Abstract: The importance of using mother tongue and
translation in foreign language classrooms cannot be ignored and
translation can be utilized as a method in English Language Teaching
courses. There exist researches advocating or objecting to the use of
translation in foreign language learning but they all have a point in
common: Translation should be used as an aid to teaching, not an end
in itself. In this research, prospective English language teachers’
opinions about translation use and use of mother tongue in foreign
language teaching are investigated and according to the findings,
some explanations and recommendations are made.
Abstract: Guided by the theory of learning styles, this study is
based on the development of a multimedia learning application for
students with mastery learning style. The learning material was
developed by applying a graduated difficulty learning strategy.
Algebra was chosen as the learning topic for this application. The
effectiveness of this application in helping students learn is measured
by giving a pre- and post-test. The result shows that students who
learn using the learning material that matches their preferred learning
style perform better than the students with a non-personalized
learning material.
Abstract: There are a variety of reference current identification
methods, for the shunt active power filter (SAPF), such as the
instantaneous active and reactive power, the instantaneous active and
reactive current and the synchronous detection method are evaluated
and compared under ideal, non sinusoidal and unbalanced voltage
conditions. The SAPF performances, for the investigated
identification methods, are tested for a non linear load. The
simulation results, using Matlab Power System Blockset Toolbox
from a complete structure, are presented and discussed.
Abstract: Powder metallurgy (P/M) is the only economic way to
produce porous parts/products. P/M can produce near net shape parts
hence reduces wastage of raw material and energy, avoids various
machining operations. The most vital use of P/M is in production of
metallic filters and self lubricating bush bearings and siding surfaces.
The porosity of the part can be controlled by varying compaction
pressure, sintering temperature and composition of metal powder
mix. The present work is aimed for experimental analysis of friction
and wear properties of self lubricating copper and tin bush bearing.
Experimental results confirm that wear rate of sintered component
is lesser for components having 10% tin by weight percentage. Wear
rate increases for high tin percentage (experimented for 20% tin and
30% tin) at same sintering temperature. Experimental results also
confirms that wear rate of sintered component is also dependent on
sintering temperature, soaking period, composition of the preform,
compacting pressure, powder particle shape and size.
Interfacial friction between die and punch, between inter powder
particles, between die face and powder particle depends on
compaction pressure, powder particle size and shape, size and shape
of component which decides size & shape of die & punch, material of
die & punch and material of powder particles.
Abstract: Many problems in science and engineering field require
the solution of shifted linear systems with multiple right hand
sides and multiple shifts. To solve such systems efficiently, the
implicitly restarted global GMRES algorithm is extended in this
paper. However, the shift invariant property could no longer hold over
the augmented global Krylov subspace due to adding the harmonic
Ritz matrices. To remedy this situation, we enforce the collinearity
condition on the shifted system and propose shift implicitly restarted
global GMRES. The new method not only improves the convergence
but also has a potential to simultaneously compute approximate
solution for the shifted systems using only as many matrix vector
multiplications as the solution of the seed system requires. In
addition, some numerical experiments also confirm the effectiveness
of our method.
Abstract: This research work is concerned with the life cycle
assessment (LCA) of an expressway, as well as its infrastructure, in
Thailand. The life cycle of an expressway encompasses the raw
material acquisition phase, the construction phase, the use or service
phase, the rehabilitation phase, and finally the demolition and
disposal phase. The LCA in this research was carried out using CML
baseline 2000 and in accordance with the ISO 14040 standard. A
functional unit refers to transportation of one person over one
kilometer of a 3-lane expressway with a 50-year lifetime. This
research has revealed that the construction phase produced the largest
proportion of the environmental impact (81.46%), followed by the
service, rehabilitation, demolition and disposal phases and
transportation at 11.97%, 3.72% 0.33% and 2.52%, respectively. For
the expressway under study, the total carbon footprint over its
lifetime is equivalent to 245,639 tons CO2-eq per 1 kilometer
functional unit, with the phases of construction, service,
rehabilitation, demolition and disposal and transportation
contributing 153,690; 73,773; 3693, 755 and 13,728 tons CO2-eq,
respectively. The findings could be adopted as a benchmark against
which the environmental impacts of future similar projects can be
measured.
Abstract: This paper proposes the designing direct adaptive
neural controller to apply for a class of a nonlinear pendulum
dynamic system. The radial basis function (RBF) neural adaptive
controller is robust in presence of external and internal uncertainties.
Both the effectiveness of the controller and robustness against
disturbances are importance of this paper. The simulation results
show the promising performance of the proposed controller.
