Abstract: Power system stabilizers (PSS) are now routinely used in the industry to damp out power system oscillations. In this paper, real-coded genetic algorithm (RCGA) optimization technique is applied to design robust power system stabilizer for both singlemachine infinite-bus (SMIB) and multi-machine power system. The design problem of the proposed controller is formulated as an optimization problem and RCGA is employed to search for optimal controller parameters. By minimizing the time-domain based objective function, in which the deviation in the oscillatory rotor speed of the generator is involved; stability performance of the system is improved. The non-linear simulation results are presented under wide range of operating conditions; disturbances at different locations as well as for various fault clearing sequences to show the effectiveness and robustness of the proposed controller and their ability to provide efficient damping of low frequency oscillations.
Abstract: The elution process for the removal of Co and Cu from clinoptilolite as an ion-exchanger was investigated using three parameters: bed volume, pH and contact time. The present paper study has shown quantitatively that acid concentration has a significant effect on the elution process. The favorable eluant concentration was found to be 2 M HCl and 2 M H2SO4, respectively. The multi-component equilibrium relationship in the process can be very complex, and perhaps ill-defined. In such circumstances, it is preferable to use a non-parametric technique such as Neural Network to represent such an equilibrium relationship.
Abstract: In this paper, we propose a fast and efficient method for drawing very large-scale graph data. The conventional force-directed method proposed by Fruchterman and Rheingold (FR method) is well-known. It defines repulsive forces between every pair of nodes and attractive forces between connected nodes on a edge and calculates corresponding potential energy. An optimal layout is obtained by iteratively updating node positions to minimize the potential energy. Here, the positions of the nodes are updated every global timestep at the same time. In the proposed method, each node has its own individual time and time step, and nodes are updated at different frequencies depending on the local situation. The proposed method is inspired by the hierarchical individual time step method used for the high accuracy calculations for dense particle fields such as star clusters in astrophysical dynamics. Experiments show that the proposed method outperforms the original FR method in both speed and accuracy. We implement the proposed method on the MDGRAPE-3 PCI-X special purpose parallel computer and realize a speed enhancement of several hundred times.
Abstract: This paper addresses a novel technique for placement of distributed generation (DG) in electric power systems. A GA based approach for sizing and placement of DG keeping in view of system power loss minimization in different loading conditions is explained. Minimal system power loss is obtained under voltage and line loading constraints. Proposed strategy is applied to power distribution systems and its effectiveness is verified through simulation results on 16, 37-bus and 75-bus test systems.
Abstract: The evolution of logic circuits, which falls under the heading of evolvable hardware, is carried out by evolutionary algorithms. These algorithms are able to automatically configure reconfigurable devices. One of main difficulties in developing evolvable hardware with the ability to design functional electrical circuits is to choose the most favourable EA features such as fitness function, chromosome representations, population size, genetic operators and individual selection. Until now several researchers from the evolvable hardware community have used and tuned these parameters and various rules on how to select the value of a particular parameter have been proposed. However, to date, no one has presented a study regarding the size of the chromosome representation (circuit layout) to be used as a platform for the evolution in order to increase the evolvability, reduce the number of generations and optimize the digital logic circuits through reducing the number of logic gates. In this paper this topic has been thoroughly investigated and the optimal parameters for these EA features have been proposed. The evolution of logic circuits has been carried out by an extrinsic evolvable hardware system which uses (1+λ) evolution strategy as the core of the evolution.
Abstract: The future of business intelligence (BI) is to integrate
intelligence into operational systems that works in real-time
analyzing small chunks of data based on requirements on continuous
basis. This is moving away from traditional approach of doing
analysis on ad-hoc basis or sporadically in passive and off-line mode
analyzing huge amount data. Various AI techniques such as expert
systems, case-based reasoning, neural-networks play important role
in building business intelligent systems. Since BI involves various
tasks and models various types of problems, hybrid intelligent
techniques can be better choice. Intelligent systems accessible
through web services make it easier to integrate them into existing
operational systems to add intelligence in every business processes.
These can be built to be invoked in modular and distributed way to
work in real time. Functionality of such systems can be extended to
get external inputs compatible with formats like RSS. In this paper,
we describe a framework that use effective combinations of these
techniques, accessible through web services and work in real-time.
We have successfully developed various prototype systems and done
few commercial deployments in the area of personalization and
recommendation on mobile and websites.
Abstract: Optimal supplementary damping controller design for Thyristor Controlled Series Compensator (TCSC) is presented in this paper. For the proposed controller design, a multi-objective fitness function consisting of both damping factors and real part of system electromachanical eigenvalue is used and Real- Coded Genetic Algorithm (RCGA) is employed for the optimal supplementary controller parameters. The performance of the designed supplementary TCSC-based damping controller is tested on a weakly connected power system with different disturbances and loading conditions with parameter variations. Simulation results are presented and compared with a conventional power system stabilizer and also with the TCSC-based supplementary controller when the controller parameters are not optimized to show the effectiveness and robustness of the proposed approach over a wide range of loading conditions and disturbances.
