Abstract: The Minimum Vertex Cover (MVC) problem is a classic
graph optimization NP - complete problem. In this paper a competent
algorithm, called Vertex Support Algorithm (VSA), is designed to
find the smallest vertex cover of a graph. The VSA is tested on a
large number of random graphs and DIMACS benchmark graphs.
Comparative study of this algorithm with the other existing methods
has been carried out. Extensive simulation results show that the VSA
can yield better solutions than other existing algorithms found in the
literature for solving the minimum vertex cover problem.
Abstract: Computer based geostatistical methods can offer effective data analysis possibilities for agricultural areas by using
vectorial data and their objective informations. These methods will help to detect the spatial changes on different locations of the large
agricultural lands, which will lead to effective fertilization for optimal yield with reduced environmental pollution. In this study, topsoil (0-20 cm) and subsoil (20-40 cm) samples were taken from a
sugar beet field by 20 x 20 m grids. Plant samples were also collected
from the same plots. Some physical and chemical analyses for these
samples were made by routine methods. According to derived variation coefficients, topsoil organic matter (OM) distribution was more than subsoil OM distribution. The highest C.V. value of
17.79% was found for topsoil OM. The data were analyzed
comparatively according to kriging methods which are also used
widely in geostatistic. Several interpolation methods (Ordinary,Simple and Universal) and semivariogram models (Spherical,
Exponential and Gaussian) were tested in order to choose the suitable
methods. Average standard deviations of values estimated by simple
kriging interpolation method were less than average standard
deviations (topsoil OM ± 0.48, N ± 0.37, subsoil OM ± 0.18) of measured values. The most suitable interpolation method was simple
kriging method and exponantial semivariogram model for topsoil,
whereas the best optimal interpolation method was simple kriging
method and spherical semivariogram model for subsoil. The results
also showed that these computer based geostatistical methods should
be tested and calibrated for different experimental conditions and semivariogram models.
Abstract: Wireless sensor networks is an emerging technology
that serves as environment monitors in many applications. Yet
these miniatures suffer from constrained resources in terms of
computation capabilities and energy resources. Limited energy
resource in these nodes demands an efficient consumption of that
resource either by developing the modules itself or by providing
an efficient communication protocols. This paper presents a
comprehensive summarization and a comparative study of the
available MAC protocols proposed for Wireless Sensor Networks
showing their capabilities and efficiency in terms of energy
consumption and delay guarantee.
Abstract: We report here, the results of molecular dynamics
simulation of p-doped (Ga-face)GaN over n-doped (Siface)(
0001)4H-SiC hetero-epitaxial material system with one-layer
each of Ga-flux and (Al-face)AlN, as the interface materials, in the
form of, the total Density of States (DOS). It is found that the total
DOS at the Fermi-level for the heavily p-doped (Ga-face)GaN and ndoped
(Si-face)4H-SiC hetero-epitaxial system, with one layer of
(Al-face)AlN as the interface material, is comparatively higher than
that of the various cases studied, indicating that there could be good
vertical conduction across the (Ga-face)GaN over (Si-face)(0001)4HSiC
hetero-epitaxial material system.
Abstract: In this article, we propose a methodology for the
characterization of the suspended matter along Algiers-s bay. An
approach by multi layers perceptron (MLP) with training by back
propagation of the gradient optimized by the algorithm of Levenberg
Marquardt (LM) is used. The accent was put on the choice of the
components of the base of training where a comparative study made
for four methods: Random and three alternatives of classification by
K-Means. The samples are taken from suspended matter image,
obtained by analytical model based on polynomial regression by
taking account of in situ measurements. The mask which selects the
zone of interest (water in our case) was carried out by using a multi
spectral classification by ISODATA algorithm. To improve the
result of classification, a cleaning of this mask was carried out using
the tools of mathematical morphology. The results of this study
presented in the forms of curves, tables and of images show the
founded good of our methodology.
