Abstract: A shaft-type activated sludge reactor has been
developed in order to study the feasibility of high-rate wastewater
treatment. The reactor having volume of about 14.5 L was operated
with the acclimated mixed activated sludge under batch and
continuous mode using a synthetic wastewater as feed. The batch
study was performed with varying chemical oxygen demand (COD)
concentrations of 1000–3500 mg·L-1 for a batch period up to 9 h. The
kinetic coefficients: Ks, k, Y and kd were obtained as 2040.2 mg·L-1
and 0.105 h-1, 0.878 and 0.0025 h-1 respectively from Monod-s
approach. The continuous study showed a stable and steady state
operation for a hydraulic retention time (HRT) of 8 h and influent
COD of about 1000 mg·L-1. A maximum COD removal efficiency of
about 80% was attained at a COD loading rate and food-tomicroorganism
(F/M) ratio (COD basis) of 3.42 kg·m-3d-1 and 1.0
kg·kg-1d-1 respectively under a HRT of 8 h. The reactor was also
found to handle COD loading rate and F/M ratio of 10.8 kg·m-3d-1
and 2.20 kg·kg-1d-1 respectively showing a COD removal efficiency
of about 46%.
Abstract: This work addresses the problem of optimizing
completely batch water-using network with multiple contaminants
where the flow change caused by mass transfer is taken into
consideration for the first time. A mathematical technique for
optimizing water-using network is proposed based on
source-tank-sink superstructure. The task is to obtain the freshwater
usage, recycle assignments among water-using units, wastewater
discharge and a steady water-using network configuration by
following steps. Firstly, operating sequences of water-using units are
determined by time constraints. Next, superstructure is simplified by
eliminating the reuse and recycle from water-using units with
maximum concentration of key contaminants. Then, the non-linear
programming model is solved by GAMS (General Algebra Model
System) for minimum freshwater usage, maximum water recycle and
minimum wastewater discharge. Finally, numbers of operating periods
are calculated to acquire the steady network configuration. A case
study is solved to illustrate the applicability of the proposed approach.
Abstract: Whilst there is growing evidence that activity across
the lifespan is beneficial for improved health, there are also many
changes involved with the aging process and subsequently the
potential for reduced indices of health. The nexus between all forms
of health, physical activity and aging is complex and has raised much
interest in recent times due to the realization that a multifaceted
approached is necessary in order to counteract a growing obesity
epidemic. By investigating age based trends within a population
adherring to competitive sport at older ages, further insight might be
gleaned to assist in understanding one of many factors influencing
this relationship. This study evaluated those sport psychological
constructs of health, physical fitness, mental health states, and social
dimension factors in sport that were associated with factors to
participate in sport and physical activity based on responses from the
2009 World Masters Games in Sydney. The sample consisted of
7846 athletes who competed at the games and who completed a 56
item sports participation survey using a 7-point Likert response (1 -
not important to 7 - very important). Questions focuses on factors
thought to promote participation, such as weight control, living
longer, improving mental health (self-esteem, mood states),
improving physical health and factors related to the athlete-s
competitive perspective. The most significant factors related to
participation with this cohort of masters athletes were the socializing
environment of sport, getting physically fit and improving
competitive personal best performances. Strategies to increase
participation in masters sport should focus on these factors as other
factors such as weight loss, improving mental health and living
longer were not identified as important determinates of sports
participation at the World Masters level.
Abstract: Tip vortex cavitation is one of well known patterns of
cavitation phenomenon which occurs in axial pumps. This pattern of
cavitation occurs due to pressure difference between the pressure and
suction sides of blades of an axial pump. Since the pressure in the
pressure side of the blade is higher than the pressure in its suction
side, thus a very small portion of liquid flow flows back from
pressure side to the suction side. This fact is cause of tip vortex
cavitation and gap cavitation that may occur in axial pumps. In this
paper the results of our experimental investigation about movement
of tip vortex cavitation along blade edge due to reduction of pump
flow rate in an axial pump is reported. Results show that reduction of
pump flow rate in conjunction with increasing of outlet pressure
causes movement of tip vortex cavitation along blade edge towards
the blade tip. Results also show that by approaching tip vortex
cavitation to the blade tip, vortex tip pattern of cavitation replaces
with a cavitation phenomenon on the blade tip. Furthermore by
further reduction of pump flow rate and increasing of outlet pressure,
an unstable cavitation phenomenon occurs between each blade
leading edge and the next blade trailing edge.
