Abstract: This paper presents Simulated Annealing based
approach to estimate solar cell model parameters. Single diode solar
cell model is used in this study to validate the proposed approach
outcomes. The developed technique is used to estimate different
model parameters such as generated photocurrent, saturation current,
series resistance, shunt resistance, and ideality factor that govern the
current-voltage relationship of a solar cell. A practical case study is
used to test and verify the consistency of accurately estimating
various parameters of single diode solar cell model. Comparative
study among different parameter estimation techniques is presented
to show the effectiveness of the developed approach.
Abstract: The aim of this study was to investigate the pregnancy
outcomes of teenage mothers at DanKhunThot hospital, Nakhon
Ratchasima, Thailand. A retrospective descriptive study was
conducted in 573 of teenage pregnant from charts reviewed from 1st
October 2010-31st March, 2012. Data were analyzed by frequency
distribution, mean and Standard Deviation.
The results shown several problems and negatives outcomes of
pregnancy in teenager such as not attended prenatal care, Low birth
weight infants, death fetus in utero and other complications. The
results of this study can be utilized in the development of prenatal,
perinatal and post natal care services, especially in DanKhunthot
Hospital contexts. Moreover, the results were present to the District
Health Care committees in order to enhance health care service
system for teenage pregnancy of DanKhunthot District in further.
Abstract: A method to predict the column size for displacement based design of reinforced concrete frame buildings with higher target inter storey drift is reported here. The column depth derived from empirical relation as a function of given beam section, target inter-story drift, building plan features and common displacement based design parameters is used. Regarding the high drift requirement, a minimum column-beam moment capacity ratio is maintained during capacity design. The method is used in designing four, eight and twelve story frame buildings with displacement based design for three percent target inter storey drift. Non linear time history analysis of the designed buildings are performed under five artificial ground motions to show that the columns are found elastic enough to avoid column sway mechanism assuring that for the design the column size can be used with or without minor changes.
Abstract: This evaluation of land supply system performance in
China shall examine the combination of government functions and
national goals in order to perform a cost-benefit analysis of system
results. From the author's point of view, it is most productive to
evaluate land supply system performance at moments of system
transformation for the following reasons. The behavior and
input-output change of beneficial results at different times can be
observed when the system or policy changes and system performance
can be evaluated through a cost-benefit analysis during the process of
system transformation. Moreover, this evaluation method can avoid
the influence of land resource endowment. Different land resource
endowment methods and different economy development periods
result in different systems. This essay studies the contents, principles
and methods of land supply system performance evaluation. Taking
Beijing as an example, this essay optimizes and classifies the land
supply index, makes a quantitative evaluation of land supply system
performance through principal component analysis (PCA), and finally
analyzes the factors that influence land supply system performance at
times of system transformation.
Abstract: A number of automated shot-change detection
methods for indexing a video sequence to facilitate browsing and
retrieval have been proposed in recent years. This paper emphasizes
on the simulation of video shot boundary detection using one of the
methods of the color histogram wherein scaling of the histogram
metrics is an added feature. The difference between the histograms of
two consecutive frames is evaluated resulting in the metrics. Further
scaling of the metrics is performed to avoid ambiguity and to enable
the choice of apt threshold for any type of videos which involves
minor error due to flashlight, camera motion, etc. Two sample videos
are used here with resolution of 352 X 240 pixels using color
histogram approach in the uncompressed media. An attempt is made
for the retrieval of color video. The simulation is performed for the
abrupt change in video which yields 90% recall and precision value.
Abstract: One of the approaches enabling people with amputated
limbs to establish some sort of interface with the real world includes
the utilization of the myoelectric signal (MES) from the remaining
muscles of those limbs. The MES can be used as a control input to a
multifunction prosthetic device. In this control scheme, known as the
myoelectric control, a pattern recognition approach is usually utilized
to discriminate between the MES signals that belong to different
classes of the forearm movements. Since the MES is recorded using
multiple channels, the feature vector size can become very large. In
order to reduce the computational cost and enhance the generalization
capability of the classifier, a dimensionality reduction method is
needed to identify an informative yet moderate size feature set. This
paper proposes a new fuzzy version of the well known Fisher-s
Linear Discriminant Analysis (LDA) feature projection technique.
Furthermore, based on the fact that certain muscles might contribute
more to the discrimination process, a novel feature weighting scheme
is also presented by employing Particle Swarm Optimization (PSO)
for estimating the weight of each feature. The new method, called
PSOFLDA, is tested on real MES datasets and compared with other
techniques to prove its superiority.
