Abstract: Phishing, or stealing of sensitive information on the
web, has dealt a major blow to Internet Security in recent times. Most
of the existing anti-phishing solutions fail to handle the fuzziness
involved in phish detection, thus leading to a large number of false
positives. This fuzziness is attributed to the use of highly flexible and
at the same time, highly ambiguous HTML language. We introduce a
new perspective against phishing, that tries to systematically prove,
whether a given page is phished or not, using the corresponding
original page as the basis of the comparison. It analyzes the layout of
the pages under consideration to determine the percentage distortion
between them, indicative of any form of malicious alteration. The
system design represents an intelligent system, employing dynamic
assessment which accurately identifies brand new phishing attacks
and will prove effective in reducing the number of false positives.
This framework could potentially be used as a knowledge base, in
educating the internet users against phishing.
Abstract: Fermented cassava flours (lafun) sold in Ogun and Oyo
States of Nigeria were collected from 10 markets for a period of two
months and analysed to determine their safety status. The presence of
trace metals was due to high vehicular movement around the drying
sites and markets. Cyanide and moisture contents of samples were
also determined to assess the adequacy of fermentation and drying.
The result showed that sample OWO was found to have the highest
amount of 16.02±0.12mg/kg cyanide while the lowest was found in
sample OJO with 10.51±0.10mg/kg. The results also indicated that
sample TVE had the highest moisture content of 18.50±0.20% while
sample OWO had the lowest amount of 12.46±0.47%. Copper and
lead levels were found to be highest in TVE with values 28.10mg/kg
and 1.1mg/kg respectively, while sample BTS had the lowest values
of 20.6mg/kg and 0.05mg/kg respectively. High value of cyanide
indicated inadequate fermentation.
Abstract: In this paper, we propose a face recognition algorithm
using AAM and Gabor features. Gabor feature vectors which are well
known to be robust with respect to small variations of shape, scaling,
rotation, distortion, illumination and poses in images are popularly
employed for feature vectors for many object detection and
recognition algorithms. EBGM, which is prominent among face
recognition algorithms employing Gabor feature vectors, requires
localization of facial feature points where Gabor feature vectors are
extracted. However, localization method employed in EBGM is based
on Gabor jet similarity and is sensitive to initial values. Wrong
localization of facial feature points affects face recognition rate. AAM
is known to be successfully applied to localization of facial feature
points. In this paper, we devise a facial feature point localization
method which first roughly estimate facial feature points using AAM
and refine facial feature points using Gabor jet similarity-based facial
feature localization method with initial points set by the rough facial
feature points obtained from AAM, and propose a face recognition
algorithm using the devised localization method for facial feature
localization and Gabor feature vectors. It is observed through
experiments that such a cascaded localization method based on both
AAM and Gabor jet similarity is more robust than the localization
method based on only Gabor jet similarity. Also, it is shown that the
proposed face recognition algorithm using this devised localization
method and Gabor feature vectors performs better than the
conventional face recognition algorithm using Gabor jet
similarity-based localization method and Gabor feature vectors like
EBGM.
Abstract: The purpose of this study is to present a non invasive
method for the marginal adaptation evaluation in class V composite
restorations. Standardized class V cavities, prepared in human
extracted teeth, were filled with Premise (Kerr) composite. The
specimens were thermo cycled. The interfaces were examined by
Optical Coherence Tomography method (OCT) combined with the
confocal microscopy and fluorescence. The optical configuration
uses two single mode directional couplers with a superluminiscent
diode as the source at 1300 nm. The scanning procedure is similar to
that used in any confocal microscope, where the fast scanning is enface
(line rate) and the depth scanning is much slower (at the frame
rate). Gaps at the interfaces as well as inside the composite resin
materials were identified. OCT has numerous advantages which
justify its use in vivo as well as in vitro in comparison with
conventional techniques.
Abstract: The output beam quality of multi transverse modes of
laser, are relatively poor. In order to obtain better beam quality, one
may use an aperture inside the laser resonator. In this case, various
transverse modes can be selected. We have selected various
transverse modes both by simulation and doing experiment. By
inserting a circular aperture inside the diode end-pumped Nd:YAG
pulsed laser resonator, we have obtained 00 TEM , 01 TEM
, 20 TEM and have studied which parameters, can change the mode
shape. Then, we have determined the beam quality factor of TEM00
gaussian mode.
Abstract: The response surface methodology (RSM) is a
collection of mathematical and statistical techniques useful in the
modeling and analysis of problems in which the dependent variable
receives the influence of several independent variables, in order to
determine which are the conditions under which should operate these
variables to optimize a production process. The RSM estimated a
regression model of first order, and sets the search direction using the
method of maximum / minimum slope up / down MMS U/D.
