Abstract: This paper describes the two actual tendencies in the
software development process usage: 'Scrum' and 'work in home
office'. It-s exposed the four main challenges to adopt Scrum
framework for distributed teams in this cited kind of work. The
challenges are mainly based on the communication problems due
distances since the Scrum encourages the team to work together in
the same room, and this is not possible when people work distributed
in their homes.
Abstract: Finite impulse response (FIR) filters have the advantage of linear phase, guaranteed stability, fewer finite precision errors, and efficient implementation. In contrast, they have a major disadvantage of high order need (more coefficients) than IIR counterpart with comparable performance. The high order demand imposes more hardware requirements, arithmetic operations, area usage, and power consumption when designing and fabricating the filter. Therefore, minimizing or reducing these parameters, is a major goal or target in digital filter design task. This paper presents an algorithm proposed for modifying values and the number of non-zero coefficients used to represent the FIR digital pulse shaping filter response. With this algorithm, the FIR filter frequency and phase response can be represented with a minimum number of non-zero coefficients. Therefore, reducing the arithmetic complexity needed to get the filter output. Consequently, the system characteristic i.e. power consumption, area usage, and processing time are also reduced. The proposed algorithm is more powerful when integrated with multiplierless algorithms such as distributed arithmetic (DA) in designing high order digital FIR filters. Here the DA usage eliminates the need for multipliers when implementing the multiply and accumulate unit (MAC) and the proposed algorithm will reduce the number of adders and addition operations needed through the minimization of the non-zero values coefficients to get the filter output.
Abstract: In the present study, a heterogeneous and
homogeneous gas flow dispersion model for simulation and
optimisation of a large-scale catalytic slurry reactor for the direct
synthesis of dimethyl ether (DME) from syngas and CO2, using a
churn-turbulent regime was developed. In the heterogeneous gas flow
model the gas phase was distributed into two bubble phases: small
and large, however in the homogeneous one, the gas phase was
distributed into only one large bubble phase. The results indicated
that the heterogeneous gas flow model was in more agreement with
experimental pilot plant data than the homogeneous one.
Abstract: Distributed wireless sensor network consist on several
scattered nodes in a knowledge area. Those sensors have as its only
power supplies a pair of batteries that must let them live up to five
years without substitution. That-s why it is necessary to develop
some power aware algorithms that could save battery lifetime as
much as possible. In this is document, a review of power aware
design for sensor nodes is presented. As example of implementations,
some resources and task management, communication, topology
control and routing protocols are named.
Abstract: With Power system movement toward restructuring along with factors such as life environment pollution, problems of transmission expansion and with advancement in construction technology of small generation units, it is expected that small units like wind turbines, fuel cells, photovoltaic, ... that most of the time connect to the distribution networks play a very essential role in electric power industry. With increase in developing usage of small generation units, management of distribution networks should be reviewed. The target of this paper is to present a new method for optimal management of active and reactive power in distribution networks with regard to costs pertaining to various types of dispersed generations, capacitors and cost of electric energy achieved from network. In other words, in this method it-s endeavored to select optimal sources of active and reactive power generation and controlling equipments such as dispersed generations, capacitors, under load tapchanger transformers and substations in a way that firstly costs in relation to them are minimized and secondly technical and physical constraints are regarded. Because the optimal management of distribution networks is an optimization problem with continuous and discrete variables, the new evolutionary method based on Ant Colony Algorithm has been applied. The simulation results of the method tested on two cases containing 23 and 34 buses exist and will be shown at later sections.
Abstract: In a very simple form a Mobile Agent is an independent piece of code that has mobility and autonomy behavior. One of the main advantages of using Mobile Agent in a network is - it reduces network traffic load. In an, ad hoc network Mobile Agent can be used to protect the network by using agent based IDS or IPS. Besides, to deploy dynamic software in the network or to retrieve information from network nodes Mobile Agent can be useful. But in an ad hoc network the Mobile Agent itself needs some security. Security services should be guaranteed both for Mobile Agent and for Agent Server. In this paper to protect the Mobile Agent and Agent Server in an ad hoc network we have proposed a solution which is based on Threshold Cryptography, a new vibe in the cryptographic world where trust is distributed among multiple nodes in the network.
Abstract: The new optimization method for fiber orientation
angle optimization of symmetrical multilayer plates like plywood is
proposed. Optimization method consists of seeking for minimal
compliance by choosing appropriate fiber orientation angle in outer
layers of flexural plate. The discrete values of fiber orientation angles
are used in method. Optimization results of simply supported plate
and multispan plate with uniformly distributed load are provided.
Results show that stiffness could be increased up to 20% by changing
wood fiber orientation angle in one or two outer layers.
Abstract: Many experimental results suggest that more precise
spike timing is significant in neural information processing. We
construct a self-organization model using the spatiotemporal patterns,
where Spike-Timing Dependent Plasticity (STDP) tunes the
conduction delays between neurons. We show that the fluctuation of
conduction delays causes globally continuous and locally distributed
firing patterns through the self-organization.
