Abstract: A virtualized and virtual approach is presented on
academically preparing students to successfully engage at a strategic
perspective to understand those concerns and measures that are both
structured and not structured in the area of cyber security and
information assurance. The Master of Science in Cyber Security and
Information Assurance (MSCSIA) is a professional degree for those
who endeavor through technical and managerial measures to ensure
the security, confidentiality, integrity, authenticity, control,
availability and utility of the world-s computing and information
systems infrastructure. The National University Cyber Security and
Information Assurance program is offered as a Master-s degree. The
emphasis of the MSCSIA program uniquely includes hands-on
academic instruction using virtual computers. This past year, 2011,
the NU facility has become fully operational using system
architecture to provide a Virtual Education Laboratory (VEL)
accessible to both onsite and online students. The first student cohort
completed their MSCSIA training this past March 2, 2012 after
fulfilling 12 courses, for a total of 54 units of college credits. The
rapid pace scheduling of one course per month is immensely
challenging, perpetually changing, and virtually multifaceted. This
paper analyses these descriptive terms in consideration of those
globalization penetration breaches as present in today-s world of
cyber security. In addition, we present current NU practices to
mitigate risks.
Abstract: Medical compression bandages are widely used in the
treatment of chronic venous disorder. In order to design effective
compression bandages, researchers have attempted to describe the
interface pressure applied by multi-layer bandages using mathematical
models. This paper reports on the work carried out to
compare and validate the mathematical models used to describe the
interface pressure applied by multi-layer bandages. Both analytical
and experimental results showed that using simple multiplication
of a number of bandage layers with the pressure applied by one
layer of bandage or ignoring the increase in the limb radius due to
former layers of bandage will result in overestimating the pressure.
Experimental results showed that the mathematical models, which
take into consideration the increase in the limb radius due to former
bandage layers, are more accurate than the one which does not.
Abstract: For scores of years now, several microfinance
organizations, non governmental organizations and other welfare
organizations have, with a view to aiding the progress of
communities rooted in poverty have been focusing on creating
microentrepreneurs, besides taking several other measures. In recent
times, business corporations have joined forces to combat poverty by
taking up microenterprise development. Hindustan Unilever Limited
(HUL), the Indian subsidiary of Unilever Limited exemplifies this
through its Project Shakti. The company through the Project creates
rural women entrepreneurs by making them direct to home sales
distributors of its products in villages that have thus far been ignored
by multinational corporations. The members participating in Project
Shakti are largely self help group members. The paper focuses on
assessing the impact made by the company on the members engaged
in Project Shakti. The analysis involves use of quantitative methods
to study the effect of Project Shakti on those self help group
members engaged in Project Shakti and those not engaged with
Project Shakti. Path analysis has been used to study the impact made
on those members engaged in Project Shakti. Significant differences
were observed on fronts of entrepreneurial development, economic
empowerment and social empowerment between members associated
with Project Shakti and those not associated with Project Shakti.
Path analysis demonstrated that involvement in Project Shakti led to
entrepreneurial development resulting in economic empowerment
that in turn led to social empowerment and that these three elements
independently induced a feeling of privilege in the women for being
associated with the Project.
Abstract: Within dental-guided surgery, there has been a lack
of analytical methods for optimizing the treatment of the
rehabilitation concepts regarding geometrical variation. The purpose
of this study is to find the source of the greatest geometrical variation
contributor and sensitivity contributor with the help of virtual
variation simulation of a dental drill- and implant-guided surgery
process using a methodical approach. It is believed that lower
geometrical variation will lead to better patient security and higher
quality of dental drill- and implant-guided surgeries. It was found
that the origin of the greatest contributor to the most variation, and
hence where the foci should be set, in order to minimize geometrical
variation was in the assembly category (surgery). This was also the
category that was the most sensitive for geometrical variation.