Abstract: A pressure-based implicit procedure to solve Navier-
Stokes equations on a nonorthogonal mesh with collocated finite
volume formulation is used to simulate flow around the smart and
conventional flaps of spoiler under the ground effect. Cantilever
beam with uniformly varying load with roller support at the free end
is considered for smart flaps. The boundedness criteria for this
procedure are determined from a Normalized Variable diagram
(NVD) scheme. The procedure incorporates es the k -ε eddyviscosity
turbulence model. The method is first validated against
experimental data. Then, the algorithm is applied for turbulent
aerodynamic flows around a spoiler section with smart and
conventional flaps for different attack angle, flap angle and ground
clearance where the results of two flaps are compared.
Abstract: In this paper, we present a novel, principled approach to resolve the remained problems of substitution technique of audio steganography. Using the proposed genetic algorithm, message bits are embedded into multiple, vague and higher LSB layers, resulting in increased robustness. The robustness specially would be increased against those intentional attacks which try to reveal the hidden message and also some unintentional attacks like noise addition as well.
Abstract: This paper presents a linear stability analysis of
natural convection in a horizontal layer of a viscoelastic
nanofluid. The Oldroyd B model was utilized to describe the
rheological behavior of a viscoelastic nanofluid. The model
used for the nanofluid incorporated the effects of Brownian
motion and thermophoresis. The onset criterion for stationary
and oscillatory convection was derived analytically. The effects
of the Deborah number, retardation parameters, concentration
Rayleigh number, Prandtl number, and Lewis number on the
stability of the system were investigated. Results indicated that
there was competition among the processes of thermophoresis,
Brownian diffusion, and viscoelasticity which caused
oscillatory rather than stationary convection to occur.
Oscillatory instability is possible with both bottom- and
top-heavy nanoparticle distributions. Regimes of stationary and
oscillatory convection for various parameters were derived and
are discussed in detail.
Abstract: Evaporator is an important and widely used heat
exchanger in air conditioning and refrigeration industries. Different
methods have been used by investigators to increase the heat transfer
rates in evaporators. One of the passive techniques to enhance heat
transfer coefficient is the application of microfin tubes. The
mechanism of heat transfer augmentation in microfin tubes is
dependent on the flow regime of two-phase flow. Therefore many
investigations of the flow patterns for in-tube evaporation have been
reported in literatures. The gravitational force, surface tension and
the vapor-liquid interfacial shear stress are known as three dominant
factors controlling the vapor and liquid distribution inside the tube. A
review of the existing literature reveals that the previous
investigations were concerned with the two-phase flow pattern for
flow boiling in horizontal tubes [12], [9]. Therefore, the objective of
the present investigation is to obtain information about the two-phase
flow patterns for evaporation of R-134a inside horizontal smooth and
microfin tubes. Also Investigation of heat transfer during flow
boiling of R-134a inside horizontal microfin and smooth tube have
been carried out experimentally The heat transfer coefficients for
annular flow in the smooth tube is shown to agree well with Gungor
and Winterton-s correlation [4]. All the flow patterns occurred in the
test can be divided into three dominant regimes, i.e., stratified-wavy
flow, wavy-annular flow and annular flow. Experimental data are
plotted in two kinds of flow maps, i.e., Weber number for the vapor
versus weber number for the liquid flow map and mass flux versus
vapor quality flow map. The transition from wavy-annular flow to
annular or stratified-wavy flow is identified in the flow maps.
Abstract: This research is designed for helping a WAPbased mobile phone-s user in order to analyze of logistics in the traffic area by applying and designing the accessible processes from mobile user to server databases. The research-s design comprises Mysql 4.1.8-nt database system for being the server which there are three sub-databases, traffic light – times of intersections in periods of the day, distances on the road of area-blocks where are divided from the main sample-area and speeds of sample vehicles (motorcycle, personal car and truck) in periods of the day. For interconnections between the server and user, PHP is used to calculate distances and travelling times from the beginning point to destination, meanwhile XHTML applied for receiving, sending and displaying data from PHP to user-s mobile. In this research, the main sample-area is focused at the Huakwang-Ratchada-s area, Bangkok, Thailand where usually the congested point and 6.25 km2 surrounding area which are split into 25 blocks, 0.25 km2 for each. For simulating the results, the designed server-database and all communicating models of this research have been uploaded to www.utccengineering.com/m4tg and used the mobile phone which supports WAP 2.0 XHTML/HTML multimode browser for observing values and displayed pictures. According to simulated results, user can check the route-s pictures from the requiring point to destination along with analyzed consuming times when sample vehicles travel in various periods of the day.
