Abstract: In this paper a Public Key Cryptosystem is proposed
using the number theoretic transforms (NTT) over a ring of integer
modulo a composite number. The key agreement is similar to
ElGamal public key algorithm. The security of the system is based on
solution of multivariate linear congruence equations and discrete
logarithm problem. In the proposed cryptosystem only fixed numbers
of multiplications are carried out (constant complexity) and hence the
encryption and decryption can be done easily. At the same time, it is
very difficult to attack the cryptosystem, since the cipher text is a
sequence of integers which are interrelated. The system provides
authentication also. Using Mathematica version 5.0 the proposed
algorithm is justified with a numerical example.
Abstract: Speech enhancement is the process of eliminating
noise and increasing the quality of a speech signal, which is
contaminated with other kinds of distortions. This paper is on
developing an optimum cascaded system for speech enhancement.
This aim is attained without diminishing any relevant speech
information and without much computational and time complexity.
LMS algorithm, Spectral Subtraction and Kalman filter have been
deployed as the main de-noising algorithms in this work. Since these
algorithms suffer from respective shortcomings, this work has been
undertaken to design cascaded systems in different combinations and
the evaluation of such cascades by qualitative (listening) and
quantitative (SNR) tests.
Abstract: Most of the Question Answering systems
composed of three main modules: question processing,
document processing and answer processing. Question
processing module plays an important role in QA systems. If
this module doesn't work properly, it will make problems for
other sections. Moreover answer processing module is an
emerging topic in Question Answering, where these systems
are often required to rank and validate candidate answers.
These techniques aiming at finding short and precise answers
are often based on the semantic classification.
This paper discussed about a new model for question
answering which improved two main modules, question
processing and answer processing.
There are two important components which are the bases
of the question processing. First component is question
classification that specifies types of question and answer.
Second one is reformulation which converts the user's
question into an understandable question by QA system in a
specific domain. Answer processing module, consists of
candidate answer filtering, candidate answer ordering
components and also it has a validation section for interacting
with user. This module makes it more suitable to find exact
answer. In this paper we have described question and answer
processing modules with modeling, implementing and
evaluating the system. System implemented in two versions.
Results show that 'Version No.1' gave correct answer to 70%
of questions (30 correct answers to 50 asked questions) and
'version No.2' gave correct answers to 94% of questions (47
correct answers to 50 asked questions).
Abstract: In this paper, we propose a new method to describe fractal shapes using parametric l-systems. First we introduce scaling factors in the production rules of the parametric l-systems grammars. Then we decorticate these grammars with scaling factors using turtle algebra to show the mathematical relation between l-systems and iterated function systems (IFS). We demonstrate that with specific values of the scaling factors, we find the exact relationship established by Prusinkiewicz and Hammel between l-systems and IFS.
Abstract: To help overcome limits to the density of conventional SRAMs and leakage current of SRAM cell in nanoscaled CMOS technology, we have developed a four-transistor SRAM cell. The newly developed CMOS four-transistor SRAM cell uses one word-line and one bit-line during read/write operation. This cell retains its data with leakage current and positive feedback without refresh cycle. The new cell size is 19% smaller than a conventional six-transistor cell using same design rules. Also the leakage current of new cell is 60% smaller than a conventional sixtransistor SRAM cell. Simulation result in 65nm CMOS technology shows new cell has correct operation during read/write operation and idle mode.
Abstract: Calcite aCalcite and aragonite are the two common
polymorphs of CaCO3 observed as biominerals. It is universal that
the sea water contents a high Mg2+ (50mM) relative to Ca2+ (10mM).
