Abstract: Home Automation is a field that, among other
subjects, is concerned with the comfort, security and energy
requirements of private homes. The configuration of automatic
functions in this type of houses is not always simple to its inhabitants
requiring the initial setup and regular adjustments. In this work, the
ubiquitous computing system vision is used, where the users- action
patterns are captured, recorded and used to create the contextawareness
that allows the self-configuration of the home automation
system. The system will try to free the users from setup adjustments
as the home tries to adapt to its inhabitants- real habits. In this paper
it is described a completely automated process to determine the light
state and act on them, taking in account the users- daily habits.
Artificial Neural Network (ANN) is used as a pattern recognition
method, classifying for each moment the light state. The work
presented uses data from a real house where a family is actually
living.
Abstract: Nonspecific protein adsorption generally occurs on
any solid surfaces and usually has adverse consequences. Adsorption
of proteins onto a solid surface is believed to be the initial and
controlling step in biofouling. Surfaces modified with end-tethered
poly(ethylene glycol) (PEG) have been shown to be protein-resistant
to some degree. In this study, the adsorption of β-casein and
lysozyme was performed on 6 different types of surfaces where PEG
was tethered onto stainless steel by polyethylene imine (PEI) through
either OH or NHS end groups. Protein adsorption was also performed
on the bare stainless steel surface as a control. The adsorption was
conducted at 23 °C and pH 7.2. In situ QCM-D was used to
determine PEG adsorption kinetics, plateau PEG chain densities,
protein adsorption kinetics and plateau protein adsorbed quantities.
PEG grafting density was the highest for a NHS coupled chain,
around 0.5 chains / nm2. Interestingly, lysozyme which has smaller
size than β-casein, appeared to adsorb much less mass than that of β-
casein. Overall, the surface with high PEG grafting density exhibited
a good protein rejection.
Abstract: Climate change has profound consequences for the agriculture of south-eastern Australia and its climate-induced water shortage in the Murray-Darling Basin. Post Keynesian Economics (PKE) macro-dynamics, along with Kaleckian investment and growth theory, are used to develop an ecological-economic system dynamics model of this complex nonlinear river basin system. The Murray- Darling Basin Simulation Model (MDB-SM) uses the principles of PKE to incorporate the fundamental uncertainty of economic behaviors of farmers regarding the investments they make and the climate change they face, particularly as regards water ecosystem services. MDB-SM provides a framework for macroeconomic policies, especially for long-term fiscal policy and for policy directed at the sustainability of agricultural water, as measured by socio-economic well-being considerations, which include sustainable consumption and investment in the river basin. The model can also reproduce other ecological and economic aspects and, for certain parameters and initial values, exhibit endogenous business cycles and ecological sustainability with realistic characteristics. Most importantly, MDBSM provides a platform for the analysis of alternative economic policy scenarios. These results reveal the importance of understanding water ecosystem adaptation under climate change by integrating a PKE macroeconomic analytical framework with the system dynamics modelling approach. Once parameterised and supplied with historical initial values, MDB-SM should prove to be a practical tool to provide alternative long-term policy simulations of agricultural water and socio-economic well-being.
Abstract: K-Means (KM) is considered one of the major
algorithms widely used in clustering. However, it still has some
problems, and one of them is in its initialization step where it is
normally done randomly. Another problem for KM is that it
converges to local minima. Genetic algorithms are one of the
evolutionary algorithms inspired from nature and utilized in the field
of clustering. In this paper, we propose two algorithms to solve the
initialization problem, Genetic Algorithm Initializes KM (GAIK) and
KM Initializes Genetic Algorithm (KIGA). To show the effectiveness
and efficiency of our algorithms, a comparative study was done
among GAIK, KIGA, Genetic-based Clustering Algorithm (GCA),
and FCM [19].
Abstract: Edge detection is usually the first step in medical
image processing. However, the difficulty increases when a
conventional kernel-based edge detector is applied to ultrasonic
images with a textural pattern and speckle noise. We designed an
adaptive diffusion filter to remove speckle noise while preserving the
initial edges detected by using a Sobel edge detector. We also propose
a genetic algorithm for edge selection to form complete boundaries of
the detected entities. We designed two fitness functions to evaluate
whether a criterion with a complex edge configuration can render a
better result than a simple criterion such as the strength of gradient.