Abstract: The decision to recruit manpower in an organization
requires clear identification of the criteria (attributes) that distinguish
successful from unsuccessful performance. The choice of appropriate
attributes or criteria in different levels of hierarchy in an organization
is a multi-criteria decision problem and therefore multi-criteria
decision making (MCDM) techniques can be used for prioritization
of such attributes. Analytic Hierarchy Process (AHP) is one such
technique that is widely used for deciding among the complex criteria
structure in different levels. In real applications, conventional AHP
still cannot reflect the human thinking style as precise data
concerning human attributes are quite hard to be extracted. Fuzzy
logic offers a systematic base in dealing with situations, which are
ambiguous or not well defined. This study aims at defining a
methodology to improve the quality of prioritization of an
employee-s performance measurement attributes under fuzziness. To
do so, a methodology based on the Extent Fuzzy Analytic Hierarchy
Process is proposed. Within the model, four main attributes such as
Subject knowledge and achievements, Research aptitude, Personal
qualities and strengths and Management skills with their subattributes
are defined. The two approaches conventional AHP
approach and the Extent Fuzzy Analytic Hierarchy Process approach
have been compared on the same hierarchy structure and criteria set.
Abstract: Compression algorithms reduce the redundancy in
data representation to decrease the storage required for that data.
Lossless compression researchers have developed highly
sophisticated approaches, such as Huffman encoding, arithmetic
encoding, the Lempel-Ziv (LZ) family, Dynamic Markov
Compression (DMC), Prediction by Partial Matching (PPM), and
Burrows-Wheeler Transform (BWT) based algorithms.
Decompression is also required to retrieve the original data by
lossless means. A compression scheme for text files coupled with
the principle of dynamic decompression, which decompresses only
the section of the compressed text file required by the user instead of
decompressing the entire text file. Dynamic decompressed files offer
better disk space utilization due to higher compression ratios
compared to most of the currently available text file formats.
Abstract: This paper proposes a Fuzzy Expert System design to
determine the wearing properties of nitrided and non nitrided steel.
The proposed Fuzzy Expert System approach helps the user and the
manufacturer to forecast the wearing properties of nitrided and non
nitrided steel under specified laboratory conditions. Surfaces of the
engineering components are often nitrided for improving wear,
corosion, fatigue specifications. A major property of nitriding
process is reducing distortion and wearing of the metalic alloys. A
Fuzzy Expert System was developed for determining the wearing and
durability properties of nitrided and non nitrided steels that were
tested under different loads and different sliding speeds in the
laboratory conditions.
Abstract: An appropriate project delivery system (PDS) is crucial
to the success of a construction projects. Case-based Reasoning (CBR)
is a useful support for PDS selection. However, the traditional CBR
approach represents cases as attribute-value vectors without taking
relations among attributes into consideration, and could not calculate
the similarity when the structures of cases are not strictly same.
Therefore, this paper solves this problem by adopting the Relational
Case-based Reasoning (RCBR) approach for PDS selection,
considering both the structural similarity and feature similarity. To
develop the feature terms of the construction projects, the criteria and
factors governing PDS selection process are first identified. Then
feature terms for the construction projects are developed. Finally, the
mechanism of similarity calculation and a case study indicate how
RCBR works for PDS selection. The adoption of RCBR in PDS
selection expands the scope of application of traditional CBR method
and improves the accuracy of the PDS selection system.
Abstract: This paper presents a new strategy of identification
and classification of pathological voices using the hybrid method
based on wavelet transform and neural networks. After speech
acquisition from a patient, the speech signal is analysed in order to
extract the acoustic parameters such as the pitch, the formants, Jitter,
and shimmer. Obtained results will be compared to those normal and
standard values thanks to a programmable database. Sounds are
collected from normal people and patients, and then classified into
two different categories. Speech data base is consists of several
pathological and normal voices collected from the national hospital
“Rabta-Tunis". Speech processing algorithm is conducted in a
supervised mode for discrimination of normal and pathology voices
and then for classification between neural and vocal pathologies
(Parkinson, Alzheimer, laryngeal, dyslexia...). Several simulation
results will be presented in function of the disease and will be
compared with the clinical diagnosis in order to have an objective
evaluation of the developed tool.
Abstract: Segmentation, filtering out of measurement errors and
identification of breakpoints are integral parts of any analysis of
microarray data for the detection of copy number variation (CNV).
