Abstract: Geopolymer concretes are new class of construction
materials that have emerged as an alternative to Ordinary Portland
cement concrete. Considerable researches have been carried out on
material development of geopolymer concrete; however, a few studies
have been reported on the structural use of them. This paper presents
the bond behaviors of reinforcement embedded in fly ash based
geopolymer concrete. The development lengths of reinforcement for
various compressive strengths of concrete, 20, 30 and 40 MPa, and
reinforcement diameters, 10, 16 and 25 mm, are investigated. Total 27
specimens were manufactured and pull-out test according to EN 10080
was applied to measure bond strength and slips between concrete and
reinforcements. The average bond strengths decreased from 23.06MPa
to 17.26 MPa, as the diameters of reinforcements increased from
10mm to 25mm. The compressive strength levels of geopolymer
concrete showed no significant influence on bond strengths in this
study. Also, the bond-slip relations between geopolymer concrete and
reinforcement are derived using non-linear regression analysis for
various experimental conditions.
Abstract: Systems Engineering plays a key role during industrial
product development of complex technical systems. The need for
systems engineers in industry is growing. But there is a gap between
the industrial need and the academic education. Normally the
academic education is focused on the domain specific design,
implementation and testing of technical systems. Necessary systems
engineering expertise like knowledge about requirements analysis,
product cost estimation, management or social skills are poorly
taught. Thus there is the need of new academic concepts for teaching
systems engineering skills. This paper presents a project-orientated
training concept to prepare students from different technical degree
programs for systems engineering activities. The training concept has
been initially implemented and applied in the industrial engineering
master program of the University of Applied Sciences Offenburg.
Abstract: Nowadays, Photovoltaic-PV Farms/ Parks and large
PV-Smart Grid Interface Schemes are emerging and commonly
utilized in Renewable Energy distributed generation. However, PVhybrid-
Dc-Ac Schemes using interface power electronic converters
usually has negative impact on power quality and stabilization of
modern electrical network under load excursions and network fault
conditions in smart grid. Consequently, robust FACTS based
interface schemes are required to ensure efficient energy utilization
and stabilization of bus voltages as well as limiting switching/fault
onrush current condition. FACTS devices are also used in smart grid-
Battery Interface and Storage Schemes with PV-Battery Storage
hybrid systems as an elegant alternative to renewable energy
utilization with backup battery storage for electric utility energy and
demand side management to provide needed energy and power
capacity under heavy load conditions. The paper presents a robust
interface PV-Li-Ion Battery Storage Interface Scheme for
Distribution/Utilization Low Voltage Interface using FACTS
stabilization enhancement and dynamic maximum PV power tracking
controllers.
Digital simulation and validation of the proposed scheme is done
using MATLAB/Simulink software environment for Low Voltage-
Distribution/Utilization system feeding a hybrid Linear-Motorized
inrush and nonlinear type loads from a DC-AC Interface VSC-6-
pulse Inverter Fed from the PV Park/Farm with a back-up Li-Ion
Storage Battery.
Abstract: In this work, neural networks methods MLP type were
applied to a database from an array of six sensors for the detection of
three toxic gases. The choice of the number of hidden layers and the
weight values are influential on the convergence of the learning
algorithm. We proposed, in this article, a mathematical formula to
determine the optimal number of hidden layers and good weight
values based on the method of back propagation of errors. The results
of this modeling have improved discrimination of these gases and
optimized the computation time. The model presented here has
proven to be an effective application for the fast identification of
toxic gases.
Abstract: The continuous decline of petroleum and natural gas
reserves and non linear rise of oil price has brought about a
realisation of the need for a change in our perpetual dependence on
the fossil fuel. A day to day increased consumption of crude and
petroleum products has made a considerable impact on our foreign
exchange reserves. Hence, an alternate resource for the conversion of
energy (both liquid and gas) is essential for the substitution of
conventional fuels. Biomass is the alternate solution for the present
scenario. Biomass can be converted into both liquid as well as
gaseous fuels and other feedstocks for the industries.
Abstract: Container handling problems at container terminals
are NP-hard problems. This paper presents an approach using
discrete-event simulation modeling to optimize solution for storage
space allocation problem, taking into account all various interrelated
container terminal handling activities. The proposed approach is
applied on a real case study data of container terminal at Alexandria
port. The computational results show the effectiveness of the
proposed model for optimization of storage space allocation in
container terminal where 54% reduction in containers handling time
in port is achieved.
Abstract: The globalization of markets, the need to develop
competitive advantages and core competencies, among other things,
lead organizations to increasingly cross borders to operate in other
countries. The expatriation of professionals who go to work in
another country besides their own becomes increasingly common. In
order to generate data about this issue, research was conducted
concerning the perception of expatriate employees concerning
expatriation success. The research method used was case study
through a qualitative approach. This research was done through
interviews with five India expatriates and five China expatriates,
interview with expatriate department heads and analysis of company
documents. It was found that there are differences between the
organizational perception and perception of expatriates of what
constitutes mission success. The paper also provides suggestions for
further research and suggestions for future expatriates.
