Abstract: This study is to investigate the electroencephalogram (EEG) differences generated from a normal and Alzheimer-s disease (AD) sources. We also investigate the effects of brain tissue distortions due to AD on EEG. We develop a realistic head model from T1 weighted magnetic resonance imaging (MRI) using finite element method (FEM) for normal source (somatosensory cortex (SC) in parietal lobe) and AD sources (right amygdala (RA) and left amygdala (LA) in medial temporal lobe). Then, we compare the AD sourced EEGs to the SC sourced EEG for studying the nature of potential changes due to sources and 5% to 20% brain tissue distortions. We find an average of 0.15 magnification errors produced by AD sourced EEGs. Different brain tissue distortion models also generate the maximum 0.07 magnification. EEGs obtained from AD sources and different brain tissue distortion levels vary scalp potentials from normal source, and the electrodes residing in parietal and temporal lobes are more sensitive than other electrodes for AD sourced EEG.
Abstract: A two dimensional three segments coupled pendulum system that mathematically models human arm configuration was developed along with constructing and solving the equations of motions for this model using the energy (work) based approach of Lagrange. The equations of motion of the model were solved iteratively both as an initial value problem and as a two point boundary value problem. In the initial value problem solutions, both the initial system configuration (segment angles) and initial system velocity (segment angular velocities) were used as inputs, whereas, in the two point boundary value problem solutions initial and final configurations and time were used as inputs to solve for the trajectory of motion. The results suggest that the model solutions are sensitive to small changes in the dynamic forces applied to the system as well as to the initial and boundary conditions used. To overcome the system sensitivity a new approach is suggested.
Abstract: In the past decade, the development of microstrip
sensor application has evolved tremendously. Although cut and trial
method was adopted to develop microstrip sensing applications in the
past, Computer-Aided-Design (CAD) is a more effective as it ensures
less time is consumed and cost saving is achieved in developing
microstrip sensing applications. Therefore microstrip sensing
applications has gained popularity as an effective tool adopted in
continuous sensing of moisture content particularly in products that is
administered mainly by liquid content. In this research, the Cole-Cole
representation of reactive relaxation is applied to assess the
performance of the microstrip sensor devices. The microstrip sensor
application is an effective tool suitable for sensing the moisture
content of dielectric material. Analogous to dielectric relaxation
consideration of Cole-Cole diagrams as applied to dielectric
materials, a “reactive relaxation concept” concept is introduced to
represent the frequency-dependent and moisture content
characteristics of microstrip sensor devices.
Abstract: This paper presents the applications of computational intelligence techniques to economic load dispatch problems. The fuel cost equation of a thermal plant is generally expressed as continuous quadratic equation. In real situations the fuel cost equations can be discontinuous. In view of the above, both continuous and discontinuous fuel cost equations are considered in the present paper. First, genetic algorithm optimization technique is applied to a 6- generator 26-bus test system having continuous fuel cost equations. Results are compared to conventional quadratic programming method to show the superiority of the proposed computational intelligence technique. Further, a 10-generator system each with three fuel options distributed in three areas is considered and particle swarm optimization algorithm is employed to minimize the cost of generation. To show the superiority of the proposed approach, the results are compared with other published methods.
Abstract: In this paper, delay-dependent stability analysis for
neutral type neural networks with uncertain paramters and
time-varying delay is studied. By constructing new
Lyapunov-Krasovskii functional and dividing the delay interval into
multiple segments, a novel sufficient condition is established to
guarantee the globally asymptotically stability of the considered
system. Finally, a numerical example is provided to illustrate the
usefulness of the proposed main results.
Abstract: The composition, vapour pressure, and heat capacity
of nine biodiesel fuels from different sources were measured. The
vapour pressure of the biodiesel fuels is modeled assuming an ideal
liquid phase of the fatty acid methyl esters constituting the fuel. New
methodologies to calculate the vapour pressure and ideal gas and
liquid heat capacities of the biodiesel fuel constituents are proposed.
Two alternative optimization scenarios are evaluated: 1) vapour
pressure only; 2) vapour pressure constrained with liquid heat
capacity. Without physical constraints, significant errors in liquid
heat capacity predictions were found whereas the constrained
correlation accurately fit both vapour pressure and liquid heat
capacity.
Abstract: In the present paper, we obtain a sandwich-type theorem.
As applications of our main result, we discuss the univalence
and starlikeness of analytic functions in terms of certain differential
subordinations and differential inequalities.
Abstract: In order to define a new model of Tunisian foot
sizes and for building the most comfortable shoes, Tunisian
industrialists must be able to offer for their customers products able
to put on and adjust the majority of the target population concerned.
