Abstract: In this paper, the Lennard -Jones potential is applied
to molecules of liquid argon as well as its vapor and platinum as solid
surface in order to perform a non-equilibrium molecular dynamics
simulation to study the microscopic aspects of liquid-vapor-solid
interactions. The channel is periodic in x and y directions and along z
direction it is bounded by atomic walls. It was found that density of
the liquids near the solid walls fluctuated greatly and that the
structure was more like a solid than a liquid. This indicates that the
interactions of solid and liquid molecules are very strong. The
resultant surface tension, liquid density and vapor density are found
to be well predicted when compared with the experimental data for
argon. Liquid and vapor densities were found to depend on the cutoff
radius which induces the use of P3M (particle-particle particle-mesh)
method which was implemented for evaluation of force and surface
tension.
Abstract: Research into the problem of classification of sonar signals has been taken up as a challenging task for the neural networks. This paper investigates the design of an optimal classifier using a Multi layer Perceptron Neural Network (MLP NN) and Support Vector Machines (SVM). Results obtained using sonar data sets suggest that SVM classifier perform well in comparison with well-known MLP NN classifier. An average classification accuracy of 91.974% is achieved with SVM classifier and 90.3609% with MLP NN classifier, on the test instances. The area under the Receiver Operating Characteristics (ROC) curve for the proposed SVM classifier on test data set is found as 0.981183, which is very close to unity and this clearly confirms the excellent quality of the proposed classifier. The SVM classifier employed in this paper is implemented using kernel Adatron algorithm is seen to be robust and relatively insensitive to the parameter initialization in comparison to MLP NN.
Abstract: Reliable information about tool temperature
distribution is of central importance in metal cutting. In this study,
tool-chip interface temperature was determined in cutting of ST37
steel workpiece by applying HSS as the cutting tool in dry turning.
Two different approaches were implemented for temperature
measuring: an embedded thermocouple (RTD) in to the cutting tool
and infrared (IR) camera. Comparisons are made between
experimental data and results of MSC.SuperForm and FLUENT
software.
An investigation of heat generation in cutting tool was performed
by varying cutting parameters at the stable cutting tool geometry and
results were saved in a computer; then the diagrams of tool
temperature vs. various cutting parameters were obtained. The
experimental results reveal that the main factors of the increasing
cutting temperature are cutting speed (V ), feed rate ( S ) and depth
of cut ( h ), respectively. It was also determined that simultaneously
change in cutting speed and feed rate has the maximum effect on
increasing cutting temperature.
Abstract: This paper gives a novel method for improving
classification performance for cancer classification with very few
microarray Gene expression data. The method employs classification
with individual gene ranking and gene subset ranking. For selection
and classification, the proposed method uses the same classifier. The
method is applied to three publicly available cancer gene expression
datasets from Lymphoma, Liver and Leukaemia datasets. Three
different classifiers namely Support vector machines-one against all
(SVM-OAA), K nearest neighbour (KNN) and Linear Discriminant
analysis (LDA) were tested and the results indicate the improvement
in performance of SVM-OAA classifier with satisfactory results on
all the three datasets when compared with the other two classifiers.
Abstract: This paper presents a novel approach to finding a
priori interesting regions in mammograms. In order to delineate those
regions of interest (ROI-s) in mammograms, which appear to be
prominent, a topographic representation called the iso-level contour
map consisting of iso-level contours at multiple intensity levels and
region segmentation based-thresholding have been proposed. The
simulation results indicate that the computed boundary gives the
detection rate of 99.5% accuracy.
Abstract: this paper presented a survey analysis subjected on
network bandwidth management from published papers referred in
IEEE Explorer database in three years from 2009 to 2011. Network
Bandwidth Management is discussed in today-s issues for computer
engineering applications and systems. Detailed comparison is
presented between published papers to look further in the IP based
network critical research area for network bandwidth management.
Important information such as the network focus area, a few
modeling in the IP Based Network and filtering or scheduling used in
the network applications layer is presented. Many researches on
bandwidth management have been done in the broad network area
but fewer are done in IP Based network specifically at the
applications network layer. A few researches has contributed new
scheme or enhanced modeling but still the issue of bandwidth
management still arise at the applications network layer. This survey
is taken as a basic research towards implementations of network
bandwidth management technique, new framework model and
scheduling scheme or algorithm in an IP Based network which will
focus in a control bandwidth mechanism in prioritizing the network
traffic the applications layer.
Abstract: A common way to elude the signature-based Network Intrusion Detection System is based upon changing a recognizable attack to an unrecognizable one via the IDS. For example, in order to evade sign accommodation with intrusion detection system markers, a hacker spilt the payload packet into many small pieces or hides them within messages. In this paper we try to model the main fragmentation attack and create a new module in the intrusion detection architecture system which recognizes the main fragmentation attacks through verification of integrity checking of TCP packet in order to prevent elusion of the system and also to announce the necessary alert to the system administrator.
