Abstract: This paper proposes a model of adding relations between
members of the same level in a pyramid organization structure
which is a complete K-ary tree such that the communication of
information between every member in the organization becomes the
most efficient. When edges between one node and every other node
with the same depth N in a complete K-ary tree of height H are
added, an optimal depth N* = H is obtained by minimizing the total
path length which is the sum of lengths of shortest paths between
every pair of all nodes.
Abstract: A statistical optimization of the saccharification
process of EFB was studied. The statistical analysis was done by
applying faced centered central composite design (FCCCD) under
response surface methodology (RSM). In this investigation, EFB
dose, enzyme dose and saccharification period was examined, and the
maximum 53.45% (w/w) yield of reducing sugar was found with 4%
(w/v) of EFB, 10% (v/v) of enzyme after 120 hours of incubation. It
can be calculated that the conversion rate of cellulose content of the
substrate is more than 75% (w/w) which can be considered as a
remarkable achievement. All the variables, linear, quadratic and
interaction coefficient, were found to be highly significant, other than
two coefficients, one quadratic and another interaction coefficient.
The coefficient of determination (R2) is 0.9898 that confirms a
satisfactory data and indicated that approximately 98.98% of the
variability in the dependent variable, saccharification of EFB, could
be explained by this model.
Abstract: Behavior of dams against the seismic loads has been
studied by many researchers. Most of them proposed new numerical
methods to investigate the dam safety. In this paper, to study the
effect of nonlinear parameters of concrete in gravity dams, a twodimensional
approach was used including the finite element method,
staggered method and smeared crack approach. Effective parameters
in the models are physical properties of concrete such as modulus of
elasticity, tensile strength and specific fracture energy. Two different
models were used in foundation (mass-less and massed) in order to
determine the seismic response of concrete gravity dams. Results
show that when the nonlinear analysis includes the dam- foundation
interaction, the foundation-s mass, flexibility and radiation damping
are important in gravity dam-s response.
Abstract: The increase popularity of multimedia application especially in image processing places a great demand on efficient data storage and transmission techniques. Network communication such as wireless network can easily be intercepted and cause of confidential information leaked. Unfortunately, conventional compression and encryption methods are too slow; it is impossible to carry out real time secure image processing. In this research, Embedded Zerotree Wavelet (EZW) encoder which specially designs for wavelet compression is examined. With this algorithm, three methods are proposed to reduce the processing time, space and security protection that will be secured enough to protect the data.
Abstract: Recently, most digital systems are designed as GALS (Globally Asynchronous Locally Synchronous) systems. Several architectures have been proposed as bus architectures for a GALS system : shared bus, segmented bus, ring bus, and so on. In this study, we propose a ring segmented bus architecture which is a combination of segmented bus and ring bus architecture with the aim of throughput enhancement. In a segmented bus architecture, segments are connected in series. By connecting the segments at the end of the bus and constructing the ring bus, it becomes possible to allocate a channel of the bus bidirectionally. The bus channel is allocated to the shortest path between segments. We consider a metastable operation caused by asynchronous communication between segments and a burst transfer between segments. According to the result of simulation, it is shown that the GALS system designed by the proposed method has the desired operations.
Abstract: Success is a European project that will implement several clean transport offers in three European cities and evaluate the environmental impacts. The goal of these measures is to improve urban mobility or the displacement of residents inside cities. For e.g. park and ride, electric vehicles, hybrid bus and bike sharing etc. A list of 28 criteria and 60 measures has been established for evaluation of these transport projects. The evaluation criteria can be grouped into: Transport, environment, social, economic and fuel consumption. This article proposes a decision support system based that encapsulates a hybrid approach based on fuzzy logic, multicriteria analysis and belief theory for the evaluation of impacts of urban mobility solutions. A web-based tool called DeSSIA (Decision Support System for Impacts Assessment) has been developed that treats complex data. The tool has several functionalities starting from data integration (import of data), evaluation of projects and finishes by graphical display of results. The tool development is based on the concept of MVC (Model, View, and Controller). The MVC is a conception model adapted to the creation of software's which impose separation between data, their treatment and presentation. Effort is laid on the ergonomic aspects of the application. It has codes compatible with the latest norms (XHTML, CSS) and has been validated by W3C (World Wide Web Consortium). The main ergonomic aspect focuses on the usability of the application, ease of learning and adoption. By the usage of technologies such as AJAX (XML and Java Script asynchrones), the application is more rapid and convivial. The positive points of our approach are that it treats heterogeneous data (qualitative, quantitative) from various information sources (human experts, survey, sensors, model etc.).
Abstract: This paper investigates the effects of lubrication on
the quantity of heat emission of two spur gear. System with and
without lubrication effected on the quantity of heat induced on the
gear box (oil - bearings – gears). Both of lubrication and speed of
motor are affected on the performance of gears. Research investigated
the lubrication on the system with and without loading as well as the
wear of gears and bearing's conditions. Gear box investigated
includes the motor, pump, two spur gears, two shafts; speed change
used pulleys and belts. Load used equal one weight ones of gear.
