Abstract: Innovation is being view from four areas of
innovation, product, service, technology, and marketing. Whereas
customer loyalty is composed of customer expectation, perceived
quality, perceived value, corporate image, customer satisfaction,
customer trust/confidence, customer commitment, customer
complaint, and customer loyalty. This study aimed to investigate the
influence of innovation factors to customer loyalty to GSM in the
telecom companies where use of products and services. Structural
Equation Modeling (SEM) using to analyze innovation factors. It was
found the factor of innovation have significant influence on customer
loyalty.
Abstract: An automatic speech recognition system for the
formal Arabic language is needed. The Quran is the most formal
spoken book in Arabic, it is spoken all over the world. In this
research, an automatic speech recognizer for Quranic based speakerindependent
was developed and tested. The system was developed
based on the tri-phone Hidden Markov Model and Maximum
Likelihood Linear Regression (MLLR). The MLLR computes a set
of transformations which reduces the mismatch between an initial
model set and the adaptation data. It uses the regression class tree, as
well as, estimates a set of linear transformations for the mean and
variance parameters of a Gaussian mixture HMM system. The 30th
Chapter of the Quran, with five of the most famous readers of the
Quran, was used for the training and testing of the data. The chapter
includes about 2000 distinct words. The advantages of using the
Quranic verses as the database in this developed recognizer are the
uniqueness of the words and the high level of orderliness between
verses. The level of accuracy from the tested data ranged 68 to 85%.
Abstract: The flow field over a three dimensional pole barn
characterized by a cylindrical roof has been numerically investigated.
Wind pressure and viscous loads acting on the agricultural building
have been analyzed for several incoming wind directions, so as to
evaluate the most critical load condition on the structure. A constant
wind velocity profile, based on the maximum reference wind speed in
the building site (peak gust speed worked out for 50 years return
period) and on the local roughness coefficient, has been simulated.
In order to contemplate also the hazard due to potential air
wedging between the stored hay and the lower part of the ceiling, the
effect of a partial filling of the barn has been investigated.
The distribution of wind-induced loads on the structure have been
determined, allowing a numerical quantification of the effect of wind
direction on the induced stresses acting on a hemicylindrical roof.
Abstract: True integration of multimedia services over wired or
wireless networks increase the productivity and effectiveness in
today-s networks. IP Multimedia Subsystems are Next Generation
Network architecture to provide the multimedia services over fixed
or mobile networks. This paper proposes an extended SIP-based QoS
Management architecture for IMS services over underlying IP access
networks. To guarantee the end-to-end QoS for IMS services in
interconnection backbone, SIP based proxy Modules are introduced
to support the QoS provisioning and to reduce the handoff disruption
time over IP access networks. In our approach these SIP Modules
implement the combination of Diffserv and MPLS QoS mechanisms
to assure the guaranteed QoS for real-time multimedia services. To
guarantee QoS over access networks, SIP Modules make QoS
resource reservations in advance to provide best QoS to IMS users
over heterogeneous networks. To obtain more reliable multimedia
services, our approach allows the use of SCTP protocol over SIP
instead of UDP due to its multi-streaming feature. This architecture
enables QoS provisioning for IMS roaming users to differentiate IMS
network from other common IP networks for transmission of realtime
multimedia services. To validate our approach simulation
models are developed on short scale basis. The results show that our
approach yields comparable performance for efficient delivery of
IMS services over heterogeneous IP access networks.
Abstract: This study presents a mathematical modeling approach to the planning of HIV therapies on an individual basis. The model replicates clinical data from typical-progressors to AIDS for all stages of the disease with good agreement. Clinical data from rapid-progressors and long-term non-progressors is also matched by estimation of immune system parameters only. The ability of the model to reproduce these phenomena validates the formulation, a fact which is exploited in the investigation of effective therapies. The therapy investigation suggests that, unlike continuous therapy, structured treatment interruptions (STIs) are able to control the increase in both the drug-sensitive and drug-resistant virus population and, hence, prevent the ultimate progression from HIV to AIDS. The optimization results further suggest that even patients characterised by the same progression type can respond very differently to the same treatment and that the latter should be designed on a case-by-case basis. Such a methodology is presented here.