In vivo crystallization, Mg2+ inhibits calcite formation. For this
reason, stony corals skeleton may be formed only aragonite crystals
in the biocalcification. It is special in case of soft corals of which
formed only calcite crystal; however, this interesting phenomenon,
still uncharacterized in the marine environment, has been explored in
this study using newly purified cell-free proteins isolated from the
endoskeletal sclerites of soft coral. By recording the decline of pH in
vitro, the control of CaCO3 nucleation and crystal growth by the cellfree
proteins was revealed. Using Atomic Force Microscope, here we
find that these endoskeletal cell-free proteins significantly design the
morphological shape in the molecular-scale kinetics of crystal
formation and those proteins act as surfactants to promote ion
attachment at calcite steps.nd aragonite are the two common polymorphs of CaCO3 observed as biominerals. It is universal that the sea water contents a high Mg2+ (50mM) relative to Ca2+ (10mM). In vivo crystallization, Mg2+ inhibits calcite formation. For this reason, stony corals skeleton may be formed only aragonite crystals in the biocalcification. It is special in case of soft corals of which formed only calcite crystal; however, this interesting phenomenon, still uncharacterized in the marine environment, has been explored in this study using newly purified cell-free proteins isolated from the endoskeletal sclerites of soft coral. By recording the decline of pH in vitro, the control of CaCO3 nucleation and crystal growth by the cell-free proteins was revealed. Using Atomic Force Microscope, here we find that these endoskeletal cell-free proteins significantly design the morphological shape in the molecular-scale kinetics of crystal formation and those proteins act as surfactants to promote ion attachment at calcite steps. KeywordsBiomineralization, Calcite, Cell-free protein, Soft coral
Abstract: International trade involves both large and small firms
engaged in business overseas. Possible drivers that force companies
to enter international markets include increasing competition at the
domestic market, maturing domestic markets, and limited domestic
market opportunities. Technology is an important driving factor in
shaping international marketing strategy as well as in driving force
towards a more global marketplace, especially technology in
communication. It includes telephones, the internet, computer
systems and e-mail. There are three main marketing strategy choices,
namely standardization approach, adaptation approach and middleof-
the-road approach that companies implement to overseas markets.
The decision depends on situations and factors facing the companies
in the international markets. In this paper, the contingency concept is
considered that no single strategy can be effective in all contexts.
The effect of strategy on performance depends on specific situational
variables. Strategic fit is employed to investigate export marketing
strategy adaptation under certain environmental conditions, which in
turn can lead to superior performance.
Abstract: In this paper, the existence of periodic solutions of a delayed competitive system with the effect of toxic substances is investigated by using the Gaines and Mawhin,s continuation theorem of coincidence degree theory on time scales. New sufficient conditions are obtained for the existence of periodic solutions. The approach is unified to provide the existence of the desired solutions for the continuous differential equations and discrete difference equations. Moreover, The approach has been widely applied to study existence of periodic solutions in differential equations and difference equations.
Abstract: In this paper we introduce an ultra low power CMOS
LC oscillator and analyze a method to design a low power low phase
noise complementary CMOS LC oscillator. A 1.8GHz oscillator is
designed based on this analysis. The circuit has power supply equal
to 1.1 V and dissipates 0.17 mW power. The oscillator is also
optimized for low phase noise behavior. The oscillator phase noise is
-126.2 dBc/Hz and -144.4 dBc/Hz at 1 MHz and 8 MHz offset
respectively.
Abstract: Water level forecasting using records of past time series is of importance in water resources engineering and management. For example, water level affects groundwater tables in low-lying coastal areas, as well as hydrological regimes of some coastal rivers. Then, a reliable prediction of sea-level variations is required in coastal engineering and hydrologic studies. During the past two decades, the approaches based on the Genetic Programming (GP) and Artificial Neural Networks (ANN) were developed. In the present study, the GP is used to forecast daily water level variations for a set of time intervals using observed water levels. The measurements from a single tide gauge at Urmia Lake, Northwest Iran, were used to train and validate the GP approach for the period from January 1997 to July 2008. Statistics, the root mean square error and correlation coefficient, are used to verify model by comparing with a corresponding outputs from Artificial Neural Network model. The results show that both these artificial intelligence methodologies are satisfactory and can be considered as alternatives to the conventional harmonic analysis.
