Abstract: This study aims to clarify constructions which enable to improve socio-cultural values of environments and also to obtain new knowledge on selecting development plans. CVM is adopted as a method of evaluation. As a case of the research, university campus (CP; the following) is selected on account of its various environments, institutions and many users. Investigations were conducted from 4 points of view, total value and utility value of whole CP environments, values of each environment existing in CP or development plan assumed in CP. Furthermore, respondents- attributes were also investigated. In consequence, the following is obtained. 1) Almost all of total value of CP is composed of utility value of direct use. 2) Each of environment and development plans whose value is the highest is clarified. 3) Moreover, development plan to improve environmental value the most is specified.
Abstract: Cryptographic protocols are widely used in various
applications to provide secure communications. They are usually
represented as communicating agents that send and receive messages.
These agents use their knowledge to exchange information and
communicate with other agents involved in the protocol. An agent
knowledge can be partitioned into explicit knowledge and procedural
knowledge. The explicit knowledge refers to the set of information
which is either proper to the agent or directly obtained from other
agents through communication. The procedural knowledge relates to
the set of mechanisms used to get new information from what is
already available to the agent.
In this paper, we propose a mathematical framework which specifies
the explicit knowledge of an agent involved in a cryptographic
protocol. Modelling this knowledge is crucial for the specification,
analysis, and implementation of cryptographic protocols. We also,
report on a prototype tool that allows the representation and the
manipulation of the explicit knowledge.
Abstract: The contents of nitrates and nitrites were monitored in
15 ground water resources of a selected region earmarked for the
emergency supply of population. The resources have been selected on
the basis of previous assessment of natural conditions and the
exploitation of territory in the infiltration area as well as the
surroundings of water resources. The health risk analysis carried out
in relation to nitrates and nitrites, which were found to be the most
serious water contaminants, proved, that 14 resources met the health
standards in relation to the assessed criterion and could be included in
crisis plans. Water quality of ground resources may be assessed in the
same way with regard to other contaminants.
Abstract: This paper deals with a new way for designing
external fixators applied in traumatology and orthopaedics. These
fixators can be applied in the treatment of open and unstable
fractures or for lengthening human or animal bones etc. The new
design is based on the development of Ilizarov and other techniques
(i.e. shape and weight optimalization based on composite materials,
application of smart materials, nanotechnology, low x-ray absorption,
antibacterial protection, patient's comfort, reduction in the duration
of the surgical treatment, and cost).
Abstract: This paper proposes the concept of aerocapture with
aerodynamic-environment-adaptive variable geometry flexible
aeroshell that vehicle deploys. The flexible membrane is composed
of thin-layer film or textile as its aeroshell in order to solve some
problems obstructing realization of aerocapture technique.
Multi-objective optimization study is conducted to investigate
solutions and derive design guidelines. As a result, solutions which
can avoid aerodynamic heating and enlarge the corridor width up
to 10% are obtained successfully, so that the effectiveness of this
concept can be demonstrated. The deformation-use optimum
solution changes its drag coefficient from 1.6 to 1.1, along with the
change in dynamic pressure. Moreover, optimization results show
that deformation-use solution requires the membrane for which
upper temperature limit and strain limit are more than 700 K and
120%, respectively, and elasticity (Young-s modulus) is of order of
106 Pa.
Abstract: Bones are dynamic and responsive organs, they
regulate their strength and mass according to the loads which they are subjected. Because, the Wnt/β-catenin pathway has profound
effects on the regulation of bone mass, we hypothesized that mechanical loading of bone cells stimulates Wnt/β-catenin signaling, which results in the generation of new bone mass.
