Abstract: One of the major parts of a jet engine is air intake,
which provides proper and required amount of air for the engine to
operate. There are several aerodynamic parameters which should be
considered in design, such as distortion, pressure recovery, etc. In
this research, the effects of lip ice accretion on pitot intake
performance are investigated. For ice accretion phenomenon, two
supervised multilayer neural networks (ANN) are designed, one for
ice shape prediction and another one for ice roughness estimation
based on experimental data. The Fourier coefficients of transformed
ice shape and parameters include velocity, liquid water content
(LWC), median volumetric diameter (MVD), spray time and
temperature are used in neural network training. Then, the subsonic
intake flow field is simulated numerically using 2D Navier-Stokes
equations and Finite Volume approach with Hybrid mesh includes
structured and unstructured meshes. The results are obtained in
different angles of attack and the variations of intake aerodynamic
parameters due to icing phenomenon are discussed. The results show
noticeable effects of ice accretion phenomenon on intake behavior.
Abstract: Treatment of tar-containing wastewater is necessary
for the successful operation of biomass gasification plants (BGPs). In
the present study, tar-containing wastewater was treated using lime
and alum for the removal of in-organics, followed by adsorption on
powdered activated carbon (PAC) for the removal of organics. Limealum
experiments were performed in a jar apparatus and activated
carbon studies were performed in an orbital shaker. At optimum
concentrations, both lime and alum individually proved to be capable
of removing color, total suspended solids (TSS) and total dissolved
solids (TDS), but in both cases, pH adjustment had to be carried out
after treatment. The combination of lime and alum at the dose ratio
of 0.8:0.8 g/L was found to be optimum for the removal of inorganics.
The removal efficiency achieved at optimum
concentrations were 78.6, 62.0, 62.5 and 52.8% for color, alkalinity,
TSS and TDS, respectively. The major advantages of the lime-alum
combination were observed to be as follows: no requirement of pH
adjustment before and after treatment and good settleability of
sludge. Coagulation-precipitation followed by adsorption on PAC
resulted in 92.3% chemical oxygen demand (COD) removal and
100% phenol removal at equilibrium. Ammonia removal efficiency
was found to be 11.7% during coagulation-flocculation and 36.2%
during adsorption on PAC. Adsorption of organics on PAC in terms
of COD and phenol followed Freundlich isotherm with Kf = 0.55 &
18.47 mg/g and n = 1.01 & 1.45, respectively. This technology may
prove to be one of the fastest and most techno-economically feasible
methods for the treatment of tar-containing wastewater generated
from BGPs.
Abstract: For a spatiotemporal database management system,
I/O cost of queries and other operations is an important performance
criterion. In order to optimize this cost, an intense research on
designing robust index structures has been done in the past decade.
With these major considerations, there are still other design issues
that deserve addressing due to their direct impact on the I/O cost.
Having said this, an efficient buffer management strategy plays a key
role on reducing redundant disk access. In this paper, we proposed an
efficient buffer strategy for a spatiotemporal database index
structure, specifically indexing objects moving over a network of
roads. The proposed strategy, namely MONPAR, is based on the data
type (i.e. spatiotemporal data) and the structure of the index
structure. For the purpose of an experimental evaluation, we set up a
simulation environment that counts the number of disk accesses
while executing a number of spatiotemporal range-queries over the
index. We reiterated simulations with query sets with different
distributions, such as uniform query distribution and skewed query
distribution. Based on the comparison of our strategy with wellknown
page-replacement techniques, like LRU-based and Prioritybased
buffers, we conclude that MONPAR behaves better than its
competitors for small and medium size buffers under all used query-distributions.
Abstract: Stegnography is a new way of secret
communication the most widely used mechanism on account
of its simplicity is the use of the least significant bit. We have
used the least significant bit (2 LSB and 4 LSB) substitution
method. Depending upon the characteristics of the individual
portions of cover image we decide whether to use 2 LSB or 4
LSB thus it is an adaptive stegnography technique. We used
one of the three channels to behave as indicator to indicate the
presence of hidden data in other two channels. The module
showed impressive results in terms of capacity to hide the
data. In proposed method, instead of using RGB color space
directly, YCbCr color space is used to make use of human
visual system characteristic.