However, this method selects the step size intuitively, which can
affect the efficiency of the RSM. This paper assesses how the step
size affects the efficiency of this methodology. The numerical
examples are carried out through Monte Carlo experiments,
evaluating three response variables: efficiency gain function, the
optimum distance and the number of iterations. The results in the
simulation experiments showed that in response variables efficiency
and gain function at the optimum distance were not affected by the
step size, while the number of iterations is found that the efficiency if
it is affected by the size of the step and function type of test used.
Abstract: Concerns about low levels of children-s physical activity and motor skill development, prompted the Ministry of Education to trial a physical activity pilot project (PAPP) in 16 New Zealand primary schools. The project comprised professional development and training in physical education for lead teachers and introduced four physical activity coordinators to liaise with and increase physical activity opportunities in the pilot schools. A survey of generalist teachers (128 baseline, 155 post-intervention) from these schools looked at timetabled physical activity sessions and issues related to teaching physical education. The authors calculated means and standard deviations of data relating to timetabled PE sessions and used a one-way analysis of variance to determine significant differences. Results indicated time devoted to physical activity related subjects significantly increased over the course of the intervention. Teacher-s reported improved confidence and competence, which resulted in an improvement in quality physical education delivered more often.
Abstract: This research was carried out to determine the
possible effects of low electromagnetic field (EMF) exposure to the
developing mice fetuses. Pregnant mice were exposed to EMF
exposure at 0mT (sham) and 1.2 mT for six hours per session, carried
out on gestation day 3, 6, 9, 12 and 15. Samples from the stillborn
offspring were observed for morphological defects. The heart didn-t
show progressive cellular damage, the lungs were congested and
emphysemics. The bones were in advance stage of hypertrophy.
Spectrums of morphological defects were observed over 70% of the
surviving offspring. These results indicate that even at lower
exposure to low EMF, is enough to induce morphological defects in
prenatal mice.
Abstract: Telecommuting has become an increasingly popular
work arrangement. However, little research has examined the impact
of telecommuting on the relationship between employees and the
organization. This study aims to shed light on this aspect by
comparing the loyalty of telecommuters and non telecommuters as it
can be viewed from three angles: organizational loyalty, peer loyalty,
and professional loyalty. Furthermore, this paper will explore the
dynamics among employee loyalty, productivity, and job
satisfaction. Whereas previous studies had looked on employees that
are not fully telecommuting, the current study concentrates on
employees that are exclusively working from home.
Abstract: In this study, effects of premixed and equivalence
ratios on CO and HC emissions of a dual fuel HCCI engine are
investigated. Tests were conducted on a single-cylinder engine with
compression ratio of 17.5. Premixed gasoline is provided by a
carburetor connected to intake manifold and equipped with a screw
to adjust premixed air-fuel ratio, and diesel fuel is injected directly
into the cylinder through an injector at pressure of 250 bars. A heater
placed at inlet manifold is used to control the intake charge
temperature. Optimal intake charge temperature results in better
HCCI combustion due to formation of a homogeneous mixture,
therefore, all tests were carried out over the optimum intake
temperature of 110-115 ºC. Timing of diesel fuel injection has a great
effect on stratification of in-cylinder charge and plays an important
role in HCCI combustion phasing. Experiments indicated 35 BTDC
as the optimum injection timing. Varying the coolant temperature in
a range of 40 to 70 ºC, better HCCI combustion was achieved at 50
ºC. Therefore, coolant temperature was maintained 50 ºC during all
tests. Simultaneous investigation of effective parameters on HCCI
combustion was conducted to determine optimum parameters
resulting in fast transition to HCCI combustion. One of the
advantages of the method studied in this study is feasibility of easy
and fast transition of typical diesel engine to a dual fuel HCCI
engine. Results show that increasing premixed ratio, while keeping
EGR rate constant, increases unburned hydrocarbon (UHC)
emissions due to quenching phenomena and trapping of premixed
fuel in crevices, but CO emission decreases due to increase in CO to
CO2 reactions.
Abstract: Due to growing environmental concerns of the cement
industry, alternative cement technologies have become an area of
increasing interest. It is now believed that new binders are
indispensable for enhanced environmental and durability
performance. Self-compacting Geopolymer concrete is an innovative
method and improved way of concreting operation that does not
require vibration for placing it and is produced by complete
elimination of ordinary Portland cement.
This paper documents the assessment of the compressive strength
and workability characteristics of low-calcium fly ash based selfcompacting
geopolymer concrete. The essential workability
properties of the freshly prepared Self-compacting Geopolymer
concrete such as filling ability, passing ability and segregation
resistance were evaluated by using Slump flow, V-funnel, L-box and
J-ring test methods. The fundamental requirements of high
flowability and segregation resistance as specified by guidelines on
Self Compacting Concrete by EFNARC were satisfied. In addition,
compressive strength was determined and the test results are included
here. This paper also reports the effect of extra water, curing time and
curing temperature on the compressive strength of self-compacting
geopolymer concrete. The test results show that extra water in the
concrete mix plays a significant role. Also, longer curing time and
curing the concrete specimens at higher temperatures will result in
higher compressive strength.