Mechanical loading triggers the secretion of the Wnt molecule, which after binding to transmembrane proteins, causes GSK-3β (Glycogen synthase kinase 3 beta) to cease the phosphorylation of β-catenin. β-catenin accumulation in the cytoplasm, followed by its
transport into the nucleus, binding to transcription factors (TCF/LEF)
that initiate transcription of genes related to bone formation. To test this hypothesis, we used TOPGAL (Tcf Optimal Promoter
β-galactosidase) mice in an experiment in which cyclic loads were
applied to the forearm. TOPGAL mice are reporters for cells effected
by the Wnt/β-catenin signaling pathway. TOPGAL mice are genetically engineered mice in which transcriptional activation of β-
catenin, results in the production of an enzyme, β-galactosidase. The
presence of this enzyme allows us to localize transcriptional
activation of β-catenin to individual cells, thereby, allowing us to quantify the effects that mechanical loading has on the Wnt/β-catenin pathway and new bone formation. The ulnae of loaded TOPGAL
mice were excised and transverse slices along different parts of the
ulnar shaft were assayed for the presence of β-galactosidase.
Our results indicate that loading increases β-catenin transcriptional
activity in regions where this pathway is already primed (i.e. where basal activity is already higher) in a load magnitude dependent
manner. Further experiments are needed to determine the temporal and spatial activation of this signaling in relation to bone formation.
Abstract: Tool Tracker is a client-server based application. It is essentially a catalogue of various network monitoring and management tools that are available online. There is a database maintained on the server side that contains the information about various tools. Several clients can access this information simultaneously and utilize this information. The various categories of tools considered are packet sniffers, port mappers, port scanners, encryption tools, and vulnerability scanners etc for the development of this application. This application provides a front end through which the user can invoke any tool from a central repository for the purpose of packet sniffing, port scanning, network analysis etc. Apart from the tool, its description and the help files associated with it would also be stored in the central repository. This facility will enable the user to view the documentation pertaining to the tool without having to download and install the tool. The application would update the central repository with the latest versions of the tools. The application would inform the user about the availability of a newer version of the tool currently being used and give the choice of installing the newer version to the user. Thus ToolTracker provides any network administrator that much needed abstraction and ease-ofuse with respect to the tools that he can use to efficiently monitor a network.
Abstract: The aim of the present study is to analyze empirical
researches on the social resources dimension of occupational status
attainment process and relate them to the rational choice approach.
The analysis suggests that the existing data on the strength of ties
aspect of social resources is insufficient and does not allow any
implication concerning rational actor-s behavior. However, the results
concerning work relation aspect are more encouraging.
Abstract: This paper presents an effective traffic lights
recognition method at the daytime. First, Potential Traffic Lights
Detector (PTLD) use whole color source of YCbCr channel image and
make each binary image of green and red traffic lights. After PTLD
step, Shape Filter (SF) use to remove noise such as traffic sign, street
tree, vehicle, and building. At this time, noise removal properties
consist of information of blobs of binary image; length, area, area of
boundary box, etc. Finally, after an intermediate association step witch
goal is to define relevant candidates region from the previously
detected traffic lights, Adaptive Multi-class Classifier (AMC) is
executed. The classification method uses Haar-like feature and
Adaboost algorithm. For simulation, we are implemented through Intel
Core CPU with 2.80 GHz and 4 GB RAM and tested in the urban and
rural roads. Through the test, we are compared with our method and
standard object-recognition learning processes and proved that it
reached up to 94 % of detection rate which is better than the results
achieved with cascade classifiers. Computation time of our proposed
method is 15 ms.
Abstract: The objective of this study is to propose an observer design for nonlinear systems by using an augmented linear system derived by application of a formal linearization method. A given nonlinear differential equation is linearized by the formal linearization method which is based on Taylor expansion considering up to the higher order terms, and a measurement equation is transformed into an augmented linear one. To this augmented dimensional linear system, a linear estimation theory is applied and a nonlinear observer is derived. As an application of this method, an estimation problem of transient state of electric power systems is studied, and its numerical experiments indicate that this observer design shows remarkable performances for nonlinear systems.
Abstract: This study investigated the relationship between
exercise imagery use and level of physical activity within a wide
range of exercisers in Klang valley, Malaysia. One hundred and
twenty four respondents (Mage = 28.92, SD = 9.34) completed two
sets of questionnaires (Exercise Imagery Inventory and Leisure-Time
Exercise Questionnaire) that measure the use of imagery and exercise
frequency of participants. From the result obtained, exercise imagery
is found to be significantly correlated to level of physical activity.