Abstract: The two agro-ecological zones became the focus of
the study because of violent nature of the incessant conflict in the
zones. The available register of farmers association was the sampling
frame work where ten percent (61) farmers per state were randomly
sampled. Data were collected and analysed using z-test. The research
findings revealed tree crops and grains production enterprises ranked
higher in Osun (rain fed zones) and Taraba states (savannah zones)
respectively. Osun state entrepreneur felt the effect of the conflict on
their enterprises more than Tarba state. The reasons adduced for
severity of the conflict on enterprises are majority (77.0%) migrated
and (75.5%) of them were not allowed to enter their farms during and
when conflict deescalated unlike situation in Taraba state. The
different in enterprises production level between the two agroecological
zone was statistically significant at p
Abstract: Experiments were carried out on the survival and growth of Rasbora daniconius, Puntius ticto and Puntius conchonius. The motivation of the study was to obtain information for growing the fish on a commercial scale for their use as biological control agents against mosquito larvae. The effects of temperature, total hardness, DO, pH and feed on the growth of fish were also investigated. Excessive value of total hardness was found because very rich calcium ion is present in Chitrakoot area. There was significant increases in growth rates of fish as temperature was increased from 280C to 300C. Further increases in temperature up to 320C, did not further affect growth. The positive and highly significant correlations 0.991488, 0.9581 and 0.9935 were found between length and weight of P. ticto, P. conchonius and R. daniconius respectively. The regression was significant at 5% level of probability.
Abstract: There are various solutions for improving existing overhead line systems with the general purpose of increasing their limited capacity. The capacity reserve of the existing overhead lines is an important problem that must be considered from different aspects. The paper contains a comparative analysis of the mechanical and thermal limitations of an existing overhead line based on certain calculation conditions characterizing the examined variants. The methodology of the proposed estimation of the permissible conductor temperature and maximum load current is described in detail. The transmission line model consists of specific information of an existing overhead line of the Latvian power network. The main purpose of the simulation tasks is to find an additional capacity reserve by using accurate mathematical models. The results of the obtained data are presented.
Abstract: Advertising today has already become an integral part
of human life as a building block of the consumer community. A
component of the value chain of the media, advertising sector is
struggling increasingly harder to find new methods to reach
consumers. The tendency towards experimental marketing practices
is increasing day by day, especially to divert consumers from the idea
“They are selling something to me.” It is therefore considered a good
idea to investigate the trust in ad media of consumers, who are today
exposed to a great bulk of information from advertising sector.
In this study, the current value of ad media for the young
consumer will be investigated. Data on various ad media reliability
will be comparatively analyzed and young consumers will be traced
by including university students in the study. In this research, which
will be performed on students studying at the Selçuk University
(Turkey) by random sampling method, data will be obtained by
survey technique and evaluated by a statistical analysis.
Abstract: Al-Murabahah is an Islamic financing facility used in
asset financing, the profit rate of the contract is determined by
components which are also being used in the conventional banking.
Such are cost of fund, overhead cost, risk premium cost and bank-s
profit margin. At the same time, the profit rate determined by Islamic
banking system also refers to Inter-Bank Offered Rate (LIBOR) in
London as a benchmark. This practice has risen arguments among
Muslim scholars in term of its validity of the contract; whether the
contract maintains the Shariah compliance or not. This paper aims to
explore the view of Shariah towards the above components practiced
by Islamic Banking in determining the profit rate of al-murabahah
asset financing in Malaysia. This is a comparative research which
applied the views of Muslim scholars from all major mazahibs in
Islamic jurisprudence and examined the practices by Islamic banks in
Malaysia for the above components. The study found that the shariah
accepts all the components with conditions. The cost of fund is
accepted as a portion of al-mudarabah-s profit, the overhead cost is
accepted as a cost of product, risk premium cost consist of business
risk and mitigation risk are accepted through the concept of alta-awun
and bank-s profit margin is accepted as a right of bank after
venturing in risky investment.
