Abstract: The purpose of this research aims to discover the
knowledge for analysis student motivation behavior on e-Learning
based on Data Mining Techniques, in case of the Information
Technology for Communication and Learning Course at Suan
Sunandha Rajabhat University. The data mining techniques was
applied in this research including association rules, classification
techniques. The results showed that using data mining technique can
indicate the important variables that influence the student motivation
behavior on e-Learning.
Abstract: The potential of entomopathogenic nematodes in suppressing T. squalida population on cauliflower from transplanting to harvest was evaluated. Significant reductions in plant infestation percentage and population density (/m2) were recorded throughout the plantation seasons, 2011 and 2012 before and after spraying the plants. The percent reduction in numbers/m2 was the highest in March for the treatments with Heterorhabditis indica Behera and Heterorhabditis bacteriophora Giza during the plantation season 2011, while at the plantation season 2012, the reduction in population density was the highest in January for Heterorhabditis Indica Behera and in February for H . bacteriophora Giza treatments. In a comparison test with conventional insecticides Hostathion and Lannate, there were no significant differences in control measures resulting from treatments with H. indica Behera, H. bacteriophora Giza and Lannate. At the plantation season is 2012. Also, the treatments reduced the economic threshold of T. squalida on cauliflower in this experiment as compared with before and after spraying with both the two entomopathogenic nematodes at both seasons 2011 and 2012. This means an increase in the marketability of heads harvested as a consequence of monthly treatments.
Abstract: Over the past several years, there has been a
considerable amount of research within the field of Quality of
Service (QoS) support for distributed multimedia systems. One of the
key issues in providing end-to-end QoS guarantees in packet
networks is determining a feasible path that satisfies a number of
QoS constraints. The problem of finding a feasible path is NPComplete
if number of constraints is more than two and cannot be
exactly solved in polynomial time. We proposed Feasible Path
Selection Algorithm (FPSA) that addresses issues with pertain to
finding a feasible path subject to delay and cost constraints and it
offers higher success rate in finding feasible paths.
Abstract: This paper presents an on-going research work on the
implementation of feature-based machining via macro programming.
Repetitive machining features such as holes, slots, pockets etc can
readily be encapsulated in macros. Each macro consists of methods
on how to machine the shape as defined by the feature. The macro
programming technique comprises of a main program and
subprograms. The main program allows user to select several
subprograms that contain features and define their important
parameters. With macros, complex machining routines can be
implemented easily and no post processor is required. A case study
on machining of a part that comprised of planar face, hole and pocket
features using the macro programming technique was carried out. It
is envisaged that the macro programming technique can be extended
to other feature-based machining fields such as the newly developed
STEP-NC domain.
Abstract: The rapid development of the BlackBerry games industry and its development goals were not just for entertainment, but also used for educational of students interactively. Unfortunately the development of adaptive educational games on BlackBerry in Indonesian language that interesting and entertaining for learning process is very limited. This paper shows the research of development of novel adaptive educational games for students who can adjust the difficulty level of games based on the ability of the user, so that it can motivate students to continue to play these games. We propose a method where these games can adjust the level of difficulty, based on the assessment of the results of previous problems using neural networks with three inputs in the form of percentage correct, the speed of answer and interest mode of games (animation / lessons) and 1 output. The experimental results are presented and show the adaptive games are running well on mobile devices based on BlackBerry platform
Abstract: This paper reports the findings of a research
conducted to evaluate the ownership and usage of technology devices
within Distance Education students- according to their age. This
research involved 45 Distance Education students from USM
Universiti Sains Malaysia (DEUSM) as its respondents. Data was
collected through questionnaire that had been developed by the
researchers based on some literature review. The data was analyzed
to find out the frequencies of respondents agreements towards
ownership of technology devices and the use of technology devices.
The findings shows that all respondents own mobile phone and
majority of them reveal that they use mobile on regular basis. The
student in the age 30-39 has the heist ownership of the technology
devices.
Abstract: The paper researched and presented a virtual simulation system based on a full-digital lunar terrain, integrated with kinematics and dynamics module as well as autonomous navigation simulation module. The system simulation models are established. Enabling technologies such as digital lunar surface module, kinematics and dynamics simulation, Autonomous navigation are investigated. A prototype system for lunar rover locomotion simulation is developed based on these technologies. Autonomous navigation is a key echnology in lunar rover system, but rarely involved in virtual simulation system. An autonomous navigation simulation module have been integrated in this prototype system, which was proved by the simulation results that the synthetic simulation and visualizing analysis system are established in the system, and the system can provide efficient support for research on the autonomous navigation of lunar rover.
Abstract: The automatic construction of large, high-resolution
image vistas (mosaics) is an active area of research in the fields of
photogrammetry [1,2], computer vision [1,4], medical image
processing [4], computer graphics [3] and biometrics [8]. Image
stitching is one of the possible options to get image mosaics. Vista
Creation in image processing is used to construct an image with a
large field of view than that could be obtained with a single
photograph. It refers to transforming and stitching multiple images
into a new aggregate image without any visible seam or distortion in
the overlapping areas. Vista creation process aligns two partial
images over each other and blends them together. Image mosaics
allow one to compensate for differences in viewing geometry. Thus
they can be used to simplify tasks by simulating the condition in
which the scene is viewed from a fixed position with single camera.
