Abstract: We propose a code acquisition scheme called improved
multiple-shift (IMS) for optical code division multiple access
systems, where the optical orthogonal code is used instead of the
pseudo noise code. Although the IMS algorithm has a similar process
to that of the conventional MS algorithm, it has a better code
acquisition performance than the conventional MS algorithm. We
analyze the code acquisition performance of the IMS algorithm and
compare the code acquisition performances of the MS and the IMS
algorithms in single-user and multi-user environments.
Abstract: Internet financial reporting and corporate governance
issues are in the focus of academic and professional studies due to
their attributed importance by stakeholders of corporations. Major
aim of this study is to reveal the relationship between internet
financial reporting which is held as dependent variable and some
indicators of corporate governance such as the ratio of managerial
ownership, blockholder ownership, number of independent members
in the board of directors, frequency of meetings by audit committee
and education level of audit committee members which are held as
independent variables. Main purpose is to reveal the effect of
corporate governance on the voluntary efforts of Internet Financial
reporting. The scope of the research is limited to the Turkish
Corporations listed in Borsa Istanbul (Istanbul Stock Exchange) and
findings which are generated by means of SPSS software are revealed
in results section and interpreted in conclusions.
Abstract: Unmanned aircraft systems (UAS) are playing
increasingly prominent roles in defense programs and defense
strategies around the world. Technology advancements have
enabled the development of it to do many excellent jobs as
reconnaissance, surveillance, battle fighters, and communications
relays. Simulating a small unmanned aerial vehicle (SUAV)
dynamics and analyzing its behavior at the preflight stage is too
important and more efficient. The first step in the UAV design is
the mathematical modeling of the nonlinear equations of motion. .
In this paper, a survey with a standard method to obtain the full
non-linear equations of motion is utilized, and then the
linearization of the equations according to a steady state flight
condition (trimming) is derived. This modeling technique is
applied to an Ultrastick-25e fixed wing UAV to obtain the valued
linear longitudinal and lateral models. At the end the model is
checked by matching between the behavior of the states of the nonlinear
UAV and the resulted linear model with doublet at the
control surfaces.
Abstract: Nowadays, it is a globalization era which social media
plays an important role to the lifestyle as an information source, tools
to connect people together and etc. This research is object to find out
about the significant level of the social media as a distribution
channel to the agriculture product of Thailand. In this research, the
agriculture product is the Rice Berry which is the cross-bred unmilled
rice producing dark violet grain, is a combination of Hom Nin Rice
and Thai Jasmine/ Fragrant Rice 105. Rice Berry has a very high
nutrition and nice aroma so the product is in the growth stage of the
product cycle. The problem for the Rice Berry product in Thailand is
the production and the distribution channel. This study is to confirm
that the social media is another option as the distribution channel for
the product which is not a mass production product. This will be the
role model for the other niche market product to select the
distribution channel.
Abstract: Learning Management System (LMS) is the system
which uses to manage the learning in order to grouping the content
and learning activity between the lecturer and learner including
online examination and evaluation. Nowadays, it is the borderless
learning era so the learning activities can be accessed from
everywhere in the world and also anytime via the information
technology and media. The learner can easily access to the
knowledge so the different in time and distance is not a constraint for
learning anymore.
The learning pattern which was used in this research is the
integration of the in-class learning and online learning via internet
and will be able to monitor the progress by the Learning management
system which will create the fast response and accessible learning
process via the social media. In order to increase the capability and
freedom of the learner, the system can show the current and history
of the learning document, video conference and also has the chat
room for the learner and lecturer to interact to each other.
So the objectives of the “The Design and Applied of Learning
Management System via Social Media on Internet: Case Study of
Operating System for Business Subject” are to expand the
opportunity of learning and to increase the efficiency of learning as
well as increase the communication channel between lecturer and
student. The data of this research was collect from 30 users of the
system which are students who enroll in the subject. And the result of
the research is in the “Very Good” which is conformed to the
hypothesis.