Abstract: Introduction: Obesity is a major health risk issue in
the present day of life for one and all globally. Obesity is one of the
major concerns for public health according to recent increasing trends
in obesity-related diseases such as Type 2 diabetes. ( Kazuya,
1994).and hyperlipidemia, (Sakata,1990) .which are more prevalent
in Japanese adults with body mass index (BMI) values Z25 kg/m2.(
Japanese Ministry of Health and Welfare,1997). The purpose of the
study was to assess the effect of twelve weeks of brisk walking on
blood pressure and body mass index, anthropometric measurements
of obese males. Method: Thirty obese (BMI= above 30) males, aged
18 to 22 years, were selected from King Fahd University of
Petroleum & Minerals, Saudi Arabia. The subject-s height (cm) was
measured using a stadiometer and body mass (kg) was measured with
a electronic weighing machine. BMI was subsequently calculated
(kg/m2). The blood pressure was measured with standardized
sphygmomanometer in mm of Hg. All the measurements were taken
twice before and twice after the experimental period. The pre and
post anthropometric measurements of waist and hip circumference
were measured with the steel tape in cm. The subjects underwent
walking schedule two times in a week for 12 weeks. The 45 minute
sessions of brisk walking were undertaken at an average intensity of
65% to 85% of maximum HR (HRmax; calculated as 220-age).
Results & Discussion: Statistical findings revealed significant
changes from pre test to post test in case of both systolic blood
pressure and diastolic blood pressure in the walking group. Results
also showed significant decrease in their body mass index and
anthropometric measurements i.e. (waist & hip circumference).
Conclusion: It was concluded that twelve weeks brisk walking is
beneficial for lowering of blood pressure, body mass index, and
anthropometric circumference of obese males.
Abstract: Medical negligence disputes in Malaysia are mainly resolved through litigation by using the tort system. The tort system, being adversarial in nature has subjected parties to litigation hazards such as delay, excessive costs and uncertainty of outcome. The dissatisfaction of the tort system in compensating medically injured victims has created various alternatives to litigation. Amongst them is the implementation of a no-fault compensation system which would allow compensation to be given without the need of proving fault on the medical personnel. Instead, the community now bears the burden of compensating and at the end, promotes collective responsibility. For Malaysia, introducing a no-fault system would provide a tempting solution and may ultimately, achieve justice for the medical injured victims. Nevertheless, such drastic change requires a great deal of consideration to determine the suitability of the system and whether or not it will eventually cater for the needs of the Malaysian population
Abstract: Bio-chips are used for experiments on genes and
contain various information such as genes, samples and so on. The
two-dimensional bio-chips, in which one axis represent genes and the
other represent samples, are widely being used these days. Instead of
experimenting with real genes which cost lots of money and much
time to get the results, bio-chips are being used for biological
experiments. And extracting data from the bio-chips with high
accuracy and finding out the patterns or useful information from such
data is very important. Bio-chip analysis systems extract data from
various kinds of bio-chips and mine the data in order to get useful
information. One of the commonly used methods to mine the data is
classification. The algorithm that is used to classify the data can be
various depending on the data types or number characteristics and so
on. Considering that bio-chip data is extremely large, an algorithm that
imitates the ecosystem such as the ant algorithm is suitable to use as an
algorithm for classification. This paper focuses on finding the
classification rules from the bio-chip data using the Ant Colony
algorithm which imitates the ecosystem. The developed system takes
in consideration the accuracy of the discovered rules when it applies it
to the bio-chip data in order to predict the classes.
Abstract: A major challenge in camel productivity is the high
mortality rate of camel calves in the early stage due to the lack of
colostrums. This study investigates the time required for the calves to
obtain the optimum amount of the immunoglobulin (IgG). Eleven
pregnant female camels (Camelus Dromedarus) were selected
randomly and variant in age and gestation. After delivery, 7 calves
were obtained and used for this investigation. Colostrum samples
were collected from mothers immediately after parturition. Blood
samples were obtained from the calves as follow: 0 day (before
suckling), 24, 48, 72, 96, 120 and 144 hours, 2nd, 3rd, and 4th weeks
post suckling. Blood serum and colostrums whey were separated and
used to determine IgG concentration, total protein and concentration
of Cortisol and Thyroxin. The results showed high levels of IgG in
camel colostrums (328.8 ± 4.5 mg / ml). The IgG concentration in
serum of calves was the highest within 1st 24 h after suckling (140.75
mg /ml), and then declined gradually reached lower level at 144 h
(41.97 mg / ml). The average turnover rate (t 1/2) of serum IgG in
the all cases was 3.22 days. The turnover of ranged from 2.56 days
for calves have values of IgG more than average and 7.7 days for
those with values below average. In spite of very high levels of
thyroxin in sera of new born the results showed no correlation
between cortisol and thyroxin with IgG levels.