Abstract: To investigate the applicability of the EDR-2 film for
clinical radiation dosimetry, percentage depth-doses, profiles and
distributions in open and dynamically wedged fields were measured
using film and compared with data from a Treatment Planning
system.The validity of the EDR2 film to measure dose in a plane
parallel to the beam was tested by irradiating 10 cm×10 cm and 4
cm×4 cm fields from a Siemens, primus linac with a 6MV beam and
a source-to-surface distance of 100 cm. The film was placed
Horizontally between solid water phantom blocks and marked
with pin holes at a depth of 10 cm from the incident beam surface.
The film measurement results, in absolute dose, were compared with
ion chamber measurements using a Welhoffer scanning water tank
system and Treatment Planning system. Our results indicate a
maximum underestimate of calculated dose of 8 % with Treatment
Planning system.
Abstract: A rare phenomenon of SDS-induced activation of a latent protease activity associated with the purified silkworm excretory red fluorescent protein (SE-RFP) was noticed. SE-RFP aliquots incubated with SDS for different time intervals indicated that the protein undergoes an obligatory breakdown into a number of subunits which exhibit autoproteolytic (acting upon themselves) and/or heteroproteolytic (acting on other proteins) activities. A strong serine protease activity of SE-RFP subunits on Bombyx mori nucleopolyhedrovirus (BmNPV) polyhedral protein was detected by zymography technique. A complete inhibition of BmNPV infection to silkworms was observed by the oral administration assay of the SE-RFP. Here, it is proposed that the SE-RFP prevents the initial infection of BmNPV to silkworms by obliterating the polyhedral protein. This is the first report on a silkworm red fluorescent protein that exhibits a protease activity on exposure to SDS. The present studies would help in understanding the antiviral mechanism of silkworm red fluorescent proteins.
Abstract: Game theory could be used to analyze the conflicted
issues in the field of information hiding. In this paper, 2-phase game
can be used to build the embedder-attacker system to analyze the
limits of hiding capacity of embedding algorithms: the embedder
minimizes the expected damage and the attacker maximizes it. In the
system, the embedder first consumes its resource to build embedded
units (EU) and insert the secret information into EU. Then the attacker
distributes its resource evenly to the attacked EU. The expected
equilibrium damage, which is maximum damage in value from the
point of view of the attacker and minimum from the embedder against
the attacker, is evaluated by the case when the attacker attacks a
subset from all the EU. Furthermore, the optimal equilibrium capacity
of hiding information is calculated through the optimal number of EU
with the embedded secret information. Finally, illustrative examples
of the optimal equilibrium capacity are presented.
Abstract: This paper describes the pipeline architecture of
high-speed modified Booth multipliers. The proposed multiplier
circuits are based on the modified Booth algorithm and the pipeline
technique which are the most widely used to accelerate the
multiplication speed. In order to implement the optimally pipelined
multipliers, many kinds of experiments have been conducted. The
speed of the multipliers is greatly improved by properly deciding the
number of pipeline stages and the positions for the pipeline registers to
be inserted. We described the proposed modified Booth multiplier
circuits in Verilog HDL and synthesized the gate-level circuits using
0.13um standard cell library. The resultant multiplier circuits show
better performance than others. Since the proposed multipliers operate
at GHz ranges, they can be used in the systems requiring very high
performance.
Abstract: This paper presents the results of corrosion fatigue
crack growth behaviour of a Ni-Cr-Mn steel commonly used in
marine applications. The effect of mechanical variables such as
frequency and load ratio on fatigue crack growth rate at various
stages has been studied using compact tension (C(T)) specimens
along the rolling direction of steel plate under 3.5% saturated NaCl
aqueous environment. The significance of crack closure on corrosion
fatigue, and the validity of Elber-s empirical linear crack closure
model with the ASTM compliance offset method have been
examined.
Fatigue crack growth rate is higher and threshold stress intensities
are lower in aqueous environment compared to the lab air conditions.
