Abstract: An important official knowledge in each country is to
have a comprehensive knowledge about markets of each group of
products. Drink markets are one the most important markets of each
country as a sub-group of nourishment markets. This paper is going
to study these markets in Iran. To do so, first, two drink products are
selected as pilot, including milk and concentrate. Then, for each
product, two groups of information are estimated for the last five
years, including 1) total consumption (demand) and 2) total
production. Finally, the two groups of productions are compared
statistically by means of two statistical tests called t test and Mann-
Whitney test. The implemented Different related tables and figures
are also illustrated to show the method more explicitly.
Abstract: The performance of ground to deep space optical
communication systems is degraded by distortion of the beam as it
propagates through the turbulent atmosphere. Turbulence causes
fluctuations in the intensity of the received signal which ultimately
affects the acquisition time required to acquire and locate the spaceborne
target using narrow laser beam. In this paper, performance of
free-space optical (FSO) communication system in atmospheric
turbulence has been analyzed in terms of acquisition time for
coherent and non-coherent modulation schemes. Numerical results
presented in graphical and tabular forms show that the acquisition
time increases with the increase in turbulence level. This is true for
both schemes. The BPSK has lowest acquisition time among all
schemes. In non-coherent schemes, M-PPM performs better than the
other schemes. With the increase in M, acquisition time becomes
lower, but at the cost of increase in system complexity.
Abstract: In space during functioning, a satellite will be heated
up due to the behavior of its components such as power electronics.
In order to prevent problems in the satellite, this heat has to be
released in space thanks to the cooling system. This system consists
of a loop heat pipe (LHP), in which a fluid streams through an
evaporator and a condenser. In the evaporator, the fluid captures the
heat from the satellite and evaporates. Then it flows to the condenser
where it releases the heat and it condenses. In this project, the two
mains parts of a cooling system are studied: the evaporator and the
condenser. The study of the diphasic loop was done starting from
digital simulations carried out under Matlab and Femlab.
Abstract: Studies were carried out on the comparative study of the production of Avicelase enzyme using sugarcane bagasse-SCB in two different statuses (i.e. treated and untreated SCB) by thermophilic Geobacillus stearothermophilus at 50ºC. Only four thermophilic bacterial isolates were isolated and assayed for Avicelase production using UntSCB and TSCB. Only one isolate selected as most potent and identified as G. stearothermophilus used in this study. A specific endo-β-1,4-D-glucanase (Avicelase EC 3.2.1.91) was partially purified from a thermophilic bacterial strain was isolated from different soil samples when grown on cellulose enrichment SCB substrate as the sole carbon source. Results shown that G. stearothermophilus was the better Avicelase producer strain. Avicelase had an optimum pH and temperature 7.0 and 50ºC for both UntSCB and TSCB and exhibited good pH stability between "5-8" and "4-9", however, good temperature stability between (30-80ºC) for UntSCB and TSCB, respectively. Other factors affecting the production of Avicelase were compared (i.e. SCB concentration, inoculum size and different incubation periods), all results observed and obtained were revealed that the TSCB was exhibited maximal enzyme activity in comparison with the results obtained from UntSCB, so, the TSCB was enhancing the Avicelase production.
Abstract: At present the process of formation of corporate
values in Kazakh universities is under the influence of a whole range
of socio-economic and cultural changes: on the one hand universities
must maintain and transmit traditional cultural values of education,
on the other, to improve quality of service and to involve young
people to science, providing thus own competitiveness. Thus, this
article presents some results of two cycles of sociological research
conducted in 2012 and aimed at identifying possible ways to
popularize science and readiness to participate of youth in given
activities, expectations of young scientists and the prospects of future
development of the Kazakh science.
Abstract: In this paper we discuss the development of an Augmented Reality (AR) - based scientific visualization system prototype that supports identification, localisation, and 3D visualisation of oil leakages sensors datasets. Sensors generates significant amount of multivariate datasets during normal and leak situations. Therefore we have developed a data model to effectively manage such data and enhance the computational support needed for the effective data explorations. A challenge of this approach is to reduce the data inefficiency powered by the disparate, repeated, inconsistent and missing attributes of most available sensors datasets. To handle this challenge, this paper aim to develop an AR-based scientific visualization interface which automatically identifies, localise and visualizes all necessary data relevant to a particularly selected region of interest (ROI) along the virtual pipeline network. Necessary system architectural supports needed as well as the interface requirements for such visualizations are also discussed in this paper.
Abstract: This paper presents an algorithm based on the
wavelet decomposition, for feature extraction from the ECG signal
and recognition of three types of Ventricular Arrhythmias using
neural networks. A set of Discrete Wavelet Transform (DWT)
coefficients, which contain the maximum information about the
arrhythmias, is selected from the wavelet decomposition. After that a
novel clustering algorithm based on nature inspired algorithm (Ant
Colony Optimization) is developed for classifying arrhythmia types.