Abstract: Testing is an activity that is required both in the
development and maintenance of the software development life cycle
in which Integration Testing is an important activity. Integration
testing is based on the specification and functionality of the software
and thus could be called black-box testing technique. The purpose of
integration testing is testing integration between software
components. In function or system testing, the concern is with overall
behavior and whether the software meets its functional specifications
or performance characteristics or how well the software and
hardware work together. This explains the importance and necessity
of IT for which the emphasis is on interactions between modules and
their interfaces. Software errors should be discovered early during
IT to reduce the costs of correction. This paper introduces a new type
of integration error, presenting an overview of Integration Testing
techniques with comparison of each technique and also identifying
which technique detects what type of error.
Abstract: In this study, an investigation over digestive diseases has been done in which the sound acts as a detector medium. Pursue to the preprocessing the extracted signal in cepstrum domain is registered. After classification of digestive diseases, the system selects random samples based on their features and generates the interest nonstationary, long-term signals via inverse transform in cepstral domain which is presented in digital and sonic form as the output. This structure is updatable or on the other word, by receiving a new signal the corresponding disease classification is updated in the feature domain.
Abstract: This paper considers the development of a two-point
predictor-corrector block method for solving delay differential
equations. The formulae are represented in divided difference form
and the algorithm is implemented in variable stepsize variable order
technique. The block method produces two new values at a single
integration step. Numerical results are compared with existing
methods and it is evident that the block method performs very well.
Stability regions of the block method are also investigated.
Abstract: Information and Communication Technologies (ICT) in mathematical education is a very active field of research and innovation, where learning is understood to be meaningful and grasping multiple linked representation rather than rote memorization, a great amount of literature offering a wide range of theories, learning approaches, methodologies and interpretations, are generally stressing the potentialities for teaching and learning using ICT. Despite the utilization of new learning approaches with ICT, students experience difficulties in learning concepts relevant to understanding mathematics, much remains unclear about the relationship between the computer environment, the activities it might support, and the knowledge that might emerge from such activities. Many questions that might arise in this regard: to what extent does the use of ICT help students in the process of understanding and solving tasks or problems? Is it possible to identify what aspects or features of students' mathematical learning can be enhanced by the use of technology? This paper will highlight the interest of the integration of information and communication technologies (ICT) into the teaching and learning of mathematics (quadratic functions), it aims to investigate the effect of four instructional methods on students- mathematical understanding and problem solving. Quantitative and qualitative methods are used to report about 43 students in middle school. Results showed that mathematical thinking and problem solving evolves as students engage with ICT activities and learn cooperatively.
Abstract: Recently, a model multi-agent e-commerce system based on mobile buyer agents and transfer of strategy modules was proposed. In this paper a different approach to code mobility is introduced, where agent mobility is replaced by local agent creation supplemented by similar code mobility as in the original proposal. UML diagrams of agents involved in the new approach to mobility and the augmented system activity diagram are presented and discussed.
Abstract: This was the first document revealing the
investigation of protein hydrolysate production optimization from J.
curcas cake. Proximate analysis of raw material showed 18.98%
protein, 5.31% ash, 8.52% moisture and 12.18% lipid. The
appropriate protein hydrolysate production process began with
grinding the J. curcas cake into small pieces. Then it was suspended
in 2.5% sodium hydroxide solution with ratio between solution/ J.
curcas cake at 80:1 (v/w). The hydrolysis reaction was controlled at
temperature 50 °C in water bath for 45 minutes. After that, the
supernatant (protein hydrolysate) was separated using centrifuge at
8000g for 30 minutes. The maximum yield of resulting protein
hydrolysate was 73.27 % with 7.34% moisture, 71.69% total protein,
7.12% lipid, 2.49% ash. The product was also capable of well
dissolving in water.
Abstract: The presence of toxic heavy metals in industrial
effluents is one of the serious threats to the environment. Heavy
metals such as Cadmium, Chromium, Lead, Nickel, Zinc, Mercury,
Copper, Arsenic are found in the effluents of industries such as
foundries, electroplating, petrochemical, battery manufacturing,
tanneries, fertilizer, dying, textiles, metallurgical and metal finishing.
Tremendous increase of industrial copper usage and its presence in
industrial effluents has lead to a growing concern about the fate and
effects of Copper in the environment. Percolation of industrial
effluents through soils leads to contamination of ground water and
soils. The transport of heavy metals and their diffusion into the soils
has therefore, drawn the attention of the researchers.