Abstract: This paper deals with motion planning of multiple
mobile robots. Mobile robots working together to achieve several
objectives have many advantages over single robot system. However,
the planning and coordination between the mobile robots is
extremely difficult. In the present investigation rule-based and rulebased-
neuro-fuzzy techniques are analyzed for multiple mobile
robots navigation in an unknown or partially known environment.
The final aims of the robots are to reach some pre-defined goals.
Based upon a reference motion, direction; distances between the
robots and obstacles; and distances between the robots and targets;
different types of rules are taken heuristically and refined later to find
the steering angle. The control system combines a repelling influence
related to the distance between robots and nearby obstacles and with
an attracting influence between the robots and targets. Then a hybrid
rule-based-neuro-fuzzy technique is analysed to find the steering
angle of the robots. Simulation results show that the proposed rulebased-
neuro-fuzzy technique can improve navigation performance in
complex and unknown environments compared to this simple rulebased
technique.
Abstract: This study sought to uncover the complex role of
stress in the workplace by investigating both positive (eustress) and
negative (distress) stress responses. In particular, the study tested a
mediation model in which organisational stressors (person-job fit and
role overload) influence employee affective wellbeing, both directly
and indirectly through stress responses. Participants were recruited
from retail and finance organisations in Australia and New Zealand,
and asked to complete an anonymous online questionnaire. A total of
140 individuals returned completed questionnaires. The results show
that person-job fit influenced eustress, which in turn had a positive
effect on employee affective wellbeing; and role overload impacted
distress, which in turn held a negative influence on affective
wellbeing. These findings indicate that different organisational
stressors have unique relationships with eustress and distress
responses. Limitations and implications of the study are discussed.
Abstract: This paper presents an innovative computer system
that contributes to sustainable development of the enterprise. The
research refers to a rethinking of traditional systems of collaboration
and risk assessment, present in any organization, leading to a
sustainable enterprise. This concept integrates emerging tools that
allow the implementation and exploitation of the collective
intelligence of the enterprise, allowing the exchange of contextual,
agile and simplified information, and collaboration with networks of
customers and partners in an environment where risks are controlled.
Risk assessment is done in a systemic way: the enterprise as the
system compared to the contained departments and the enterprise as a
subsystem compared to: families of international standards and
sustainability-s responsibilities. The enterprise, in this systemic
vision, responds to the requirements that any existing system to
operate continuously in an indefinite future without reaching key
resource depletion. The research is done by integrating collaborative
science, engineering, management, psychology, obtaining thus a
cornerstone of sustainable development of the enterprise.
Abstract: The paper presents the multi-element synthetic
transmit aperture (MSTA) method with a small number of elements
transmitting and all elements apertures in medical ultrasound
imaging. As compared to the other methods MSTA allows to
increase the system frame rate and provides the best compromise
between penetration depth and lateral resolution.
In the experiments a 128-element linear transducer array with
0.3 mm pitch excited by a burst pulse of 125 ns duration were used.
The comparison of 2D ultrasound images of tissue mimicking
phantom obtained using the STA and the MSTA methods is
presented to demonstrate the benefits of the second approach. The
results were obtained using SA algorithm with transmit and receive
signals correction based on a single element directivity function.
Abstract: The research purpose was to evaluate the effect of
Active Imagination Technique (AIT) for bruxism treatment. This
project was approved by the Ethics Committee on Human Research
(CAAE: 05619512.9.0000.0109). Twenty-one volunteers using
interocclusal splint completed the study. Initially they filled in a
questionnaire about their condition, composed of objective questions
on signs and symptoms. Following they were underwent asingle
session of AIT. After 15 days, the volunteers met again the same
initial questionnaire. The results were compared and showed that the
vast majority had pain symptoms, difficulty opening the mouth, pain
when chewing, reduced, some of the participants abandoned the
interocclusal splint during the evaluate period. It is concluded that the
technique can be used in bruxism treatment. Results seem to be
promising and demonstrates the need of highlighting Active
Imagination Technique since it points a possibility of bruxism cure
and that is unprecedented.