The algorithm is applied on the ECG registrations from the MIT-BIH
arrhythmia and malignant ventricular arrhythmia databases. We
applied Daubechies 4 wavelet in our algorithm. The wavelet
decomposition enabled us to perform the task efficiently and
produced reliable results.
Abstract: Voice Over IP (VoIP) is a technology that could pass
the voice traffic and data packet form over an IP network. Network
can be used for intranet or Internet. Phone calls using VoIP has
advantages in terms of cheaper cost of PSTN phone to more than
half, because the cost is calculated by the cost of the global nature of
the Internet. Session Initiation Protocol (SIP) is a signaling protocol
at the application layer which serves to establish, modify, and
terminate a multimedia session involving one or more users. This SIP
signaling has SIP message in text form that is used for session
management by the SIP components, such as User Agent, Registrar,
Redirect Server, and Proxy Server. To build a SIP communication is
required SIP Express Router (SER) to be able to receive SIP
messages, for handling the basic functions of SIP messages.
Problems occur when the NAT through which affects the voice
communication will be blocked starting from the sound that is not
sent or one side of the sound are sent (half duplex). How that could
be used to penetrate NAT is to use a given mediaproxy random RTP
port to penetrate NAT.
Abstract: This paper presents a case study that uses processoriented
simulation to identify bottlenecks in the service delivery
system in an emergency department of a hospital in the United Arab
Emirates. Using results of the simulation, response surface models
were developed to explain patient waiting time and the total time
patients spend in the hospital system. Results of the study could be
used as a service improvement tool to help hospital management in
improving patient throughput and service quality in the hospital
system.
Abstract: The increase popularity of multimedia application especially in image processing places a great demand on efficient data storage and transmission techniques. Network communication such as wireless network can easily be intercepted and cause of confidential information leaked. Unfortunately, conventional compression and encryption methods are too slow; it is impossible to carry out real time secure image processing. In this research, Embedded Zerotree Wavelet (EZW) encoder which specially designs for wavelet compression is examined. With this algorithm, three methods are proposed to reduce the processing time, space and security protection that will be secured enough to protect the data.
Abstract: Recently, most digital systems are designed as GALS (Globally Asynchronous Locally Synchronous) systems. Several architectures have been proposed as bus architectures for a GALS system : shared bus, segmented bus, ring bus, and so on. In this study, we propose a ring segmented bus architecture which is a combination of segmented bus and ring bus architecture with the aim of throughput enhancement. In a segmented bus architecture, segments are connected in series. By connecting the segments at the end of the bus and constructing the ring bus, it becomes possible to allocate a channel of the bus bidirectionally. The bus channel is allocated to the shortest path between segments. We consider a metastable operation caused by asynchronous communication between segments and a burst transfer between segments. According to the result of simulation, it is shown that the GALS system designed by the proposed method has the desired operations.
Abstract: This paper regards the phenomena of intensive suburbanization and urbanization in Olomouc city and in Olomouc region in general for the period of 1986–2009. A Remote Sensing approach that involves tracking of changes in Land Cover units is proposed to quantify the urbanization state and trends in temporal and spatial aspects. It actually consisted of two approaches, Experiment 1 and Experiment 2 which implied two different image classification solutions in order to provide Land Cover maps for each 1986–2009 time split available in the Landsat image set. Experiment 1 dealt with the unsupervised classification, while Experiment 2 involved semi- supervised classification, using a combination of object-based and pixel-based classifiers. The resulting Land Cover maps were subsequently quantified for the proportion of urban area unit and its trend through time, and also for the urban area unit stability, yielding the relation of spatial and temporal development of the urban area unit. Some outcomes seem promising but there is indisputably room for improvements of source data and also processing and filtering.
Abstract: Inferring the network structure from time series data
is a hard problem, especially if the time series is short and noisy.
DNA microarray is a technology allowing to monitor the mRNA
concentration of thousands of genes simultaneously that produces
data of these characteristics. In this study we try to investigate the
influence of the experimental design on the quality of the result.
More precisely, we investigate the influence of two different types of
random single gene perturbations on the inference of genetic networks
from time series data. To obtain an objective quality measure for
this influence we simulate gene expression values with a biologically
plausible model of a known network structure. Within this framework
we study the influence of single gene knock-outs in opposite to
linearly controlled expression for single genes on the quality of the
infered network structure.
Abstract: The current paper presents a numerical approach in solving the conjugate heat transfer problems. A heat conduction code is coupled internally with a computational fluid dynamics solver for developing a couple conjugate heat transfer solver. Methodology of treating non-matching meshes at interface has also been proposed. The validation results of 1D and 2D cases for the developed conjugate heat transfer code have shown close agreement with the solutions given by analysis.