In this study, an attempt has been made to delineate the
mechanisms of transport and fate of copper in terrestrial
environment. Column studies were conducted using perplex glass
square column of dimension side 15 cm and 1.35 m long. The soil
samples were collected from a natural drain near Mohali (India). The
soil was characterized to be poorly graded sandy loam. The soil was
compacted to the field dry density level of about 1.6 g/cm3. Break
through curves for different depths of the column were plotted. The
results of the column study indicated that the copper has high
tendency to flow in the soils and fewer tendencies to get absorbed on
the soil particles. The t1/2 estimates obtained from the studies can be
used for design copper laden wastewater disposal systems.
Abstract: Residue Number System (RNS) is a modular representation and is proved to be an instrumental tool in many digital signal processing (DSP) applications which require high-speed computations. RNS is an integer and non weighted number system; it can support parallel, carry-free, high-speed and low power arithmetic. A very interesting correspondence exists between the concepts of Multiple Valued Logic (MVL) and Residue Number Arithmetic. If the number of levels used to represent MVL signals is chosen to be consistent with the moduli which create the finite rings in the RNS, MVL becomes a very natural representation for the RNS. There are two concerns related to the application of this Number System: reaching the most possible speed and the largest dynamic range. There is a conflict when one wants to resolve both these problem. That is augmenting the dynamic range results in reducing the speed in the same time. For achieving the most performance a method is considere named “One-Hot Residue Number System" in this implementation the propagation is only equal to one transistor delay. The problem with this method is the huge increase in the number of transistors they are increased in order m2 . In real application this is practically impossible. In this paper combining the Multiple Valued Logic and One-Hot Residue Number System we represent a new method to resolve both of these two problems. In this paper we represent a novel design of an OHRNS-based adder circuit. This circuit is useable for Multiple Valued Logic moduli, in comparison to other RNS design; this circuit has considerably improved the number of transistors and power consumption.
Abstract: Cloud Computing is a new technology that helps us to
use the Cloud for compliance our computation needs. Cloud refers to a scalable network of computers that work together like Internet. An
important element in Cloud Computing is that we shift processing, managing, storing and implementing our data from, locality into the
Cloud; So it helps us to improve the efficiency. Because of it is new
technology, it has both advantages and disadvantages that are
scrutinized in this article. Then some vanguards of this technology
are studied. Afterwards we find out that Cloud Computing will have
important roles in our tomorrow life!
Abstract: Although backpropagation ANNs generally predict
better than decision trees do for pattern classification problems, they
are often regarded as black boxes, i.e., their predictions cannot be
explained as those of decision trees. In many applications, it is
desirable to extract knowledge from trained ANNs for the users to
gain a better understanding of how the networks solve the problems.
A new rule extraction algorithm, called rule extraction from artificial
neural networks (REANN) is proposed and implemented to extract
symbolic rules from ANNs. A standard three-layer feedforward ANN
is the basis of the algorithm. A four-phase training algorithm is
proposed for backpropagation learning. Explicitness of the extracted
rules is supported by comparing them to the symbolic rules generated
by other methods. Extracted rules are comparable with other methods
in terms of number of rules, average number of conditions for a rule,
and predictive accuracy. Extensive experimental studies on several
benchmarks classification problems, such as breast cancer, iris,
diabetes, and season classification problems, demonstrate the
effectiveness of the proposed approach with good generalization
ability.
Abstract: The feature extraction method(s) used to recognize
hand-printed characters play an important role in ICR applications.
In order to achieve high recognition rate for a recognition system, the
choice of a feature that suits for the given script is certainly an
important task. Even if a new feature required to be designed for a
given script, it is essential to know the recognition ability of the
existing features for that script. Devanagari script is being used in
various Indian languages besides Hindi the mother tongue of majority
of Indians. This research examines a variety of feature extraction
approaches, which have been used in various ICR/OCR applications,
in context to Devanagari hand-printed script. The study is conducted
theoretically and experimentally on more that 10 feature extraction
methods. The various feature extraction methods have been evaluated
on Devanagari hand-printed database comprising more than 25000
characters belonging to 43 alphabets. The recognition ability of the
features have been evaluated using three classifiers i.e. k-NN, MLP
and SVM.
