Abstract: The use of power system stabilizers (PSSs) to damp
power system swing mode of oscillations is practical important. Our
purpose is to retune the power system stabilizer (PSS1A) parameters
in Unitrol D produced by ABB– was installed in 1995in Benghazi
North Power Plants (BNPPs) at General Electricity Company of
Libya (GECOL). The optimal values of the power system stabilizer
(PSS1A) parameters are determined off-line by a particle swarm
optimization technique (PSO). The objective is to damp the local and
inter-area modes of oscillations that occur following power system
disturbances. The retuned power system stabilizer (PSS1A) can cope
with large disturbance at different operating points and has enhanced
power system stability.
Abstract: Levan, an exopolysaccharide, was produced by
Microbacterium laevaniformans and its yield was characterized as a
function of concentrations of date syrup, sucrose and the fermentation
time. The optimum condition for levan production from sucrose was
at concentration of 20% sucrose for 48 h and for date syrup was 25%
for 48 h. The results show that an increase in fermentation time
caused a decrease in the levan production at all concentrations of date
syrup tested. Under these conditions after 48 h in sucrose medium,
levan production reached 48.9 g/L and for date syrup reached 10.48
g/L . The effect of pH on the yield of the purified levan was examined
and the optimum pH for levan production was determined to be 6.0.
Levan was composed mainly of fructose residues when analyzed by
TLC and FT-IR spectroscopy. Date syrup is a cheap substrate widely
available in Iran and has potential for levan production. The thermal
stability of levan was assessed by Thermo Gravimetric Analysis
(TGA) that revealed the onset of decomposition near to 49°C for the
levan produced from sucrose and 51°C for the levan from date syrup.
DSC results showed a single Tg at 98°C for levan produced from
sucrose and 206 °C for levan from date syrup.
Abstract: Non-viral gene carriers composed of biodegradable
polymers or lipids have been considered as a safer alternative for gene
carriers over viral vectors. We have developed multi-functional
nano-micelles for both drug and gene delivery application.
Polyethyleneimine (PEI) was modified by grafting stearic acid (SA)
and formulated to polymeric micelles (PEI-SA) with positive surface
charge for gene and drug delivery. Our results showed that PEI-SA
micelles provided high siRNA binding efficiency. In addition, siRNA
delivered by PEI-SA carriers also demonstrated significantly high
cellular uptake even in the presence of serum proteins. The
post-transcriptional gene silencing efficiency was greatly improved by
the polyplex formulated by 10k PEI-SA/siRNA. The amphiphilic
structure of PEI-SA micelles provided advantages for multifunctional
tasks; where the hydrophilic shell modified with cationic charges can
electrostatically interact with DNA or siRNA, and the hydrophobic
core can serve as payloads for hydrophobic drugs, making it a
promising multifunctional vehicle for both genetic and chemotherapy
application.
Abstract: Chaos and fractals are novel fields of physics and mathematics showing up a new way of universe viewpoint and creating many ideas to solve several present problems. In this paper, a novel algorithm based on the chaotic sequence generator with the highest ability to adapt and reach the global optima is proposed. The adaptive ability of proposal algorithm is flexible in 2 steps. The first one is a breadth-first search and the second one is a depth-first search. The proposal algorithm is examined by 2 functions, the Camel function and the Schaffer function. Furthermore, the proposal algorithm is applied to optimize training Multilayer Neural Networks.
Abstract: We aimed to investigate how can target and optimize
pulmonary delivery distribution by changing physicochemical
characteristics of instilled liquid.Therefore, we created a new liquids
group:
a. eligible for desired distribution within lung because of
assorted physicochemical characteristics
b. capable of being augmented with a broad range of
chemicals inertly
c. no interference on respiratory function
d. compatible with airway surface liquid
We developed forty types of new liquid,were composed of
Carboxymethylcellulose sodium,Glycerin and different types of
Polysorbates.Viscosity was measured using a Programmable
Rheometer and surface tension by KRUSS Tensiometer.We
subsequently examined the liquids and delivery protocols by simple
and branched glass capillary tube models of airways.Eventually,we
explored pulmonary distribution of liquids being augmented with
technetium-99m in mechanically ventilated rabbits.We used a single
head large field of view gamma camera.Kinematic viscosity between
0.265Stokes and 0.289Stokes,density between 1g/cm3 and 1.5g/cm3
and surface tension between 25dyn/cm and 35dyn/cm were the most
acceptable.