Abstract: The heuristic decision rules used for project
scheduling will vary depending upon the project-s size, complexity,
duration, personnel, and owner requirements. The concept of project
complexity has received little detailed attention. The need to
differentiate between easy and hard problem instances and the
interest in isolating the fundamental factors that determine the
computing effort required by these procedures inspired a number of
researchers to develop various complexity measures.
In this study, the most common measures of project complexity are
presented. A new measure of project complexity is developed. The
main privilege of the proposed measure is that, it considers size,
shape and logic characteristics, time characteristics, resource
demands and availability characteristics as well as number of critical
activities and critical paths. The degree of sensitivity of the proposed
measure for complexity of project networks has been tested and
evaluated against the other measures of complexity of the considered
fifty project networks under consideration in the current study. The
developed measure showed more sensitivity to the changes in the
network data and gives accurate quantified results when comparing
the complexities of networks.
Abstract: Self-Excited Induction Generator (SEIG) builds up voltage while it enters in its magnetic saturation region. Due to non-linear magnetic characteristics, the performance analysis of SEIG involves cumbersome mathematical computations. The dependence of air-gap voltage on saturated magnetizing reactance can only be established at rated frequency by conducting a laboratory test commonly known as synchronous run test. But, there is no laboratory method to determine saturated magnetizing reactance and air-gap voltage of SEIG at varying speed, terminal capacitance and other loading conditions. For overall analysis of SEIG, prior information of magnetizing reactance, generated frequency and air-gap voltage is essentially required. Thus, analytical methods are the only alternative to determine these variables. Non-existence of direct mathematical relationship of these variables for different terminal conditions has forced the researchers to evolve new computational techniques. Artificial Neural Networks (ANNs) are very useful for solution of such complex problems, as they do not require any a priori information about the system. In this paper, an attempt is made to use cascaded neural networks to first determine the generated frequency and magnetizing reactance with varying terminal conditions and then air-gap voltage of SEIG. The results obtained from the ANN model are used to evaluate the overall performance of SEIG and are found to be in good agreement with experimental results. Hence, it is concluded that analysis of SEIG can be carried out effectively using ANNs.
Abstract: This paper discusses EM algorithm and Bootstrap
approach combination applied for the improvement of the satellite
image fusion process. This novel satellite image fusion method based
on estimation theory EM algorithm and reinforced by Bootstrap
approach was successfully implemented and tested. The sensor
images are firstly split by a Bayesian segmentation method to
determine a joint region map for the fused image. Then, we use the
EM algorithm in conjunction with the Bootstrap approach to develop
the bootstrap EM fusion algorithm, hence producing the fused
targeted image. We proposed in this research to estimate the
statistical parameters from some iterative equations of the EM
algorithm relying on a reference of representative Bootstrap samples
of images. Sizes of those samples are determined from a new
criterion called 'hybrid criterion'. Consequently, the obtained results
of our work show that using the Bootstrap EM (BEM) in image
fusion improve performances of estimated parameters which involve
amelioration of the fused image quality; and reduce the computing
time during the fusion process.
Abstract: Polynomial bases and normal bases are both used for
elliptic curve cryptosystems, but field arithmetic operations such as
multiplication, inversion and doubling for each basis are implemented
by different methods. In general, it is said that normal bases, especially
optimal normal bases (ONB) which are special cases on normal bases,
are efficient for the implementation in hardware in comparison with
polynomial bases. However there seems to be more examined by
implementing and analyzing these systems under similar condition. In
this paper, we designed field arithmetic operators for each basis over
GF(2233), which field has a polynomial basis recommended by SEC2
and a type-II ONB both, and analyzed these implementation results.
And, in addition, we predicted the efficiency of two elliptic curve
cryptosystems using these field arithmetic operators.
Abstract: The main objective of this paper is to determine the
isolated effect of silica fume on tensile, compressive and flexure strengths on high strength lightweight concrete. Many experiments
were carried out by replacing cement with different percentages of silica fume at different constant water-binder ratio keeping other mix
design variables constant. The silica fume was replaced by 0%, 5%,
10%, 15%, 20% and 25% for a water-binder ratios ranging from 0.26
to 0.42. For all mixes, split tensile, compressive and flexure strengths
were determined at 28 days. The results showed that the tensile, compressive and flexure strengths increased with silica fume incorporation but the optimum replacement percentage is not
constant because it depends on the water–cementitious material (w/cm) ratio of the mix. Based on the results, a relationship between
split tensile, compressive and flexure strengths of silica fume concrete was developed using statistical methods.