Abstract: This paper features the trajectory planning design of a indigenously developed 4-Axis SCARA robot which is used for doing successful robotic manipulation task in the laboratory. Once, a trajectory is being designed and given as input to the robot, the robot's gripper tip moves along that specified trajectory. Trajectories have to be designed in the work space only. The main idea of this paper is to design a continuous path trajectory model for the indigenously developed SCARA robot arm during its maneuvering from one point to another point (during pick and place operations) in a workspace avoiding all the obstacles in its path of motion.
Abstract: This paper proposes an adaptive sliding mode
controller which combines adaptive control and sliding
mode control to control a nonlinear robotic manipulator
with uncertain parameters. We use an adaptive algorithm
based on the concept of sliding mode control to alleviate the
chattering phenomenon of control input. Adaptive laws are
developed to obtain the gain of switching input and the
boundary layer parameters. The stability and convergence
of the robotic manipulator control system are guaranteed
by applying the Lyapunov theorem. Simulation results
demonstrate that the chattering of control input can be
alleviated effectively. The proposed controller scheme can
assure robustness against a large class of uncertainties and
achieve good trajectory tracking performance.
Abstract: We present a hardware oriented method for real-time
measurements of object-s position in video. The targeted application
area is light spots used as references for robotic navigation. Different
algorithms for dynamic thresholding are explored in combination
with component labeling and Center Of Gravity (COG) for highest
possible precision versus Signal-to-Noise Ratio (SNR). This method
was developed with a low hardware cost in focus having only one
convolution operation required for preprocessing of data.
Abstract: A multi-agent type robot for disaster response in calamity scene is proposed in this paper. The proposed grouped rescue robots can perform cooperative reconnaissance and surveillance to achieve a given rescue mission. The multi-agent rescue of dual set robot consists of one master set and three slave units. The research for this rescue robot system is going to detect at harmful environment where human is unreachable, such as the building is infected with virus or the factory has hazardous liquid in effluent. As a dual set robot, with Bluetooth and communication network, the master set can connect with slave units and send information back to computer by wireless and monitor. Therefore, rescuer can be informed the real-time information in a calamity area. Furthermore, each slave robot is able to obstacle avoidance by ultrasonic sensors, and encodes distance and location by compass. The master robot can integrate every devices information to increase the efficiency of prospected and research unknown area.
Abstract: In modern day disaster recovery mission has become
one of the top priorities in any natural disaster management regime.
Smart autonomous robots may play a significant role in such
missions, including search for life under earth quake hit rubbles,
Tsunami hit islands, de-mining in war affected areas and many other
such situations. In this paper current state of many walking robots are
compared and advantages of hexapod systems against wheeled robots
are described. In our research we have selected a hexapod spider
robot; we are developing focusing mainly on efficient navigation
method in different terrain using apposite gait of locomotion, which
will make it faster and at the same time energy efficient to navigate
and negotiate difficult terrain. This paper describes the method of
terrain negotiation navigation in a hazardous field.
Abstract: Recent fifteen years witnessed fast improvements in the field of humanoid robotics. The human-like robot structure is
more suitable to human environment with its supreme obstacle avoidance properties when compared with wheeled service robots.
However, the walking control for bipedal robots is a challenging task
due to their complex dynamics. Stable reference generation plays a very important role in control.
Linear Inverted Pendulum Model (LIPM) and the Zero Moment Point (ZMP) criterion are applied in a number of studies for stable
walking reference generation of biped walking robots. This paper follows this main approach too. We propose a natural and continuous ZMP reference trajectory for a stable and human-like walk. The ZMP reference trajectories move forward under the sole of the support foot when the robot body is supported by a single leg. Robot center of mass trajectory is obtained
from predefined ZMP reference trajectories by a Fourier series
approximation method. The Gibbs phenomenon problem common with Fourier approximations of discontinuous functions is avoided by employing continuous ZMP references. Also, these ZMP reference
trajectories possess pre-assigned single and double support phases,
which are very useful in experimental tuning work.
The ZMP based reference generation strategy is tested via threedimensional
full-dynamics simulations of a 12-degrees-of-freedom
biped robot model. Simulation results indicate that the proposed reference trajectory generation technique is successful.
Abstract: The purpose of this paper is to present the design and
instrumentation of a new benchmark multivariable nonlinear control
laboratory. The mathematical model of this system may be used to
test the applicability and performance of various nonlinear control
procedures. The system is a two degree-of-freedom robotic arm with
soft and hard (discontinuous) nonlinear terms. Two novel
mechanisms are designed to allow the implementation of adjustable
Coulomb friction and backlash.
