Abstract: There are various solutions for improving existing overhead line systems with the general purpose of increasing their limited capacity. The capacity reserve of the existing overhead lines is an important problem that must be considered from different aspects. The paper contains a comparative analysis of the mechanical and thermal limitations of an existing overhead line based on certain calculation conditions characterizing the examined variants. The methodology of the proposed estimation of the permissible conductor temperature and maximum load current is described in detail. The transmission line model consists of specific information of an existing overhead line of the Latvian power network. The main purpose of the simulation tasks is to find an additional capacity reserve by using accurate mathematical models. The results of the obtained data are presented.
Abstract: This paper evaluates the performance of a novel
algorithm for tracking of a mobile node, interms of execution time
and root mean square error (RMSE). Particle Filter algorithm is used
to track the mobile node, however a new technique in particle filter
algorithm is also proposed to reduce the execution time. The
stationary points were calculated through trilateration and finally by
averaging the number of points collected for a specific time, whereas
tracking is done through trilateration as well as particle filter
algorithm. Wi-Fi signal is used to get initial guess of the position of
mobile node in x-y coordinates system. Commercially available
software “Wireless Mon" was used to read the WiFi signal strength
from the WiFi card. Visual Cµ version 6 was used to interact with
this software to read only the required data from the log-file
generated by “Wireless Mon" software. Results are evaluated through
mathematical modeling and MATLAB simulation.
Abstract: This paper presents the design, development and characterization of contractile water jet thruster (CWJT) for mini underwater robot. Instead of electric motor, this CWJT utilizes the Ionic Polymer Metal Composite (IPMC) as the actuator to generate the water jet. The main focus of this paper is to analyze the conceptual design of the proposed CWJT which would determine the thrust force value, jet flow behavior and actuator’s stress. Those thrust force and jet flow studies were carried out using Matlab/Simscape simulation software. The actuator stress had been analyzed using COSMOS simulation software. The results showed that there was no significant change for jet velocity at variable cross sectional nozzle area. However, a significant change was detected for jet velocity at different nozzle cross sectional area ratio which was up to 37%. The generated thrust force has proportional relation to the nozzle cross sectional area.
Abstract: Carriers scattering in the inversion channel of n-
MOSFET dominates the drain current. This paper presents an effective
electron mobility model for the pocket implanted nano scale
n-MOSFET. The model is developed by using two linear pocket
profiles at the source and drain edges. The channel is divided into
three regions at source, drain and central part of the channel region.
The total number of inversion layer charges is found for these three
regions by numerical integration from source to drain ends and the
number of depletion layer charges is found by using the effective
doping concentration including pocket doping effects. These two
charges are then used to find the effective normal electric field,
which is used to find the effective mobility model incorporating the
three scattering mechanisms, such as, Coulomb, phonon and surface
roughness scatterings as well as the ballistic phenomena for the
pocket implanted nano-scale n-MOSFET. The simulation results show
that the derived mobility model produces the same results as found
in the literatures.
Abstract: This work concerns the measurements of a Bulk
Acoustic Waves (BAW) emission filter S parameters and compare
with prototypes simulated types. Thanks to HP-ADS, a co-simulation
of filters- characteristics in a digital radio-communication chain is
performed. Four cases of modulation schemes are studied in order to
illustrate the impact of the spectral occupation of the modulated
signal. Results of simulations and co-simulation are given in terms of
Error Vector Measurements to be useful for a general sensibility
analysis of 4th/3rd Generation (G.) emitters (wideband QAM and
OFDM signals)
Abstract: The production and consumption of natural gas is on
the rise throughout the world as a result of its wide availability, ease
of transportation, use and clean-burning characteristics. The chief use
of ethane is in the chemical industry in the production of Ethene
(ethylene) by steam cracking. In this simulation, obtained ethane
recovery percent based on Gas sub-cooled process (GSP) is 99.9 by
mole that is included 32.1% by using de-methanizer column and
67.8% by de-ethanizer tower. The outstanding feature of this process
is the novel split-vapor concept that employs to generate reflux for
de-methanizer column. Remain amount of ethane in export gas cause
rise in gross heating value up to 36.66 MJ/Nm3 in order to use in
industrial and household consumptions.
Abstract: A pilot plant for continuous flow microwave-assisted
chemical reaction combined with microreactors was developed and
water heating tests were conducted for evaluation of the developed
plant. We developed a microwave apparatus having a single
microwave generator that can heat reaction solutions in four reaction
fields simultaneously in order to increase throughput. We also
designed a four-branch waveguide using electromagnetic simulation,
and found that the transmission efficiency at 99%. Finally, we
developed the pilot plant using the developed microwave apparatus
and conducted water heating tests. The temperatures in the respective
reaction fields were controlled within ±1.1 K at 353.2 K. Moreover,
the energy absorption rates by the water were about 90% in the
respective reaction fields, whereas the energy absorption rate was
about 40% when 100 cm3 of water was heated by a commercially
available multimode microwave chemical reactor.