Moreover, the use of models of shoes, mainly from others
country, causes a mismatch between the foot and comfort of the
Tunisian shoes.
But every foot is unique; these models become uncomfortable for
the Tunisian foot. We have a set of measures produced from a
3D scan of the feet of a diverse population (women, men ...) and we
try to analyze this data to define a model of foot specific to the
Tunisian footwear design.
In this paper we propose tow new approaches to modeling a new
foot sizes model. We used, indeed, the neural networks, and specially
the Kohonen network.
Next, we combine neural networks with the concept of half-foot
size to improve the models already found. Finally, it was necessary to
compare the results obtained by applying each approach and we
decide what-s the best approach that give us the most model of foot
improving more comfortable shoes.
Abstract: A theory for optimal filtering of infinite sets of random
signals is presented. There are several new distinctive features of the
proposed approach. First, a single optimal filter for processing any
signal from a given infinite signal set is provided. Second, the filter is
presented in the special form of a sum with p terms where each term
is represented as a combination of three operations. Each operation
is a special stage of the filtering aimed at facilitating the associated
numerical work. Third, an iterative scheme is implemented into the
filter structure to provide an improvement in the filter performance at
each step of the scheme. The final step of the scheme concerns signal
compression and decompression. This step is based on the solution of
a new rank-constrained matrix approximation problem. The solution
to the matrix problem is described in this paper. A rigorous error
analysis is given for the new filter.
Abstract: Longitudinal data typically have the characteristics of
changes over time, nonlinear growth patterns, between-subjects
variability, and the within errors exhibiting heteroscedasticity and
dependence. The data exploration is more complicated than that of
cross-sectional data. The purpose of this paper is to organize/integrate
of various visual-graphical techniques to explore longitudinal data.
From the application of the proposed methods, investigators can
answer the research questions include characterizing or describing the
growth patterns at both group and individual level, identifying the time
points where important changes occur and unusual subjects, selecting
suitable statistical models, and suggesting possible within-error
variance.
Abstract: Students often adopt routine practicing as learning
strategy for mathematics. The reason is they are often bound and
trained to solving conventional-typed questions in Mathematics in
high school. This will be problematic if students further consolidate
this practice in university. Therefore, the Department of Mathematics
emphasized and integrated the Discovery-enriched approach in the
undergraduate curriculum. This paper presents the details of
implementing the Discovery-enriched Curriculum by providing
adequate platform for project-learning, expertise for guidance and
internship opportunities for students majoring in Mathematics. The
Department also provided project-learning opportunities to
mathematics courses targeted for students majoring in other science or
engineering disciplines. The outcome is promising: the research
ability and problem solving skills of students are enhanced.
Abstract: The people are differed by their capabilities, skills and mental agilities. The evolution of human from childhood when they are completely dependent up to adultness the time they gradually set the dependency free is too complicated, by considering they have all started from almost one point but some become cleverer and some less. The main control command of a cybernetic hand should be posted by remaining healthy organs of disabled Person. These commands can be from several channels, which their recording and detecting are different and need complicated study. In this research, we suppose that, this stage has been done or in the other words, the command has been already sent and detected. So the main goal is to control a long hand, upper elbow hand missing, by an interest angle define by disabled. It means that, the system input is the position desired by disables and the output is the elbow-joint angle variation. Therefore the goal is a suitable control design based on neural network theory in order to meet the given mapping.
Abstract: In this paper, we were introduces a skin detection
method using a histogram approximation based on the mean shift
algorithm. The proposed method applies the mean shift procedure to a
histogram of a skin map of the input image, generated by comparison
with standard skin colors in the CbCr color space, and divides the
background from the skin region by selecting the maximum value
according to brightness level. The proposed method detects the skin
region using the mean shift procedure to determine a maximum value
that becomes the dividing point, rather than using a manually selected
threshold value, as in existing techniques. Even when skin color is
contaminated by illumination, the procedure can accurately segment
the skin region and the background region. The proposed method may
be useful in detecting facial regions as a pretreatment for face
recognition in various types of illumination.
Abstract: This paper contributes to the field of Environmental
Awareness Training (EAT) evaluation in terms of military activities.
Environmental management of military activities is a growing concern
for defence forces worldwide and the importance of EAT is becoming
widely recognized. As one of Australia-s largest landowners, the
Australian Defence Force (ADF) is extremely mindful of its duty as a
joint environmental manager. It has an integrated Environmental
Management System (EMS) to assist environmental management and
EAT is an essential part of the ADF EMS model. This paper examines
how EAT was conducted during the exercise Talisman Saber in 2009
(TS09) and evaluates its effectiveness, using Shoalwater Bay Training
Area (SWBTA), one of the most significant military training areas and
a significant protected area in Australia, as a case study. A
questionnaire survey conducted showed, overall, that EAT was
effective from the perspective of a sample of participants.