Abstract: This paper presents a sensor-based motion planning algorithm for 3-DOF car-like robots with a nonholonomic constraint. Similar to the classic Bug family algorithms, the proposed algorithm enables the car-like robot to navigate in a completely unknown environment using only the range sensor information. The car-like robot uses the local range sensor view to determine the local path so that it moves towards the goal. To guarantee that the robot can approach the goal, the two modes of motion are repeated, termed motion-to-goal and wall-following. The motion-to-goal behavior lets the robot directly move toward the goal, and the wall-following behavior makes the robot circumnavigate the obstacle boundary until it meets the leaving condition. For each behavior, the nonholonomic motion for the car-like robot is planned in terms of the instantaneous turning radius. The proposed algorithm is implemented to the real robot and the experimental results show the performance of proposed algorithm.
Abstract: This paper presents the novel Rao-Blackwellised
particle filter (RBPF) for mobile robot simultaneous localization and
mapping (SLAM) using monocular vision. The particle filter is
combined with unscented Kalman filter (UKF) to extending the path
posterior by sampling new poses that integrate the current observation
which drastically reduces the uncertainty about the robot pose. The
landmark position estimation and update is also implemented through
UKF. Furthermore, the number of resampling steps is determined
adaptively, which seriously reduces the particle depletion problem,
and introducing the evolution strategies (ES) for avoiding particle
impoverishment. The 3D natural point landmarks are structured with
matching Scale Invariant Feature Transform (SIFT) feature pairs. The
matching for multi-dimension SIFT features is implemented with a
KD-Tree in the time cost of O(log2
N). Experiment results on real robot
in our indoor environment show the advantages of our methods over
previous approaches.
Abstract: Since Software testing becomes an important part of
Software development in order to improve the quality of software,
many automation tools are created to help testing functionality of
software. There are a few issues about usability of these tools, one is
that the result log which is generated from tools contains useless
information that the tester cannot use result log to communicate
efficiently, or the result log needs to use a specific application to open.
This paper introduces a new method, SBTAR that improves usability
of automated test tools in a part of a result log. The practice will use
the capability of tools named as IBM Rational Robot to create a
customized function, the function would generate new format of a
result log which contains useful information faster and easier to
understand than using the original result log which was generated
from the tools. This result log also increases flexibility by Microsoft
Word or WordPad to make them readable.
Abstract: This paper deals with motion planning of multiple
mobile robots. Mobile robots working together to achieve several
objectives have many advantages over single robot system. However,
the planning and coordination between the mobile robots is
extremely difficult. In the present investigation rule-based and rulebased-
neuro-fuzzy techniques are analyzed for multiple mobile
robots navigation in an unknown or partially known environment.
The final aims of the robots are to reach some pre-defined goals.
Based upon a reference motion, direction; distances between the
robots and obstacles; and distances between the robots and targets;
different types of rules are taken heuristically and refined later to find
the steering angle. The control system combines a repelling influence
related to the distance between robots and nearby obstacles and with
an attracting influence between the robots and targets. Then a hybrid
rule-based-neuro-fuzzy technique is analysed to find the steering
angle of the robots. Simulation results show that the proposed rulebased-
neuro-fuzzy technique can improve navigation performance in
complex and unknown environments compared to this simple rulebased
technique.
Abstract: The research on two-wheels balancing robot has
gained momentum due to their functionality and reliability when
completing certain tasks. This paper presents investigations into the
performance comparison of Linear Quadratic Regulator (LQR) and
PID-PID controllers for a highly nonlinear 2–wheels balancing robot.
The mathematical model of 2-wheels balancing robot that is highly
nonlinear is derived. The final model is then represented in statespace
form and the system suffers from mismatched condition. Two
system responses namely the robot position and robot angular
position are obtained. The performances of the LQR and PID-PID
controllers are examined in terms of input tracking and disturbances
rejection capability. Simulation results of the responses of the
nonlinear 2–wheels balancing robot are presented in time domain. A
comparative assessment of both control schemes to the system
performance is presented and discussed.
Abstract: We present a BeeBot, Binus Multi-client Intelligent Telepresence Robot, a custom-build robot system specifically designed for teleconference with multiple person using omni directional actuator. The robot is controlled using a computer networks, so the manager/supervisor can direct the robot to the intended person to start a discussion/inspection. People tracking and autonomous navigation are intelligent features of this robot. We build a web application for controlling the multi-client telepresence robot and open-source teleconference system used. Experimental result presented and we evaluated its performance.