The edges obtained by using a complex fitness function are thicker and
more fragmented than those obtained by using a simple fitness
function, suggesting that a complex edge selecting scheme is not
necessary for good edge detection in medical ultrasonic images;
instead, a proper noise-smoothing filter is the key.
Abstract: An evolutionary computing technique for solving initial value problems in Ordinary Differential Equations is proposed in this paper. Neural network is used as a universal approximator while the adaptive parameters of neural networks are optimized by genetic algorithm. The solution is achieved on the continuous grid of time instead of discrete as in other numerical techniques. The comparison is carried out with classical numerical techniques and the solution is found with a uniform accuracy of MSE ≈ 10-9 .
Abstract: The objective of this study was to determine the accuracy to estimation fetal weight by Johnson-s method and compares it with actual birth weight. The sample group was 126 infants delivered in Dan KhunThot hospital from January March 2012. Fetal weight was estimated by measuring fundal height according to Johnson-s method. The information was collected by studying historical delivery records and then analyzed by using the statistics of frequency, percentage, mean, and standard deviation. Finally, the difference was analyzed by a paired t-test.The results showed had an average birth weight was 3093.57 ± 391.03 g (mean ± SD) and 3,455 ± 454.55 g average estimated fetal weight by Johnson-s method higher than average actual birth weight was 384.09 grams. When classifying the infants according to birth weight found that low birth weight ( 4000 g) actual birth weight was more than estimated fetal weight. The difference was found between actual birth weight and estimation fetal weight of the minimum weight in high birth weight ( > 4000 g) , the appropriate birth weight (2500-3999g) and low birth weight (
Abstract: Epstein-Barr virus (EBV) is implicated in the pathogenesis of the endemic Burkitt-s lymphoma (BL). The EBVpositive BL-derived cell lines initially maintain the original tumor phenotype of EBV infection (latency I, LatI), but most of them drift toward a lymphoblast phenotype of EBV latency III (LatIII) during in vitro culturing. The aim of the present work was to characterize the B-cell subsets in EBV-positive BL cell lines and to verify whether a particular cell subset correlates with the type of EBV infection. The phenotype analysis of two EBV-negative and eleven EBV-positive (three of LatI and eight of LatIII) BL cell lines was performed by polychromatic flow cytomery, based on expression pattern of CD19, CD10, CD38, CD27, and CD5 markers. Two cell subsets, CD19+CD10+ and CD19+CD10-, were defined in LatIII BL cell lines. In both subsets, the CD27 and CD5 cell surface expression was detected in a proportion of the cells.
Abstract: The increments of aromatic structures are widely used to monitor the degree of humification. Compost derived from mix manures mixed with agricultural wastes was studied. The compost collected at day 0, 7, 14, 21, 28, 35, 49, 77, 91, 105, and 119 was divided into 3 stages, initial stage at day 0, thermophilic stage during day 1-48, and mature stage during day 49-119. The change of highest absorptions at wavelength range between 210-235 nm during day 0- 49 implied that small molecules such as nitrates and carboxylic occurred faster than the aromatic molecules that were found at wavelength around 280 nm. The ratio of electron-transfer band at wavelength 253 nm by the benzonoid band at wavelength 230 nm (E253/E230) also gradually increased during the fermenting period indicating the presence of O-containing functional groups. This was in agreement with the shift change from aliphatic to aromatic structures as shown by the relationship with C/N and H/C ratios (r = - 0.631 and -0.717, p< 0.05) since both were decreasing. Although the amounts of humic acid (HA) were not different much during the humification process, the UV spectral deconvolution showed better qualitative characteristics to help in determining the compost quality. From this study, the compost should be used at day 49 and should not be kept longer than 3 months otherwise the quality of HA would decline regardless of the amounts of HA that might be rising. This implied that other processes, such as mineralization had an influence on the humification process changing HA-s structure and its qualities.
Abstract: Linear stability analysis of wake-shear layers in twophase
shallow flows is performed in the present paper. Twodimensional
shallow water equations are used in the analysis. It is
assumed that the fluid contains uniformly distributed solid particles.
No dynamic interaction between the carrier fluid and particles is
expected in the initial moment. The stability calculations are
performed for different values of the particle loading parameter and
two other parameters which characterize the velocity ratio and the
velocity deficit. The results show that the particle loading parameter
has a stabilizing effect on the flow while the increase in the velocity
ratio or in the velocity deficit destabilizes the flow.
