Abstract: A noble low NOx combustion technology, based on
partial oxidation combustion concept in a fuel rich combustion zone, is
successfully applied in this research. The burner is designed such that
a portion of fuel is heated and pre-vaporized in the furnace then
injected into a fuel rich combustion zone so that a partial oxidation
reaction occurs. The effects of equivalence ratio, thermal load, and
fuel distribution ratio on the emissions of NOx and CO are
experimentally investigated. This newly developed combustion
technology showed very low NOx emission level, about 12 ppm, when
light oil is used as a fuel.
Abstract: 3D part library is an ideal approach to reuse the
existing design and thus facilitates the modeling process, which will
enhance the efficiency. In this paper, we implemented the thought on
the SolidWorks platform. The system supports the functions of type
and parameter selection, 3D template driving and part assembly.
Finally, BOM is exported in Excel format. Experiment shows that our
method can satisfy the requirement of die and mold designers.
Abstract: In the present work, hydrogen gas sensor of modest
sensitivity utilizing functionalized multiwalled carbon nanotubes
partially decorated with tin oxide nanoparticles (F-MWCNTs/SnO2)
has been fabricated. This sensing material was characterized by
scanning electron microscopy (SEM). In addition, a remarkable
finding was that the F-MWCNTs/SnO2 sensor shows good sensitivity
as compared to F-MWCNTs for low concentration (0.05-1% by
volume) of H2 gas. The fabricated sensors show complete resistance
recovery and good repeatability when exposed to H2 gas at the room
temperature conditions.
Abstract: In this paper two approaches to joint signal detection,
time of arrival (ToA) and angle of arrival (AoA) estimation in
multi-element antenna array are investigated. Two scenarios were
considered: first one, when the waveform of the useful signal
is known a priori and, second one, when the waveform of the
desired signal is unknown. For first scenario, the antenna array
signal processing based on multi-element matched filtering (MF)
with the following non-coherent detection scheme and maximum
likelihood (ML) parameter estimation blocks is exploited. For second
scenario, the signal processing based on the antenna array elements
covariance matrix estimation with the following eigenvector analysis
and ML parameter estimation blocks is applied. The performance
characteristics of both signal processing schemes are thoroughly
investigated and compared for different useful signals and noise
parameters.
Abstract: The parameters of a two-layer soil can be determined by
processing resistivity data obtained from resistivity measurements
carried out on the soil of interest. The processing usually entails
applying the resistivity data as inputs to an optimisation function.
This paper proposes an algorithm which utilises the square error as an
optimisation function. Resistivity data from previous works were
applied to test the accuracy of the new algorithm developed and the
result obtained conforms significantly to results from previous works.
Abstract: A novel simulation method to determine the
displacements of machine tools due to thermal factors is presented.
The specific characteristic of this method is the employment of
original CAD data from the design process chain, which is
interpreted by an algorithm in terms of geometry-based allocation of
convection and radiation parameters. Furthermore analogous models
relating to the thermal behaviour of machine elements are
automatically implemented, which were gained by extensive
experimental testing with thermography imaging. With this a
transient simulation of the thermal field and in series of the
displacement of the machine tool is possible simultaneously during
the design phase. This method was implemented and is already used
industrially in the design of machining centres in order to improve
the quality of herewith manufactured workpieces.
Abstract: Identification and selection of appropriate product and
manufacturing technologies are key factors for competitiveness and
market success of technology-based companies. Therefore, many
companies perform technology intelligence (TI) activities to ensure
the identification of evolving technologies at the right time.
Technology monitoring is one of the three base activities of TI,
besides scanning and scouting.
As the technological progress is accelerating, more and more
technologies are being developed. Against the background of limited
resources it is therefore necessary to focus TI activities. In this paper
we propose a concept for defining appropriate search fields for
technology monitoring. This limitation of search space leads to more
concentrated monitoring activities. The concept will be introduced
and demonstrated through an anonymized case study conducted
within an industry project at the Fraunhofer Institute for Production
Technology IPT.
The described concept provides a customized monitoring
approach, which is suitable for use in technology-oriented companies.