Abstract: The use of mobile phones is growing tremendously all
over the world. In Tanzania there are a number of operators licensed
by Tanzania Communications Regulatory Authority (TCRA) aiming
at attracting customers into their networks. So far
telecommunications market competition has been very stiff. Various
measures are being taken by mobile operators to survive in the
market. Such measure include introducing of different air time
bundles on daily, weekly and monthly at lower tariffs. Other
measures include the introduction of normal tariff, tourist package
and one network. Despite of all these strategies, there is a dynamic
competition in the market which needs to be explored. Some
influences which attract customers to choose a certain mobile
operator are of particular interest. This paper is investigating if the
network effects and Quality of Services (QoS) influence mobile
customers in selection of their mobile network operators. Seventy
seven students from high learning institutions in Dodoma
Municipality in Tanzania participated in responding to prepared
questionnaires. The data was analyzed using Statistical Package for
Social Science (SPSS) Software. The results indicate that, network
coverage does influence customers in selection of mobile operators.
In addition, this paper proposes further research in some areas
especially where the study came up with different findings from what
the theory has in place.
Abstract: Applied industrial engineering is concerned with
imparting employable skills to improve the productivity for current
situation of products and services. The purpose of this case study is to
present the results of an initial research study conducted to identify
the desired professional characteristics of an industrial engineer with
an undergraduate degree and the emerging topic areas that should be
incorporated into the curriculum to prepare industrial engineering
(IE) graduates for the future workforce. Conclusions and
recommendations for applied industrial engineering syllabus have
been gathered and reported below. A two-pronged approach was
taken which included a method of benchmarking by comparing the
applied industrial engineering curricula of various universities and an
industry survey to identify job market requirements. This
methodology produced an analysis of the changing nature of
industrial engineering from learning to practical education. A
curriculum study for engineering is a relatively unexplored area of
research in the Middle East, much less for applied industrial
engineering. This work is an effort to bridge the gap between
theoretical study in the classroom and the real world work
applications in the industrial and service sectors.
Abstract: Dissimilar joining of Titanium and Aluminum thin
sheets has potential applications in aerospace and automobile
industry which can reduce weight and cost and improve strength,
corrosion resistance and high temperature properties. However
successful welding of Titanium/Aluminium sheets is of challenge due
to differences in physical, chemical and metallurgical properties
between the two. This paper describes research results of Laser Beam
Welding (LBW) of Ti/Al thin sheets in which many researchers have
recently performed and critically reviewed from different
perspectives. Also some of notable works in the field of laser welding
with changes in mechanical properties, crack propagation, diffusion
behavior, chemical potential, interfacial reaction and the
microstructure are reported.
Abstract: Laser beam welding is an important joining technique
for Titanium/Aluminum thin sheet alloys with their increasing
applications in aerospace, aircraft, automotive, electronics and other
industries. In this paper the research and progress in laser welding of
Ti/Al thin sheets are critically reviewed from different perspectives.
Some important aspects such as microstructure, metallurgical defects
and mechanical properties in weldments are discussed. Also the
recent progress in laser welding of Ti/Al dissimilar thin sheets to
provide a basis for further research work is reported.
Abstract: Laser beam welding for the dissimilar Titanium and
Aluminium thin sheets is an emerging area which is having wider
applications in aerospace, aircraft, automotive, electronics and in
other industries due to its high speed, non-contact, precision with low
heat effects, least welding distortion, low labor costs and convenient
operation. Laser beam welding of dissimilar metal combinations are
increasingly demanded due to high energy densities with small fusion
and heat affected zones. Furthermore, no filler or electrode material is
required and contamination of weld is also very small. The present
study is to reviews the influence of different parameters like laser
power, welding speed, power density, beam diameter, focusing
distance and type of shielding gas on the mechanical properties of
dissimilar metal combinations like SS/Al, Cu/Al and Ti/Al focusing
on aluminum to other materials. Research findings reveal that Ti/Al
combination gives better metallurgical and mechanical properties
than other combinations such as SS/Al and Cu/Al.
Abstract: Artificial Immune Systems (AIS), inspired by the
human immune system, are algorithms and mechanisms which are
self-adaptive and self-learning classifiers capable of recognizing and
classifying by learning, long-term memory and association. Unlike
other human system inspired techniques like genetic algorithms and
neural networks, AIS includes a range of algorithms modeling on
different immune mechanism of the body. In this paper, a mechanism
of a human immune system based on apoptosis is adopted to build an
Intrusion Detection System (IDS) to protect computer networks.
Features are selected from network traffic using Fisher Score. Based
on the selected features, the record/connection is classified as either
an attack or normal traffic by the proposed methodology. Simulation
results demonstrates that the proposed AIS based on apoptosis
performs better than existing AIS for intrusion detection.