Lubrication mechanism used jet system (upper and lower jet). Gear
box we used system of jet lubrication is perpendicular direction of
the contact line between two teeth. Results appeared in this work that
the lubrication is the vital parameter which is affected on the
performance and durability of gears and bearings. In macroscopic
observation, we noted that damage of bearings happened during the
absence of lubrication as well as abrasive of wear of teeth. Higher
speed of motor without lubrication increased the noise, but in the
presence of lubrication was decreased.
Abstract: This paper used a fuzzy kohonen neural network for medical image segmentation. Image segmentation plays a important role in the many of medical imaging applications by automating or facilitating the diagnostic. The paper analyses the tumor by extraction of the features of (area, entropy, means and standard deviation).These measurements gives a description for a tumor.
Abstract: Inferring the network structure from time series data
is a hard problem, especially if the time series is short and noisy.
DNA microarray is a technology allowing to monitor the mRNA
concentration of thousands of genes simultaneously that produces
data of these characteristics. In this study we try to investigate the
influence of the experimental design on the quality of the result.
More precisely, we investigate the influence of two different types of
random single gene perturbations on the inference of genetic networks
from time series data. To obtain an objective quality measure for
this influence we simulate gene expression values with a biologically
plausible model of a known network structure. Within this framework
we study the influence of single gene knock-outs in opposite to
linearly controlled expression for single genes on the quality of the
infered network structure.
Abstract: This paper describes a rapid prototyping (RP)
technology for forming a hydroxyapatite (HA) bone scaffold model.
The HA powder and a silica sol are mixed into bioceramic slurry form
under a suitable viscosity. The HA particles are embedded in the
solidified silica matrix to form green parts via a wide range of process
parameters after processing by selective laser sintering (SLS). The
results indicate that the proposed process was possible to fabricate
multilayers and hollow shell structure with brittle property but
sufficient integrity for handling prior to post-processing. The
fabricated bone scaffold models had a surface finish of 25
Abstract: The aim of this work is to present a multi-objective optimization method to find maximum efficiency kinematics for a flapping wing unmanned aerial vehicle. We restrained our study to rectangular wings with the same profile along the span and to harmonic dihedral motion. It is assumed that the birdlike aerial vehicle (whose span and surface area were fixed respectively to 1m and 0.15m2) is in horizontal mechanically balanced motion at fixed speed. We used two flight physics models to describe the vehicle aerodynamic performances, namely DeLaurier-s model, which has been used in many studies dealing with flapping wings, and the model proposed by Dae-Kwan et al. Then, a constrained multi-objective optimization of the propulsive efficiency is performed using a recent evolutionary multi-objective algorithm called є-MOEA. Firstly, we show that feasible solutions (i.e. solutions that fulfil the imposed constraints) can be obtained using Dae-Kwan et al.-s model. Secondly, we highlight that a single objective optimization approach (weighted sum method for example) can also give optimal solutions as good as the multi-objective one which nevertheless offers the advantage of directly generating the set of the best trade-offs. Finally, we show that the DeLaurier-s model does not yield feasible solutions.
Abstract: The excessive use of agricultural pesticides and the
resulting contamination of food and beds of rivers have been a
recurring problem nowadays. Some of these substances can cause
changes in endocrine balance and impair reproductive function of
human and animal population. In the present study, we evaluated the
possible effects of the fungicide cuprous copper oxide Sandoz® on
pregnant Wistar rats. They received a daily oral administration of 103
or 3.103 mg/kg of the fungicide from the 6th to the 15th day of
gestation. On day 21 of gestation, the maternal and fetal toxicity
parameters and indices were determined. The administration of
cuprous oxide (Copper Sandoz) in Wistar rats, the period of
organogenesis, revealed no evidence of maternal toxicity or embryo
at the studied doses.
Abstract: Different types of aggregation operators such as the
ordered weighted quasi-arithmetic mean (Quasi-OWA) operator and
the normalized Hamming distance are studied. We introduce the use
of the OWA operator in generalized distances such as the quasiarithmetic
distance. We will call these new distance aggregation the
ordered weighted quasi-arithmetic distance (Quasi-OWAD) operator.
We develop a general overview of this type of generalization and
study some of their main properties such as the distinction between
descending and ascending orders. We also consider different families
of Quasi-OWAD operators such as the Minkowski ordered weighted
averaging distance (MOWAD) operator, the ordered weighted
averaging distance (OWAD) operator, the Euclidean ordered
weighted averaging distance (EOWAD) operator, the normalized
quasi-arithmetic distance, etc.
Abstract: The purpose of this article is to propose a model designed to achieve Total Knowledge Transfer in the public health sector. The Total Knowledge Transfer Model integrated four essential organizational factors which have been under examined in totality in the literature. The research design was inductive in nature and used a case study for accomplishing the research objectives. The researcher investigated the factors that created a base to design a framework for total knowledge transfer in the public health sector. The results of this study are drawn from a fairly large sample in only two hospitals. A further research can be conducted to cover more responses from a wider health sector. The Total Knowledge Transfer Model is essential to improve the transfer and application of total common health knowledge.
Abstract: A trustworthy voting process in democratic is
important that each vote is recorded with accuracy and impartiality.
