Abstract: Modern times call organizations to have an active role
in the social arena, through Corporate Social Responsibility (CSR).
The objective of this research was to test the hypothesis that there is a
positive relation between social performance and economic
performance, and if there is a positive correlation between social
performance and financial-economic performance. To test these
theories a measure of social performance, based on the Green Book
of Commission of the European Community, was used in a group of
nineteen Portuguese top companies, listed on the PSI 20 index,
through a period of five years, since 2005 to 2009. A clusters
analysis was applied to group companies by their social performance
and to compare and correlate their economic performance. Results
indicate that companies that had a better social performance are not
the ones who had a better economic performance, and suggest that
the middle path might provide a good relation CSR-Economic
performance, as a basis to a sustainable development.
Abstract: We succeeded to produce a high performance and flexible graphene/Manganese dioxide (G/MnO2) electrode coated on flexible polyethylene terephthalate (PET) substrate. The graphene film is initially synthesized by drop-casting the graphene oxide (GO) solution on the PET substrate, followed by simultaneous reduction and patterning of the dried film using carbon dioxide (CO2) laser beam with power of 1.8 W. Potentiostatic Anodic Deposition method was used to deposit thin film of MnO2 with different loading mass 10 – 50 and 100 μg.cm-2 on the pre-prepared graphene film. The electrodes were fully characterized in terms of structure, morphology, and electrochemical performance. A maximum specific capacitance of 973 F.g-1 was attributed when depositing 50μg.cm-2 MnO2 on the laser reduced graphene oxide rGO (or G/50MnO2) and over 92% of its initial capacitance was retained after 1000 cycles. The good electrochemical performance and long-term cycling stability make our proposed approach a promising candidate in the supercapacitor applications.
Abstract: A special case of floating point data representation is block
floating point format where a block of operands are forced to have a joint
exponent term. This paper deals with the finite wordlength properties of
this data format. The theoretical errors associated with the error model for
block floating point quantization process is investigated with the help of error
distribution functions. A fast and easy approximation formula for calculating
signal-to-noise ratio in quantization to block floating point format is derived.
This representation is found to be a useful compromise between fixed point
and floating point format due to its acceptable numerical error properties over
a wide dynamic range.
Abstract: Bode stability analysis based on transmission line
modeling (TLM) for single wall carbon nanotube (SWCNT)
interconnects used in 3D-VLSI circuits is investigated for the first
time. In this analysis, the dependence of the degree of relative
stability for SWCNT interconnects on the geometry of each tube has
been acquired. It is shown that, increasing the length and diameter of
each tube, SWCNT interconnects become more stable.
Abstract: The paper contains a review of the literature in terms of the critical analysis of methodologies of university ranking systems. Furthermore, the initiatives supported by the European Commission (U-Map, U-Multirank) and CHE Ranking are described. Special attention is paid to the tendencies in the development of ranking systems. According to the author, the ranking organizations should abandon the classic form of ranking, namely a hierarchical ordering of universities from “the best" to “the worse". In the empirical part of this paper, using one of the method of cluster analysis called k-means clustering, the author presents university classifications of the top universities from the Shanghai Jiao Tong University-s (SJTU) Academic Ranking of World Universities (ARWU).
Abstract: High employee turnover rate in Malaysia-s retail industry has become a major issue that needs to be addressed. This study determines the levels of job satisfaction, organizational commitment, and turnover intention of employees in a retail company in Malaysia. The relationships between job satisfaction and organizational commitment on turnover intention are also investigated. A questionnaire was developed using Job Descriptive Index, Organizational Commitment Questionnaire, and Lee and Mowday-s turnover intention items and data were collected from 62 respondents. The findings suggested that the respondents were moderately satisfied with job satisfaction facets such as promotion, work itself, co-workers, and supervisors but were unsatisfied with salary. They also had moderate commitment level with considerably high intention to leave the organization. All satisfaction facets (except for co-workers) and organizational commitment were significantly and negatively related to turnover intention. Based on the findings, retention strategies of retail employees were proposed.
Abstract: This paper proposes a genetic algorithm based on a
new replacement strategy to solve the quadratic assignment problems,
which are NP-hard. The new replacement strategy aims to improve the
performance of the genetic algorithm through well balancing the
convergence of the searching process and the diversity of the
population. In order to test the performance of the algorithm, the
instances in QAPLIB, a quadratic assignment problem library, are
tried and the results are compared with those reported in the literature.
The performance of the genetic algorithm is promising. The
significance is that this genetic algorithm is generic. It does not rely on
problem-specific genetic operators, and may be easily applied to
various types of combinatorial problems.