Recommendations are made for the ADF to refine EAT for future
exercises.
Abstract: In this paper, an extended study is performed on the
effect of different factors on the quality of vector data based on a
previous study. In the noise factor, one kind of noise that appears in
document images namely Gaussian noise is studied while the previous
study involved only salt-and-pepper noise. High and low levels of
noise are studied. For the noise cleaning methods, algorithms that were
not covered in the previous study are used namely Median filters and
its variants. For the vectorization factor, one of the best available
commercial raster to vector software namely VPstudio is used to
convert raster images into vector format. The performance of line
detection will be judged based on objective performance evaluation
method. The output of the performance evaluation is then analyzed
statistically to highlight the factors that affect vector quality.
Abstract: Based on an analysis of the mechanism of degradation of optical characteristics of the ZnO-pigmented white paint by electron irradiation, a model of single molecular color centers is built. An equation that explains the relationship between the changes of variation of the ZnO-pigmented white paint-s spectrum absorptance and electron fluence is derived. The uncertain parameters in the equation can be calculated using the curve fitting by experimental data. The result indicates that the model can be applied to predict the degradation of optical characteristics of ZnO-pigmented white paint by electron radiation.
Abstract: We present a method to create special domain
collections from news sites. The method only requires a single
sample article as a seed. No prior corpus statistics are needed and the
method is applicable to multiple languages. We examine various
similarity measures and the creation of document collections for
English and Japanese. The main contributions are as follows. First,
the algorithm can build special domain collections from as little as
one sample document. Second, unlike other algorithms it does not
require a second “general" corpus to compute statistics. Third, in our
testing the algorithm outperformed others in creating collections
made up of highly relevant articles.
Abstract: Cloud computing is the innovative and leading
information technology model for enabling convenient, on-demand
network access to a shared pool of configurable computing resources
that can be rapidly provisioned and released with minimal
management effort. This paper presents our development on enabling
an individual user's desktop in a virtualized environment, which is
stored on a remote virtual machine rather than locally. We present the
initial work on the integration of virtual desktop and application
sharing with virtualization technology. Given the development of
remote desktop virtualization, this proposed effort has the potential to
positively provide an efficient, resilience and elastic environment for
online cloud service. Users no longer need to burden the cost of
software licenses and platform maintenances. Moreover, this
development also helps boost user productivity by promoting a
flexible model that lets users access their desktop environments from
virtually anywhere.
Abstract: A scaffold is necessary for tooth regeneration because of its three-dimensional geometry. For restoration of defect, it is necessary for the scaffold to be prepared in the shape of the defect. Sponges made from polyvinyl alcohol with formalin cross-linking (PVF sponge) have been used for scaffolds for bone formation in vivo. To induce osteogenesis within the sponge, methods of growing rat bone marrow cells (rBMCs) among the fiber structures in the sponge might be considered. Storage of rBMCs among the fibers in the sponge coated with dextran (10 kDa) was tried. After seeding of rBMCs to PVF sponge immersed in dextran solution at 2 g/dl concentration, osteogenesis was recognized in subcutaneously implanted PVF sponge as a scaffold in vivo. The level of osteocalcin was 25.28±5.71 ng/scaffold and that of Ca was 129.20±19.69 µg/scaffold. These values were significantly higher than those in sponges without dextran coating (p
Abstract: Recently, Genetic Algorithms (GA) and Differential
Evolution (DE) algorithm technique have attracted considerable
attention among various modern heuristic optimization techniques.
Since the two approaches are supposed to find a solution to a given
objective function but employ different strategies and computational
effort, it is appropriate to compare their performance. This paper
presents the application and performance comparison of DE and GA
optimization techniques, for flexible ac transmission system
(FACTS)-based controller design. The design objective is to enhance
the power system stability. The design problem of the FACTS-based
controller is formulated as an optimization problem and both the PSO
and GA optimization techniques are employed to search for optimal
controller parameters. The performance of both optimization
techniques has been compared. Further, the optimized controllers are
tested on a weekly connected power system subjected to different
disturbances, and their performance is compared with the
conventional power system stabilizer (CPSS). The eigenvalue
analysis and non-linear simulation results are presented and
compared to show the effectiveness of both the techniques in
designing a FACTS-based controller, to enhance power system
stability.