Abstract: The ad hoc networks are the future of wireless
technology as everyone wants fast and accurate error free information
so keeping this in mind Bit Error Rate (BER) and power is optimized
in this research paper by using the Genetic Algorithm (GA). The
digital modulation techniques used for this paper are Binary Phase
Shift Keying (BPSK), M-ary Phase Shift Keying (M-ary PSK), and
Quadrature Amplitude Modulation (QAM). This work is
implemented on Wireless Ad Hoc Networks (WLAN). Then it is
analyze which modulation technique is performing well to optimize
the BER and power of WLAN.
Abstract: In this paper, we present preconditioned generalized
accelerated overrelaxation (GAOR) methods for solving certain
nonsingular linear system. We compare the spectral radii of the
iteration matrices of the preconditioned and the original methods. The
comparison results show that the preconditioned GAOR methods
converge faster than the GAOR method whenever the GAOR method
is convergent. Finally, we give two numerical examples to confirm our
theoretical results.
Abstract: In recent years, the compression of date (Phoenix
dactylifera L.) fruit powders (DP) to obtain date tablets (DT) has
been suggested as a promising form of valorization of non
commercial valuable date fruit (DF) varieties. To further improve
and characterize DT, the present study aims to investigate the
influence of the DP particle size and compression force on some
physical properties of DT. The results show that independently of
particle size, the hardness (y) of tablets increases with the increase of
the compression force (x) following a logarithmic law (y = a ln (bx)
where a and b are the constants of model). Further, a full factorial
design (FFD) at two levels, applied to investigate the erosion %,
reveals that the effects of time and particle size are the same in
absolute value and they are beyond the effect of the compression.
Regarding the disintegration time, the obtained results also by means
of a FFD show that the effect of the compression force exceeds 4
times that of the DP particle size. As final stage, the color parameters
in the CIELab system of DT immediately after their obtaining are
differently influenced by the size of the initial powder.
Abstract: The IEEE 802.22 working group aims to drive the
Digital Video Broadcasting-Terrestrial (DVB-T) bands for data
communication to the rural area without interfering the TV broadcast.
In this paper, we arrive at a closed-form expression for average
detection probability of Fusion center (FC) with multiple antenna
over the κ − μ fading channel model. We consider a centralized
cooperative multiple antenna network for reporting. The DVB-T
samples forwarded by the secondary user (SU) were combined using
Maximum ratio combiner at FC, an energy detection is performed
to make the decision. The fading effects of the channel degrades
the detection probability of the FC, a generalized independent and
identically distributed (IID) κ − μ and an additive white Gaussian
noise (AWGN) channel is considered for reporting and sensing
respectively. The proposed system performance is verified through
simulation results.
Abstract: Securing the confidential data transferred via wireless
network remains a challenging problem. It is paramount to ensure
that data are accessible only by the legitimate users rather than by the
attackers. One of the most serious threats to organization is jamming,
which disrupts the communication between any two pairs of nodes.
Therefore, designing an attack-defending scheme without any packet
loss in data transmission is an important challenge. In this paper,
Dependence based Malicious Route Defending DMRD Scheme has
been proposed in multi path routing environment to prevent jamming
attack. The key idea is to defend the malicious route to ensure
perspicuous transmission. This scheme develops a two layered
architecture and it operates in two different steps. In the first step,
possible routes are captured and their agent dependence values are
marked using triple agents. In the second step, the dependence values
are compared by performing comparator filtering to detect malicious
route as well as to identify a reliable route for secured data
transmission. By simulation studies, it is observed that the proposed
scheme significantly identifies malicious route by attaining lower
delay time and route discovery time; it also achieves higher
throughput.
Abstract: Medulloblastoma (MB) is one of the most prevalent
brain tumours among paediatrics. Although its management has
evolved over time still there is need to find new therapeutic targets
for MB that can result in less normal tissue toxicity while improving
survival and reducing recurrence. This literature review is aimed at
finding new potential therapeutic targets for MB focusing on viruses
that can be used as potential targets for MB. The review also gives an
over-view of management of paediatric Medulloblastoma focusing on
Radiotherapy management.
Abstract: Femtocells are regarded as a milestone for next
generation cellular networks. As femtocells are deployed in an
unplanned manner, there is a chance of assigning same resource to
neighboring femtocells. This scenario may induce co-channel
interference and may seriously affect the service quality of
neighboring femtocells. In addition, the dominant transmit power of a
femtocell will induce co-tier interference to neighboring femtocells.
Thus to jointly handle co-tier and co-channel interference, we
propose an interference-free power and resource block allocation
(IFPRBA) algorithm for closely located, closed access femtocells.
Based on neighboring list, inter-femto-base station distance and
uplink noise power, the IFPRBA algorithm assigns non-interfering
power and resource to femtocells. The IFPRBA algorithm also
guarantees the quality of service to femtouser based on the
knowledge of resource requirement, connection type, and the
tolerable delay budget. Simulation result shows that the interference
power experienced in IFPRBA algorithm is below the tolerable
interference power and hence the overall service success ratio, PRB
efficiency and network throughput are maximum when compared to
conventional resource allocation framework for femtocell (RAFF)
algorithm.
