Abstract: In this paper we present a method of abrupt cut detection with a novel logic of frames- comparison. Actual frame is compared with its motion estimated prediction instead of comparison with successive frame. Four different similarity metrics were employed to estimate the resemblance of compared frames. Obtained results were evaluated by standard used measures of test accuracy and compared with existing approach. Based on the results, we claim the proposed method is more effective and Pearson correlation coefficient obtained the best results among chosen similarity metrics.
Abstract: This study presents a new approach based on Tanaka's
fuzzy linear regression (FLP) algorithm to solve well-known power
system economic load dispatch problem (ELD). Tanaka's fuzzy linear
regression (FLP) formulation will be employed to compute the
optimal solution of optimization problem after linearization. The
unknowns are expressed as fuzzy numbers with a triangular
membership function that has middle and spread value reflected on
the unknowns. The proposed fuzzy model is formulated as a linear
optimization problem, where the objective is to minimize the sum of
the spread of the unknowns, subject to double inequality constraints.
Linear programming technique is employed to obtain the middle and
the symmetric spread for every unknown (power generation level).
Simulation results of the proposed approach will be compared with
those reported in literature.
Abstract: Information sharing and exchange, rather than
information processing, is what characterizes information
technology in the 21st century. Ontologies, as shared common
understanding, gain increasing attention, as they appear as the
most promising solution to enable information sharing both at
a semantic level and in a machine-processable way. Domain
Ontology-based modeling has been exploited to provide
shareability and information exchange among diversified,
heterogeneous applications of enterprises.
Contextual ontologies are “an explicit specification of
contextual conceptualization". That is: ontology is
characterized by concepts that have multiple representations
and they may exist in several contexts. Hence, contextual
ontologies are a set of concepts and relationships, which are
seen from different perspectives. Contextualization is to allow
for ontologies to be partitioned according to their contexts.
The need for contextual ontologies in enterprise modeling
has become crucial due to the nature of today's competitive
market. Information resources in enterprise is distributed and
diversified and is in need to be shared and communicated
locally through the intranet and globally though the internet.
This paper discusses the roles that ontologies play in an
enterprise modeling, and how ontologies assist in building a
conceptual model in order to provide communicative and
interoperable information systems. The issue of enterprise
modeling based on contextual domain ontology is also
investigated, and a framework is proposed for an enterprise
model that consists of various applications.
Abstract: This paper presents a experiment to estimate the
influences of cutting conditions in microstructure changes of
machining austenitic 304 stainless steel, especially for wear insert. The
wear insert were prefabricated with a width of 0.5 mm. And the forces,
temperature distribution, RS, and microstructure changes were
measured by force dynamometer, infrared thermal camera, X-ray
diffraction, XRD, SEM, respectively. The results told that the different
combinations of machining condition have a significant influence on
machined surface microstructure changes. In addition to that, the
ANOVA and AOMwere used to tell the different influences of cutting
speed, feed rate, and wear insert.
Abstract: The extraction of meaningful information from image
could be an alternative method for time series analysis. In this paper,
we propose a graphical analysis of time series grouped into table
with adjusted colour scale for numerical values. The advantages of
this method are also discussed. The proposed method is easy to
understand and is flexible to implement the standard methods of
pattern recognition and verification, especially for noisy
environmental data.
Abstract: Heat-inducible gene expression vectors are useful for hyperthermia-induced cancer gene therapy, because the combination
of hyperthermia and gene therapy can considerably improve the therapeutic effects. In the present study, we developed an enhanced
heat-inducible transgene expression system in which a heat-shock
protein (HSP) promoter and tetracycline-responsive transactivator
were combined. When the transactivator plasmid containing the
tetracycline-responsive transactivator gene was co-transfected with
the reporter gene expression plasmid, a high level of heat-induced gene expression was observed compared with that using the HSP
promoter without the transactivator. In vitro evaluation of the
therapeutic effect using HeLa cells showed that heat-induced therapeutic gene expression caused cell death in a high percentage of
these cells, indicating that this strategy is promising for cancer gene therapy.
Abstract: In this paper, we present local image descriptor using
VQ-SIFT for more effective and efficient image retrieval. Instead of
SIFT's weighted orientation histograms, we apply vector quantization
(VQ) histogram as an alternate representation for SIFT features.
Experimental results show that SIFT features using VQ-based local
descriptors can achieve better image retrieval accuracy than the
conventional algorithm while the computational cost is significantly
reduced.