Abstract: The medical data statistical analysis often requires the
using of some special techniques, because of the particularities of
these data. The principal components analysis and the data clustering
are two statistical methods for data mining very useful in the medical
field, the first one as a method to decrease the number of studied
parameters, and the second one as a method to analyze the
connections between diagnosis and the data about the patient-s
condition. In this paper we investigate the implications obtained from
a specific data analysis technique: the data clustering preceded by a
selection of the most relevant parameters, made using the principal
components analysis. Our assumption was that, using the principal
components analysis before data clustering - in order to select and to
classify only the most relevant parameters – the accuracy of
clustering is improved, but the practical results showed the opposite
fact: the clustering accuracy decreases, with a percentage
approximately equal with the percentage of information loss reported
by the principal components analysis.
Abstract: This work concerns on experimentally investigation
of surfactant flooding in fractured porous media. In this study a series
of water and surfactant injection processes were performed on
micromodels initially saturated with a heavy crude oil. Eight
fractured glass micromodels were used to illustrate effects of
surfactant types and concentrations on oil recovery efficiency in
presence of fractures with different properties i.e. fracture
orientation, length and number of fractures. Two different
surfactants with different concentrations were tested. The results
showed that surfactant flooding would be more efficient by using
SDS surfactant aqueous solution and also by locating injection well
in a proper position respect to fracture properties. This study
demonstrates different physical and chemical conditions that affect
the efficiency of this method of enhanced oil recovery.
Abstract: Higher education has an important role to play in
advocating environmentalism. Given this responsibility, the goal of
higher education should therefore be to develop graduates with the
knowledge, skills and values related to environmentalism. However,
research indicates that there is a lack of consciousness amongst
graduates on the need to be more environmentally aware, especially
when it comes to applying the appropriate knowledge and skills
related to environmentalism. Although institutions of higher learning
do include environmental parameters within their undergraduate and
postgraduate academic programme structures, the environmental
boundaries are usually confined to specific engineering majors within
an engineering programme. This makes environmental knowledge,
skills and values exclusive to certain quarters of the higher education
system. The incorporation of environmental literacy within higher
education institutions as a whole is of utmost pertinence if a nation-s
human capital is to be nurtured to become change agents for the
preservation of environment. This paper discusses approaches that
can be adapted by institutions of higher learning to include
environmental literacy within the graduate-s higher learning
experience.
Abstract: Slag sample from copper smelting operation in a
water jacket furnace from DRC plant was used. The study intends to
determine the effect of cooling in the extraction of base metals. The
cooling methods investigated were water quenching, air cooling and
furnace cooling. The latter cooling ways were compared to the
original as received slag. It was observed that, the cooling rate of the
slag affected the leaching of base metals as it changed the phase
distribution in the slag and the base metals distribution within the
phases. It was also found that fast cooling of slag prevented
crystallization and produced an amorphous phase that encloses the
base metals. The amorphous slags from the slag dumps were more
leachable in acidic medium (HNO3) which leached 46%Cu, 95% Co,
85% Zn, 92% Pb and 79% Fe with no selectivity at pH0, than in
basic medium (NH4OH). The leachability was vice versa for the
modified slags by quenching in water which leached 89%Cu with a
high selectivity as metal extractions are less than 1% for Co, Zn, Pb
and Fe at ambient temperature and pH12. For the crystallized slags,
leaching of base metals increased with the increase of temperature
from ambient temperature to 60°C and decreased at the higher
temperature of 80°C due to the evaporation of the ammonia solution
used for basic leaching, the total amounts of base metals that were
leached in slow cooled slags were very low compared to the
quenched slag samples.
Abstract: Wireless Sensor Networks consist of inexpensive, low power sensor nodes deployed to monitor the environment and collect
data. Gathering information in an energy efficient manner is a critical aspect to prolong the network lifetime. Clustering algorithms have an advantage of enhancing the network lifetime. Current clustering algorithms usually focus on global re-clustering and local re-clustering separately. This paper, proposed a combination of those two reclustering methods to reduce the energy consumption of the network. Furthermore, the proposed algorithm can apply to homogeneous as well as heterogeneous wireless sensor networks. In addition, the cluster head rotation happens, only when its energy drops below a dynamic threshold value computed by the algorithm. The simulation result shows that the proposed algorithm prolong the network lifetime compared to existing algorithms.
Abstract: A high-performance Monte Carlo simulation, which
simultaneously takes diffusion-controlled and chain-length-dependent
bimolecular termination reactions into account, is developed to
simulate atom transfer radical copolymerization of styrene and nbutyl
acrylate. As expected, increasing initial feed fraction of styrene
raises the fraction of styrene-styrene dyads (fAA) and reduces that of
n-butyl acrylate dyads (fBB). The trend of variation in randomness
parameter (fAB) during the copolymerization also varies significantly.
Also, there is a drift in copolymer heterogeneity and the highest drift
occurs in the initial feeds containing lower percentages of styrene, i.e.
20% and 5%.