Abstract: This paper proposes an efficient finite precision block floating point (BFP) treatment to the fixed coefficient finite impulse response (FIR) digital filter. The treatment includes effective implementation of all the three forms of the conventional FIR filters, namely, direct form, cascaded and par- allel, and a roundoff error analysis of them in the BFP format. An effective block formatting algorithm together with an adaptive scaling factor is pro- posed to make the realizations more simple from hardware view point. To this end, a generic relation between the tap weight vector length and the input block length is deduced. The implementation scheme also emphasises on a simple block exponent update technique to prevent overflow even during the block to block transition phase. The roundoff noise is also investigated along the analogous lines, taking into consideration these implementational issues. The simulation results show that the BFP roundoff errors depend on the sig- nal level almost in the same way as floating point roundoff noise, resulting in approximately constant signal to noise ratio over a relatively large dynamic range.
Abstract: After the terrorist attack on September 11, 2001 in
U.S., the container security issue got high attention, especially by U.S.
government, which deployed a lot of measures to promote or improve
security systems. U.S. government not only enhances its national
security system, but allies with other countries against the potential
terrorist attacks in the future. For example CSI (Container Security
Initiative), it encourages foreign ports outside U.S. to become CSI
ports as a part of U.S. anti-terrorism network. Although promotion of
the security could partly reach the goal of anti-terrorism, that will
influence the efficiency of container supply chain, which is the main
concern when implementing the inspection measurements. This paper
proposes a quick estimation methodology for an inspection service
rate by a berth allocation heuristic such that the inspection activities
will not affect the original container supply chain. Theoretical and
simulation results show this approach is effective.
Abstract: Laboratory classes in Electrical Engineering are often hampered by safety issues, as students have to work on high voltage lines. One solution is to make use of virtual laboratory simulations, to help students understand the concepts taught in their coursework. In this context, we have conceived and implemented virtual lab experiments in connection with the study of earthing arrangements. In this work, software was developed, which aid student in understanding the working of a residual current device (RCD) in a TT earthing system. Various parameters, such as the earthing resistances, leakage currents and harmonics were included for a TT system with RCD connection.
Abstract: This work describes a CACSD tool for automatic design of robust controllers for hydraulic turbines. The tool calculates the optimal controller using the MATLAB hinfopt function and it
serves as a practical and effective solution for the laborious task of
designing a different controller for each type of turbine and generator, and different parameters and conditions of the plant. Results of the simulation of a generating unit subject to parameters
variation show the accuracy and efficiency of the obtained robust
controllers.
Abstract: The economic and stable operation was affected
seriously by coal quality disturbance for power plants. Based on model
analysis, influence of the disturbance can be considered as gain change
of control system. Power capability coefficient of coal was
constructed to inhibit it. Accuracy of the coefficient was verified by
operating data. Then coal quality disturbance free system based on
gain scheduling was designed for coordinated control system.
Simulation showed that, the strategy improved control quality
obviously, and inhibited the coal quality disturbance.
Abstract: Linear convolutive filters are fast in calculation and in application, and thus, often used for real-time processing of continuous data streams. In the case of transient signals, a filter has not only to detect the presence of a specific waveform, but to estimate its arrival time as well. In this study, a measure is presented which indicates the performance of detectors in achieving both of these tasks simultaneously. Furthermore, a new sub-class of linear filters within the class of filters which minimize the quadratic response is proposed. The proposed filters are more flexible than the existing ones, like the adaptive matched filter or the minimum power distortionless response beamformer, and prove to be superior with respect to that measure in certain settings. Simulations of a real-time scenario confirm the advantage of these filters as well as the usefulness of the performance measure.
Abstract: In Secondary Surveillance Radar (SSR) systems, it is
more difficult to locate and recognise aircrafts in the neighbourhood of civil airports since aerial traffic becomes greater. Here, we propose to apply a recent Blind Source Separation (BSS) algorithm based
on Time-Frequency Analysis, in order to separate messages sent by different aircrafts and falling in the same radar beam in reception. The above source separation method involves joint-diagonalization
of a set of smoothed version of spatial Wigner-Ville distributions.
The technique makes use of the difference in the t-f signatures of the nonstationary sources to be separated. Consequently, as the SSR sources emit different messages at different frequencies, the above fitted to this new application. We applied the technique in simulation to separate SSR replies. Results are provided at the end
of the paper.