Abstract: The rate of nitrate adsorption by a nitrate selective ion
exchange resin was investigated in a well-stirred batch experiments.
The kinetic experimental data were simulated with diffusion models including external mass transfer, particle diffusion and chemical
adsorption. Particle pore volume diffusion and particle surface diffusion were taken into consideration separately and simultaneously
in the modeling. The model equations were solved numerically using the Crank-Nicholson scheme. An optimization technique was
employed to optimize the model parameters. All nitrate concentration
decay data were well described with the all diffusion models. The
results indicated that the kinetic process is initially controlled by external mass transfer and then by particle diffusion. The external
mass transfer coefficient and the coefficients of pore volume diffusion and surface diffusion in all experiments were close to each
other with the average value of 8.3×10-3 cm/S for external mass
transfer coefficient. In addition, the models are more sensitive to the
mass transfer coefficient in comparison with particle diffusion. Moreover, it seems that surface diffusion is the dominant particle
diffusion in comparison with pore volume diffusion.
Abstract: The study aimed to investigate the effect of rice types on chewing behaviours (chewing time, number of chews, and portion size) and bolus properties (bolus moisture content, solid loss, and particle size distribution (PSD)) in human subjects. Five cooked rice types including brown rice (BR), white rice (WR), parboiled white rice (PR), high amylose white rice (HR) and waxy white rice (WXR) were chewed by six subjects. The chewing behaviours were recorded and the food boluses were collected during mastication. Rice typeswere found to significantly influence all chewing parameters evaluated. The WXR and BR showed the most pronounced differences compared with other rice types. The initial moisture content of un-chewed WXR was lowest (43.39%) whereas those of other rice types were ranged from 66.86 to 70.33%. The bolus obtained from chewing the WXR contained lowest moisture content (56.43%) whilst its solid loss (22.03%) was not significant different from those of all rice types. In PSD evaluation using Mastersizer S, the diameter of particles measured was ranged between 4 to 3500 μm. The particle size of food bolus from BR, HR, and WXR contained much finer particles than those of WR and PR.
Abstract: This paper aims to improve a fine lapping process of
hard disk drive (HDD) lapping machines by removing materials from
each slider together with controlling the strip height (SH) variation to
minimum value. The standard deviation is the key parameter to
evaluate the strip height variation, hence it is minimized. In this
paper, a design of experiment (DOE) with factorial analysis by twoway
analysis of variance (ANOVA) is adopted to obtain a
statistically information. The statistics results reveal that initial stripe
height patterns affect the final SH variation. Therefore, initial SH
classification using a radial basis function neural network is
implemented to achieve the proportional gain prediction.
Abstract: We present a hybrid architecture of recurrent neural
networks (RNNs) inspired by hidden Markov models (HMMs). We
train the hybrid architecture using genetic algorithms to learn and
represent dynamical systems. We train the hybrid architecture on a
set of deterministic finite-state automata strings and observe the
generalization performance of the hybrid architecture when presented
with a new set of strings which were not present in the training data
set. In this way, we show that the hybrid system of HMM and RNN
can learn and represent deterministic finite-state automata. We ran
experiments with different sets of population sizes in the genetic
algorithm; we also ran experiments to find out which weight
initializations were best for training the hybrid architecture. The
results show that the hybrid architecture of recurrent neural networks
inspired by hidden Markov models can train and represent dynamical
systems. The best training and generalization performance is
achieved when the hybrid architecture is initialized with random real
weight values of range -15 to 15.
Abstract: In this paper the gradient based iterative algorithm is
presented to solve the linear matrix equation AXB +CXTD = E,
where X is unknown matrix, A,B,C,D,E are the given constant
matrices. It is proved that if the equation has a solution, then the
unique minimum norm solution can be obtained by choosing a special
kind of initial matrices. Two numerical examples show that the
introduced iterative algorithm is quite efficient.
