Abstract: In this paper is shown that the probability-statistic methods application, especially at the early stage of the aviation gas turbine engine (GTE) technical condition diagnosing, when the flight information has property of the fuzzy, limitation and uncertainty is unfounded. Hence is considered the efficiency of application of new technology Soft Computing at these diagnosing stages with the using of the Fuzzy Logic and Neural Networks methods. Training with high accuracy of fuzzy multiple linear and non-linear models (fuzzy regression equations) which received on the statistical fuzzy data basis is made. Thus for GTE technical condition more adequate model making are analysed dynamics of skewness and kurtosis coefficients' changes. Researches of skewness and kurtosis coefficients values- changes show that, distributions of GTE work parameters have fuzzy character. Hence consideration of fuzzy skewness and kurtosis coefficients is expedient. Investigation of the basic characteristics changes- dynamics of GTE work parameters allows to draw conclusion on necessity of the Fuzzy Statistical Analysis at preliminary identification of the engines' technical condition. Researches of correlation coefficients values- changes shows also on their fuzzy character. Therefore for models choice the application of the Fuzzy Correlation Analysis results is offered. For checking of models adequacy is considered the Fuzzy Multiple Correlation Coefficient of Fuzzy Multiple Regression. At the information sufficiency is offered to use recurrent algorithm of aviation GTE technical condition identification (Hard Computing technology is used) on measurements of input and output parameters of the multiple linear and non-linear generalised models at presence of noise measured (the new recursive Least Squares Method (LSM)). The developed GTE condition monitoring system provides stage-bystage estimation of engine technical conditions. As application of the given technique the estimation of the new operating aviation engine temperature condition was made.
Abstract: This paper presents a critical study about the
application of Neural Networks to ion-exchange process. Ionexchange
is a complex non-linear process involving many factors
influencing the ions uptake mechanisms from the pregnant solution.
The following step includes the elution. Published data presents
empirical isotherm equations with definite shortcomings resulting in
unreliable predictions. Although Neural Network simulation
technique encounters a number of disadvantages including its “black
box", and a limited ability to explicitly identify possible causal
relationships, it has the advantage to implicitly handle complex
nonlinear relationships between dependent and independent
variables. In the present paper, the Neural Network model based on
the back-propagation algorithm Levenberg-Marquardt was developed
using a three layer approach with a tangent sigmoid transfer function
(tansig) at hidden layer with 11 neurons and linear transfer function
(purelin) at out layer. The above mentioned approach has been used
to test the effectiveness in simulating ion exchange processes. The
modeling results showed that there is an excellent agreement between
the experimental data and the predicted values of copper ions
removed from aqueous solutions.
Abstract: This article is an extension and a practical application
approach of Wheeler-s NEBIC theory (Net Enabled Business
Innovation Cycle). NEBIC theory is a new approach in IS research
and can be used for dynamic environment related to new technology.
Firms can follow the market changes rapidly with support of the IT
resources. Flexible firms adapt their market strategies, and respond
more quickly to customers changing behaviors. When every leading
firm in an industry has access to the same IT resources, the way that
these IT resources are managed will determine the competitive
advantages or disadvantages of firm. From Dynamic Capabilities
Perspective and from newly introduced NEBIC theory by Wheeler,
we know that only IT resources cannot deliver customer value but
good configuration of those resources can guarantee customer value
by choosing the right emerging technology, grasping the economic
opportunities through business innovation and growth. We found
evidences in literature that SOA (Service Oriented Architecture) is a
promising emerging technology which can deliver the desired
economic opportunity through modularity, flexibility and loosecoupling.
SOA can also help firms to connect in network which can
open a new window of opportunity to collaborate in innovation and
right kind of outsourcing
Abstract: The article deals with dividends and their distribution from investors from a theoretical point of view. Some studies try to analyzed the reaction of the market on the dividend announcement and found out the change of dividend policy is associated with abnormal returns around the dividend announcement date. Another researches directly questioned the investors about their dividend preference and beliefs. Investors want the dividend from many reasons (e.g. some of them explain the dividend preference by the existence of transaction cost; investors prefer the dividend today, because there is less risky; the managers have private information about the firm). The most controversial theory of dividend policy was developed by Modigliani and Miller (1961) who demonstrated that in the perfect and complete capital markets the dividend policy is irrelevant and the value of the company is independent of its payout policy. Nevertheless, in the real world the capital markets are imperfect, because of asymmetric information, transaction costs, incomplete contracting possibilities and taxes.
