Analysis of Failure Pressures of Composite Cylinders with a Polymer Liner of Type IV CNG Vessels

The present study deals with the analysis of the cylindrical part of a CNG storage vessel, combining a plastic liner and an over wrapped filament wound composite. Three kind of polymer are used in the present analysis: High density Polyethylene HDPE, Light low density Polyethylene LLDPE and finally blend of LLDPE/HDPE. The effect of the mechanical properties on the behavior of type IV vessel may be then investigated. In the present paper, the effect of the order of the circumferential winding on the stacking sequence may be then investigated. Based on mechanical considerations, the present model provides an exact solution for stresses and deformations on the cylindrical section of the vessel under thermo-mechanical static loading. The result show a good behavior of HDPE liner compared to the other plastic materials. The presence of circumferential winding angle in the stacking improves the rigidity of vessel by improving the burst pressure.





References:
[1] Hocine A., Chapelle D., Boubakar L., Benamar A., Bezazi A.: Analysis
of intermetallic swelling on the behavior of a hybrid solution for
compressed hydrogen storage: Part IÔÇö
Analytical modeling. International Journal of Materials and design 31
(2010) 2435-2443.
[2] E.S. Barboza Neto, M. Chludzinski, P.B. Roese, J.S.O. Fonseca, S.C.
Amico, C.A. Ferreira. Experimental and numerical analysis of a
LLDPE/HDPE liner for a composite pressure vessel - Polymer Testing
30 (2011) 693-700.
[3] Hocine A., Chapelle D., Boubakar L., Benamar A.,
Bezazi A. Experimental and analytical investigation of the cylindrical
part of a metallic vessel reinforced by filament winding while submitted
to internal pressure. International Journal of Pressure Vessels and
Piping 86 (2009) 649-655.
[4] Lifshitz J.M., Dayan H. : Filament-wound pressure vessel with thick
metal liner, Composite Structures, Vol 32, pp. 313-323, 1995.
[5] Kabir M. Z. : Finite element analysis of composite pressure vessels with
a load sharing metallic liner, Composite Structures, Vol. 49, pp. 247-
255, 2000.
[6] Vasiliev Vv., Krinakov A.A., Razin A.F. New generation of filamentwound
composite pressure vessels for commercial applications,
Composite Structure, Vol. 62, p. 449-459, 2003.
[7] R.K. Ahluwalia, T.Q. Hua, J.K. Peng. On-board and Off-board
performance of hydrogen storage options for light-duty vehicle.
International journal of hydrogen energy 37 (2012) 2891-2910.
[8] Brandt J, Drechsler K, Richter, H. The use of high-performance
thermoplastic composites for structural aerospace applications. In: 9th
international conference on composite materials (ICCM-9), vol. 6.
Madrid, Spain; 1993. p. 143-150.
[9] Velosa, J.P. Nunes, P.J. Antunes, J.F. Silva, A.T. Marques.
Development of a new generation of filament wound composite pressure
cylinders - J.C. - Composites Science and Technology 69 (2009) 1348-
1353.
[10] Jinyang Zheng, Kesheng Oua, Haiyan Bie, Ping Xu, Yongzhi Zhao,
Xianxin Liu, Yuntang He. Heat transfer analysis of high-pressure
hydrogen storage tanks subjected to localized fire. International journal
of hydrogen energy 37 (2012) 13125 -13131
[11] Jong-Il Weon. Effects of thermal ageing on mechanical and thermal
behaviors of linear low density polyethylene pipe. Polymer Degradation
and Stability. Volume 95, Issue 1, January 2010, Pages 14-20.
[12] Ghouaoula A., Hocine A., Chapelle D., Kara Achira F., Boubakar
M.L. Analytical damage prediction in the composite part of a type III
hydrogen storage vessel. Mechanics of Composite Materials, Vol. 48,
No. 1, March, 2012.
[13] Ali Durmus,1 Ahmet Kas┬©Go┬¿ Z,1 And Christopher W. Macosko2.
Mechanical Properties of Linear Low-density Polyethylene
(LLDPE)/clay Nanocomposites. Journal of Macromolecular Sciencew,