Abstract: As the number of networked computers grows,
intrusion detection is an essential component in keeping networks
secure. Various approaches for intrusion detection are currently
being in use with each one has its own merits and demerits. This
paper presents our work to test and improve the performance of a
new class of decision tree c-fuzzy decision tree to detect intrusion.
The work also includes identifying best candidate feature sub set to
build the efficient c-fuzzy decision tree based Intrusion Detection
System (IDS). We investigated the usefulness of c-fuzzy decision
tree for developing IDS with a data partition based on horizontal
fragmentation. Empirical results indicate the usefulness of our
approach in developing the efficient IDS.
Abstract: Since Network-on-Chip (NoC) uses network
interfaces (NIs) to improve the design productivity, by now, there
have been a few papers addressing the design and implementation of a
NI module. However, none of them considered the difference of
address encoding methods between NoC and the traditional
bus-shared architecture. On the basis of this difference, in the paper,
we introduce a transmit mechanism to solve such a problem for global
asynchronous locally synchronous (GALS) NoC. Furthermore, we
give the concrete implementation of the NI module in this transmit
mechanism. Finally, we evaluate its performance and area overhead
by a VHDL-based cycle-accurate RTL model and simulation results
confirm the validity of this address-oriented transmit mechanism.
Abstract: The story of Alibaba demonstrates a credible example of how a small start-up company can eventually make it big in the global economy through the Internet. This case study does not attempt to present Alibaba as a perfect formula; rather, it discusses the strategies carried out by the firm and, in the process, culls out the important lessons that can guide start-ups and aspiring entrepreneurs in the complex world of online trading. Similar to the interesting and exotic Asian cuisine that continuously evolves from the diversity of Asia-s people and their unique culture and personality, Alibaba has successfully transformed itself over the years, adapting to the changes in and demands of online businessto- business (B2B) commerce.
Abstract: According to the majority and to stereotypes in a simple everyman religious processes in the world in general, and Kazakhstan in particular, have only negative trends. The main reason for the author's opinion is seen in the fact that the media in the pursuit of ratings and sensation, more inclined to highlight the negative aspects of events in the country and the world of processes forgetting or casually mentioning the positive initiatives and achievements. That is why the article is mainly revealed positive trends in mind that the problems of fanaticism, terrorism and the confrontation of society on various issues, a lot has been written and detailed. This article describes the stages in the development of relations between religion and state, as well as institutionalization, networking and assistance in the correct orientation of religious activities in the country.
Abstract: In the context of spectrum surveillance, a method to
recover the code of spread spectrum signal is presented, whereas the
receiver has no knowledge of the transmitter-s spreading sequence.
The approach is based on a genetic algorithm (GA), which is forced to
model the received signal. Genetic algorithms (GAs) are well known
for their robustness in solving complex optimization problems.
Experimental results show that the method provides a good
estimation, even when the signal power is below the noise power.
Abstract: In this work, we study the problem of determining
the minimum scheduling length that can satisfy end-to-end (ETE)
traffic demand in scheduling-based multihop WSNs with cooperative
multiple-input multiple-output (MIMO) transmission scheme. Specifically,
we present a cross-layer formulation for the joint routing,
scheduling and stream control problem by incorporating various
power and rate adaptation schemes, and taking into account an
antenna beam pattern model and the signal-to-interference-and-noise
(SINR) constraint at the receiver. In the context, we also propose
column generation (CG) solutions to get rid of the complexity
requiring the enumeration of all possible sets of scheduling links.
Abstract: An artificial neural network (ANN) approach was used to model the energy consumption of wheat production. This study was conducted over 35,300 hectares of irrigated and dry land wheat fields in Canterbury in the 2007-2008 harvest year.1 In this study several direct and indirect factors have been used to create an artificial neural networks model to predict energy use in wheat production. The final model can predict energy consumption by using farm condition (size of wheat area and number paddocks), farmers- social properties (education), and energy inputs (N and P use, fungicide consumption, seed consumption, and irrigation frequency), it can also predict energy use in Canterbury wheat farms with error margin of ±7% (± 1600 MJ/ha).