Abstract: Removing noise from the any processed images is very important. Noise should be removed in such a way that important information of image should be preserved. A decisionbased nonlinear algorithm for elimination of band lines, drop lines, mark, band lost and impulses in images is presented in this paper. The algorithm performs two simultaneous operations, namely, detection of corrupted pixels and evaluation of new pixels for replacing the corrupted pixels. Removal of these artifacts is achieved without damaging edges and details. However, the restricted window size renders median operation less effective whenever noise is excessive in that case the proposed algorithm automatically switches to mean filtering. The performance of the algorithm is analyzed in terms of Mean Square Error [MSE], Peak-Signal-to-Noise Ratio [PSNR], Signal-to-Noise Ratio Improved [SNRI], Percentage Of Noise Attenuated [PONA], and Percentage Of Spoiled Pixels [POSP]. This is compared with standard algorithms already in use and improved performance of the proposed algorithm is presented. The advantage of the proposed algorithm is that a single algorithm can replace several independent algorithms which are required for removal of different artifacts.
Abstract: In practice, we often come across situations where it is
necessary to make decisions based on incomplete or uncertain data.
In control systems it may be due to the unknown exact mathematical
model, or its excessive complexity (e.g. nonlinearity) when it is
necessary to simplify it, respectively, to solve it using a rule base. In
the case of databases, searching data we compare a similarity
measure with of the requirements of the selection with stored data,
where both the select query and the data itself may contain vague
terms, for example in the form of linguistic qualifiers. In this paper,
we focus on the processing of uncertain data in databases and
demonstrate it on the example multi-criteria decision making in the
selection of variants, specified by higher number of technical
parameters.
Abstract: The underground shopping mall has the constructional
problem of the fire evacuation. Also, the people sometimes lose their
direction and information of current time in the mall. If the
emergencies such as terrorist explosions or gas explosions are
happened, they have to go out soon. Under such circumstances, inside
of the mall has high risk for life. In this research, the authors propose a
way that he/she can go out from the underground shopping mall
quickly. If the narrow exits are discovered by using active RFID
(Radio Frequency Identification) tags and using cellular phones, they
can evacuate as soon as possible. To verify this hypothesis, the authors
design the model and carry out the agent-based simulation. They treat,
as a case study, the Tenjin mall in Fukuoka Prefecture in Japan. The
result of the simulation is that the case of the pedestrian with using
active RFID tags and cellular phones reduced the amount of time to
spend on the evacuation. Even if the diffusion of RFID tags and
cellular phones was not perfect, they could show the effectiveness of
reducing the time of evacuation.
Abstract: In this paper, we propose a fast and efficient method for drawing very large-scale graph data. The conventional force-directed method proposed by Fruchterman and Rheingold (FR method) is well-known. It defines repulsive forces between every pair of nodes and attractive forces between connected nodes on a edge and calculates corresponding potential energy. An optimal layout is obtained by iteratively updating node positions to minimize the potential energy. Here, the positions of the nodes are updated every global timestep at the same time. In the proposed method, each node has its own individual time and time step, and nodes are updated at different frequencies depending on the local situation. The proposed method is inspired by the hierarchical individual time step method used for the high accuracy calculations for dense particle fields such as star clusters in astrophysical dynamics. Experiments show that the proposed method outperforms the original FR method in both speed and accuracy. We implement the proposed method on the MDGRAPE-3 PCI-X special purpose parallel computer and realize a speed enhancement of several hundred times.
Abstract: Intelligent Transportation System integrates various modern advanced technologies into the ground transportation system, and it will be the goal of urban transport system in the future because of its comprehensive effects. However, it also brings some problems, such as project performance assessment, fairness of benefiting groups, fund management, which are directly related to its operation and implementation. Wuhan has difficulties in organizing transportation because of its nature feature (river and lake), therefore, calling Service of Taxi plays an important role in transportation. This paper researches on calling Service of Taxi in Wuhan, based on quantitative and qualitative analysis. It analyzes its operations management systematically, including business model, finance, usage analysis and users evaluation. As for business model, it is that the government leads the operation at the initial stage, and the third part dominates the operation at the mature stage, which not only eases the pressure of the third part and benefits the spread of the calling service at the initial stage, but also alleviates financial pressure of government and improve the efficiency of the operation at the mature stage. As for finance, it draws that this service will bring heavy financial burden of equipments, but it will be alleviated in the future because of its spread. As for usage analysis, through data comparison, this service can bring some benefits for taxi drivers, and time and spatial distribution of usage have certain features. As for user evaluation, it analyzes using group and the reason why choosing it. At last, according to the analysis above, the paper puts forward the potentials, limitations, and future development strategies for it.