Abstract: This paper proposes a declarative language for
knowledge representation (Ibn Rochd), and its environment of
exploitation (DeGSE). This DeGSE system was designed and
developed to facilitate Ibn Rochd writing applications. The system
was tested on several knowledge bases by ascending complexity,
culminating in a system for recognition of a plant or a tree, and
advisors to purchase a car, for pedagogical and academic guidance,
or for bank savings and credit. Finally, the limits of the language and
research perspectives are stated.
Abstract: The experimental study of position control of a light
weight and small size robotic finger during non-contact motion is
presented in this paper. The finger possesses fingertip pinching and
self adaptive grasping capabilities, and is made of a seven bar linkage
mechanism with a slider in the middle phalanx. The control system is
tested under the Proportional Integral Derivative (PID) control
algorithm and Recursive Least Square (RLS) based Feedback Error
Learning (FEL) control scheme to overcome the uncertainties present
in the plant. The experiments conducted in Matlab Simulink and xPC
Target environments show that the overall control strategy is efficient
in controlling the finger movement.
Abstract: To establish optical communication between any two
satellites, the transmitter satellite must track the beacon of the
receiver satellite and point the information optical beam in its
direction. Optical tracking and pointing systems for free space suffer
during tracking from high-amplitude vibration because of
background radiation from interstellar objects such as the Sun, Moon,
Earth, and stars in the tracking field of view or the mechanical
impact from satellite internal and external sources. The vibrations of
beam pointing increase the bit error rate and jam communication
between the two satellites. One way to overcome this problem is the
use of very small transmitter beam divergence angles of too narrow
divergence angle is that the transmitter beam may sometimes miss
the receiver satellite, due to pointing vibrations. In this paper we
propose the use of genetic algorithm to optimize the BER as function
of transmitter optics aperture.
Abstract: The aim of this paper is to present a comparative
study on two different methods for the evaluation of the equilibrium
point of a ship, core issue for designing an On Board Stability System
(OBSS) module that, starting from geometry information of a ship
hull, described by a discrete model in a standard format, and the
distribution of all weights onboard calculates the ship floating
conditions (in draught, heel and trim).
Abstract: Nowadays use of a new structural bracing system
called 'Knee Bracing System' have taken the specialists attention too
much. On the other hand nonlinear static analysis procedures in
estimate structures performance in earthquake time have taken
attention too much. One of these procedure is modal pushover
analysis (MPA) procedure. The accuracy of MPA procedure for
simple steel moment resisting frame has been verified and considered
in Chintanapakdee and Chopra-s article in 2003. Since the accuracy
of MPA procedure has not verified for semi-rigid steel frames with
knee bracing, we are going to get through with this matter in this
study. For this purpose, the selected structures are four frames with
different heights, 5 to 20 stories, will be designed according to AISC
criteria. Then MPA procedure is used for the same frames with
different rigidity percentiles of connections. The results of seismic
responses are compared with dynamic nonlinear response history
analysis as exact procedure and accuracy of MPA procedure is
evaluated. It seems that MPA procedure accuracy will come down by
reduction of the rigidity percentiles of semi-rigid connections.
Abstract: Recently, some convergent results of the generalized AOR iterative (GAOR) method for solving linear systems with strictly diagonally dominant matrices are presented in [Darvishi, M.T., Hessari, P.: On convergence of the generalized AOR method for linear systems with diagonally dominant cofficient matrices. Appl. Math. Comput. 176, 128-133 (2006)] and [Tian, G.X., Huang, T.Z., Cui, S.Y.: Convergence of generalized AOR iterative method for linear systems with strictly diagonally dominant cofficient matrices. J. Comp. Appl. Math. 213, 240-247 (2008)]. In this paper, we give the convergence of the GAOR method for linear systems with strictly doubly diagonally dominant matrix, which improves these corresponding results.
Abstract: This paper addresses one of the most important issues
have been considered in hybrid MTS/MTO production environments. To cope with the problem, a mathematical programming model is
applied from a tactical point of view. The model is converted to a fuzzy goal programming model, because a degree of uncertainty is involved in hybrid MTS/MTO context. Finally, application of the
proposed model in an industrial center is reported and the results prove the validity of the model.