Abstract: The waves of eGovernment are rising very fast
through almost all public administration, or at least most of the
public administrations around the world, and not only the public
administration, but also the entire government and all of their
organization as a whole. The government uses information
technology, and above all the internet or web network, to facilitate
the exchange of services between government agencies and citizens,
businesses, employees and other non-governmental agencies. With
efficient and transparent information exchange, the information
becomes accessible to the society (citizens, business, employees etc.),
and as a result of these processes the society itself becomes the
information society or knowledge society. This paper discusses the
knowledge management for eGovernment development in
significance and role. Also, the paper reviews the role of virtual
communities as a knowledge management mechanism to support
eGovernment in Montenegro. It explores the need for knowledge
management in eGovernment, identifies knowledge management
technologies, and highlights the challenges for developing countries,
such as Montenegro in the implementation of eGovernment. The
paper suggests that knowledge management is needed to facilitate
information exchange and transaction processing with citizens, as
well as to enable creation of knowledge society.
Abstract: Automatic reusability appraisal is helpful in
evaluating the quality of developed or developing reusable software
components and in identification of reusable components from
existing legacy systems; that can save cost of developing the
software from scratch. But the issue of how to identify reusable
components from existing systems has remained relatively
unexplored. In this research work, structural attributes of software
components are explored using software metrics and quality of the
software is inferred by different Neural Network based approaches,
taking the metric values as input. The calculated reusability value
enables to identify a good quality code automatically. It is found that
the reusability value determined is close to the manual analysis used
to be performed by the programmers or repository managers. So, the
developed system can be used to enhance the productivity and
quality of software development.
Abstract: .Hardware realization of a Neural Network (NN), to a large extent depends on the efficient implementation of a single neuron. FPGA-based reconfigurable computing architectures are suitable for hardware implementation of neural networks. FPGA realization of ANNs with a large number of neurons is still a challenging task. This paper discusses the issues involved in implementation of a multi-input neuron with linear/nonlinear excitation functions using FPGA. Implementation method with resource/speed tradeoff is proposed to handle signed decimal numbers. The VHDL coding developed is tested using Xilinx XC V50hq240 Chip. To improve the speed of operation a lookup table method is used. The problems involved in using a lookup table (LUT) for a nonlinear function is discussed. The percentage saving in resource and the improvement in speed with an LUT for a neuron is reported. An attempt is also made to derive a generalized formula for a multi-input neuron that facilitates to estimate approximately the total resource requirement and speed achievable for a given multilayer neural network. This facilitates the designer to choose the FPGA capacity for a given application. Using the proposed method of implementation a neural network based application, namely, a Space vector modulator for a vector-controlled drive is presented
Abstract: Wireless mesh networks based on IEEE 802.11
technology are a scalable and efficient solution for next generation
wireless networking to provide wide-area wideband internet access to
a significant number of users. The deployment of these wireless mesh
networks may be within different authorities and without any
planning, they are potentially overlapped partially or completely in
the same service area. The aim of the proposed model is design a new
model to Enhancement Throughput of Unplanned Wireless Mesh
Networks Deployment Using Partitioning Hierarchical Cluster
(PHC), the unplanned deployment of WMNs are determinates there
performance. We use throughput optimization approach to model the
unplanned WMNs deployment problem based on partitioning
hierarchical cluster (PHC) based architecture, in this paper the
researcher used bridge node by allowing interworking traffic between
these WMNs as solution for performance degradation.
Abstract: With the exponential rise in the number of multimedia
applications available, the best-effort service provided by the Internet
today is insufficient. Researchers have been working on new
architectures like the Next Generation Network (NGN) which, by
definition, will ensure Quality of Service (QoS) in an all-IP based
network [1]. For this approach to become a reality, reservation of
bandwidth is required per application per user. WiMAX (Worldwide
Interoperability for Microwave Access) is a wireless communication
technology which has predefined levels of QoS which can be
provided to the user [4]. IPv6 has been created as the successor for
IPv4 and resolves issues like the availability of IP addresses and
QoS. This paper provides a design to use the power of WiMAX as an
NSP (Network Service Provider) for NGN using IPv6. The use of the
Traffic Class (TC) field and the Flow Label (FL) field of IPv6 has
been explained for making QoS requests and grants [6], [7]. Using
these fields, the processing time is reduced and routing is simplified.
Also, we define the functioning of the ASN gateway and the NGN
gateway (NGNG) which are edge node interfaces in the NGNWiMAX
design. These gateways ensure QoS management through
built in functions and by certain physical resources and networking
capabilities.
Abstract: Recently, web services to access from many type devices
are often used. We have developed the shortest path planning
system called "Bus-Net" in Tottori prefecture as a web application
to sustain the public transport. And it used the same user interface
for both devices. To support both devices, the interface cannot use
JavaScript and so on.
Thus, we developed the method that use individual user interface
for each device type to improve its convenience. To be concrete,
we defined formats of condition input to the path planning system
and result output from it and separate the system into the request
processing part and user interface parts that depend on device types.
By this method, we have also developed special device for Bus-Net
named "Intelligent-Bus-Stop".