Abstract: In this paper we discuss the problems of the long-term management policy of Lake Peipsi and the roles of natural and anthropogenic factors in the ecological state of the lake. The reduction of the pollution during the last 15 years could not give significant changes of the chemical composition of the water, what implicates the essential role that natural factors have on the ecological state of lake. One of the most important factors having impact on the hydrochemical cycles and ecological state is the hydrological regime which is clearly expressed in L. Peipsi. The absence on clear interrelations of climate cycles and nutrients suggest that complex abiotic and biotic interactions, which take place in the lake ecosystem, plays a significant role in the matter circulation mechanism within lake.
Abstract: During the last couple of years, the degree of dependence on IT systems has reached a dimension nobody imagined to be possible 10 years ago. The increased usage of mobile devices (e.g., smart phones), wireless sensor networks and embedded devices (Internet of Things) are only some examples of the dependency of modern societies on cyber space. At the same time, the complexity of IT applications, e.g., because of the increasing use of cloud computing, is rising continuously. Along with this, the threats to IT security have increased both quantitatively and qualitatively, as recent examples like STUXNET or the supposed cyber attack on Illinois water system are proofing impressively. Once isolated control systems are nowadays often publicly available - a fact that has never been intended by the developers. Threats to IT systems don’t care about areas of responsibility. Especially with regard to Cyber Warfare, IT threats are no longer limited to company or industry boundaries, administrative jurisdictions or state boundaries. One of the important countermeasures is increased cooperation among the participants especially in the field of Cyber Defence. Besides political and legal challenges, there are technical ones as well. A better, at least partially automated exchange of information is essential to (i) enable sophisticated situational awareness and to (ii) counter the attacker in a coordinated way. Therefore, this publication performs an evaluation of state of the art Intrusion Detection Message Exchange protocols in order to guarantee a secure information exchange between different entities.
Abstract: As the majority of faults are found in a few of its
modules so there is a need to investigate the modules that are
affected severely as compared to other modules and proper
maintenance need to be done in time especially for the critical
applications. As, Neural networks, which have been already applied
in software engineering applications to build reliability growth
models predict the gross change or reusability metrics. Neural
networks are non-linear sophisticated modeling techniques that are
able to model complex functions. Neural network techniques are
used when exact nature of input and outputs is not known. A key
feature is that they learn the relationship between input and output
through training. In this present work, various Neural Network Based
techniques are explored and comparative analysis is performed for
the prediction of level of need of maintenance by predicting level
severity of faults present in NASA-s public domain defect dataset.
The comparison of different algorithms is made on the basis of Mean
Absolute Error, Root Mean Square Error and Accuracy Values. It is
concluded that Generalized Regression Networks is the best
algorithm for classification of the software components into different
level of severity of impact of the faults. The algorithm can be used to
develop model that can be used for identifying modules that are
heavily affected by the faults.
Abstract: Achievement motivation is believed to promote
giftedness attracting people to invest in many programs to adopt
gifted students providing them with challenging activities.
Intellectual giftedness is founded on the fluid intelligence and
extends to more specific abilities through the growth and inputs from
the achievement motivation. Acknowledging the roles played by the
motivation in the development of giftedness leads to an effective
nurturing of gifted individuals. However, no study has investigated
the direct and indirect effects of the achievement motivation and
fluid intelligence on intellectual giftedness. Thus, this study
investigated the contribution of motivation factors to giftedness
development by conducting tests of fluid intelligence using Cattell
Culture Fair Test (CCFT) and analytical abilities using culture
reduced test items covering problem solving, pattern recognition,
audio-logic, audio-matrices, and artificial language, and self report
questionnaire for the motivational factors. A number of 180 highscoring
students were selected using CCFT from a leading university
in Malaysia. Structural equation modeling was employed using Amos
V.16 to determine the direct and indirect effects of achievement
motivation factors (self confidence, success, perseverance,
competition, autonomy, responsibility, ambition, and locus of
control) on the intellectual giftedness. The findings showed that the
hypothesized model fitted the data, supporting the model postulates
and showed significant and strong direct and indirect effects of the
motivation and fluid intelligence on the intellectual giftedness.