Abstract: In recent years, scanning probe atomic force
microscopy SPM AFM has gained acceptance over a wide spectrum
of research and science applications. Most fields focuses on physical,
chemical, biological while less attention is devoted to manufacturing
and machining aspects. The purpose of the current study is to assess
the possible implementation of the SPM AFM features and its
NanoScope software in general machining applications with special
attention to the tribological aspects of cutting tool. The surface
morphology of coated and uncoated as-received carbide inserts is
examined, analyzed, and characterized through the determination of
the appropriate scanning setting, the suitable data type imaging
techniques and the most representative data analysis parameters
using the MultiMode SPM AFM in contact mode. The NanoScope
operating software is used to capture realtime three data types
images: “Height", “Deflection" and “Friction". Three scan sizes are
independently performed: 2, 6, and 12 μm with a 2.5 μm vertical
range (Z). Offline mode analysis includes the determination of three
functional topographical parameters: surface “Roughness", power
spectral density “PSD" and “Section". The 12 μm scan size in
association with “Height" imaging is found efficient to capture every
tiny features and tribological aspects of the examined surface. Also,
“Friction" analysis is found to produce a comprehensive explanation
about the lateral characteristics of the scanned surface. Configuration
of many surface defects and drawbacks has been precisely detected
and analyzed.
Abstract: In the past few decades, researchers have witnessed a
paradigm shift in Human Resource Management-from individual
performance to organizational outcomes with the role of Human
resource (HR) managers becoming increasingly significant to the
organization. In such a context, it is important to examine HR
practices from a strategic perspective on the sustained competitive
advantage (SCA) of the organizations. The present study explores
how Indian organisations look at their human resources strategically
when faced with competitive environment. Also, it explores strategic
initiatives being taken to manage human resources within the
organisations and how these initiatives promote SCA in terms of
enhancing the overall customer-centric delivery of goods and
services.
Abstract: This study examines the possibility to apply the theory of multidimensional accounting (momentum accounting) in a Brazilian Navy-s Services Provider Military Organization (Organização Militar Prestadora de Serviços - OMPS). In general, the core of the said theory is the fact that Accounting does not recognize the inertia of transactions occurring in an entity, and that occur repeatedly in some cases, regardless of the implementation of new actions by its managers. The study evaluates the possibility of greater use of information recorded in the financial statements of the unit of analysis, within the strategic decisions of the organization. As a research strategy, we adopted the case study. The results infer that it is possible to use the theory in the context of a multidimensional OMPS, promoting useful information for decision-making and thereby contributing to the strengthening of the necessary alignment of its administration with the current desires of the Brazilian society.
Abstract: The proposed system identifies the species of the wood
using the textural features present in its barks. Each species of a wood
has its own unique patterns in its bark, which enabled the proposed
system to identify it accurately. Automatic wood recognition system
has not yet been well established mainly due to lack of research in this
area and the difficulty in obtaining the wood database. In our work, a
wood recognition system has been designed based on pre-processing
techniques, feature extraction and by correlating the features of those
wood species for their classification. Texture classification is a problem
that has been studied and tested using different methods due to its
valuable usage in various pattern recognition problems, such as wood
recognition, rock classification. The most popular technique used
for the textural classification is Gray-level Co-occurrence Matrices
(GLCM). The features from the enhanced images are thus extracted
using the GLCM is correlated, which determines the classification
between the various wood species. The result thus obtained shows a
high rate of recognition accuracy proving that the techniques used in
suitable to be implemented for commercial purposes.
Abstract: This study was carried out in Ankara, the capital city of Turkey, in order to determine how people living in the slums of Ankara benefit from educational equality. Within the scope of the research, interviews were made with 64 families whose children have been getting education from the primary schools of these parts and the data of the study was collected by the researcher. The results of the research demonstrate that the children getting education in the slums of Ankara can not experience educational equality and justice. The results of this study show that the opportunities of the schools in the slums of Ankara are very limited, so the individuals in these districts can not equally benefit from the education. The families are aware of the problem they are faced with. KeywordsDiscrimination, inequality, primary education, slums of Turkey.