Abstract: In this article, the flow behavior around a NACA 0012 airfoil which is oscillating with different Reynolds numbers and in various amplitudes has been investigated numerically. Numerical simulations have been performed with ANSYS software. First, the 2- D geometry has been studied in different Reynolds numbers and angles of attack with various numerical methods in its static condition. This analysis was to choose the best turbulent model and comparing the grids to have the optimum one for dynamic simulations. Because the analysis was to study the blades of wind turbines, the Reynolds numbers were not arbitrary. They were in the range of 9.71e5 to 22.65e5. The angle of attack was in the range of -41.81° to 41.81°. By choosing the forward wind speed as the independent parameter, the others like Reynolds and the amplitude of the oscillation would be known automatically. The results show that the SST turbulent model is the best choice that leads the least numerical error with respect the experimental ones. Also, a dynamic stall phenomenon is more probable at lower wind speeds in which the lift force is less.
Abstract: Due to environmental concerns, the recent regulation on automobile fuel economy has been strengthened. The market demand for efficient vehicles is growing and automakers to improve engine fuel efficiency in the industry have been paying a lot of effort. To improve the fuel efficiency, it is necessary to reduce losses or to improve combustion efficiency of the engine. VVA (Variable Valve Actuation) technology enhances the engine's intake air flow, reduce pumping losses and mechanical friction losses. And also, VVA technology is the engine's low speed and high speed operation to implement each of appropriate valve lift. It improves the performance of engine in the entire operating range. This paper presents a design procedure of DC motor and drive for VVA system and shows the validity of the design result by experimental result with prototype.
Abstract: The structural interpretation of a part of eastern Potwar
(Missa Keswal) has been carried out with available seismological,
seismic and well data. Seismological data contains both the source
parameters and fault plane solution (FPS) parameters and seismic data
contains ten seismic lines that were re-interpreted by using well data.
Structural interpretation depicts two broad types of fault sets namely,
thrust and back thrust faults. These faults together give rise to pop up
structures in the study area and also responsible for many structural
traps and seismicity. Seismic interpretation includes time and depth
contour maps of Chorgali Formation while seismological interpretation
includes focal mechanism solution (FMS), depth, frequency,
magnitude bar graphs and renewal of Seismotectonic map. The Focal
Mechanism Solutions (FMS) that surrounds the study area are
correlated with the different geological and structural maps of the area
for the determination of the nature of subsurface faults. Results of
structural interpretation from both seismic and seismological data
show good correlation. It is hoped that the present work will help in
better understanding of the variations in the subsurface structure and
can be a useful tool for earthquake prediction, planning of oil field and
reservoir monitoring.
Abstract: The length of a given rational B'ezier curve is
efficiently estimated. Since a rational B'ezier function is nonlinear,
it is usually impossible to evaluate its length exactly. The
length is approximated by using subdivision and the accuracy
of the approximation n is investigated. In order to improve
the efficiency, adaptivity is used with some length estimator.
A rigorous theoretical analysis of the rate of convergence of
n to is given. The required number of subdivisions to
attain a prescribed accuracy is also analyzed. An application
to CAD parametrization is briefly described. Numerical results
are reported to supplement the theory.
Abstract: In this paper, an optimal design of linear phase digital
high pass finite impulse response (FIR) filter using Particle Swarm
Optimization with Constriction Factor and Inertia Weight Approach
(PSO-CFIWA) has been presented. In the design process, the filter
length, pass band and stop band frequencies, feasible pass band and
stop band ripple sizes are specified. FIR filter design is a multi-modal
optimization problem. The conventional gradient based optimization
techniques are not efficient for digital filter design. Given the filter
specifications to be realized, the PSO-CFIWA algorithm generates a
set of optimal filter coefficients and tries to meet the ideal frequency
response characteristic. In this paper, for the given problem, the
designs of the optimal FIR high pass filters of different orders have
been performed. The simulation results have been compared to those
obtained by the well accepted algorithms such as Parks and
McClellan algorithm (PM), genetic algorithm (GA). The results
justify that the proposed optimal filter design approach using PSOCFIWA
outperforms PM and GA, not only in the accuracy of the
designed filter but also in the convergence speed and solution
quality.