It is shown in this paper that the definition of search fields and search
tasks are suitable methods to define topics of interest and thus to
align monitoring activities. Current as well as planned product,
production and material technologies and existing skills, capabilities
and resources form the basis for derivation of relevant search areas.
To further improve the concept of technology monitoring the
proposed concept should be extended during future research e.g. by
the definition of relevant monitoring parameters.
Abstract: This paper explores the effects of gamification on
lower secondary school students’ motivation and engagement in the
classroom. Two-group posttest-only experimental design were
employed to study the influence of gamification teaching method
(GTM) when compared with conventional teaching method (CTM)
on 60 lower secondary school students. The Student Engagement
Instrument (SEI) and Intrinsic Motivation Inventory (IMI) were used
to assess students’ intrinsic motivation and engagement level towards
the respective teaching method. Finding indicates that students who
completed the GTM lesson were significantly higher in intrinsic
motivation to learn than those from the CTM. Although the result
were insignificant and only marginal difference in the engagement
mean, GTM still show better potential in raising student’s
engagement in class when compared with CTM. This finding proves
that the GTM is likely to solve the current issue of low motivation to
learn and low engagement in class among lower secondary school
students in Malaysia. On the other hand, despite being not significant,
higher mean indicates that CTM positively contribute to higher peer
support for learning and better teacher and student relationship when
compared with GTM. As a conclusion, gamification approach is
flexible and can be adapted into many learning content to enhance the
intrinsic motivation to learn and to some extent, encourage better
student engagement in class.
Abstract: A study was conducted to determine the diversity and
abundance of shorebird species habituating the mudflat area of Jeram
Beach and Remis Beach, Selangor, Peninsular Malaysia. Direct
observation technique (using binoculars and video camera) was
applied to record the presence of bird species in the sampling sites
from August 2013 until July 2014. A total of 32 species of shorebird
were recorded during both migratory and non-migratory seasons. Of
these, eleven species (48%) are migrants, six species (26%) have both
migrant and resident populations, four species (17%) are vagrants and
two species (9%) are residents. The compositions of the birds
differed significantly in all months (χ2 = 84.35, p < 0.001). There is a
significant difference in avian abundance between migratory and
non-migratory seasons (Mann-Whitney, t = 2.39, p = 0.036). The
avian abundance were differed significantly in Jeram and Remis
Beaches during migratory periods (t = 4.39, p = 0.001) but not during
non-migratory periods (t = 0.78, p = 0.456). Shorebird diversity was
also affected by tidal cycle. There is a significance difference
between high tide and low tide (Mann-Whitney, t = 78.0, p < 0.005).
Frequency of disturbance also affected the shorebird distribution
(Mann-Whitney, t = 57.0, p = 0.0134). Therefore, this study
concluded that tides and disturbances are two factors that affecting
temporal distribution of shorebird in mudflats area.
Abstract: This research aims to investigate callus induction,
somatic embryogenesis and indirect plant regeneration of Crassula
ovata (Mill.) Druce – the famous ornamental plant. Experiment no.1:
Callus induction was obtained from leaf and stem explants on
Murashige and Skoog (MS) medium supplemented with various plant
growth regulators (PGRs). Effects of different PGRs, plant
regeneration and subsequent plantlet conversion were also assessed.
Indirect plant regeneration was achieved from the callus of stem
explants by the addition of 1.5 mg/L Kinetin (KN) alone. Best shoot
induction was achieved (6.5 shoots/per explant) after 60 days. For
successful rooting, regenerated plantlets were sub-cultured on the
same MS media supplemented with 1.5 mg/L KN alone. The rooted
plantlets were acclimatized and the survival rate was 90%.
Experiment no.2: Results revealed that 0.5 mg/L 2,4-D alone and in
combination with 1.0 mg/L 6-Benzyladenine (BA) gave 89.8% callus
from the stem explants as compared to leaf explants. Callus
proliferation and somatic embryo formation were also evaluated by
‘Double Staining Method’ and different stages of somatic
embryogenesis were revealed by scanning electron microscope. Full
Strength MS medium produced the highest number (49.6%) of
cotyledonary stage somatic embryos (SEs). Mature cotyledonary
stage SEs developed into plantlets after 12 weeks of culture. Wellrooted
plantlets were successfully acclimatized at the survival rate of
85%. Indirectly regenerated plants did not show any detectable
variation in morphological and growth characteristics when
compared with the donor plant.