Abstract: The future of business intelligence (BI) is to integrate
intelligence into operational systems that works in real-time
analyzing small chunks of data based on requirements on continuous
basis. This is moving away from traditional approach of doing
analysis on ad-hoc basis or sporadically in passive and off-line mode
analyzing huge amount data. Various AI techniques such as expert
systems, case-based reasoning, neural-networks play important role
in building business intelligent systems. Since BI involves various
tasks and models various types of problems, hybrid intelligent
techniques can be better choice. Intelligent systems accessible
through web services make it easier to integrate them into existing
operational systems to add intelligence in every business processes.
These can be built to be invoked in modular and distributed way to
work in real time. Functionality of such systems can be extended to
get external inputs compatible with formats like RSS. In this paper,
we describe a framework that use effective combinations of these
techniques, accessible through web services and work in real-time.
We have successfully developed various prototype systems and done
few commercial deployments in the area of personalization and
recommendation on mobile and websites.
Abstract: This work presents the first results from the long-term laboratory experiment dealing with impact of drought on soil properties. Three groups of the treatment (A, B and C) with different regime of irrigation were prepared. The soil water content was maintained at 70 % of soil water holding capacity in group A, at 40 % in group B. In group C, soil water regime was maintained in the range of wilting point. Each group of the experiment was divided into three variants (A1 = B1, C1; A2 = B2, C2 etc.) with three repetitions: Variants A1 (B1, C1) were a controls without addition of another fertilizer. Variants A2 (B2, C2) were fertilized with mineral nitrogen fertilizer DAM 390 (0.140 Mg of N per ha) and variants A3 (B3, C3) contained 45 g of Cp per a pot.
The significant differences (ANOVA, P
Abstract: The motion planning procedure described in this paper has been developed in order to eliminate or reduce the residual vibrations of electromechanical positioning systems, without augmenting the motion time (usually imposed by production requirements), nor introducing overtime for vibration damping. The proposed technique is based on a suitable choice of the motion law assigned to the servomotor that drives the mechanism. The reference profile is defined by a Bezier curve, whose shape can be easily changed by modifying some numerical parameters. By means of an optimization technique these parameters can be modified without altering the continuity conditions imposed on the displacement and on its time derivatives at the initial and final time instants.
Abstract: The need for Information Security in organizations, regardless of their type and size, is being addressed by emerging standards and recommended best practices. The various standards and practices which evolved in recent years and are still being developed and constantly revised, address the issue of Information Security from different angles. This paper attempts to provide an overview of Information Security Standards and Practices by briefly discussing some of the most popular ones. Through a comparative study of their similarities and differences, some insight can be obtained on how their combination may lead to an increased level of Information Security.
Abstract: With the long-term objective of Critical Heat Flux (CHF) prediction, a Direct Numerical Simulation (DNS) framework for simulation of subcooled and saturated nucleate pool boiling is developed. One case of saturated, and three cases of subcooled boiling at different subcooling levels are simulated. Grid refinement study is also reported. Both boiling and condensation phenomena can be computed simultaneously in the proposed numerical framework. Computed bubble detachment diameters of the saturated nucleate pool boiling cases agree well with the experiment. The flow structures around the growing bubble are presented and the accompanying physics is described. The relation between heat flux evolution from the heated wall and the bubble growth is studied, along with investigations of temperature distribution and flow field evolutions.
Abstract: The refueling of a transparent rectangular fuel tank
fitted with a standard filler pipe and roll-over valve was
experimentally studied. A fuel-conditioning cart, capable of
handling fuels of different Reid vapor pressure at a constant
temperature, was used to dispense fuel at the desired rate. The
experimental protocol included transient recording of the tank and
filler tube pressures while video recording the flow patterns in the
filler tube and tank during the refueling process. This information
was used to determine the effect of changes in the vent tube
diameter, fuel-dispense flow rate and fuel Reid vapor pressure on the
pressure-time characteristics and the occurrence of premature fuel
filling shut-off and fuel spill-back. Pressure-time curves for the case
of normal shut-off demonstrated the classic, three-phase
characteristic noted in the literature. The variation of the maximum
values of tank dome and filler tube pressures are analyzed in relation
to the occurrence of premature shut-off.