Abstract: Absorptive capacity generally facilitates the adoption
of innovation. How does this relationship change when economic
return is not the sole driver of innovation uptake? We investigate
whether absorptive capacity facilitates the adoption of green
innovation based on a survey of 79 construction companies in
Scotland. Based on the results of multiple regression analyses, we
confirm that existing knowledge utilisation (EKU), knowledge
building (KB) and external knowledge acquisition (EKA) are
significant predictors of green process GP), green administrative
(GA) and green technical innovation (GT), respectively. We discuss
the implications for theories of innovation adoption and knowledge
enhancement associated with environmentally-friendly practices.
Abstract: A nanocrystalline thin film of ZnSe was successfully
electrodeposited on copper substrate using a non-aqueous solution
and subsequently annealed in air at 400°C. XRD analysis indicates
the polycrystalline deposit of (111) plane in both the cases. The
sharpness of the peak increases due to annealing of the film and
average grain size increases to 20 nm to 27nm. SEM photograph
indicate that grains are uniform and densely distributed over the
surface. Annealing increases the average grain size by 20%. The EDS
spectroscopy shows the ratio of Zn & Se is 1.1 in case of annealed
film. AFM analysis indicates the average roughness of the film
reduces from 181nm to 165nm due to annealing of the film. The
bandgap also decreases from 2.71eV to 2.62eV.
Abstract: In review the generalized data about different methods
of synthesis of biological activity halogenated di-, tri- and tetrahydroxyanthraquinones
is presented. The basic regularity of a
synthesis is analyzed. Action of temperature, pH, solubility, catalysts
and other factors on a reaction product yield is revealed.
Abstract: The purpose of this paper is to describe the
perceptions of knowledge and information sharing by the Polish
academic community. An electronic questionnaire was used to gather
opinions of respondents. The presented results are a part of the
findings of empirical studies carried out amongst academics from
various types of universities and academia located throughout
Poland.
Abstract: Potato (Solanum tuberosum L.) is one of the major
vegetable crops that are grown world –wide because of its economic
importance. This experiment investigated the effect of local sands
(River Base, Al-Ekader and Karbala) on number and total weight of
minitubers. Statistical analysis revealed that there were no significant
differences among sand cultures in number of stem/plant, chlorophyll
index and tubers dry weight. River Base sand had the highest plant
height (74.9 cm), leaf number/plant number (39.3), leaf area (84.4
dcm2⁄plant), dry weight/plant (26.31), tubers number/plant (8.5),
tubers weight/plant (635.53 gm) and potato tuber yields/trove (28.60
kg), whereas the Karbala sand had lower performance. All the
characters had positive and significant correlation with yields except
the traits number of stem and tuber dry weight.
Abstract: This study aims to analyze ceramic employees’
occupational health and safety training expectations. To that general
objective, the study tries to examine whether occupational health and
safety training expectations of ceramic employees meaningfully
differentiate depending on demographic features and professional,
social and economic conditions. For this purpose, a questionnaire was
developed by the researcher. The research data were collected
through this questionnaire called “Questionnaire of Occupational
Health and Safety Training Expectation” (QSOHSTE). QSOHSTE
was applied to 125 ceramic employees working in Kütahya, Turkey.
Data obtained from questionnaire were analyzed via SPSS 21.
The findings, obtained from the study, revealed that employees’
agreement level to occupational health and safety training expectation
statements is generally high-level. The findings reveal that employees
expect professional interest such as increased development and
investment, preventive measures for accidents, interventions to
evaluate the working conditions, establishment of safe working
environments and sustainment of adequate equipment for
occupational health and safety training process.
Besides these findings, employees’ agreement level to
occupational health and safety training expectation statements also
varies in terms of educational level, professional seniority, income
level and perception of economic condition.
