence self efficacy and depression. Both qualitative and quantitative approaches were used for framing items. A Principal Component Analysis yielded three components: Overall Goal Directedness, Striving for healthy lifestyle and Concern for loved ones which collectively accounted for 42.06% of the total variance. The scale and its subscales were also found to be highly reliable. Multiple regression analyses in the second phase of the study revealed that social support and abstinence self efficacy significantly predicted life meaningfulness among 48 recovering inmates of a de-addiction center while level of depression failed to predict life meaningfulness.
Abstract: Surface metrology with image processing is a challenging task having wide applications in industry. Surface roughness can be evaluated using texture classification approach. Important aspect here is appropriate selection of features that characterize the surface. We propose an effective combination of features for multi-scale and multi-directional analysis of engineering surfaces. The features include standard deviation, kurtosis and the Canny edge detector. We apply the method by analyzing the surfaces with Discrete Wavelet Transform (DWT) and Dual-Tree Complex Wavelet Transform (DT-CWT). We used Canberra distance metric for similarity comparison between the surface classes. Our database includes the surface textures manufactured by three machining processes namely Milling, Casting and Shaping. The comparative study shows that DT-CWT outperforms DWT giving correct classification performance of 91.27% with Canberra distance metric.
Abstract: To satisfy the need of outfield tests of star sensors, a
method is put forward to construct the reference attitude benchmark.
Firstly, its basic principle is introduced; Then, all the separate
conversion matrixes are deduced, which include: the conversion
matrix responsible for the transformation from the Earth Centered
Inertial frame i to the Earth-centered Earth-fixed frame w according to
the time of an atomic clock, the conversion matrix from frame w to the
geographic frame t, and the matrix from frame t to the platform frame
p, so the attitude matrix of the benchmark platform relative to the
frame i can be obtained using all the three matrixes as the
multiplicative factors; Next, the attitude matrix of the star sensor
relative to frame i is got when the mounting matrix from frame p to the
star sensor frame s is calibrated, and the reference attitude angles for
star sensor outfield tests can be calculated from the transformation
from frame i to frame s; Finally, the computer program is finished to
solve the reference attitudes, and the error curves are drawn about the
three axis attitude angles whose absolute maximum error is just 0.25ÔÇ│.
The analysis on each loop and the final simulating results manifest that
the method by precise timing to acquire the absolute reference attitude
is feasible for star sensor outfield tests.
Abstract: Planning community has been long discussing emerging paradigms within the planning theory in the face of the changing conditions of the world order. The paradigm shift concept was introduced by Thomas Kuhn, in 1960, who claimed the necessity of shifting within scientific knowledge boundaries; and following him in 1970 Imre Loktas also gave priority to the emergence of multi-paradigm societies [24]. Multi-paradigm is changing our predetermined lifeworld through uncertainties. Those uncertainties are reflected in two sides, the first one is uncertainty as a concept of possibility and creativity in public sphere and the second one is uncertainty as a risk. Therefore, it is necessary to apply a resilience planning approach to be more dynamic in controlling uncertainties which have the potential to transfigure present time and space definitions. In this way, stability of system can be achieved. Uncertainty is not only an outcome of worldwide changes but also a place-specific issue, i.e. it changes from continent to continent, a country to country; a region to region. Therefore, applying strategic spatial planning with respect to resilience principle contributes to: control, grasp and internalize uncertainties through place-specific strategies. In today-s fast changing world, planning system should follow strategic spatial projects to control multi-paradigm societies with adaptability capacities. Here, we have selected two alternatives to demonstrate; these are; 1.Tehran (Iran) from the Middle East 2.Bath (United Kingdom) from Europe. The study elaborates uncertainties and particularities in their strategic spatial planning processes in a comparative manner. Through the comparison, the study aims at assessing place-specific priorities in strategic planning. The approach is to a two-way stream, where the case cities from the extreme end of the spectrum can learn from each other. The structure of this paper is to firstly compare semi-periphery (Tehran) and coreperiphery (Bath) cities, with the focus to reveal how they equip to face with uncertainties according to their geographical locations and local particularities. Secondly, the key message to address is “Each locality requires its own strategic planning approach to be resilient.--
Abstract: In this paper an average number of re-handlings
analysis is proposed to solve the problem of finding bays
configuration in small container terminal in Gliwice, Poland.
Rehandlings in this terminal can be performed only by reachstackers.
The goal of the heuristic is to plan the reachstacter moves in the
terminal, assuming that the target containers are reached and the
number of re-handings is minimized. The real situation requires also
to take into account the model of the problem environment
uncertainty caused by the fact that many containers are not delivered
to the terminal on time, or can not be sent on scheduled time. To
enable this, the heuristic uses some assumptions to simplify problem
analysis.