While obtaining partial images the geometric anomalies like rotation,
scaling are bound to happen. To nullify effect of rotation of partial
images on process of vista creation, we are proposing rotation
invariant vista creation algorithm in this paper. Rotation of partial
image parts in the proposed method of vista creation may introduce
some missing region in the vista. To correct this error, that is to fill
the missing region further we have used image inpainting method on
the created vista. This missing view regeneration method also
overcomes the problem of missing view [31] in vista due to cropping,
irregular boundaries of partial image parts and errors in digitization
[35]. The method of missing view regeneration generates the missing
view of vista using the information present in vista itself.
Abstract: With increasing data in medical databases, medical
data retrieval is growing in popularity. Some of this analysis
including inducing propositional rules from databases using many
soft techniques, and then using these rules in an expert system.
Diagnostic rules and information on features are extracted from
clinical databases on diseases of congenital anomaly. This paper
explain the latest soft computing techniques and some of the
adaptive techniques encompasses an extensive group of methods
that have been applied in the medical domain and that are used for
the discovery of data dependencies, importance of features,
patterns in sample data, and feature space dimensionality
reduction. These approaches pave the way for new and interesting
avenues of research in medical imaging and represent an important
challenge for researchers.
Abstract: Iran has diverse climates and each have established distinct properties in their area. The extent and intensity of climatic factors effects on the lives of people living in various regions of Iran is so great that it cannot be simply ignored. In a large part of Iran known as the Central Plateau there is no precipitation for more than half of the year and dry weather and scarcity of fresh water pose an ever present problem for the people of these regions while in north of Iran upon the southern shores of the Caspian Sea the people face 80% humidity caused by the sea and 2 meters of annual precipitation. This article tries to review the past experiences of local architecture of Iran-s various regions so that they can be used to reshape and redirect the urban areas and structure of Iran-s current cities to provide environmental comfort by minimum use of fossil fuels.
Abstract: This paper presents an analytical method to solve
governing consolidation parabolic partial differential equation (PDE)
for inelastic porous Medium (soil) with consideration of variation of
equation coefficient under cyclic loading. Since under cyclic loads,
soil skeleton parameters change, this would introduce variable
coefficient of parabolic PDE. Classical theory would not rationalize
consolidation phenomenon in such condition. In this research, a
method based on time space mapping to a virtual time space along
with superimposing rule is employed to solve consolidation of
inelastic soils in cyclic condition. Changes of consolidation
coefficient applied in solution by modification of loading and
unloading duration by introducing virtual time. Mapping function is
calculated based on consolidation partial differential equation results.
Based on superimposing rule a set of continuous static loads in
specified times used instead of cyclic load. A set of laboratory
consolidation tests under cyclic load along with numerical
calculations were performed in order to verify the presented method.
Numerical solution and laboratory tests results showed accuracy of
presented method.
Abstract: Process planning and production scheduling play
important roles in manufacturing systems. In this paper a multiobjective
mixed integer linear programming model is presented for
the integrated planning and scheduling of multi-product. The aim is
to find a set of high-quality trade-off solutions. This is a
combinatorial optimization problem with substantially large solution
space, suggesting that it is highly difficult to find the best solutions
with the exact search method. To account for it, a PSO-based
algorithm is proposed by fully utilizing the capability of the
exploration search and fast convergence. To fit the continuous PSO
in the discrete modeled problem, a solution representation is used in
the algorithm. The numerical experiments have been performed to
demonstrate the effectiveness of the proposed algorithm.
Abstract: Evidence-based medicine is a new direction in modern healthcare. Its task is to prevent, diagnose and medicate diseases using medical evidence. Medical data about a large patient population is analyzed to perform healthcare management and medical research. In order to obtain the best evidence for a given disease, external clinical expertise as well as internal clinical experience must be available to the healthcare practitioners at right time and in the right manner. External evidence-based knowledge can not be applied directly to the patient without adjusting it to the patient-s health condition. We propose a data warehouse based approach as a suitable solution for the integration of external evidence-based data sources into the existing clinical information system and data mining techniques for finding appropriate therapy for a given patient and a given disease. Through integration of data warehousing, OLAP and data mining techniques in the healthcare area, an easy to use decision support platform, which supports decision making process of care givers and clinical managers, is built. We present three case studies, which show, that a clinical data warehouse that facilitates evidence-based medicine is a reliable, powerful and user-friendly platform for strategic decision making, which has a great relevance for the practice and acceptance of evidence-based medicine.