Abstract: Due to the complex network architecture, the mobile
adhoc network-s multihop feature gives additional problems to the
users. When the traffic load at each node gets increased, the
additional contention due its traffic pattern might cause the nodes
which are close to destination to starve the nodes more away from the
destination and also the capacity of network is unable to satisfy the
total user-s demand which results in an unfairness problem. In this
paper, we propose to create an algorithm to compute the optimal
MAC-layer bandwidth assigned to each flow in the network. The
bottleneck links contention area determines the fair time share which
is necessary to calculate the maximum allowed transmission rate used
by each flow. To completely utilize the network resources, we
compute two optimal rates namely, the maximum fair share and
minimum fair share. We use the maximum fair share achieved in
order to limit the input rate of those flows which crosses the
bottleneck links contention area when the flows that are not allocated
to the optimal transmission rate and calculate the following highest
fair share. Through simulation results, we show that the proposed
protocol achieves improved fair share and throughput with reduced
delay.
Abstract: This paper presents a method for the optimal
allocation of Distributed generation in distribution systems. In this
paper, our aim would be optimal distributed generation allocation for
voltage profile improvement and loss reduction in distribution
network. Genetic Algorithm (GA) was used as the solving tool,
which referring two determined aim; the problem is defined and
objective function is introduced. Considering to fitness values
sensitivity in genetic algorithm process, there is needed to apply load
flow for decision-making. Load flow algorithm is combined
appropriately with GA, till access to acceptable results of this
operation. We used MATPOWER package for load flow algorithm
and composed it with our Genetic Algorithm. The suggested method
is programmed under MATLAB software and applied ETAP
software for evaluating of results correctness. It was implemented on
part of Tehran electricity distributing grid. The resulting operation of
this method on some testing system is illuminated improvement of
voltage profile and loss reduction indexes.
Abstract: Baseball is unique among other sports in Taiwan.
Baseball has become a “symbol of the Taiwanese spirit and Taiwan-s
national sport". Taiwan-s first professional sports league, the Chinese
Professional Baseball League (CPBL), was established in 1989.
Starters pitch many more innings over the course of a season and for
a century teams have made all their best pitchers starters. In this
study, we attempt to determine the on-field performance these
pitchers and which won the most CPBL games in 2009. We utilize
the discriminate analysis approach to solve the problem, examining
winning pitchers and their statistics, to reliably find the best starting
pitcher. The data employed in this paper include innings pitched (IP),
earned runs allowed (ERA) and walks plus hits per inning pitched
(WPHIP) provided by the official website of the CPBL. The results
show that Aaron Rakers was the best starting pitcher of the CPBL.
The top 10 CPBL starting pitchers won 14 games to 8 games in the
2009 season. Though Fisher Discriminant Analysis, predicted to top
10 CPBL starting pitchers probably won 20 games to 9 games, more
1 game to 7 games in actually counts in 2009 season.
Abstract: The objective of this research was to investigate the efficiency of the light emitting diode (LED) tube in various color lights used to lure the adult coconut hispine beetle. The research was conducted by setting the forward bias on LED tubes, and the next step was to test luminous efficacy and quantity of electricity used to power each LED tube in different color lights. Finally, the researcher examined the efficiency of each color-light LED tube to lure the adult coconut hispine beetle.
The results showed that the ultraviolet LED tubes had the most capacity to allure the adult coconut hispine beetles with the percentage of 82.92, followed by the blue LED tubes with the percentage of 59.76. Whereas the yellow, pink, red and warm white LED tubes had no influence to the adult coconut hispine beetles.
Abstract: This study proposes a materials procurement contracts
model to which the zero-cost collar option is applied for heading price
fluctuation risks in construction.The material contract model based on
the collar option that consists of the call option striking zone of the
construction company(the buyer) following the materials price
increase andthe put option striking zone of the material vendor(the
supplier) following a materials price decrease. This study first
determined the call option strike price Xc of the construction company
by a simple approach: it uses the predicted profit at the project starting
point and then determines the strike price of put option Xp that has an
identical option value, which completes the zero-cost material
contract.The analysis results indicate that the cost saving of the
construction company increased as Xc decreased. This was because the
critical level of the steel materials price increasewas set at a low level.
However, as Xc decreased, Xpof a put option that had an identical
option value gradually increased. Cost saving increased as Xc
decreased. However, as Xp gradually increased, the risk of loss from a
construction company increased as the steel materials price decreased.