Abstract: There is a world-wide need for the development of sustainable management strategies to control pest infestation and the development of phosphine (PH3) resistance in lesser grain borer (Rhyzopertha dominica). Computer simulation models can provide a relatively fast, safe and inexpensive way to weigh the merits of various management options. However, the usefulness of simulation models relies on the accurate estimation of important model parameters, such as mortality. Concentration and time of exposure are both important in determining mortality in response to a toxic agent. Recent research indicated the existence of two resistance phenotypes in R. dominica in Australia, weak and strong, and revealed that the presence of resistance alleles at two loci confers strong resistance, thus motivating the construction of a two-locus model of resistance. Experimental data sets on purified pest strains, each corresponding to a single genotype of our two-locus model, were also available. Hence it became possible to explicitly include mortalities of the different genotypes in the model. In this paper we described how we used two generalized linear models (GLM), probit and logistic models, to fit the available experimental data sets. We used a direct algebraic approach generalized inverse matrix technique, rather than the traditional maximum likelihood estimation, to estimate the model parameters. The results show that both probit and logistic models fit the data sets well but the former is much better in terms of small least squares (numerical) errors. Meanwhile, the generalized inverse matrix technique achieved similar accuracy results to those from the maximum likelihood estimation, but is less time consuming and computationally demanding.
Abstract: In this paper, the difference between the Alternating
Direction Method (ADM) and the Non-Splitting Method (NSM) is
investigated, while both methods applied to the simulations for 2-D
multimaterial radiation diffusion issues. Although the ADM have the
same accuracy orders with the NSM on the uniform meshes, the
accuracy of ADM will decrease on the distorted meshes or the
boundary of domain. Numerical experiments are carried out to
confirm the theoretical predication.
Abstract: Numerical study is performed to investigate the
temperature distribution in an annular diffuser fitted with helical tape
hub. Different pitches (Y = 20 mm, and Y = 30 mm) for the helical
tape are studied with different heights (H = 20 mm, 22 mm, and 24
mm) to be compared. The geometry of the annular diffuser and the
inlet condition for both hub arrangements are kept constant. The
result obtains that using helical tape insert with different pitches and
different heights will force the temperature to distribute in a helical
direction; however the use of helical tape hub with height (H = 22
mm) for both pitches enhance the temperature distribution in a good
manner.
Abstract: The scroll pump belongs to the category of positive
displacement pump can be used for continuous pumping of gases at
low pressure apart from general vacuum application. The shape of
volume occupied by the gas moves and deforms continuously as the
spiral orbits. To capture flow features in such domain where mesh
deformation varies with time in a complicated manner, mesh less
solver was found to be very useful. Least Squares Kinetic Upwind
Method (LSKUM) is a kinetic theory based mesh free Euler solver
working on arbitrary distribution of points. Here upwind is enforced
in molecular level based on kinetic flux vector splitting scheme
(KFVS). In the present study we extended the LSKUM to moving
node viscous flow application. This new code LSKUM-NS-MN for
moving node viscous flow is validated for standard airfoil pitching
test case. Simulation performed for flow through scroll pump using
LSKUM-NS-MN code agrees well with the experimental pumping
speed data.
Abstract: For today-s and future wireless communications applications,
more and more data traffic has to be transmitted with
growing speed and quality demands. The analog front-end of any
mobile device has to cope with very hard specifications regardless
which transmission standard has to be supported. State-of-the-art
analog front-end implementations are reaching the limit of technical
feasibility. For that reason, alternative front-end architectures could
support a continuing development of mobile communications e.g.,
six-port-based front-ends [1], [2].
In this article we propose an analog front-end with high intermediate
frequency and which utilizes additive mixing instead
of multiplicative mixing. The system architecture is presented and
several spurious effects as well as their influence on the system
dimensioning are discussed. Furthermore, several issues concerning
the technical feasibility are provided and some simulation results
are discussed which show the principle functionality of the proposed
superposition heterodyne receiver.
Abstract: In this paper, for the understanding of the phytoplankton dynamics in marine ecosystem, a susceptible and an infected class of phytoplankton population is considered in spatiotemporal domain.
Here, the susceptible phytoplankton is growing logistically and the
growth of infected phytoplankton is due to the instantaneous Holling
type-II infection response function. The dynamics are studied in terms of the local and global stabilities for the system and further
explore the possibility of Hopf -bifurcation, taking the half saturation period as (i.e., ) the bifurcation parameter in temporal domain.
It is also observe that the reaction diffusion system exhibits spatiotemporal
chaos and pattern formation in phytoplankton dynamics,
which is particularly important role play for the spatially extended phytoplankton system. Also the effect of the diffusion coefficient
on the spatial system for both one and two dimensional case is obtained. Furthermore, we explore the higher-order stability analysis
of the spatial phytoplankton system for both linear and no-linear system. Finally, few numerical simulations are carried out for pattern
formation.