Abstract: E-government projects have potential for greater efficiency and effectiveness of government operations. For this reason, many developing countries governments have invested heavily in this agenda and an increasing number of e-government projects are being implemented. However, there is a lack of clear case material, which describes the potentialities and consequence experienced by organizations trying to manage with this change. The Ministry of State for Administrative Development (MSAD) is the organization responsible for the e-Government program in Egypt since early 2004. This paper presents a case study of the process of admission to public universities and institutions in Egypt which is led by MSAD. Underlining the key benefits resulting from the initiative, explaining the strategies and the development steps used to implement it, and highlighting the main obstacles encountered and how they were overcome will help repeat the experience in other useful e-government projects.
Abstract: Cell formation is the first step in the design of cellular
manufacturing systems. In this study, a general purpose
computational scheme employing a hybrid tabu search algorithm as
the core is proposed to solve the cell formation problem and its
variants. In the proposed scheme, great flexibilities are left to the
users. The core solution searching algorithm embedded in the scheme
can be easily changed to any other meta-heuristic algorithms, such as
the simulated annealing, genetic algorithm, etc., based on the
characteristics of the problems to be solved or the preferences the
users might have. In addition, several counters are designed to control
the timing of conducting intensified solution searching and diversified
solution searching strategies interactively.
Abstract: As the global climate changes, the threat from
landslides and debris flows increases. Learning how a watershed
initiates landslides under abnormal rainfall conditions and predicting
landslide magnitude and frequency distribution is thus important.
Landslides show a power-law distribution in the frequency-area
distribution. The distribution curve shows an exponent gradient 1.0 in
the Sandpile model test. Will the landslide frequency-area statistics
show a distribution similar to the Sandpile model under extreme
rainfall conditions? The purpose of the study is to identify the extreme
rainfall-induced landslide frequency-area distribution in the Laonong
River Basin in southern Taiwan. Results of the analysis show that a
lower gradient of landslide frequency-area distribution could be
attributed to the transportation and deposition of debris flow areas that
are included in the landslide area.
Abstract: Current trends in manufacturing are characterized by
production broadening, innovation cycle shortening, and the products
having a new shape, material and functions. The production strategy
focused on time needed change from the traditional functional
production structure to flexible manufacturing cells and lines.
Production by automated manufacturing system (AMS) is one of the
most important manufacturing philosophies in the last years. The
main goals of the project we are involved in lies on building a
laboratory in which will be located a flexible manufacturing system
consisting of at least two production machines with NC control
(milling machines, lathe). These machines will be linked to a
transport system and they will be served by industrial robots. Within
this flexible manufacturing system a station for the quality control
consisting of a camera system and rack warehouse will be also
located. The design, analysis and improvement of this manufacturing
system, specially with a special focus on the communication among
devices constitute the main aims of this paper. The key determining
factors for the manufacturing system design are: the product, the
production volume, the used machines, the disposable manpower, the
disposable infrastructure and the legislative frame for the specific
cases.
Abstract: This paper reviews recent studies and particularly the
effects of Climate Change in the North Tropical Atlantic by studying
atmospheric conditions that prevailed in 2005 ; Coral Bleaching
HotSpot and Hurricane Katrina. In the aim to better understand and
estimate the impact of the physical phenomenon, i.e. Thermal
Oceanic HotSpot (TOHS), isotopic studies of δ18O and δ13C on
marine animals from Guadeloupe (French Caribbean Island) were
carried out. Recorded measures show Sea Surface Temperature (SST)
up to 35°C in August which is much higher than data recorded by
NOAA satellites 32°C. After having reviewed the process that led to
the creation of Hurricane Katrina which hit New Orleans in August
29, 2005, it will be shown that the climatic conditions in the
Caribbean from August to October 2005 have influenced Katrina
evolution. This TOHS is a combined effect of various phenomenon
which represent an additional factor to estimate future climate
changes.