Abstract: This paper presents a new problem solving approach
that is able to generate optimal policy solution for finite-state
stochastic sequential decision-making problems with high data
efficiency. The proposed algorithm iteratively builds and improves
an approximate Markov Decision Process (MDP) model along with
cost-to-go value approximates by generating finite length trajectories
through the state-space. The approach creates a synergy between an
approximate evolving model and approximate cost-to-go values to
produce a sequence of improving policies finally converging to the
optimal policy through an intelligent and structured search of the
policy space. The approach modifies the policy update step of the
policy iteration so as to result in a speedy and stable convergence to
the optimal policy. We apply the algorithm to a non-holonomic
mobile robot control problem and compare its performance with
other Reinforcement Learning (RL) approaches, e.g., a) Q-learning,
b) Watkins Q(λ), c) SARSA(λ).
Abstract: In this paper, the periodic surveillance scheme has
been proposed for any convex region using mobile wireless sensor
nodes. A sensor network typically consists of fixed number of
sensor nodes which report the measurements of sensed data such as
temperature, pressure, humidity, etc., of its immediate proximity
(the area within its sensing range). For the purpose of sensing an
area of interest, there are adequate number of fixed sensor
nodes required to cover the entire region of interest. It implies
that the number of fixed sensor nodes required to cover a given
area will depend on the sensing range of the sensor as well as
deployment strategies employed. It is assumed that the sensors to
be mobile within the region of surveillance, can be mounted on
moving bodies like robots or vehicle. Therefore, in our
scheme, the surveillance time period determines the number of
sensor nodes required to be deployed in the region of interest.
The proposed scheme comprises of three algorithms namely:
Hexagonalization, Clustering, and Scheduling, The first algorithm
partitions the coverage area into fixed sized hexagons that
approximate the sensing range (cell) of individual sensor node.
The clustering algorithm groups the cells into clusters, each of
which will be covered by a single sensor node. The later
determines a schedule for each sensor to serve its respective cluster.
Each sensor node traverses all the cells belonging to the cluster
assigned to it by oscillating between the first and the last cell for
the duration of its life time. Simulation results show that our
scheme provides full coverage within a given period of time using
few sensors with minimum movement, less power consumption,
and relatively less infrastructure cost.
Abstract: This paper presents three-phase evolution search methodology to automatically design fuzzy logic controllers (FLCs) that can work in a wide range of operating conditions. These include varying load, parameter variations, and unknown external disturbances. The three-phase scheme consists of an exploration phase, an exploitation phase and a robustness phase. The first two phases search for FLC with high accuracy performances while the last phase aims at obtaining FLC providing the best compromise between the accuracy and robustness performances. Simulations were performed for direct-drive two-axis robot arm. The evolved FLC with the proposed design technique found to provide a very satisfactory performance under the wide range of operation conditions and to overcome problem associated with coupling and nonlinearities characteristics inherent to robot arms.
Abstract: In this paper a simple terrain evaluation method for
hexapod robot is introduced. This method is based on feet coordinate
evaluation when all are on the ground. Depending on the feet
coordinate differences the local terrain evaluation is possible. Terrain
evaluation is necessary for right gait selection and/or body position
correction. For terrain roughness evaluation three planes are plotted:
two of them as definition points use opposite feet coordinates, third
coincides with the robot body plane. The leaning angle of body plane
is evaluated measuring gravity force using three-axis accelerometer.
Terrain roughness evaluation method is based on angle estimation
between normal vectors of these planes. Aim of this work is to
present a simple method for embedded robot controller, allowing to
find the best further movement settings.
Abstract: In this work, a new approach is proposed to control
the manipulators for Humanoid robot. The kinematics of the
manipulators in terms of joint positions, velocity, acceleration and
torque of each joint is computed using the Denavit Hardenberg (D-H)
notations. These variables are used to design the manipulator control
system, which has been proposed in this work. In view of supporting
the development of a controller, a simulation of the manipulator is
designed for Humanoid robot. This simulation is developed through
the use of the Virtual Reality Toolbox and Simulink in Matlab. The
Virtual Reality Toolbox in Matlab provides the interfacing and
controls to an environment which is developed based on the Virtual
Reality Modeling Language (VRML). Chains of bones were used to
represent the robot.
Abstract: As we make progressive products for good works, and
future industries want to get higher speed and resolution from various
developments in the robotics as well as precise control system, the
concept of control feedback is getting more important. Within a range
of industrial developments, the concept is most responsible for the
high reliability of a device. We explain an efficient analyzing method
of a rotary encoder such as an incremental type encoder and absolute
type encoder using the LabVIEW program
Abstract: This paper summaries basic principles and concepts of
intelligent controls, implemented in humanoid robotics as well as
recent algorithms being devised for advanced control of humanoid
robots. Secondly, this paper presents a new approach neuro-fuzzy
system. We have included some simulating results from our
computational intelligence technique that will be applied to our
humanoid robot. Subsequently, we determine a relationship between
joint trajectories and located forces on robot-s foot through a
proposed neuro-fuzzy technique.