Abstract: This research work takes a different approach in
the discussion of urban form impacts on transport planning and
auto dependency. Concentrated density represented by effective
density explains auto dependency better than the conventional
density and it is proved to be a realistic density representative for
the urban transportation analysis. Model analysis reveals that
effective density is influenced by the shopping accessibility
index as well as job density factor. It is also combined with the
job access variable to classify four levels of Transport Activity
Centers (TACs) in Okinawa, Japan. Trip attraction capacity and
levels of the newly classified TACs was found agreeable with the
amount of daily trips attracted to each center. The trip attraction
data set was drawn from a 2007 Okinawa personal trip survey.
This research suggests a planning methodology which guides
logical transport supply routes and concentrated local
development schemes.
Abstract: A parallel computational fluid dynamics code has been
developed for the study of aerodynamic heating problem in hypersonic
flows. The code employs the 3D Navier-Stokes equations as the basic
governing equations to simulate the laminar hypersonic flow. The cell
centered finite volume method based on structured grid is applied for
spatial discretization. The AUSMPW+ scheme is used for the inviscid
fluxes, and the MUSCL approach is used for higher order spatial
accuracy. The implicit LU-SGS scheme is applied for time integration
to accelerate the convergence of computations in steady flows. A
parallel programming method based on MPI is employed to shorten
the computing time. The validity of the code is demonstrated by
comparing the numerical calculation result with the experimental data
of a hypersonic flow field around a blunt body.
Abstract: This paper investigates the performance of a speech
recognizer in an interactive voice response system for various coded
speech signals, coded by using a vector quantization technique namely
Multi Switched Split Vector Quantization Technique. The process of
recognizing the coded output can be used in Voice banking application.
The recognition technique used for the recognition of the coded speech
signals is the Hidden Markov Model technique. The spectral distortion
performance, computational complexity, and memory requirements of
Multi Switched Split Vector Quantization Technique and the
performance of the speech recognizer at various bit rates have been
computed. From results it is found that the speech recognizer is
showing better performance at 24 bits/frame and it is found that the
percentage of recognition is being varied from 100% to 93.33% for
various bit rates.
Abstract: In order to reduce cost, increase quality, and for
timely supplying production systems has considerably taken the
advantages of supply chain management and these advantages are
also competitive. Selection of appropriate supplier has an important
role in improvement and efficiency of systems.
The models of supplier selection which have already been used by
researchers have considered selection one or more suppliers from
potential suppliers but in this paper selecting one supplier as partner
from one supplier that have minimum one period supplying to buyer
is considered.
This paper presents a conceptual model for partner selection and
application of Degree of Adoptive (DOA) model for final selection.
The attributes weight in this model is prepared through AHP
model. After making the descriptive model, determining the
attributes and measuring the parameters of the adaptive is examined
in an auto industry of Iran(Zagross Khodro co.) and results are
presented.
Abstract: Adaptive Genetic Algorithms extend the Standard Gas
to use dynamic procedures to apply evolutionary operators such as
crossover, mutation and selection. In this paper, we try to propose a
new adaptive genetic algorithm, which is based on the statistical
information of the population as a guideline to tune its crossover,
selection and mutation operators. This algorithms is called Statistical
Genetic Algorithm and is compared with traditional GA in some
benchmark problems.
Abstract: In this research work, investigations are carried out on
Continuous Wave (CW) Nd:YAG laser welding system after
preliminary experimentation to understand the influencing parameters
associated with laser welding of AISI 304. The experimental
procedure involves a series of laser welding trials on AISI 304
stainless steel sheets with various combinations of process parameters
like beam power, beam incident angle and beam incident angle. An
industrial 2 kW CW Nd:YAG laser system, available at Welding
Research Institute (WRI), BHEL Tiruchirappalli, is used for
conducting the welding trials for this research. After proper tuning of
laser beam, laser welding experiments are conducted on AISI 304
grade sheets to evaluate the influence of various input parameters on
weld bead geometry i.e. bead width (BW) and depth of penetration
(DOP). From the laser welding results, it is noticed that the beam
power and welding speed are the two influencing parameters on
depth and width of the bead. Three dimensional finite element
simulation of high density heat source have been performed for laser
welding technique using finite element code ANSYS for predicting
the temperature profile of laser beam heat source on AISI 304
stainless steel sheets. The temperature dependent material properties
for AISI 304 stainless steel are taken into account in the simulation,
which has a great influence in computing the temperature profiles.
The latent heat of fusion is considered by the thermal enthalpy of
material for calculation of phase transition problem. A Gaussian
distribution of heat flux using a moving heat source with a conical
shape is used for analyzing the temperature profiles. Experimental
and simulated values for weld bead profiles are analyzed for stainless
steel material for different beam power, welding speed and beam
incident angle. The results obtained from the simulation are
compared with those from the experimental data and it is observed
that the results of numerical analysis (FEM) are in good agreement
with experimental results, with an overall percentage of error
estimated to be within ±6%.