The accuracy and impartiality are tallied in high rate with biometric
system. One of the sign is a fingerprint. Fingerprint recognition is
still a challenging problem, because of the distortions among the
different impression of the same finger. Because of the trustworthy of
biometric voting technologies, it may give a great effect on numbers
of voter-s participation and outcomes of the democratic process.
Hence in this study, the authors are interested in designing and
analyzing the Electronic Voting System and the participation of the
users. The system is based on the fingerprint minutiae with the
addition of person ID number. This is in order to enhance the
accuracy and speed of the voting process. The new design is analyzed
by conducting pilot election among a class of students for selecting
their representative.
Abstract: Video streaming over lossy IP networks is very
important issues, due to the heterogeneous structure of networks.
Infrastructure of the Internet exhibits variable bandwidths, delays,
congestions and time-varying packet losses. Because of variable
attributes of the Internet, video streaming applications should not
only have a good end-to-end transport performance but also have a
robust rate control, furthermore multipath rate allocation mechanism.
So for providing the video streaming service quality, some other
components such as Bandwidth Estimation and Adaptive Rate
Controller should be taken into consideration. This paper gives an
overview of video streaming concept and bandwidth estimation tools
and then introduces special architectures for bandwidth adaptive
video streaming. A bandwidth estimation algorithm – pathChirp,
Optimized Rate Controllers and Multipath Rate Allocation Algorithm
are considered as all-in-one solution for video streaming problem.
This solution is directed and optimized by a decision center which is
designed for obtaining the maximum quality at the receiving side.
Abstract: In this paper, we present a matrix game-theoretic cross-layer optimization formulation to maximize the network lifetime in wireless ad hoc networks with network coding. To this end, we introduce a cross-layer formulation of general NUM (network utility maximization) that accommodates routing, scheduling, and stream control from different layers in the coded networks. Specifically, for the scheduling problem and then the objective function involved, we develop a matrix game with the strategy sets of the players corresponding to hyperlinks and transmission modes, and design the payoffs specific to the lifetime. In particular, with the inherit merit that matrix game can be solved with linear programming, our cross-layer programming formulation can benefit from both game-based and NUM-based approaches at the same time by cooperating the programming model for the matrix game with that for the other layers in a consistent framework. Finally, our numerical example demonstrates its performance results on a well-known wireless butterfly network to verify the cross-layer optimization scheme.
Abstract: Wireless Sensor Networks consist of inexpensive, low power sensor nodes deployed to monitor the environment and collect
data. Gathering information in an energy efficient manner is a critical aspect to prolong the network lifetime. Clustering algorithms have an advantage of enhancing the network lifetime. Current clustering algorithms usually focus on global re-clustering and local re-clustering separately. This paper, proposed a combination of those two reclustering methods to reduce the energy consumption of the network. Furthermore, the proposed algorithm can apply to homogeneous as well as heterogeneous wireless sensor networks. In addition, the cluster head rotation happens, only when its energy drops below a dynamic threshold value computed by the algorithm. The simulation result shows that the proposed algorithm prolong the network lifetime compared to existing algorithms.
Abstract: In this paper, we study statistical multiplexing of VBR
video in ATM networks. ATM promises to provide high speed realtime
multi-point to central video transmission for telemedicine
applications in rural hospitals and in emergency medical services.
Video coders are known to produce variable bit rate (VBR) signals
and the effects of aggregating these VBR signals need to be
determined in order to design a telemedicine network infrastructure
capable of carrying these signals. We first model the VBR video
signal and simulate it using a generic continuous-data autoregressive
(AR) scheme. We carry out the queueing analysis by the Fluid
Approximation Model (FAM) and the Markov Modulated Poisson
Process (MMPP). The study has shown a trade off: multiplexing
VBR signals reduces burstiness and improves resource utilization,
however, the buffer size needs to be increased with an associated
economic cost. We also show that the MMPP model and the Fluid
Approximation model fit best, respectively, the cell region and the
burst region. Therefore, a hybrid MMPP and FAM completely
characterizes the overall performance of the ATM statistical
multiplexer. The ramifications of this technology are clear: speed,
reliability (lower loss rate and jitter), and increased capacity in video
transmission for telemedicine. With migration to full IP-based
networks still a long way to achieving both high speed and high
quality of service, the proposed ATM architecture will remain of
significant use for telemedicine.
Abstract: Job stress is one of the most important concepts for
the today-s corporate as well as institutional world. The current study
is conducted to identify the causes of faculty stress at Higher
Education in Pakistan. For the purpose, Public & Private Business
Schools of Punjab is selected as representative of Pakistan. A sample
of 300 faculty members (214 males, 86 females) responded to the
survey. Regression analysis shows that the Workload, Student
Related issues and Role Conflicts are the major sources contributing
significantly towards producing stress. The study also revealed that
Private sector faculty members experienced more stress as compared
to faculty in Public sector Business Schools. Moreover, females,
younger ages, lower designation & low qualification faculty
members experience more stress as compared to males, older ages,
higher designation and high qualification. The study yield many
significant results for the policy makers of Business Institutions.