Abstract: The environmental performance of rapeseed oil (RO)
and rapeseed methyl ester(RME) from winter rape as fuels produced
in Romanian agroclimate is analyzed in this paper. The proposed
methodology is life cycle assessment (LCA) and takes into
consideration the influence of grain production and agroclimatic
conditions. This study shows favorable results first for RO and then
for RME. When compared to diesel fuel, both studied biofuels show
better results in the following impact categories: Abiotic depletion
potential (ADP), Ozone layer depletion (ODP) and Photochemical
ozone creation potential (POCP).Furthermore, the environmental
performance of the two biofuels studied can be improved by
changing the type of fertilizer used and also by using biofuels instead
of diesel in the field works.
Abstract: This paper presents a computational study of the separated flow in a planer asymmetric diffuser. The steady RANS equations for turbulent incompressible fluid flow and six turbulence closures are used in the present study. The commercial software code, FLUENT 6.3.26, was used for solving the set of governing equations using various turbulence models. Five of the used turbulence models are available directly in the code while the v2-f turbulence model was implemented via User Defined Scalars (UDS) and User Defined Functions (UDF). A series of computational analysis is performed to assess the performance of turbulence models at different grid density. The results show that the standard k-ω, SST k-ω and v2-f models clearly performed better than other models when an adverse pressure gradient was present. The RSM model shows an acceptable agreement with the velocity and turbulent kinetic energy profiles but it failed to predict the location of separation and attachment points. The standard k-ε and the low-Re k- ε delivered very poor results.
Abstract: Asynchronous Transfer Mode (ATM) is widely used
in telecommunications systems to send data, video and voice at a
very high speed. In ATM network optimizing the bandwidth through
dynamic routing is an important consideration. Previous research
work shows that traditional optimization heuristics result in suboptimal
solution. In this paper we have explored non-traditional
optimization technique. We propose comparison of two such
algorithms - Genetic Algorithm (GA) and Tabu search (TS), based on
non-traditional Optimization approach, for solving the dynamic
routing problem in ATM networks which in return will optimize the
bandwidth. The optimized bandwidth could mean that some
attractive business applications would become feasible such as high
speed LAN interconnection, teleconferencing etc. We have also
performed a comparative study of the selection mechanisms in GA
and listed the best selection mechanism and a new initialization
technique which improves the efficiency of the GA.
Abstract: The use of Quantum dots is a promising emerging
Technology for implementing digital system at the nano level. It is
effecient for attractive features such as faster speed , smaller size and
low power consumption than transistor technology. In this paper,
various Combinational and sequential logical structures - HALF
ADDER, SR Latch and Flip-Flop, D Flip-Flop preceding NAND,
NOR, XOR,XNOR are discussed based on QCA design, with
comparatively less number of cells and area. By applying these
layouts, the hardware requirements for a QCA design can be reduced.
These structures are designed and simulated using QCA Designer
Tool. By taking full advantage of the unique features of this
technology, we are able to create complete circuits on a single layer
of QCA. Such Devices are expected to function with ultra low
power Consumption and very high speeds.
Abstract: In this study, a fuzzy similarity approach for Arabic web pages classification is presented. The approach uses a fuzzy term-category relation by manipulating membership degree for the training data and the degree value for a test web page. Six measures are used and compared in this study. These measures include: Einstein, Algebraic, Hamacher, MinMax, Special case fuzzy and Bounded Difference approaches. These measures are applied and compared using 50 different Arabic web-pages. Einstein measure was gave best performance among the other measures. An analysis of these measures and concluding remarks are drawn in this study.