Abstract: While millings materials from old pavement surface
can be an important component of cost effective maintenance
operation, their use in maintenance projects are not uniform and well
documented. This study documents the different maintenance
practices followed by four transportation districts of New Mexico
Department of Transportation (NMDOT) in an attempt to find
whether millings are being used in maintenance projects by those
districts. Based on existing literature, a questionnaire was developed
related to six common maintenance practices. NMDOT district
personal were interviewed face to face to discuss and get answers to
that questionnaire. It revealed that NMDOT districts mainly use chip
seal and patching. Other maintenance procedures such as sand seal,
scrub seal, slurry seal, and thin overlay have limited use. Two out of
four participating districts do not have any documents on chip
sealing; rather they employ the experiences of the chip seal crew. All
districts use polymer modified high float emulsion (HFE100P) for
chip seal with an application rate ranging from 0.4 to 0.56 gallons per
square yard. Chip application rate varies from 15 to 40 lb/ square
yard. State wide, the thickness of chip seal varies from 3/8'' to 1'' and
life varies from 3 to 10 years. NMDOT districts mainly use three type
of patching: pothole, dig-out and blade patch. Pothole patches are
used for small potholes and during emergency, dig-out patches are
used for all type of potholes sometimes after pothole patching, and
blade patch is used when a significant portion of the pavement is
damaged. Pothole patches last as low as three days whereas, blade
patch lasts as long as 3 years. It was observed that all participating
districts use millings in maintenance projects.
Abstract: The rhizome of Java grass, Cyperus rotundus was
extracted different organic polar and non-polar solvents and
performed the in vitro antiviral and immunostimulant activities
against White Spot Syndrome Virus (WSSV) and Vibrio harveyi
respectively. Based on the initial screening the ethyl acetate extract of
C. rotundus was strong activities and further it was purified through
silica column chromatography and the fractions were screened again
for antiviral and immunostimulant activity. Among the different
fractions screened against the WSSV and V. harveyi, the fractions, FIII
to FV had strong activities. In order to study the in vivo influence
of C. rotundus, the fractions (F-III to FV) were pooled and delivered
to the F. indicus through artificial feed for 30 days. After the feeding
trail the experimental and control diet fed F. indicus were challenged
with virulent WSSV and studied the survival, molecular diagnosis,
biochemical, haematological, and immunological parameters.
Surprisingly, the pooled fractions (F-IV to FVI) incorporated diets
helped to significantly (P
Abstract: This paper proposes a rotational invariant texture
feature based on the roughness property of the image for psoriasis
image analysis. In this work, we have applied this feature for image
classification and segmentation. The fuzzy concept is employed to
overcome the imprecision of roughness. Since the psoriasis lesion is
modeled by a rough surface, the feature is extended for calculating
the Psoriasis Area Severity Index value. For classification and
segmentation, the Nearest Neighbor algorithm is applied. We have
obtained promising results for identifying affected lesions by using
the roughness index and severity level estimation.
Abstract: This experimental study evaluates the effect of using
Cognitive-Behavioral Therapy (CBT) and Multidimensional Self-
Concept Model (MSCM) in a drug prevention programme to increase
resiliency and reduce aggression among at-risk youth in Malaysia. A
number of 60 (N=60) university students who were at-risk of taking
drugs were involved in this study. Participants were identified with
self-rating scales, Adolescent Resilience Attitude Scale (ARAS) and
Aggression Questionnaire. Based on the mean score of these
instruments, the participants were divided into the treatment group,
and the control group. Data were analyzed using t-test. The finding
showed that the mean score of resiliency was increased in the
treatment group compared to the control group. It also shows that the
mean score of aggression was reduced in the treatment group
compared to the control group. Drug Prevention Programme was
found to help in enhancing resiliency and reducing aggression among
participants in the treatment group compared to the controlled group.
Implications were given regarding the preventive actions on drug
abuse among youth in Malaysia.
Abstract: Standard processes, similar and limited production
lines, the production of high direct costs will be more accurate than
the use of parts of the traditional cost systems in the literature.
However, direct costs, overhead expenses, in turn, decrease the
burden of increasingly sophisticated production facilities, a situation
that led the researchers to look for the cost of traditional systems of
alternative techniques. Variety cost management approaches for
example Total quality management (TQM), just-in-time (JIT),
benchmarking, kaizen costing, targeting cost, life cycle costs (LLC),
activity-based costing (ABC) value engineering have been
introduced. Management and cost applications have changed over the
past decade and will continue to change. Modern cost systems can
provide relevant and accurate cost information. These methods
provide the decisions about customer, product and process
improvement. The aim of study is to describe and explain the
adoption and application of costing systems in SME. This purpose
reports on a survey conducted during 2014 small and medium sized
enterprises (SME) in Ankara. The survey results were evaluated
using SPSS18 package program.