Abstract: Scheduling of diversified service requests in
distributed computing is a critical design issue. Cloud is a type of
parallel and distributed system consisting of a collection of
interconnected and virtual computers. It is not only the clusters and
grid but also it comprises of next generation data centers. The paper
proposes an initial heuristic algorithm to apply modified ant colony
optimization approach for the diversified service allocation and
scheduling mechanism in cloud paradigm. The proposed optimization
method is aimed to minimize the scheduling throughput to service all
the diversified requests according to the different resource allocator
available under cloud computing environment.
Abstract: Decrease in hardware costs and advances in computer
networking technologies have led to increased interest in the use of
large-scale parallel and distributed computing systems. One of the
biggest issues in such systems is the development of effective
techniques/algorithms for the distribution of the processes/load of a
parallel program on multiple hosts to achieve goal(s) such as
minimizing execution time, minimizing communication delays,
maximizing resource utilization and maximizing throughput.
Substantive research using queuing analysis and assuming job
arrivals following a Poisson pattern, have shown that in a multi-host
system the probability of one of the hosts being idle while other host
has multiple jobs queued up can be very high. Such imbalances in
system load suggest that performance can be improved by either
transferring jobs from the currently heavily loaded hosts to the lightly
loaded ones or distributing load evenly/fairly among the hosts .The
algorithms known as load balancing algorithms, helps to achieve the
above said goal(s). These algorithms come into two basic categories -
static and dynamic. Whereas static load balancing algorithms (SLB)
take decisions regarding assignment of tasks to processors based on
the average estimated values of process execution times and
communication delays at compile time, Dynamic load balancing
algorithms (DLB) are adaptive to changing situations and take
decisions at run time.
The objective of this paper work is to identify qualitative
parameters for the comparison of above said algorithms. In future this
work can be extended to develop an experimental environment to
study these Load balancing algorithms based on comparative
parameters quantitatively.
Abstract: Traditional multivariate control charts assume that measurement from manufacturing processes follows a multivariate normal distribution. However, this assumption may not hold or may be difficult to verify because not all the measurement from manufacturing processes are normal distributed in practice. This study develops a new multivariate control chart for monitoring the processes with non-normal data. We propose a mechanism based on integrating the one-class classification method and the adaptive technique. The adaptive technique is used to improve the sensitivity to small shift on one-class classification in statistical process control. In addition, this design provides an easy way to allocate the value of type I error so it is easier to be implemented. Finally, the simulation study and the real data from industry are used to demonstrate the effectiveness of the propose control charts.
Abstract: This paper proposes a novel solution for optimizing
the size and communication overhead of a distributed multiagent
system without compromising the performance. The proposed approach
addresses the challenges of scalability especially when the
multiagent system is large. A modified spectral clustering technique
is used to partition a large network into logically related clusters.
Agents are assigned to monitor dedicated clusters rather than monitor
each device or node. The proposed scalable multiagent system is
implemented using JADE (Java Agent Development Environment)
for a large power system. The performance of the proposed topologyindependent
decentralized multiagent system and the scalable multiagent
system is compared by comprehensively simulating different
fault scenarios. The time taken for reconfiguration, the overall computational
complexity, and the communication overhead incurred are
computed. The results of these simulations show that the proposed
scalable multiagent system uses fewer agents efficiently, makes faster
decisions to reconfigure when a fault occurs, and incurs significantly
less communication overhead.
Abstract: In this paper, based on the coupled-mode and carrier rate equations, derivation of a dynamic model and numerically analysis of a MQW chirped DFB-SOA all-optical flip-flop is done precisely. We have analyzed the effects of strains of QW and MQW and cross phase modulation (XPM) on the dynamic response, and rise and fall times of the DFB-SOA all optical flip flop. We have shown that strained MQW active region in under an optimized condition into a DFB-SOA with chirped grating can improve the switching ON speed limitation in such a of the device, significantly while the fall time is increased. The values of the rise times for such an all optical flip-flop, are obtained in an optimized condition, areas tr=255ps.
Abstract: The main mission of Ezilla is to provide a friendly
interface to access the virtual machine and quickly deploy the high
performance computing environment. Ezilla has been developed by
Pervasive Computing Team at National Center for High-performance
Computing (NCHC). Ezilla integrates the Cloud middleware,
virtualization technology, and Web-based Operating System (WebOS)
to form a virtual computer in distributed computing environment. In
order to upgrade the dataset and speedup, we proposed the sensor
observation system to deal with a huge amount of data in the
Cassandra database. The sensor observation system is based on the
Ezilla to store sensor raw data into distributed database. We adopt the
Ezilla Cloud service to create virtual machines and login into virtual
machine to deploy the sensor observation system. Integrating the
sensor observation system with Ezilla is to quickly deploy experiment
environment and access a huge amount of data with distributed
database that support the replication mechanism to protect the data
security.