Abstract: An Advance Driver Assistance System (ADAS) is a computer system on board a vehicle which is used to reduce the risk of vehicular accidents by monitoring factors relating to the driver, vehicle and environment and taking some action when a risk is identified. Much work has been done on assessing vehicle and environmental state but there is still comparatively little published work that tackles the problem of driver state. Visual attention is one such driver state. In fact, some researchers claim that lack of attention is the main cause of accidents as factors such as fatigue, alcohol or drug use, distraction and speeding all impair the driver-s capacity to pay attention to the vehicle and road conditions [1]. This seems to imply that the main cause of accidents is inappropriate driver behaviour in cases where the driver is not giving full attention while driving. The work presented in this paper proposes an ADAS system which uses an image based template matching algorithm to detect if a driver is failing to observe particular windscreen cells. This is achieved by dividing the windscreen into 24 uniform cells (4 rows of 6 columns) and matching video images of the driver-s left eye with eye-gesture templates drawn from images of the driver looking at the centre of each windscreen cell. The main contribution of this paper is to assess the accuracy of this approach using Receiver Operating Characteristic analysis. The results of our evaluation give a sensitivity value of 84.3% and a specificity value of 85.0% for the eye-gesture template approach indicating that it may be useful for driver point of regard determinations.
Abstract: We demonstrate the synthesis of intermediary views
within a sequence of color encoded, materials discriminating, X-ray
images that exhibit animated depth in a visual display. During the
image acquisition process, the requirement for a linear X-ray detector
array is replaced by synthetic image. Scale Invariant Feature
Transform, SIFT, in combination with material segmented morphing
is employed to produce synthetic imagery. A quantitative analysis of
the feature matching performance of the SIFT is presented along with
a comparative study of the synthetic imagery. We show that the total
number of matches produced by SIFT reduces as the angular
separation between the generating views increases. This effect is
accompanied by an increase in the total number of synthetic pixel
errors. The trends observed are obtained from 15 different luggage
items. This programme of research is in collaboration with the UK
Home Office and the US Dept. of Homeland Security.
Abstract: In this study, the adhesion of ice to solid substrates
with different surface properties is compared. Clear ice, similar to
atmospheric in-flight icing encounters, is accreted on the different
substrates under controlled conditions. The ice adhesion behavior is
investigated by means of a dynamic vibration testing technique with
an electromagnetic shaker initiating ice de-bonding in the interface
between the substrate and the ice. The results of the experiments
reveal that the affinity for ice accretion is significantly influenced by
the water contact angle of the respective sample.
Abstract: Activity-Based Costing (ABC) which has become an important aspect of manufacturing/service organizations can be defined as a methodology that measures the cost and performance of activities, resources and cost objects. It can be considered as an alternative paradigm to traditional cost-based accounting systems. The objective of this paper is to illustrate an application of ABC method and to compare the results of ABC with traditional costing methods. The results of the application highlight the weak points of traditional costing methods and an S-Curve obtained is used to identify the undercosted and overcosted products of the firm.
Abstract: This study investigated the effect of cross sectional
geometry on sediment transport rate. The processes of sediment
transport are generally associated to environmental management,
such as pollution caused by the forming of suspended sediment in the
channel network of a watershed and preserving physical habitats and
native vegetations, and engineering applications, such as the
influence of sediment transport on hydraulic structures and flood
control design. Many equations have been proposed for computing
the sediment transport, the influence of many variables on sediment
transport has been understood; however, the effect of other variables
still requires further research. For open channel flow, sediment
transport capacity is recognized to be a function of friction slope,
flow velocity, grain size, grain roughness and form roughness, the
hydraulic radius of the bed section and the type and quantity of
vegetation cover. The effect of cross sectional geometry of the
channel on sediment transport is one of the variables that need
additional investigation. The width-depth ratio (W/d) is a
comparative indicator of the channel shape. The width is the total
distance across the channel and the depth is the mean depth of the
channel. The mean depth is best calculated as total cross-sectional
area divided by the top width. Channels with high W/d ratios tend to
be shallow and wide, while channels with low (W/d) ratios tend to be
narrow and deep. In this study, the effects of the width-depth ratio on
sediment transport was demonstrated theoretically by inserting the
shape factor in sediment continuity equation and analytically by
utilizing the field data sets for Yalobusha River. It was found by
utilizing the two approaches as a width-depth ratio increases the
sediment transport decreases.