Abstract: The English competence of Thai people was examined
in the context of knowledge of English in everyday life for Small and
Medium Entrepreneurs (SMEs), and also integrated with Second
language acquisition (SLA) students’ classroom. Second language
acquisition was applied to the results of the questionnaires and
interview forms. Levels of the need on English used for SME
entrepreneurs in Thailand, satisfaction on joining the street classroom
project were shown to be significantly high for some certain language
functions and satisfaction. Finding suggests that the language
functions on etiquette for professional use is essential and useful
because lesson learned can be used in the real situation for their
career. Implications for the climate of the street classroom are
discussed.
Abstract: Living today in turbulent business environment forces
companies to distinguish from each other, securing sustainable
competitive growth and competitive advantage. The best possible
solution is to invest (effort and financial resources) within
companies’ different practices of human resource management
(HRM), more specifically in employees’ knowledge, skills and
abilities. Applying this approach companies will create enviable level
of human capital securing its economic growth. Employees become
human capital for their employers at the moment when they
contribute with their own knowledge and abilities in creating material
and non-material value of the company. The main aim of this
research is to explore the relations between human capital
investments and business excellence of Croatian companies.
Furthermore, the differences in the level of human capital
investments with regard to several companies’ characteristics (e.g.
size of the company, ownership and type of the industry) are
investigated.
Abstract: This study aims to investigate the possibility of crime
prevention through CCTV by analyzing the appropriateness of the
CCTV location, whether it is installed in the hotspot of crime-prone
areas, and exploring the crime prevention effect and transition effect.
The real crime and CCTV locations of case city were converted into
the spatial data by using GIS. The data was analyzed by hotspot
analysis and weighted displacement quotient (WDQ). As study
methods, it analyzed existing relevant studies for identifying the trends
of CCTV and crime studies based on big data from 1800 to 2014 and
understanding the relation between CCTV and crime. Second, it
investigated the current situation of nationwide CCTVs and analyzed
the guidelines of CCTV installation and operation to draw attention to
the problems and indicating points of CCTV use. Third, it investigated
the crime occurrence in case areas and the current situation of CCTV
installation in the spatial aspects, and analyzed the appropriateness and
effectiveness of CCTV installation to suggest a rational installation of
CCTV and the strategic direction of crime prevention. The results
demonstrate that there was no significant effect in the installation of
CCTV on crime prevention in the case area. This indicates that CCTV
should be installed and managed in a more scientific way reflecting
local crime situations. In terms of CCTV, the methods of spatial
analysis such as GIS, which can evaluate the installation effect, and the
methods of economic analysis like cost-benefit analysis should be
developed. In addition, these methods should be distributed to local
governments across the nation for the appropriate installation of
CCTV and operation. This study intended to find a design guideline of
the optimum CCTV installation. In this regard, this study is
meaningful in that it will contribute to the creation of a safe city.
Abstract: A Disaster Management System (DMS) is very important for countries with multiple disasters, such as Chile. In the world (also in Chile)different disasters (earthquakes, tsunamis, volcanic eruption, fire or other natural or man-made disasters) happen and have an effect on the population. It is also possible that two or more disasters occur at the same time. This meansthata multi-risk situation must be mastered. To handle such a situation a Decision Support System (DSS) based on multiagents is a suitable architecture. The most known DMSs are concernedwith only a singledisaster (sometimes thecombination of earthquake and tsunami) and often with a particular disaster. Nevertheless, a DSS helps for a better real-time response. Analyze the existing systems in the literature and expand them for multi-risk disasters to construct a well-organized system is the proposal of our work. The here shown work is an approach of a multi-risk system, which needs an architecture and well defined aims. In this moment our study is a kind of case study to analyze the way we have to follow to create our proposed system in the future.