Abstract: This study examines the possibility to apply the theory of multidimensional accounting (momentum accounting) in a Brazilian Navy-s Services Provider Military Organization (Organização Militar Prestadora de Serviços - OMPS). In general, the core of the said theory is the fact that Accounting does not recognize the inertia of transactions occurring in an entity, and that occur repeatedly in some cases, regardless of the implementation of new actions by its managers. The study evaluates the possibility of greater use of information recorded in the financial statements of the unit of analysis, within the strategic decisions of the organization. As a research strategy, we adopted the case study. The results infer that it is possible to use the theory in the context of a multidimensional OMPS, promoting useful information for decision-making and thereby contributing to the strengthening of the necessary alignment of its administration with the current desires of the Brazilian society.
Abstract: In this paper, the modified optimal sliding mode control with a proposed method to design a sliding surface is presented. Because of the inability of the previous approach of the sliding mode method to design a bounded and suitable input, the new variation is proposed in the sliding manifold to obviate problems in a structural system. Although the sliding mode control is a powerful method to reject disturbances and noises, the chattering problem is not good for actuators. To decrease the chattering phenomena, the optimal control is added to the sliding mode control. Not only the proposed method can decline the intense variations in the inputs of the system but also it can produce the efficient responses respect to the sliding mode control and optimal control that are shown by performing some numerical simulations.
Abstract: The proposed system identifies the species of the wood
using the textural features present in its barks. Each species of a wood
has its own unique patterns in its bark, which enabled the proposed
system to identify it accurately. Automatic wood recognition system
has not yet been well established mainly due to lack of research in this
area and the difficulty in obtaining the wood database. In our work, a
wood recognition system has been designed based on pre-processing
techniques, feature extraction and by correlating the features of those
wood species for their classification. Texture classification is a problem
that has been studied and tested using different methods due to its
valuable usage in various pattern recognition problems, such as wood
recognition, rock classification. The most popular technique used
for the textural classification is Gray-level Co-occurrence Matrices
(GLCM). The features from the enhanced images are thus extracted
using the GLCM is correlated, which determines the classification
between the various wood species. The result thus obtained shows a
high rate of recognition accuracy proving that the techniques used in
suitable to be implemented for commercial purposes.
Abstract: This study was carried out in Ankara, the capital city of Turkey, in order to determine how people living in the slums of Ankara benefit from educational equality. Within the scope of the research, interviews were made with 64 families whose children have been getting education from the primary schools of these parts and the data of the study was collected by the researcher. The results of the research demonstrate that the children getting education in the slums of Ankara can not experience educational equality and justice. The results of this study show that the opportunities of the schools in the slums of Ankara are very limited, so the individuals in these districts can not equally benefit from the education. The families are aware of the problem they are faced with. KeywordsDiscrimination, inequality, primary education, slums of Turkey.
Abstract: High quality requirements analysis is one of the most
crucial activities to ensure the success of a software project, so that
requirements verification for software system becomes more and more
important in Requirements Engineering (RE) and it is one of the most
helpful strategies for improving the quality of software system.
Related works show that requirement elicitation and analysis can be
facilitated by ontological approaches and semantic web technologies.
In this paper, we proposed a hybrid method which aims to verify
requirements with structural and formal semantics to detect
interactions. The proposed method is twofold: one is for modeling
requirements with the semantic web language OWL, to construct a
semantic context; the other is a set of interaction detection rules which
are derived from scenario-based analysis and represented with
semantic web rule language (SWRL). SWRL based rules are working
with rule engines like Jess to reason in semantic context for
requirements thus to detect interactions. The benefits of the proposed
method lie in three aspects: the method (i) provides systematic steps
for modeling requirements with an ontological approach, (ii) offers
synergy of requirements elicitation and domain engineering for
knowledge sharing, and (3)the proposed rules can systematically assist
in requirements interaction detection.
Abstract: Work stress causes the organizational work-life
imbalance of employees. Because of this imbalance, workers perform
with lower effort to finish assignments and thus an organization will
experience reduced productivity. In order to investigate the problem
of an organizational work-life imbalance, this qualitative case study
focuses on an organizational work-life imbalance among Thai
software developers in a German-owned company in Chiang Mai,
Thailand. In terms of knowledge management, fishbone diagram is
useful analysis tool to investigate the root causes of an organizational
work-life imbalance systematically in focus-group discussions.
Furthermore, fishbone diagram shows the relationship between
causes and effects clearly. It was found that an organizational worklife
imbalance among Thai software developers is influenced by
management team, work environment, and information tools used in
the company over time.