Abstract: The primary purpose of this paper is to explain the
impact of successful classroom management on the academic
achievements of students, the importance of positive relationship
between teacher and students, among students, between teacher and
parents. Effective communication plays an important role to
encourage students study hard and learn materials which are covered
by the teacher in the class. Friendly relationships among students
other than their preferred friends help them to have team working and
be socialized. In addition, a well-organized classroom arrangement
enhances students learning. As the consequence of successful
classroom management students should feel responsibility and need
to feel it. The one who is responsible to provide a comfortable
environment and help students learn is the manager of the classroom
who is named Teacher.
Abstract: We have experimentally demonstrated bright-dark
pulses in a nonlinear polarization rotation (NPR) based mode-locked
Erbium-doped fiber laser (EDFL) with a long cavity configuration.
Bright–dark pulses could be achieved when the laser works in the
passively mode-locking regime and the net group velocity dispersion
is quite anomalous. The EDFL starts to generate a bright pulse train
with degenerated dark pulse at the mode-locking threshold pump
power of 35.09 mW by manipulating the polarization states of the
laser oscillation modes using a polarization controller (PC). A split
bright–dark pulse is generated when further increasing the pump
power up to 37.95 mW. Stable bright pulses with no obvious
evidence of a dark pulse can also be generated when further adjusting
PC and increasing the pump power up to 52.19 mW. At higher pump
power of 54.96 mW, a new form of bright-dark pulse emission was
successfully identified with the repetition rate of 29 kHz. The bright
and dark pulses have a duration of 795.5 ns and 640 ns, respectively.
Abstract: City shrinkage is one of the thorny problems that many
European cities have to face with nowadays. It is mainly expressed as
the decrease of population in these cities. Eastern Germany is one of
the pioneers of European shrinking cities with long shrinking history.
The paper selects one representative shrinking city Halle (Saale) in
eastern Germany as research objective, collecting and investigating
nearly 20 years (1993-2010) municipal data after the reunification of
Germany. These data based on five dimensions, which are
demographic, economic, social, spatial and environmental and total 16
eligible variables. Factor Analysis is used to deal with these variables
in order to assess the most important factors affecting shrinking Halle.
The results show that there are three main factors determine the
shrinkage of Halle, respectively named “demographical and
economical factor”, “social stability factor”, and “city vitality factor”.
The three factors act at different time period of Halle’s shrinkage: from
1993 to 1997 the demographical and economical factor played an
important role; from 1997 to 2004 the social stability factor is
significant to city shrinkage; since 2005 city vitality factor determines
the shrinkage of Halle. In recent years, the shrinkage in Halle mitigates
that shows the sign of growing population. Thus the city Halle should
focus on attaching more importance on the city vitality factor to
prevent the city from shrinkage. Meanwhile, the city should possess a
positive perspective to shift the growth-oriented development to tap
the potential of shrinking cities. This method is expected to apply to
further research and other shrinking cities
Abstract: In regards to the energy sector in the modern period,
two points were raised. First is a vast and growing energy demand, and
second is an environmental impact associated with it. The enormous
consumption of fossil fuel to the mobile unit is leading to its rapid
depletion. Nuclear power is not the only problem. A modal shift that
utilizes personal transporters and independent power, in order to
realize a sustainable society, is very effective. The author proposes that
the world will continue to work on this. Energy of the future society,
innovation in battery technology and the use of natural energy is a big
key. And it is also necessary in order to save on energy consumption.
Abstract: From a perspective of moral education, this study has
examined the experiences of a group of college students who
volunteered in disaster areas after the magnitude 9.0 Earthquake,
which struck the Northeastern region of Japan in March, 2011. The
research, utilizing the method of grounded theory, has uncovered that
most of the students have gone through positive changes in their
development of moral and social characters, such as attaining deeper
sense of empathy and caring personalities. The study expresses, in
identifying the nature of those transformations, that the importance of
volunteer work should strongly be recognized by the colleges and
universities in Japan, in fulfilling their public responsibility of creating
and building learning communities that are responsible and caring.
Abstract: This paper reveals the interaction between hydrogen
and surface stress in austenitic stainless steel by X-ray diffraction
stress measurement and thermal desorption analysis before and after
being charged with hydrogen. The surface residual stress was varied
by surface finishing using several disc polishing agents. The obtained
results show that the residual stress near surface had a significant
effect on hydrogen absorption behavior, that is, tensile residual stress
promoted the hydrogen absorption and compressive one did opposite.
Also, hydrogen induced equi-biaxial stress and this stress has a linear
correlation with hydrogen content.
Abstract: Nitrogen-doped graphene quantum dots (N-GQDs)
were fabricated by microwave-assisted hydrothermal technique. The
optical properties of the N-GQDs were studied. The luminescence of
the N-GQDs can be tuned by varying the excitation wavelength.
Furthermore, two-photon luminescence of the N-GQDs excited by
near-infrared laser can be obtained. It is shown that N-doping play a
key role on two-photon luminescence. The N-GQDs are expected to
find application in biological applications including bioimaging and
sensing.