It is also observed that the crack growth rate increases at lower
frequencies. The higher stress ratio promotes the crack growth. The
effect of oxidization and corrosion pit formation is very less as the
stress ratio is increased. It is observed that as stress ratios are
increased, the Elber-s crack closure model agrees well with the crack
closure estimated by the ASTM compliance offset method for tests
conducted at 5Hz frequency compared to tests conducted at 1Hz in
corrosive environment.
Abstract: Flow around a flat tube is studied numerically. Reynolds number is defined base on equivalent circular tube and it is varied in range of 100 to 300. Equations are solved by using finite volume method and results are presented in form of drag and lift coefficient. Results show that drag coefficient of flat tube is up to 66% lower than circular tube with equivalent diameter. In addition, by increasing l/D from 1 to 2, the drag coefficient of flat tube is decreased about 14-27%.
Abstract: To improve the efficiency of parametric studies or
tests planning the method is proposed, that takes into account all input parameters, but only a few simulation runs are performed to
assess the relative importance of each input parameter. For K input
parameters with N input values the total number of possible combinations of input values equals NK. To limit the number of runs,
only some (totally N) of possible combinations are taken into account. The sampling procedure Updated Latin Hypercube
Sampling is used to choose the optimal combinations. To measure the
relative importance of each input parameter, the Spearman rank
correlation coefficient is proposed. The sensitivity and the influence
of all parameters are analyzed within one procedure and the key
parameters with the largest influence are immediately identified.
Abstract: Authentication plays a vital role in many secure
systems. Most of these systems require user to log in with his or her
secret password or pass phrase before entering it. This is to ensure all
the valuables information is kept confidential guaranteeing also its
integrity and availability. However, to achieve this goal, users are
required to memorize high entropy passwords or pass phrases.
Unfortunately, this sometimes causes difficulty for user to remember
meaningless strings of data. This paper presents a new scheme which
assigns a weight to each personal question given to the user in
revealing the encrypted secrets or password. Concentration of this
scheme is to offer fault tolerance to users by allowing them to forget
the specific password to a subset of questions and still recover the
secret and achieve successful authentication. Comparison on level of
security for weight-based and weightless secret recovery scheme is
also discussed. The paper concludes with the few areas that requires
more investigation in this research.
Abstract: This paper explores the social and political imperatives in the sphere of public policy relating to social justice. In India, the colonial legacy and post-colonial social and political pressures sustained the appropriation of 'caste' category in allocating public resources to the backward class of citizens. For several reasons, 'economic' category could not be placed in allocating resources. This paper examines the reasons behind the deliberative exercises and formulating policies and seeks an alternative framework in realizing social justice in terms of a unified category. This attempt can be viewed as a reconciliation of traditional and modern values for a viable alternative in public policy making.
Abstract: Segmentation of a color image composed of different
kinds of regions can be a hard problem, namely to compute for an
exact texture fields. The decision of the optimum number of
segmentation areas in an image when it contains similar and/or un
stationary texture fields. A novel neighborhood-based segmentation
approach is proposed. A genetic algorithm is used in the proposed
segment-pass optimization process. In this pass, an energy function,
which is defined based on Markov Random Fields, is minimized. In
this paper we use an adaptive threshold estimation method for image
thresholding in the wavelet domain based on the generalized
Gaussian distribution (GGD) modeling of sub band coefficients. This
method called Normal Shrink is computationally more efficient and
adaptive because the parameters required for estimating the threshold
depend on sub band data energy that used in the pre-stage of
segmentation. A quad tree is employed to implement the multi
resolution framework, which enables the use of different strategies at
different resolution levels, and hence, the computation can be
accelerated. The experimental results using the proposed
segmentation approach are very encouraging.