Existing algorithms designed for these tasks have had some successes
in the past, but they tend to be O(N2) in either computation time or
memory requirement, or both, and the rapid advance of microarray
resolution has practically rendered such algorithms useless. Here we
propose an algorithm, SAD, that is much faster and much less thirsty
for memory – O(N) in both computation time and memory requirement
-- and offers higher accuracy. The two key ingredients of SAD are the
fundamental assumption in statistics that measurement errors are
normally distributed and the mathematical relation that the product of
two Gaussians is another Gaussian (function). We have produced a
computer program for analyzing CNV based on SAD. In addition to
being fast and small it offers two important features: quantitative
statistics for predictions and, with only two user-decided parameters,
ease of use. Its speed shows little dependence on genomic profile.
Running on an average modern computer, it completes CNV analyses
for a 262 thousand-probe array in ~1 second and a 1.8 million-probe
array in 9 seconds
Abstract: Food control measures are critical in fostering food safety management of a nation. However, no academic study has been undertaken to assess the food control system of Myanmar up to now. The objective of this research paper was to assess the food control system with in depth examination of five key components using desktop analysis and short survey from related food safety program organizations including regulators and inspectors. Study showed that the existing food control system is conventional, mainly focusing on primary health care approach while relying on reactive measures. The achievements of food control work have been limited to a certain extent due to insufficienttechnical capacity that is needed to upgrade staffs, laboratory equipment and technical assistance etc. associated with various sectors. Assessing food control measures is the first step in the integration of food safety management, this paper could assist policy makers in providing information for enhancing the safety and quality of food produced and consumed in Myanmar.
Abstract: Graph transformation has recently become more and
more popular as a general visual modeling language to formally state
the dynamic semantics of the designed models. Especially, it is a
very natural formalism for languages which basically are graph (e.g.
UML). Using this technique, we present a highly understandable yet
precise approach to formally model and analyze the behavioral
semantics of UML 2.0 Activity diagrams. In our proposal, AGG is
used to design Activities, then using our previous approach to model
checking graph transformation systems, designers can verify and
analyze designed Activity diagrams by checking the interesting
properties as combination of graph rules and LTL (Linear Temporal
Logic) formulas on the Activities.
Abstract: In this paper, we analyze the rotor eddy currents losses provoqued by the stator slot harmonics developed in the permanent magnets or pole pieces of synchronous machines. An analytical approach is presented to evaluate the effect of slot ripples on rotor field and losses calculation. This analysis is then tested on a model by 2D/3D finite element (FE) calculation. The results show a good agreement on loss calculations when skin effect is negligible and the magnet is considered.
Abstract: The objective of this work is to explicit knowledge on the interactions between the chlorophyll-a and nine meroplankton larvae of epibenthonic fauna. The studied case is the Arraial do Cabo upwelling system, Southeastern of Brazil, which provides different environmental conditions. To assess this information a network approach based in probability estimative was used. Comparisons among the generated graphs are made in the light of different water masses, application of Shannon biodiversity index, and the closeness and betweenness centralities measurements. Our results show the main pattern among different water masses and how the core organisms belonging to the network skeleton are correlated to the main environmental variable. We conclude that the approach of complex networks is a promising tool for environmental diagnostic.
Abstract: A new approach to promote the generalization ability
of neural networks is presented. It is based on the point of view of
fuzzy theory. This approach is implemented through shrinking or
magnifying the input vector, thereby reducing the difference between
training set and testing set. It is called “shrinking-magnifying
approach" (SMA). At the same time, a new algorithm; α-algorithm is
presented to find out the appropriate shrinking-magnifying-factor
(SMF) α and obtain better generalization ability of neural networks.
Quite a few simulation experiments serve to study the effect of SMA
and α-algorithm. The experiment results are discussed in detail, and
the function principle of SMA is analyzed in theory. The results of
experiments and analyses show that the new approach is not only
simpler and easier, but also is very effective to many neural networks
and many classification problems. In our experiments, the proportions
promoting the generalization ability of neural networks have even
reached 90%.
Abstract: Due to its geographical location, Iran is considered one of the earthquake-prone areas where the best way to decrease earthquake effects is supposed to be strengthening the buildings. Even though, one idea suggests that the use of adobe in constructing buildings be prohibited for its weak function especially in earthquake-prone areas, however, regarding ecological considerations, sustainability and other local skills, another idea pays special attention to adobe as one of the construction technologies which is popular among people. From the architectural and technological point of view, as strong sustainable building construction materials, compressed adobe construction materials make most of the construction in urban or rural areas ranging from small to big industrial buildings used to replace common earth blocks in traditional systems and strengthen traditional adobe buildings especially against earthquake. Mentioning efficient construction using compressed adobe system as a reliable replacement for traditional soil construction materials , this article focuses on the experiences of India in the fields of sustainable development of compressed adobe systems in the form of system in which the compressed soil is combined with cement, load bearing building with brick/solid concrete block system, brick system using rat trap bond, metal system with adobe infill and finally emphasizes on the use of these systems in the earthquake-struck city of Bam in Iran.