Abstract: This study focuses on bureau management
technologies and information systems in developing countries.
Developing countries use such systems which facilitate executive and
organizational functions through the utilization of bureau
management technologies and provide the executive staff with
necessary information.
The concepts of data and information differ from each other in
developing countries, and thus the concepts of data processing and
information processing are different. Symbols represent ideas,
objects, figures, letters and numbers. Data processing system is an
integrated system which deals with the processing of the data related
to the internal and external environment of the organization in order
to make decisions, create plans and develop strategies; it goes
without saying that this system is composed of both human beings
and machines. Information is obtained through the acquisition and
the processing of data. On the other hand, data are raw
communicative messages. Within this framework, data processing
equals to producing plausible information out of raw data.
Organizations in developing countries need to obtain information
relevant to them because rapid changes in the organizational arena
require rapid access to accurate information. The most significant
role of the directors and managers who work in the organizational
arena is to make decisions. Making a correct decision is possible only
when the directors and managers are equipped with sound ideas and
appropriate information. Therefore, acquisition, organization and
distribution of information gain significance. Today-s organizations
make use of computer-assisted “Management Information Systems"
in order to obtain and distribute information.
Decision Support System which is closely related to practice is an
information system that facilitates the director-s task of making
decisions. Decision Support System integrates human intelligence,
information technology and software in order to solve the complex
problems. With the support of the computer technology and software
systems, Decision Support System produces information relevant to
the decision to be made by the director and provides the executive
staff with supportive ideas about the decision.
Artificial Intelligence programs which transfer the studies and
experiences of the people to the computer are called expert systems.
An expert system stores expert information in a limited area and can
solve problems by deriving rational consequences.
Bureau management technologies and information systems in
developing countries create a kind of information society and
information economy which make those countries have their places
in the global socio-economic structure and which enable them to play
a reasonable and fruitful role; therefore it is of crucial importance to
make use of information and management technologies in order to
work together with innovative and enterprising individuals and it is
also significant to create “scientific policies" based on information
and technology in the fields of economy, politics, law and culture.
Abstract: Despite various methods that exist in software risk management, software projects have a high rate of failure. When complexity and size of the projects are increased, managing software development becomes more difficult. In these projects the need for more analysis and risk assessment is vital. In this paper, a classification for software risks is specified. Then relations between these risks using risk tree structure are presented. Analysis and assessment of these risks are done using probabilistic calculations. This analysis helps qualitative and quantitative assessment of risk of failure. Moreover it can help software risk management process. This classification and risk tree structure can apply to some software tools.
Abstract: The objective of this paper is to present the
development of the frame of Chulalongkorn University team in TSAE
Auto Challenge Student Formula and Student Formula SAE
Competition of Japan. Chulalongkorn University's SAE team, has
established since year 2003, joined many competitions since year 2006
and became the leading team in Thailand. Through these 5 years, space
frame was the most selected and developed year by year through six
frame designs. In this paper, the discussions on the conceptual design
of these frames are introduced, focusing on the mass and torsional
stiffness improvement. The torsional stiffness test was performed on
the real used frames and the results are compared. It can be seen that
the 2010-2011 frame is firstly designed based on the analysis and
experiment that considered the required mass and torsional stiffness.
From the torsional stiffness results, it can be concluded that the frames
were developed including the decreasing of mass and the increasing
torsional stiffness by applying many techniques.
Abstract: A new strategy for oriented immobilization of proteins was proposed. The strategy contains two steps. The first step is to search for a docking site away from the active site on the protein surface. The second step is trying to find a ligand that is able to grasp the targeted site of the protein. To avoid ligand binding to the active site of protein, the targeted docking site is selected to own opposite charges to those near the active site. To enhance the ligand-protein binding, both hydrophobic and electrostatic interactions need to be included. The targeted docking site should therefore contain hydrophobic amino acids. The ligand is then selected through the help of molecular docking simulations. The enzyme α-amylase derived from Aspergillus oryzae (TAKA) was taken as an example for oriented immobilization. The active site of TAKA is surrounded by negatively charged amino acids. All the possible hydrophobic sites on the surface of TAKA were evaluated by the free energy estimation through benzene docking. A hydrophobic site on the opposite side of TAKA-s active site was found to be positive in net charges. A possible ligand, 3,3-,4,4- – Biphenyltetra- carboxylic acid (BPTA), was found to catch TAKA by the designated docking site. Then, the BPTA molecules were grafted onto silica gels and measured the affinity of TAKA adsorption and the specific activity of thereby immobilized enzymes. It was found that TAKA had a dissociation constant as low as 7.0×10-6 M toward the ligand BPTA on silica gel. The increase in ionic strength has little effect on the adsorption of TAKA, which indicated the existence of hydrophobic interaction between ligands and proteins. The specific activity of the immobilized TAKA was compared with the randomly adsorbed TAKA on primary amine containing silica gel. It was found that the orderly immobilized TAKA owns a specific activity twice as high as the one randomly adsorbed by ionic interaction.