Abstract: The main purpose of this research is to
comprehensively explore and identify the problems of attestation of
the public servants and to propose solutions for these issues through
deeply analyzing laws and the legal theoretical literature. For the
detailed analysis of the above-mentioned problems we will use some
research methods, the implementation of which has a goal to ensure
the objectivity and clarity of scientific research and its results.
Abstract: Real time image and video processing is a demand in
many computer vision applications, e.g. video surveillance, traffic
management and medical imaging. The processing of those video
applications requires high computational power. Thus, the optimal
solution is the collaboration of CPU and hardware accelerators. In
this paper, a Canny edge detection hardware accelerator is proposed.
Edge detection is one of the basic building blocks of video and image
processing applications. It is a common block in the pre-processing
phase of image and video processing pipeline. Our presented
approach targets offloading the Canny edge detection algorithm from
processing system (PS) to programmable logic (PL) taking the
advantage of High Level Synthesis (HLS) tool flow to accelerate the
implementation on Zynq platform. The resulting implementation
enables up to a 100x performance improvement through hardware
acceleration. The CPU utilization drops down and the frame rate
jumps to 60 fps of 1080p full HD input video stream.
Abstract: The tomato is a very important crop, whose
cultivation in the Mediterranean basin is severely affected by the
phytoparasitic weed Phelipanche ramosa. The semiarid regions of
the world are considered the main areas where this parasitic weed is
established causing heavy infestation as it is able to produce high
numbers of seeds (up to 500,000 per plant), which remain viable for
extended period (more than 20 years). In this paper the results
obtained from eleven treatments in order to control this parasitic
weed including chemical, agronomic, biological and biotechnological
methods compared with the untreated test under two plowing depths
(30 and 50 cm) are reported. The split-plot design with 3 replicates
was adopted. In 2014 a trial was performed in Foggia province
(southern Italy) on processing tomato (cv Docet) grown in the field
infested by Phelipanche ramosa. Tomato seedlings were transplant
on May 5, on a clay-loam soil. During the growing cycle of the
tomato crop, at 56-78 and 92 days after transplantation, the number
of parasitic shoots emerged in each plot was detected. At tomato
harvesting, on August 18, the major quantity-quality yield parameters
were determined (marketable yield, mean weight, dry matter, pH,
soluble solids and color of fruits). All data were subjected to analysis
of variance (ANOVA) and the means were compared by Tukey's test.
Each treatment studied did not provide complete control against
Phelipanche ramosa. However, among the different methods tested,
some of them which Fusarium, gliphosate, radicon biostimulant and
Red Setter tomato cv (improved genotypes obtained by Tilling
technology) under deeper plowing (50 cm depth) proved to mitigate
the virulence of the Phelipanche ramose attacks. It is assumed that
these effects can be improved combining some of these treatments
each other, especially for a gradual and continuing reduction of the
“seed bank” of the parasite in the soil.
Abstract: Learning through creation of contextual games is a
very promising approach when undertaking interdisciplinary and
international group projects. During 2013 and 2014 the authors
organized two intensive student projects. The two projects were in
different countries and different conditions. Between them, the two
projects involved 68 students and 12 mentors from five EU countries
and from various academic disciplines. In this paper we share our
experience of these two projects and we suggest approaches that can
be utilized to strengthen the chances of succeeding in short (12-15
days long) intensive student projects.
Abstract: This paper investigates the viability of using carbon
fiber reinforced epoxy composites modified with carbon nanotubes to
strengthening reinforced concrete (RC) columns. Six RC columns
was designed and constructed according to ASCE standards. The
columns were wrapped using carbon fiber sheets impregnated with
either neat epoxy or CNTs modified epoxy. These columns were then
tested under concentric axial loading. Test results show that;
compared to the unwrapped specimens; wrapping concrete columns
with carbon fiber sheet embedded in CNTs modified epoxy resulted
in an increase in its axial load resistance, maximum displacement,
and toughness values by 24%, 109% and 232%, respectively. These
results reveal that adding CNTs into epoxy resin enhanced the
confinement effect, specifically, increased the axial load resistance,
maximum displacement, and toughness values by 11%, 6%, and
19%, respectively compared with columns strengthening with carbon
fiber sheet embedded in neat epoxy.
Abstract: This paper presents nonlinear pulse propagation characteristics for different input optical pulse shapes with various input pulse energy levels in semiconductor optical amplifiers. For simulation of nonlinear pulse propagation, finite-difference beam propagation method is used to solve the nonlinear Schrödinger equation. In this equation, gain spectrum dynamics, gain saturation are taken into account which depends on carrier depletion, carrier heating, spectral-hole burning, group velocity dispersion, self-phase modulation and two photon absorption. From this analysis, we obtained the output waveforms and spectra for different input pulse shapes as well as for different input energies. It shows clearly that the peak position of the output waveforms are shifted toward the leading edge which due to the gain saturation of the SOA for higher input pulse energies. We also analyzed and compared the normalized difference of full-width at half maximum for different input pulse shapes in the SOA.