Abstract: In the present study, an attempt was made to examine
the potential of aerobic mixed culture for decolourization of Remazol Black B dye in batch reactors. The effect of pH, temperature, inoculum, initial concentration of dye and initial concentration of
glucose was studied with an aim to determine the optimal conditions
required for maximum decolourization and degradation. The culture
exhibited maximum decolourization ability at pH between 7-8 and at
30°C. A 10% (v/v) inoculum and 1% (w/v) glucose concentration
were found to be the optimum for decolourization. A maximum of
98% decolourization was observed at 25 ppm initial concentration of
dye after 18 hours of incubation period. At higher dye concentration
of 300 ppm, the removal in colour was found to be 75% in 48 hours of incubation period. The results show that the enriched mixed culture from activated sludge has good potential in removal of Remazol Black B dye from wastewater under aerobic conditions.
Abstract: This paper proposes a dual tree complex wavelet transform (DT-CWT) based directional interpolation scheme for noisy images. The problems of denoising and interpolation are modelled as to estimate the noiseless and missing samples under the same framework of optimal estimation. Initially, DT-CWT is used to decompose an input low-resolution noisy image into low and high frequency subbands. The high-frequency subband images are interpolated by linear minimum mean square estimation (LMMSE) based interpolation, which preserves the edges of the interpolated images. For each noisy LR image sample, we compute multiple estimates of it along different directions and then fuse those directional estimates for a more accurate denoised LR image. The estimation parameters calculated in the denoising processing can be readily used to interpolate the missing samples. The inverse DT-CWT is applied on the denoised input and interpolated high frequency subband images to obtain the high resolution image. Compared with the conventional schemes that perform denoising and interpolation in tandem, the proposed DT-CWT based noisy image interpolation method can reduce many noise-caused interpolation artifacts and preserve well the image edge structures. The visual and quantitative results show that the proposed technique outperforms many of the existing denoising and interpolation methods.
Abstract: Nitrogen loss from irrigated cropland, particularly
sandy soils, significantly contributes to nitrate (NO3
-) levels in
surface and groundwaters. Thus, it is of great interest to use
inexpensive natural products that can increase the fertilizer efficiency
and decrease nitrate leaching. In this study, the ability of natural
Iranian zeolite clinoptilolite (Cp) and surfactant modified zeolite
clinoptilolite (SMZ) to remove NH4
+ and NO3
-, respectively, from
aqueous solutions was determined. The feasibility of using Cp and
SMZ as soil amendment to reduce nitrate leaching from soil using
lysimeters was also investigated. Zeolite showed 10.23% to 88.42%
NH4
+ removal efficiency over a wide range of initial NH4
+
concentrations. Nitrate removal efficiency by SMZ was 32.26% to
82.26%. Field study results showed that Cp and SMZ significantly (p
< 0.05) reduced leachate NO3-N concentration compared to control.
There was no significant difference between maximum and mean
leachate NO3-N concentration of SMZ lysimeters and those of Cp
lysimeters.
Abstract: This paper evaluates the performance of a novel
algorithm for tracking of a mobile node, interms of execution time
and root mean square error (RMSE). Particle Filter algorithm is used
to track the mobile node, however a new technique in particle filter
algorithm is also proposed to reduce the execution time. The
stationary points were calculated through trilateration and finally by
averaging the number of points collected for a specific time, whereas
tracking is done through trilateration as well as particle filter
algorithm. Wi-Fi signal is used to get initial guess of the position of
mobile node in x-y coordinates system. Commercially available
software “Wireless Mon" was used to read the WiFi signal strength
from the WiFi card. Visual Cµ version 6 was used to interact with
this software to read only the required data from the log-file
generated by “Wireless Mon" software. Results are evaluated through
mathematical modeling and MATLAB simulation.
Abstract: The present research focus on the processing of mullite-based ceramics from oil refinery industrial wastes and byproducts of agricultural industry and on the investigating of silane modified surface of ceramics. Two waste products were used as initial material – waste aluminum oxide and waste rice husk. The burning - out additives used were waste rise husk. It is known that the oxide ceramics surface is hydrophilic due to the presence of – OH groups in it. The nature of ceramic surface regarding permeation of water and hydrocarbons can be changed by further treatment with silanes. The samples were studied mainly by X-ray analysis, FT-IR absorbance measurements and microscopic analysis. The X-ray analyses showed the phase composition depends on the firing temperature and on the purity of the starting alumina. Two kind of silanes were used for the transformation of surface from hydrophilic to hydrophobic – trimethoxymethylsilane (TMMS) and trimethylclorsilane (TMCS).