Abstract: Mobile Ad hoc Network (MANET) is a wireless ad hoc self-configuring network of mobile routers (and associated hosts) connected by wireless links, the union of which forms an arbitrary topology, cause of the random mobility of the nodes. In this paper, an attempt has been made to compare these three protocols DSDV, AODV and DSR on the performance basis under different traffic protocols namely CBR and TCP in a large network. The simulation tool is NS2, the scenarios are made to see the effect of pause times. The results presented in this paper clearly indicate that the different protocols behave differently under different pause times. Also, the results show the main characteristics of different traffic protocols operating on MANETs and thus select the best protocol on each scenario.
Abstract: This paper maps the structure of the social network of
the 2011 class ofsixty graduate students of the Masters of Science
(Knowledge Management) programme at the Nanyang Technological
University, based on their friending relationships on Facebook. To
ensure anonymity, actual names were not used. Instead, they were
replaced with codes constructed from their gender, nationality, mode
of study, year of enrollment and a unique number. The relationships
between friends within the class, and among the seniors and alumni
of the programme wereplotted. UCINet and Pajek were used to plot
the sociogram, to compute the density, inclusivity, and degree,
global, betweenness, and Bonacich centralities, to partition the
students into two groups, namely, active and peripheral, and to
identify the cut-points. Homophily was investigated, and it was
observed for nationality and study mode. The groups students formed
on Facebook were also studied, and of fifteen groups, eight were
classified as dead, which we defined as those that have been inactive
for over two months.
Abstract: This paper describes technological possibilities to
enhance methane productionin the anaerobic stabilization of wastewater treatment plant excess sludge. This objective can be achieved by the addition of waste residues: crude glycerol from biodiesel production and residues from fishery. The addition
ofglycerol in an amount by weight of 2 – 5% causes enhancement of methane production of about 250 – 400%. At the same time the
percentage increase of total solids concentration in the outgoing sludge is ten or more times less. The containment of methane in
biogas is higher in case of admixed substrate.
Abstract: We consider a typical problem in the assembly of
printed circuit boards (PCBs) in a two-machine flow shop system to
simultaneously minimize the weighted sum of weighted tardiness and
weighted flow time. The investigated problem is a group scheduling
problem in which PCBs are assembled in groups and the interest is to
find the best sequence of groups as well as the boards within each
group to minimize the objective function value. The type of setup
operation between any two board groups is characterized as carryover
sequence-dependent setup time, which exactly matches with the real
application of this problem. As a technical constraint, all of the
boards must be kitted before the assembly operation starts (kitting
operation) and by kitting staff. The main idea developed in this paper
is to completely eliminate the role of kitting staff by assigning the
task of kitting to the machine operator during the time he is idle
which is referred to as integration of internal (machine) and external
(kitting) setup times. Performing the kitting operation, which is a
preparation process of the next set of boards while the other boards
are currently being assembled, results in the boards to continuously
enter the system or have dynamic arrival times. Consequently, a
dynamic PCB assembly system is introduced for the first time in the
assembly of PCBs, which also has characteristics similar to that of
just-in-time manufacturing. The problem investigated is
computationally very complex, meaning that finding the optimal
solutions especially when the problem size gets larger is impossible.
Thus, a heuristic based on Genetic Algorithm (GA) is employed. An
example problem on the application of the GA developed is
demonstrated and also numerical results of applying the GA on
solving several instances are provided.
Abstract: The use of the mechanical simulation (in particular the finite element analysis) requires the management of assumptions in order to analyse a real complex system. In finite element analysis (FEA), two modeling steps require assumptions to be able to carry out the computations and to obtain some results: the building of the physical model and the building of the simulation model. The simplification assumptions made on the analysed system in these two steps can generate two kinds of errors: the physical modeling errors (mathematical model, domain simplifications, materials properties, boundary conditions and loads) and the mesh discretization errors. This paper proposes a mesh adaptive method based on the use of an h-adaptive scheme in combination with an error estimator in order to choose the mesh of the simulation model. This method allows us to choose the mesh of the simulation model in order to control the cost and the quality of the finite element analysis.