Abstract: This paper presents a method for the efficient
implementation of a unidirectional or bidirectional DC/DC converter.
The DC/DC converter is used essentially for energy exchange
between the low voltage service battery and a high voltage battery
commonly found in Electric Vehicle applications. In these
applications, apart from cost, efficiency of design is an important
characteristic. A useful way to reduce the size of electronic
equipment in the electric vehicles is proposed in this paper. The
technique simplifies the mechanical complexity and maximizes the
energy usage using the latest converter control techniques. Moreover
a bidirectional battery charger for hybrid electric vehicles is also
implemented in this paper. Several simulations on the test system
have been carried out in Matlab/Simulink environment. The results
exemplify the robustness of the proposed design methodology in case
of a 1.5 KW DC-DC converter.
Abstract: Ancillary services are support services which are
essential for humanizing and enhancing the reliability and security of
the electric power system. Reactive power ancillary service is one of
the important ancillary services in a restructured electricity market
which determines the cost of supplying ancillary services and finding
of how this cost would change with respect to operating decisions.
This paper presents a new formation that can be used to minimize the
Independent System Operator (ISO)’s total payment for reactive
power ancillary service. The modified power flow tracing algorithm
estimates the availability of reserve reactive power for ancillary
service. In order to find optimum reactive power dispatch,
Biogeography based optimization method (BPO) is proposed. Market
Reactive Clearing Price (MRCP) is then estimated and it encourages
generator companies (GENCOs) to participate in an ancillary service.
Finally, optimal weighting factor and real time utilization factor of
reactive power give the minimum ISO’s total payment. The
effectiveness of proposed design is verified using IEEE 30 bus
system.
Abstract: Nonstandard tests are necessary for analyses and
verification of new developed structural and technological solutions
with application of composite materials. One of the most critical
primary structural parts of a typical aerospace structure is T-joint.
This structural element is loaded mainly in shear, bending, peel and
tension. The paper is focused on the shear loading simulations. The
aim of the work is to obtain a representative uniform distribution of
shear loads along T-joint during the mechanical testing. A new
design of T-joint test procedure, numerical simulation and
optimization of representative boundary conditions are presented.
The different conditions and inaccuracies both in simulations and
experiments are discussed. The influence of different parameters on
stress and strain distributions is demonstrated on T-joint made of
CFRP (carbon fibre reinforced plastic). A special test rig designed by
VZLU (Aerospace Research and Test Establishment) for T-shear test
procedure is presented.
Abstract: Age ratings are very helpful in providing parents with
relevant information for the purchase and use of digital technologies
by the children; this is why the non-definition of age ratings for the
use of ICTs by children in schools is a major concern; and this
problem serves as a motivation for this study whose aim is to
examine the factors affecting the perceptions of educators on the
learners’ youngest age for the introduction of ICTs in schools. This
aim is achieved through two types of research objectives: the
identification and design of theories and models on age ratings, and
the empirical testing of such theories and models in a survey of
educators from the Camperdown district of the South African
KwaZulu-Natal province. A questionnaire is used for the collection
of the data of this survey whose validity and reliability is checked in
SPSS prior to its descriptive and correlative quantitative analysis. The
main hypothesis supporting this research is the association between
the demographics of educators, their personality, and their
perceptions on the learners’ youngest age for the introduction of ICTs
in schools; as claimed by existing research; except that the present
study looks at personality from three dimensions: self-actualized
personalities, fully functioning personalities, and healthy
personalities. This hypothesis was fully confirmed by the empirical
study conducted by this research except for the demographic factor
where only the educators’ grade or class was found to be associated
with the personality of educators.