Abstract: This paper explains how mobile learning assures sustainable e-education for multicultural group of students. This paper reports the impact of mobile learning on distance education in multicultural environment. The emergence of learning technologies through CD, internet, and mobile is increasingly adopted by distance institutes for quick delivery and cost-effective purposes. Their sustainability is conditioned by the structure of learners as well as the teaching community. The experimental study was conducted among the distant learners of Vinayaka Missions University located at Salem in India. Students were drawn from multicultural environment based on different languages, religions, class and communities. During the mobile learning sessions, the students, who are divided on language, religion, class and community, were dominated by play impulse rather than study anxiety or cultural inhibitions. This study confirmed that mobile learning improved the performance of the students despite their division based on region, language or culture. In other words, technology was able to transcend the relative deprivation in the multicultural groups. It also confirms sustainable e-education through mobile learning and cost-effective system of instruction. Mobile learning appropriates the self-motivation and play impulse of the young learners in providing sustainable e-education to multicultural social groups of students.
Abstract: Encoded information based on synchronization of coupled chaotic Nd:YAG lasers in master-slave configuration is numerically studied. Encoding, transmission, and decoding of information in optical chaotic communication with a single channel is presented. We analyze the robustness of the encrypted audio transmission in a channel noise. In order to illustrate this synchronization robustness, we present two cases of study: synchronization and transmission with a single channel without and with noise in the channel.
Abstract: This article is an extension and a practical application
approach of Wheeler-s NEBIC theory (Net Enabled Business
Innovation Cycle). NEBIC theory is a new approach in IS research
and can be used for dynamic environment related to new technology.
Firms can follow the market changes rapidly with support of the IT
resources. Flexible firms adapt their market strategies, and respond
more quickly to customers changing behaviors. When every leading
firm in an industry has access to the same IT resources, the way that
these IT resources are managed will determine the competitive
advantages or disadvantages of firm. From Dynamic Capabilities
Perspective and from newly introduced NEBIC theory by Wheeler,
we know that only IT resources cannot deliver customer value but
good configuration of those resources can guarantee customer value
by choosing the right emerging technology, grasping the right
economic opportunities through business innovation and growth. We
found evidences in literature that SOA (Service Oriented
Architecture) is a promising emerging technology which can deliver
the desired economic opportunity through modularity, flexibility and
loose-coupling. SOA can also help firms to connect in network which
can open a new window of opportunity to collaborate in innovation
and right kind of outsourcing. There are many articles and research
reports indicates that failure rate in outsourcing is very high but at the
same time research indicates that successful outsourcing projects
adds tangible and intangible benefits to the service consumer.
Business executives and policy makers in the west should not afraid
of outsourcing but they should choose the right strategy through the
use of emerging technology to significantly reduce the failure rate in
outsourcing.
Abstract: There exists a strong correlation between efficient project management and competitive advantage for organizations. Therefore, organizations are striving to standardize and assess the rigor of their project management processes and capabilities i.e. project management maturity. Researchers and standardization organizations have developed several project management maturity models (PMMMs) to assess project management maturity of the organizations. This study presents a critical evaluation of some of the leading PMMMs against OPM3® in a multitude of ways to look at which PMMM is the most comprehensive model - which could assess most aspects of organizations and also help the organizations in gaining competitive advantage over competitors. After a detailed morphological analysis of the models, it is concluded that OPM3® is the most promising maturity model that can really provide a competitive advantage to the organizations due to its unique approach of assessment and improvement strategies.
Abstract: Cooperative organizations in Malaysia are going
through a phase of rapid growth. They are seen by the government as
another crucial vehicle to drive and boost up the country-s
economical development and growth. Hence, the issue of cooperative
governance is of great importance. Unlike literatures on corporate
governance for public listed companies-, literatures on governance
for social enterprises, in particular the cooperative organizations are
still at the early stage in Malaysia and very scant in number. This
paper will look into current practices as well as issues and challenges
related to cooperative governance. The need for a better solution
towards forming best practices of cooperative governance framework
appears imperative in deterring cases of mismanagement and fraud.
Abstract: In this paper, we will implement three-dimensional pursuit guidance law with feedback linearization control method and study the effects of parameters. First, we introduce guidance laws and equations of motion of a missile. Pursuit guidance law is our highlight. We apply feedback linearization control method to obtain the accelerations to implement pursuit guidance law. The solution makes warhead direction follow with line-of-sight. Final, the simulation results show that the exact solution derived in this paper is correct and some factors e.g. control gain, time delay, are important to implement pursuit guidance law.
Abstract: In this work, I present a review on Sparse Distributed
Memory for Small Cues (SDMSCue), a variant of Sparse Distributed
Memory (SDM) that is capable of handling small cues. I then conduct
and show some cognitive experiments on SDMSCue to test its
cognitive soundness compared to SDM. Small cues refer to input
cues that are presented to memory for reading associations; but have
many missing parts or fields from them. The original SDM failed to
handle such a problem. SDMSCue handles and overcomes this
pitfall. The main idea in SDMSCue; is the repeated projection of the
semantic space on smaller subspaces; that are selected based on the
input cue length and pattern. This process allows for Read/Write
operations using an input cue that is missing a large portion.