Abstract: Process measurement is the task of empirically and objectively assigning numbers to the properties of business processes in such a way as to describe them. Desirable attributes to study and measure include complexity, cost, maintainability, and reliability. In our work we will focus on investigating process complexity. We define process complexity as the degree to which a business process is difficult to analyze, understand or explain. One way to analyze a process- complexity is to use a process control-flow complexity measure. In this paper, an attempt has been made to evaluate the control-flow complexity measure in terms of Weyuker-s properties. Weyuker-s properties must be satisfied by any complexity measure to qualify as a good and comprehensive one.
Abstract: An optimal control of Reverse Osmosis (RO) plant is
studied in this paper utilizing the auto tuning concept in conjunction
with PID controller. A control scheme composing an auto tuning
stochastic technique based on an improved Genetic Algorithm (GA) is
proposed. For better evaluation of the process in GA, objective
function defined newly in sense of root mean square error has been
used. Also in order to achieve better performance of GA, more
pureness and longer period of random number generation in operation
are sought. The main improvement is made by replacing the uniform
distribution random number generator in conventional GA technique
to newly designed hybrid random generator composed of Cauchy
distribution and linear congruential generator, which provides
independent and different random numbers at each individual steps in
Genetic operation. The performance of newly proposed GA tuned
controller is compared with those of conventional ones via simulation.
Abstract: With the rapid advanced of technology, the industrial processes become increasingly demanding, from the point of view, power quality and controllability. The advent of multi levels inverters responds partially to these requirements. But actually, the new generation of multi-cells inverters permits to reach more performances, since, it offers more voltage levels. The disadvantage in the increase of voltage levels by the number of cells in cascades is on account of series igbts synchronisation loss, from where, a limitation of cells in cascade to 4. Regarding to these constraints, a new topology is proposed in this paper, which increases the voltage levels of the three-cell inverter from 4 to 8; with the same number of igbts, and using less stored energy in the flaying capacitors. The details of operation and modelling of this new inverter structure are also presented, then tested thanks to a three phase induction motor. KeywordsFlaying capacitors, Multi-cells inverter, pwm, switchers, modelling.
Abstract: Small and Medium Sized Enterprises (SMEs) play an important role in many economies. In New Zealand, for example, 97% of all manufacturing companies employ less than 100 staff, and generate the predominant part of this industry sector-s economic output. Manufacturing SMEs as a group also have a significant impact on the environment. This situation is similar in many developed economies, including the European Union. Sustainable economic development therefore needs to strongly consider the role of manufacturing SMEs, who generally find it challenging to move towards more environmentally friendly business practices. This paper presents a systems thinking approach to modelling and understanding the factors which have an influence on the successful uptake of environmental practices in small and medium sized manufacturing companies. It presents a number of causal loop diagrams which have been developed based on primary action research, and a thorough understanding of the literature in this area. The systems thinking model provides the basis for further development of a strategic framework for the successful uptake of environmental innovation in manufacturing SMEs.
Abstract: Extensive research has been devoted to economic
production quantity (EPQ) problem. However, no attention has been
paid to problems where production period length is constrained. In
this paper, we address the problem of deciding the optimal
production quantity and the number of minor setups within each
cycle, in which, production period length is constrained but a minor
setup is possible for pass the constraint. A mathematical model is
developed and Iterated Local Search (ILS) is proposed to solve this
problem. Finally, solution procedure illustrated with a numerical
example and results are analyzed.
Abstract: In this paper, we propose an efficient hierarchical DNA
sequence search method to improve the search speed while the
accuracy is being kept constant. For a given query DNA sequence,
firstly, a fast local search method using histogram features is used as a
filtering mechanism before scanning the sequences in the database.
An overlapping processing is newly added to improve the robustness
of the algorithm. A large number of DNA sequences with low
similarity will be excluded for latter searching. The Smith-Waterman
algorithm is then applied to each remainder sequences. Experimental
results using GenBank sequence data show the proposed method
combining histogram information and Smith-Waterman algorithm is
more efficient for DNA sequence search.