Abstract: The usual correctness condition for a schedule of
concurrent database transactions is some form of serializability of
the transactions. For general forms, the problem of deciding whether
a schedule is serializable is NP-complete. In those cases other approaches
to proving correctness, using proof rules that allow the steps
of the proof of serializability to be guided manually, are desirable.
Such an approach is possible in the case of conflict serializability
which is proved algebraically by deriving serial schedules using
commutativity of non-conflicting operations. However, conflict serializability
can be an unnecessarily strong form of serializability restricting
concurrency and thereby reducing performance. In practice,
weaker, more general, forms of serializability for extended models of
transactions are used. Currently, there are no known methods using
proof rules for proving those general forms of serializability. In this
paper, we define serializability for an extended model of partitioned
transactions, which we show to be as expressive as serializability
for general partitioned transactions. An algebraic method for proving
general serializability is obtained by giving an initial-algebra specification
of serializable schedules of concurrent transactions in the
model. This demonstrates that it is possible to conduct algebraic
proofs of correctness of concurrent transactions in general cases.
Abstract: It is by reason of the unified measure of varieties of resources and the unified processing of the disposal of varieties of resources, that these closely related three of new basic models called the resources assembled node and the disposition integrated node as well as the intelligent organizing node are put forth in this paper; the three closely related quantities of integrative analytical mechanics including the disposal intensity and disposal- weighted intensity as well as the charge of resource charge are set; and then the resources assembled space and the disposition integrated space as well as the intelligent organizing space are put forth. The system of fundamental equations and model of complete factor synergetics is preliminarily approached for the general situation in this paper, to form the analytical base of complete factor synergetics. By the essential variables constituting this system of equations we should set twenty variables respectively with relation to the essential dynamical effect, external synergetic action and internal synergetic action of the system.
Abstract: Pulse code modulation is a widespread technique
in digital communication with significant impact on existing
modern and proposed future communication technologies. Its
widespread utilization is due to its simplicity and attractive
spectral characteristics. In this paper, we present a new
approach to the spectral analysis of PCM signals using
Riemann-Stieltjes integrals, which is very accurate for high bit
rates. This approach can serve as a model for similar spectral
analysis of other competing modulation schemes.
Abstract: Fossil fuels are the major source to meet the world
energy requirements but its rapidly diminishing rate and adverse
effects on our ecological system are of major concern. Renewable
energy utilization is the need of time to meet the future challenges.
Ocean energy is the one of these promising energy resources. Threefourths
of the earth-s surface is covered by the oceans. This enormous
energy resource is contained in the oceans- waters, the air above the
oceans, and the land beneath them. The renewable energy source of
ocean mainly is contained in waves, ocean current and offshore solar
energy. Very fewer efforts have been made to harness this reliable
and predictable resource. Harnessing of ocean energy needs detail
knowledge of underlying mathematical governing equation and their
analysis. With the advent of extra ordinary computational resources
it is now possible to predict the wave climatology in lab simulation.
Several techniques have been developed mostly stem from numerical
analysis of Navier Stokes equations. This paper presents a brief over
view of such mathematical model and tools to understand and
analyze the wave climatology. Models of 1st, 2nd and 3rd generations
have been developed to estimate the wave characteristics to assess the
power potential. A brief overview of available wave energy
technologies is also given. A novel concept of on-shore wave energy
extraction method is also presented at the end. The concept is based
upon total energy conservation, where energy of wave is transferred
to the flexible converter to increase its kinetic energy. Squeezing
action by the external pressure on the converter body results in
increase velocities at discharge section. High velocity head then can
be used for energy storage or for direct utility of power generation.
This converter utilizes the both potential and kinetic energy of the
waves and designed for on-shore or near-shore application. Increased
wave height at the shore due to shoaling effects increases the
potential energy of the waves which is converted to renewable
energy. This approach will result in economic wave energy
converter due to near shore installation and more dense waves due to
shoaling. Method will be more efficient because of tapping both
potential and kinetic energy of the waves.