Abstract: The aim of this paper is to explore the security issues
that significantly affect the performance of Mobile Adhoc Networks
(MANET)and limit the services provided to their intended users. The
MANETs are more vulnerable to Distributed Denial of Service
attacks (DDoS) because of their properties like shared medium,
dynamic topologies etc. A DDoS attack is a coordinated attempt
made by malicious users to flood the victim network with the large
amount of data such that the resources of the victim network are
exhausted resulting in the deterioration of the network performance.
This paper highlights the effects of different types of DDoS attacks
in MANETs and categorizes them according to their behavior.
Abstract: The primary education system in Indonesia involved the community recognized as the school committee, to take a part in the process of achieving the quality of education via the school facility performance, the low level of school committee involvement in the education system has become the issue in the development of education and reflected to the quality of education. This paper will discuss the conceptual framework and methodology for the performance of school committees within the management of school facilities in Batubara district of Indonesia. The concepts of Community based Facility Management (CbFM) and Logometrix are used as a basis to measure the school committee performance in order to address the needs of quality school management. The data will be taken from questionnaires distributed for those who work and use school facilities spread over seven sub district of Batubara, Indonesia. The result of this study is expected to provide a guide for evaluating the performance of existing school committee in improving the quality of education in Indonesia.
Abstract: In the real application of active control systems to
mitigate the response of structures subjected to sever external
excitations such as earthquake and wind induced vibrations, since the
capacity of actuators is limited then the actuators saturate. Hence, in
designing controllers for linear and nonlinear structures under sever
earthquakes, the actuator saturation should be considered as a
constraint. In this paper optimal design of active controllers for
nonlinear structures by considering the actuator saturation has been
studied. To this end a method has been proposed based on defining
an optimization problem which considers the minimizing of the
maximum displacement of the structure as objective when a limited
capacity for actuator has been used as a constraint in optimization
problem. To evaluate the effectiveness of the proposed method, a
single degree of freedom (SDF) structure with a bilinear hysteretic
behavior has been simulated under a white noise ground acceleration
of different amplitudes. Active tendon control mechanism, comprised
of pre-stressed tendons and an actuator, and extended nonlinear
Newmark method based instantaneous optimal control algorithm
have been used as active control mechanism and algorithm. To
enhance the efficiency of the controllers, the weights corresponding
to displacement, velocity, acceleration and control force in the
performance index have been found by using the Distributed Genetic
Algorithm (DGA). According to the results it has been concluded
that the proposed method has been effective in considering the
actuator saturation in designing optimal controllers for nonlinear
frames. Also it has been shown that the actuator capacity and the
average value of required control force are two important factors in
designing nonlinear controllers for considering the actuator
saturation.
Abstract: Localization is one of the critical issues in the field of
robot navigation. With an accurate estimate of the robot pose, robots will be capable of navigating in the environment autonomously and efficiently. In this paper, a hybrid Distributed Vision System (DVS)
for robot localization is presented. The presented approach integrates
odometry data from robot and images captured from overhead cameras
installed in the environment to help reduce possibilities of fail
localization due to effects of illumination, encoder accumulated errors,
and low quality range data. An odometry-based motion model is applied to predict robot poses, and robot images captured by overhead
cameras are then used to update pose estimates with HSV histogram-based measurement model. Experiment results show the
presented approach could localize robots in a global world coordinate system with localization errors within 100mm.
Abstract: Designing a simulated system and training it to optimize its tasks in simulated environment helps the designers to avoid problems that may appear when designing the system directly in real world. These problems are: time consuming, high cost, high errors percentage and low efficiency and accuracy of the system. The proposed system will investigate and improve the efficiency and accuracy of a simulated robot to choose correct behavior to perform its task. In this paper, machine learning, which uses genetic algorithm, is adopted. This type of machine learning is called genetic-based machine learning in which a distributed classifier system is used to improve the efficiency and accuracy of the robot. Consequently, it helps the robot to achieve optimal action.
Abstract: The scientific achievements coming from molecular
biology depend greatly on the capability of computational
applications to analyze the laboratorial results. A comprehensive
analysis of an experiment requires typically the simultaneous study
of the obtained dataset with data that is available in several distinct
public databases. Nevertheless, developing a centralized access to
these distributed databases rises up a set of challenges such as: what
is the best integration strategy, how to solve nomenclature clashes,
how to solve database overlapping data and how to deal with huge
datasets. In this paper we present GeNS, a system that uses a simple and yet innovative approach to address several biological data integration issues. Compared with existing systems, the main
advantages of GeNS are related to its maintenance simplicity and to its coverage and scalability, in terms of number of supported
databases and data types. To support our claims we present the current use of GeNS in two concrete applications. GeNS currently contains more than 140 million of biological relations and it can be
publicly downloaded or remotely access through SOAP web services.