Abstract: The measurement of anesthetic depth is necessary in
anesthesiology. NN10 is very simple method among the RR intervals
analysis methods. NN10 parameter means the numbers of above the 10
ms intervals of the normal to normal RR intervals.
Bispectrum analysis is defined as 2D FFT. EEG signal reflected the
non-linear peristalsis phenomena according to the change brain
function. After analyzing the bispectrum of the 2 dimension, the most
significant power spectrum density peaks appeared abundantly at the
specific area in awakening and anesthesia state. These points are
utilized to create the new index since many peaks appeared at the
specific area in the frequency coordinate. The measured range of an
index was 0-100. An index is 20-50 at an anesthesia, while the index is
90-60 at the awake.
In this paper, the relation between NN10 parameter using ECG and
bisepctrum index using EEG is observed to estimate the depth of
anesthesia during anesthesia and then we estimated the utility of the
anesthetic.
Abstract: The complex structure of lignocellulose leads to great
difficulties in converting it to fermentable sugars for the ethanol
production. The major hydrolysis impediments are the crystallinity of
cellulose and the lignin content. To improve the efficiency of
enzymatic hydrolysis, microbial pretreatment of corncob was
investigated using two bacterial strains of Bacillus subtilis A 002 and
Cellulomonas sp. TISTR 784 (expected to break open the crystalline
part of cellulose) and lignin-degrading fungus, Phanerochaete
sordida SK7 (expected to remove lignin from lignocellulose). The
microbial pretreatment was carried out with each strain under its
optimum conditions. The pretreated corncob samples were further
hydrolyzed to produce reducing glucose with low amounts of
commercial cellulase (25 U·g-1 corncob) from Aspergillus niger. The
corncob samples were determined for composition change by X-ray
diffraction (XRD), Fourier transform infrared spectroscopy (FTIR),
and scanning electron microscope (SEM). According to the results,
the microbial pretreatment with fungus, P. sordida SK7 was the most
effective for enhancing enzymatic hydrolysis, approximately, 40%
improvement.
Abstract: Researchers investigate arious strategies to develop composite beams and maximize the structural advantages. This study
attempted to conduct experiments and analysis of changes in the
neutral axis of positive moments of a Green Beam. Strain
compatibility analysis was used, and its efficiency was demonstrated
by comparing experimental and analytical values. In the comparison of
neutral axis, the difference between experimental and analytical values
was found to range from 8.8~26.2%. It was determined that strain
compatibility analysis can be useful for predicting the behaviors of
composite beams, with the ability to predict the behavior of not only
the elastic location of the composite member, but also of the plastic
location
Abstract: The hybrid membranes containing inorganic materials in polymer matrix are identified as a remarkable family of proton conducting hybrid electrolytes. In this work, the proton conducting inorganic/organic hybrid membranes for proton exchange membrane fuel cells (PEMFCs) were prepared using polyvinyl alcohol (PVA), tetraethoxyorthosilane (TEOS) and heteropolyacid (HPA). The synthesized hybrid membranes were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), Scanning electron microscopy (SEM) and Thermogravimetry analysis (TGA). The effects of heteropolyacid incorporation on membrane properties, including morphology and thermal stability were extensively investigated.
Abstract: The presented paper shows the possibility of using
holographic interferometry for measurement of temperature field in
moving fluids. There are a few methods for identification of velocity
fields in fluids, such us LDA, PIV, hot wire anemometry. It is very
difficult to measure the temperature field in moving fluids. One of the
often used methods is Constant Current Anemometry (CCA), which
is a point temperature measurement method. Data are possibly
acquired at frequencies up to 1000Hz. This frequency should be
limiting factor for using of CCA in fluid when fast change of
temperature occurs. This shortcoming of CCA measurements should
be overcome by using of optical methods such as holographic
interferometry. It is necessary to employ a special holographic setup
with double sensitivity instead of the commonly used Mach-Zehnder
type of holographic interferometer in order to attain the parameters
sufficient for the studied case. This setup is not light efficient like the
Mach-Zehnder type but has double sensitivity. The special technique
of acquiring and phase averaging of results from holographic
interferometry is also presented. The results from the holographic
interferometry experiments will be compared with the temperature
field achieved by methods CCA method.