Abstract: The purpose of this research was to study the
influence of learning efficiency on local accountants’ job
performance effectiveness. This paper drew upon the survey data
collected from 335 local accountants survey conducted at Nakhon
Ratchasima province, Thailand. The statistics utilized in this paper
included percentage, mean, standard deviation, and regression
analysis. The findings revealed that the majority of samples were
between 31-40 years old, married, held an undergraduate degree, and
had an average income between 10,000-15,000 baht. The majority of
respondents had less than five years of accounting experience and
worked for local administrations. The overall learning efficiency
score was in the highest level while the local accountants’ job
performance effectiveness score was also in the high level. The
hypothesis testing’s result disclosed that learning efficiency factors
which were knowledge, Skill, and Attitude had an influence on local
accountants’ job the performance effectiveness.
Abstract: Manufacturing Industries face a crucial change as products and processes are required to, easily and efficiently, be reconfigurable and reusable. In order to stay competitive and flexible, situations also demand distribution of enterprises globally, which requires implementation of efficient communication strategies. A prototype system called the “Broadcaster" has been developed with an assumption that the control environment description has been engineered using the Component-based system paradigm. This prototype distributes information to a number of globally distributed partners via an adoption of the circular-based data processing mechanism. The work highlighted in this paper includes the implementation of this mechanism in the domain of the manufacturing industry. The proposed solution enables real-time remote propagation of machine information to a number of distributed supply chain client resources such as a HMI, VRML-based 3D views and remote client instances regardless of their distribution nature and/ or their mechanisms. This approach is presented together with a set of evaluation results. Authors- main concentration surrounds the reliability and the performance metric of the adopted approach. Performance evaluation is carried out in terms of the response times taken to process the data in this domain and compared with an alternative data processing implementation such as the linear queue mechanism. Based on the evaluation results obtained, authors justify the benefits achieved from this proposed implementation and highlight any further research work that is to be carried out.
Abstract: For evaluating the severity of Chronic Obstructive Pulmonary Disease (COPD), one is interested in inspecting the airway wall thickening due to inflammation. Although airway segmentations have being well developed to reconstruct in high order, airway wall segmentation remains a challenge task. While tackling such problem as a multi-surface segmentation, the interrelation within surfaces needs to be considered. We propose a new method for three-dimensional airway wall segmentation using spring structural active contour model. The method incorporates the gravitational field of the image and repelling force field of the inner lumen as the soft constraint and the geometric spring structure of active contour as the hard constraint to approximate a three-dimensional coupled surface readily for thickness measurements. The results show the preservation of topology constraints of coupled surfaces. In conclusion, our springy, soft-tissue-like structure ensures the globally optimal solution and waives the shortness following by the inevitable improper inner surface constraint.
Abstract: Recently, much research has been conducted for
security for wireless sensor networks and ubiquitous computing.
Security issues such as authentication and data integrity are major
requirements to construct sensor network systems. Advanced
Encryption Standard (AES) is considered as one of candidate
algorithms for data encryption in wireless sensor networks. In this
paper, we will present the hardware architecture to implement low
power AES crypto module. Our low power AES crypto module has
optimized architecture of data encryption unit and key schedule unit
which could be applicable to wireless sensor networks. We also details
low power design methods used to design our low power AES crypto
module.
Abstract: Cognitive Infocommunications (CogInfoCom) is a new
research direction which has emerged as the synergic convergence
of infocommunications and the cognitive sciences. In this paper,
we provide the definition of CogInfoCom, and propose an architectural
framework for the interaction-oriented design of CogInfoCom
systems. We provide the outlines of an application example of
the interaction-oriented architecture, and briefly discuss its main
characteristics.
Abstract: Semantic query optimization consists in restricting the
search space in order to reduce the set of objects of interest for a
query. This paper presents an indexing method based on UB-trees
and a static analysis of the constraints associated to the views of the
database and to any constraint expressed on attributes. The result of
the static analysis is a partitioning of the object space into disjoint
blocks. Through Space Filling Curve (SFC) techniques, each
fragment (block) of the partition is assigned a unique identifier,
enabling the efficient indexing of fragments by UB-trees. The search
space corresponding to a range query is restricted to a subset of the
blocks of the partition. This approach has been developed in the
context of a KB-DBMS but it can be applied to any relational
system.
Abstract: Tuberculosis (TB) is a bacterial infectious disease caused by the obligate human pathogen, Mycobacterium tuberculosis. Multidrug-resistant tuberculosis (MDR-TB) is a global reality that threatens tuberculosis control. Resistance to antibiotic Rifampicin, occurs in 95% of cases through nucleotide substitutions in an 81-bp core region of the rpoB i.e; beta subunit of DNA dependant RNA polymerase. In this paper, we studied the Rifampicin-rpoB receptor interactions In silico. First, homology modeling was performed to obtain the three dimensional structure of Mycobacterium rpoB. Sixty analogs of Rifampicin were prepared using Marvin sketch software. Both original Rifampicin and the analogs were docked with rpoB and energy values were obtained. Out of sixty analogs, 43 analogs had lesser energy values than conventional Rifampicin and hence are predicted to have greater binding affinity to rpoB. Thus, this study offers a route for the development of Rifampicin analogs against multi drug resistant Mycobacterium rpoB.