Meanwhile, cost saving did not occur for the construction company,
because of volatility. This result originated in the zero-cost features of
the two-way contract of the collar option. In the case of the regular
one-way option, the transaction cost had to be subtracted from the cost
saving. The transaction cost originated from an option value that
fluctuated with the volatility. That is, the cost saving of the one-way
option was affected by the volatility. Meanwhile, even though the
collar option with zero transaction cost cut the connection between
volatility and cost saving, there was a risk of exercising the put option.
Abstract: This Paper proposes a new facial feature extraction approach, Wash-Hadamard Transform (WHT). This approach is based on correlation between local pixels of the face image. Its primary advantage is the simplicity of its computation. The paper compares the proposed approach, WHT, which was traditionally used in data compression with two other known approaches: the Principal Component Analysis (PCA) and the Discrete Cosine Transform (DCT) using the face database of Olivetti Research Laboratory (ORL). In spite of its simple computation, the proposed algorithm (WHT) gave very close results to those obtained by the PCA and DCT. This paper initiates the research into WHT and the family of frequency transforms and examines their suitability for feature extraction in face recognition applications.
Abstract: This study examines the issue of recommendation
sources from the perspectives of gender and consumers- perceived
risk, and validates a model for the antecedents of consumer online
purchases. The method of obtaining quantitative data was that of the
instrument of a survey questionnaire. Data were collected via
questionnaires from 396 undergraduate students aged 18-24, and a
multiple regression analysis was conducted to identify causal
relationships. Empirical findings established the link between
recommendation sources (word-of-mouth, advertising, and
recommendation systems) and the likelihood of making online
purchases and demonstrated the role of gender and perceived risk as
moderators in this context. The results showed that the effects of
word-of-mouth on online purchase intentions were stronger than those
of advertising and recommendation systems. In addition, female
consumers have less experience with online purchases, so they may be
more likely than males to refer to recommendations during the
decision-making process. The findings of the study will help
marketers to address the recommendation factor which influences
consumers- intention to purchase and to improve firm performances to
meet consumer needs.
Abstract: The study of interaction among the grain, moisture,
and the surrounding space (air) is key to understanding the graindrying
process. In Iran, rice (mostly Indica type) is dried by flat
bed type dryer until the final MC reaches to 6 to 8%. The
experiments were conducted to examine the effect of application of
discharge fan with different heights of paddy on the drying
efficiency. Experiments were designed based on two different
configurations of the drying methods; with and without discharge
fan with three different heights of paddy including; 5, 10, and 15
cm. The humid heated air will be going out immediately by the
suction of discharge fan. The drying time is established upon the
average final MC to achieve about 8%. To save energy and reduce
the drying time, the distribution of temperature between layers
should be fast and uniform with minimum difference; otherwise
the difference of MC gradient between layers will be high and will
induce grain breakage. The difference of final MC between layers
in the two methods was 48-73%. The steady state of temperature
between the two methods has saved time in the range of 10-20%,
and the efficiency of temperature distribution increased 17-26% by
the use of discharge fan.
Abstract: Coverage is one of the main research interests in wireless sensor networks (WSN), it is used to determine the quality of service (QoS) of the networks. Therefore this paper aims to review the common strategies use in solving coverage problem in WSN. The strategies studied are used during deployment phase where the coverage is calculated based on the placement of the sensors on the region of interest (ROI). The strategies reviewed are categorized into three groups based on the approaches used, namely; force based, grid based or computational geometry based approach.
Abstract: This research details a Computational Fluid Dynamics (CFD) approach to model fluid flow in a journal bearing with 8 equispaced semi-circular axial grooves. Water is used as the lubricant and is fed from one end of the bearing to the other, under pressure. The geometry of the bearing is modeled using a commercially available modeling software GAMBIT and the flow analysis is performed using a dedicated CFD analysis software FLUENT. The pressure distribution in the bearing clearance is obtained from FLUENT for various whirl ratios and is used to calculate the hydrodynamic force components in the radial and tangential direction of the bearing. These values along with the various whirl speeds can be used to do a regression analysis to determine the stiffness and damping coefficients. The values obtained are then compared with the stiffness and damping coefficients of a 3 Axial groove water lubricated journal bearing and those obtained from a FORTRAN code for a similar bearing.