Abstract: Existing methods in which the animation data of all frames are stored and reproduced as with vertex animation cannot be used in mobile device environments because these methods use large amounts of the memory. So 3D animation data reduction methods aimed at solving this problem have been extensively studied thus far and we propose a new method as follows. First, we find and remove frames in which motion changes are small out of all animation frames and store only the animation data of remaining frames (involving large motion changes). When playing the animation, the removed frame areas are reconstructed using the interpolation of the remaining frames. Our key contribution is to calculate the accelerations of the joints of individual frames and the standard deviations of the accelerations using the information of joint locations in the relevant 3D model in order to find and delete frames in which motion changes are small. Our methods can reduce data sizes by approximately 50% or more while providing quality which is not much lower compared to original animations. Therefore, our method is expected to be usefully used in mobile device environments or other environments in which memory sizes are limited.
Abstract: Does the spatial perspective provide a common thread for rural sociology? Have rural sociologists succeeded in bringing order to their data using spatial analysis models and techniques? A trial answer to such questions, as touchstones of theoretical and applied sociological studies in rural areas, is the point at issue in the present paper. Spatial analyses have changed the way rural sociologists approach scientific problems. Rural sociology is spatial by nature because much, if not most, of its research topics has a spatial “awareness." However, such spatial awareness is not quite the same as spatial analysis because it is not typically associated with underlying theories and hypotheses about spatial patterns that are designed to be tested for their specific spatial content. This paper presents pressing issues for future research to reintroduce mainstream rural sociology to the concept of space.
Abstract: Studies on the distribution of traffic demands have
been proceeding by providing traffic information for reducing
greenhouse gases and reinforcing the road's competitiveness in the
transport section, however, since it is preferentially required the
extensive studies on the driver's behavior changing routes and its
influence factors, this study has been developed a discriminant model
for changing routes considering driving conditions including traffic
conditions of roads and driver's preferences for information media. It
is divided into three groups depending on driving conditions in group
classification with the CART analysis, which is statistically
meaningful. And the extent that driving conditions and preferred
media affect a route change is examined through a discriminant
analysis, and it is developed a discriminant model equation to predict a
route change. As a result of building the discriminant model equation,
it is shown that driving conditions affect a route change much more,
the entire discriminant hit ratio is derived as 64.2%, and this
discriminant equation shows high discriminant ability more than a
certain degree.
Abstract: The quick training algorithms and accurate solution
procedure for incremental learning aim at improving the efficiency of
training of SVR, whereas there are some disadvantages for them, i.e.
the nonconvergence of the formers for changeable training set and
the inefficiency of the latter for a massive dataset. In order to handle
the problems, a new training algorithm for a changeable training
set, named Approximation Incremental Training Algorithm (AITA),
was proposed. This paper explored the reason of nonconvergence
theoretically and discussed the realization of AITA, and finally
demonstrated the benefits of AITA both on precision and efficiency.
Abstract: The friction between two metal surfaces results in a
high frequency noise (squealing) which also occurs during the
braking of wagons with rail brakes in the process of shunting at a
marshalling yard with a hump. At that point the noise level may
exceed 130dB, which is extremely unpleasant for workers and
inhabitants. In our research we developed a new composite material
which does not change braking properties, is capable of taking
extremely high pressure loads, reduces noise and is environmentally
friendly. The noise reduction results had been very good and had
shown a decrease of the high frequency noise almost completely (by
99%) at its source. With our technology we had also reduced general
noise by more than 30dBA.
Abstract: This paper suggests a fast and stable Target Tracking
system in collaborative control of UAV and UGV. Wi-Fi communication range is limited in collaborative control of UAV and UGV. Thus, to secure a stable communications, UAV and UGV have
to be kept within a certain distance from each other. But existing
method which uses UAV Vertical Camera to follow the motion of
UGV is likely to lose a target with a sudden movement change.
Eventually, UGV has disadvantages that it could only move at a low
speed and not make any sudden change of direction in order to keep
track of the target. Therefore, we suggest utilizing AR Drone UAV front camera to track fast-moving and Omnidirectional Mecanum
Wheel UGV.