SDMSCue is augmented with the use of genetic algorithms for
memory allocation and initialization. I claim that SDM functionality
is a subset of SDMSCue functionality.
Abstract: High-frequency (HF) communications have been used by military organizations for more than 90 years. The opportunity of very long range communications without the need for advanced equipment makes HF a convenient and inexpensive alternative of satellite communications. Besides the advantages, voice and data transmission over HF is a challenging task, because the HF channel generally suffers from Doppler shift and spread, multi-path, cochannel interference, and many other sources of noise. In constructing an HF data modem, all these effects must be taken into account. STANAG 4539 is a NATO standard for high-speed data transmission over HF. It allows data rates up to 12800 bps over an HF channel of 3 kHz. In this work, an efficient implementation of STANAG 4539 on a single Texas Instruments- TMS320C6747 DSP chip is described. The state-of-the-art algorithms used in the receiver and the efficiency of the implementation enables real-time high-speed data / digitized voice transmission over poor HF channels.
Abstract: The present paper concerns with the influence of fiber
packing on the transverse plastic properties of metal matrix
composites. A micromechanical modeling procedure is used to
predict the effective mechanical properties of composite materials at
large tensile and compressive deformations. Microstructure is
represented by a repeating unit cell (RUC). Two fiber arrays are
considered including ideal square fiber packing and random fiber
packing defined by random sequential algorithm. The
micromechanical modeling procedure is implemented for
graphite/aluminum metal matrix composite in which the
reinforcement behaves as elastic, isotropic solids and the matrix is
modeled as an isotropic elastic-plastic solid following the von Mises
criterion with isotropic hardening and the Ramberg-Osgood
relationship between equivalent true stress and logarithmic strain.
The deformation is increased to a considerable value to evaluate both
elastic and plastic behaviors of metal matrix composites. The yields
strength and true elastic-plastic stress are determined for
graphite/aluminum composites.
Abstract: In this study, synthesis of biomemitic patterned nano
hydroxyapatite-starch biocomposites using different concentration of
starch to evaluate effect of polymer alteration on biocomposites
structural properties has been reported. Formation of hydroxyapatite
nano particles was confirmed by X-ray diffraction (XRD) and Fourier
transform infrared spectroscopy (FT-IR). Size and morphology of the
samples were characterized using scanning and transmission electron
microscopy (SEM and TEM). It seems that by increasing starch
content, the more active site of polymer (oxygen atoms) can be
provided for interaction with Ca2+ followed by phosphate and
hydroxyl group.
Abstract: Opportunistic network is a kind of Delay Tolerant Networks (DTN) where the nodes in this network come into contact with each other opportunistically and communicate wirelessly and, an end-to-end path between source and destination may have never existed, and disconnection and reconnection is common in the network. In such a network, because of the nature of opportunistic network, perhaps there is no a complete path from source to destination for most of the time and even if there is a path; the path can be very unstable and may change or break quickly. Therefore, routing is one of the main challenges in this environment and, in order to make communication possible in an opportunistic network, the intermediate nodes have to play important role in the opportunistic routing protocols. In this paper we proposed an Adaptive Fuzzy Routing in opportunistic network (AFRON). This protocol is using the simple parameters as input parameters to find the path to the destination node. Using Message Transmission Count, Message Size and Time To Live parameters as input fuzzy to increase delivery ratio and decrease the buffer consumption in the all nodes of network.
Abstract: The main aim of this paper is to develop and calibrate
an econometric model for modeling prices of long term electricity
futures contracts. The calibration of our model is performed on data
from EEX AG allowing us to capture the specific features of German
electricity market. The data sample contains several structural breaks
which have to be taken into account for modeling. We model the data
with an ARIMAX model which reveals high correlation between the
price of electricity futures contracts and prices of LT futures
contracts of fuels (namely coal, natural gas and crude oil). Besides
this, also a share price index of representative electricity companies
traded on Xetra, spread between 10Y and 1Y German bonds and
exchange rate between EUR and USD appeared to have significant
explanatory power over these futures contracts on EEX.
Abstract: Triglycerides and their derivatives are considered as viable alternatives for diesel fuels. Rice bran oil is used as diesel fuel. Highly viscous rice bran oil can be reduced by blending it with diesel fuel. The present research is aimed to investigate experimentally the performance, exhaust emission and combustion characteristics of a direct injection (DI) diesel engine, typically used in agricultural sector, over the entire load range when fuelled with rice bran oil and diesel fuel blends, RB10 (10% rice bran oil + 90% diesel fuel) to RB50. The performance, emission and combustion parameters of RB20 were found to be very close to neat diesel fuel (ND). The injector opening pressure (IOP) undoubtedly is of prime importance in diesel engine operation. Performance, emission and combustion characteristics with RB30 at enhanced IOPs are better than ND. Improved premixed heat release rate were noticed with RB30 when the IOP is enhanced.