Abstract: reliability-based methodology for the assessment
and evaluation of reinforced concrete (R/C) structural elements of
concrete structures is presented herein. The results of the reliability
analysis and assessment for R/C structural elements were verified by
the results obtained through deterministic methods. The outcomes of
the reliability-based analysis were compared against currently
adopted safety limits that are incorporated in the reliability indices
β’s, according to international standards and codes. The methodology
is based on probabilistic analysis using reliability concepts and
statistics of the main random variables that are relevant to the subject
matter, and for which they are to be used in the performance-function
equation(s) associated with the structural elements under study.
These methodology techniques can result in reliability index β, which
is commonly known as the reliability index or reliability measure
value that can be utilized to assess and evaluate the safety, human
risk, and functionality of the structural component. Also, these
methods can result in revised partial safety factor values for certain
target reliability indices that can be used for the purpose of
redesigning the R/C elements of the building and in which they could
assist in considering some other remedial actions to improve the
safety and functionality of the member.
Abstract: In this paper, design of solid-state battery/supercapacitor emulator based on dc-dc boost converter is described.
The emulator mimics charging behavior of any storage device based
on a predefined behavior set by the user. The device is operated by a
two-level control structure: high-level emulating controller and low-
level input voltage controller. Simulation and experimental results are
shown to demonstrate the emulator operation.
Abstract: Innovations not only contribute to competitiveness of
the company but have also positive effects on revenues. On average,
product innovations account to 14 percent of companies’ sales.
Innovation management has substantially changed during the last
decade, because of growing reliance on external partners. As a
consequence, a new task for purchasing arises, as firms need to
understand which suppliers actually do have high potential
contributing to the innovativeness of the firm and which do not.
Proper organization of the purchasing function is important since
for the majority of manufacturing companies deal with substantial
material costs which pass through the purchasing function. In the past
the purchasing function was largely seen as a transaction-oriented,
clerical function but today purchasing is the intermediate with supply
chain partners contributing to innovations, be it product or process
innovations. Therefore, purchasing function has to be organized
differently to enable firm innovation potential.
However, innovations are inherently risky. There are behavioral
risk (that some partner will take advantage of the other party),
technological risk in terms of complexity of products and processes
of manufacturing and incoming materials and finally market risks,
which in fact judge the value of the innovation. These risks are
investigated in this work. Specifically, technological risks which deal
with complexity of the products, and processes will be investigated
more thoroughly. Buying components or such high edge technologies
necessities careful investigation of technical features and therefore is
usually conducted by a team of experts. Therefore it is hypothesized
that higher the technological risk, higher will be the centralization of
the purchasing function as an interface with other supply chain
members.
Main contribution of this research lies is in the fact that analysis
was performed on a large data set of 1493 companies, from 25
countries collected in the GMRG 4 survey. Most analyses of
purchasing function are done by case study analysis of innovative
firms. Therefore this study contributes with empirical evaluations that
can be generalized.
Abstract: In order to verify the performance of lunar lander
structure, landing-impact test is urgently needed. And the test
equipment is necessary for the test. The functions and the key points of
the equipment are presented to satisfy the requirements of the test, and
the design scheme is proposed. The composition, the major function
and the critical parts’ design of the equipment are introduced. By the
load test of releasing device and single-beam hoist, and the
compatibility test of landing-impact testing system, the rationality and
reliability of the equipment is proved.
Abstract: Urban greenery remains the bastion of urban
landscape and a key to sustainable development due to its integral
connections to the general health and wellbeing of urban residents.
However, in an era of rapid urbanisation, recent studies indicate that
urban greenery, especially ecologically sensitive areas, in many
African cities is becoming increasingly depleted. Given the scale and
rate of natural and anthropogenic change, effective management of
urban greenery as the ultimate goal of restoring depleting urban
landscapes is urgent. This review advocates for an urban resilience
model to managing urban greenery.
Abstract: The research focus on study, analyze and design the
model of the infrastructure and computer networks for distance
education, online learning via new media, e-learning and blended
learning. The collected information from study and analyze process
that information was evaluated by the index of item objective
congruence (IOC) by 9 specialists to design model. The results of
evaluate the model with the mean and standard deviation by the
sample of 9 specialists value is 3.85. The results showed that the
infrastructure and computer networks are designed to be appropriate
to a great extent appropriate to a great extent.