Abstract: The importance of supply chain and logistics
management has been widely recognised. Effective management of
the supply chain can reduce costs and lead times and improve
responsiveness to changing customer demands. This paper proposes a
multi-matrix real-coded Generic Algorithm (MRGA) based
optimisation tool that minimises total costs associated within supply
chain logistics. According to finite capacity constraints of all parties
within the chain, Genetic Algorithm (GA) often produces infeasible
chromosomes during initialisation and evolution processes. In the
proposed algorithm, chromosome initialisation procedure, crossover
and mutation operations that always guarantee feasible solutions
were embedded. The proposed algorithm was tested using three sizes
of benchmarking dataset of logistic chain network, which are typical
of those faced by most global manufacturing companies. A half
fractional factorial design was carried out to investigate the influence
of alternative crossover and mutation operators by varying GA
parameters. The analysis of experimental results suggested that the
quality of solutions obtained is sensitive to the ways in which the
genetic parameters and operators are set.
Abstract: Bioprocesses are appreciated as difficult to control because their dynamic behavior is highly nonlinear and time varying, in particular, when they are operating in fed batch mode. The research objective of this study was to develop an appropriate control method for a complex bioprocess and to implement it on a laboratory plant. Hence, an intelligent control structure has been designed in order to produce biomass and to maximize the specific growth rate.
Abstract: The paper describes a knowledge based system for
analysis of microscopic wear particles. Wear particles contained in
lubricating oil carry important information concerning machine
condition, in particular the state of wear. Experts (Tribologists) in the
field extract this information to monitor the operation of the machine
and ensure safety, efficiency, quality, productivity, and economy of
operation. This procedure is not always objective and it can also be
expensive. The aim is to classify these particles according to their
morphological attributes of size, shape, edge detail, thickness ratio,
color, and texture, and by using this classification thereby predict
wear failure modes in engines and other machinery. The attribute
knowledge links human expertise to the devised Knowledge Based
Wear Particle Analysis System (KBWPAS). The system provides an
automated and systematic approach to wear particle identification
which is linked directly to wear processes and modes that occur in
machinery. This brings consistency in wear judgment prediction
which leads to standardization and also less dependence on
Tribologists.
Abstract: Due to the growing dynamic and complexity within
the market environment production enterprises in particular are faced
with new logistic challenges. Moreover, it is here in this dynamic
environment that the Logistic Operating Curve Theory also reaches
its limits as a method for describing the correlations between the
logistic objectives. In order to convert this theory into a method for
dynamically monitoring productions this paper will introduce
methods for reliably and quickly identifying structural changes
relevant to logistics.
Abstract: Wireless sensor network can be applied to both abominable
and military environments. A primary goal in the design of
wireless sensor networks is lifetime maximization, constrained by
the energy capacity of batteries. One well-known method to reduce
energy consumption in such networks is data aggregation. Providing
efcient data aggregation while preserving data privacy is a challenging
problem in wireless sensor networks research. In this paper,
we present privacy-preserving data aggregation scheme for additive
aggregation functions. The Cluster-based Private Data Aggregation
(CPDA)leverages clustering protocol and algebraic properties of
polynomials. It has the advantage of incurring less communication
overhead. The goal of our work is to bridge the gap between
collaborative data collection by wireless sensor networks and data
privacy. We present simulation results of our schemes and compare
their performance to a typical data aggregation scheme TAG, where
no data privacy protection is provided. Results show the efficacy and
efficiency of our schemes.