Abstract: This paper present an effective method to accurately reconstruct and measure the 3D curve edges of small industrial parts based on stereo vision. To effectively fit the curve of the measured parts using a series of line segments in the images, a strategy from coarse to fine is employed based on multi-scale curve fitting. After reconstructing the 3D curve of a hole through a curved surface, its axis is adjusted so that it is parallel to the Z axis with least squares error and the dimensions of the hole can be calculated on the XY plane easily. Experimental results show that the presented method can accurately measure the dimensions of round holes through a curved surface.
Abstract: Logistics is part of the supply chain processes that plans, implements, and controls the efficient and effective forward and reverse flow and storage of goods, services, and related information between the point of origin and the point of consumption in order to meet customer requirements. This research aims to investigate the current status and future direction of the use of Information Technology (IT) for logistics, focusing on Supply Chain Management (SCM) and E-Commerce adoption in Johor. Therefore, this research stresses on the type of technology being adopted, factors, benefits and barriers affecting the innovation in SCM and ECommerce technology adoption among Logistics Service Providers (LSP). A mailed questionnaire survey was conducted to collect data from 265 logistics companies in Johor. The research revealed that SCM technology adoption among LSP was higher as they had adopted SCM technology in various business processes while they perceived a high level of benefits from SCM adoption. Obviously, ECommerce technology adoption among LSP is relatively low.
Abstract: In this study, the effect of nanofluids on the pool film
boiling was experimentally investigated at saturated condition under
atmospheric pressure. For this purpose, four different water-based
nanofluids (Al2O3, SiO2, TiO2 and CuO) with 0.1% particle volume
fraction were prepared. To investigate the boiling heat transfer, a
cylindrical rod with high temperature was used. The rod heated up to
high temperatures was immersed into nanofluids. The center
temperature of rod during the cooling process was recorded by using
a K-type thermocouple. The quenching curves showed that the pool
boiling heat transfer was strongly dependent on the nanoparticle
materials. During the repetitive quenching tests, the cooling time
decreased and thus, the film boiling vanished. Consequently, the
primary reason of this was the change of the surface characteristics
due to the nanoparticles deposition on the rod-s surface.
Abstract: Groundwater has become the most dependable source
of fresh water for agriculture, domestic and industrial uses in the past
few decades. This wide use of groundwater if left uncontrolled and
unseen will lead to overexploitation causing sea water intrusion in the
coastal areas and illegal water marketing. Several Policies and Acts
have been enacted to regulate and manage the use of this valuable
resource. In spite of this the over extraction of groundwater beyond
the recharging capacity of aquifers and depletion in the quality of
groundwater is continuing. The current study aims at reviewing the
Acts and Policies existing in the State of Tamil Nadu and in the
National level regarding groundwater regulation and management.
Further an analysis is made on the rights associated with the usage of
groundwater resources and the gaps in these policies have been
analyzed. Some suggestions are made to reform the existing
groundwater policies for better management and regulation of the
resource.
Abstract: In this paper, a delayed physiological control system is investigated. The sufficient conditions for stability of positive equilibrium and existence of local Hopf bifurcation are derived. Furthermore, global existence of periodic solutions is established by using the global Hopf bifurcation theory. Finally, numerical examples are given to support the theoretical analysis.
Abstract: The object of this research is the design and
evaluation of an immersive Virtual Learning Environment (VLE) for
deaf children. Recently we have developed a prototype immersive
VR game to teach sign language mathematics to deaf students age K-
4 [1] [2]. In this paper we describe a significant extension of the
prototype application. The extension includes: (1) user-centered
design and implementation of two additional interactive
environments (a clock store and a bakery), and (2) user-centered
evaluation including development of user tasks, expert panel-based
evaluation, and formative evaluation. This paper is one of the few to
focus on the importance of user-centered, iterative design in VR
application development, and to describe a structured evaluation
method.
Abstract: In this paper, a new formulation for acoustics coupled with linear elasticity is presented. The primary objective of the work is to develop a three dimensional hp adaptive finite element method code destinated for modeling of acoustics of human head. The code will have numerous applications e.g. in designing hearing protection devices for individuals working in high noise environments. The presented work is in the preliminary stage. The variational formulation has been implemented and tested on a sequence of meshes with concentric multi-layer spheres, with material data representing the tissue (the brain), skull and the air. Thus, an efficient solver for coupled elasticity/acoustics problems has been developed, and tested on high contrast material data representing the human head.