Besides that, variables such as gender, age and ethnicity that may
affect the use of imagery and exercise frequency were also being
assessed in this study. Among all variables, only ethnicity showed
significant difference in level of physical activity (p < 0.05). Findings
in this study suggest that further investigation should be done on
other variables such as socioeconomic, educational level, and selfefficacy
that may affect the imagery use and frequency of physical
activity among exercisers.
Abstract: Minimally invasive surgery (MIS) is now being widely used as a preferred choice for various types of operations. The need to detect various tactile properties, justifies the key role of tactile sensing that is currently missing in MIS. In this regard, Laparoscopy is one of the methods of minimally invasive surgery that can be used in kidney stone removal surgeries. At this moment, determination of the exact location of stone during laparoscopy is one of the limitations of this method that no scientific solution has been found for so far. Artificial tactile sensing is a new method for obtaining the characteristics of a hard object embedded in a soft tissue. Artificial palpation is an important application of artificial tactile sensing that can be used in different types of surgeries. In this study, a new method for determining the exact location of stone during laparoscopy is presented. In the present study, the effects of stone existence on the surface of kidney were investigated using conceptual 3D model of kidney containing a simulated stone. Having imitated palpation and modeled it conceptually, indications of stone existence that appear on the surface of kidney were determined. A number of different cases were created and solved by the software and using stress distribution contours and stress graphs, it is illustrated that the created stress patterns on the surface of kidney show not only the existence of stone inside, but also its exact location. So three-dimensional analysis leads to a novel method of predicting the exact location of stone and can be directly applied to the incorporation of tactile sensing in artificial palpation, helping surgeons in non-invasive procedures.
Abstract: The study in this paper underlines the importance of
correct joint selection of the spreading codes for uplink of multicarrier
code division multiple access (MC-CDMA) at the transmitter
side and detector at the receiver side in the presence of nonlinear
distortion due to high power amplifier (HPA). The bit error rate
(BER) of system for different spreading sequences (Walsh code, Gold
code, orthogonal Gold code, Golay code and Zadoff-Chu code) and
different kinds of receivers (minimum mean-square error receiver
(MMSE-MUD) and microstatistic multi-user receiver (MSF-MUD))
is compared by means of simulations for MC-CDMA transmission
system. Finally, the results of analysis will show, that the application
of MSF-MUD in combination with Golay codes can outperform
significantly the other tested spreading codes and receivers for all
mostly used models of HPA.
Abstract: This paper presents comparative study on recent
integer DCTs and a new method to construct a low sensitive structure
of integer DCT for colored input signals. The method refers to
sensitivity of multiplier coefficients to finite word length as an
indicator of how word length truncation effects on quality of output
signal. The sensitivity is also theoretically evaluated as a function of
auto-correlation and covariance matrix of input signal. The structure of
integer DCT algorithm is optimized by combination of lower sensitive
lifting structure types of IRT. It is evaluated by the sensitivity of
multiplier coefficients to finite word length expression in a function of
covariance matrix of input signal. Effectiveness of the optimum
combination of IRT in integer DCT algorithm is confirmed by quality
improvement comparing with existing case. As a result, the optimum
combination of IRT in each integer DCT algorithm evidently improves
output signal quality and it is still compatible with the existing one.
Abstract: This paper demonstrates the bus location system for
the route bus through the experiment in the real environment. A
bus location system is a system that provides information such as
the bus delay and positions. This system uses actual services and
positions data of buses, and those information should match data
on the database. The system has two possible problems. One, the
system could cost high in preparing devices to get bus positions.
Two, it could be difficult to match services data of buses. To avoid
these problems, we have developed this system at low cost and short
time by using the smart phone with GPS and the bus route system.
This system realizes the path planning considering bus delay and
displaying position of buses on the map. The bus location system
was demonstrated on route buses with smart phones for two months.
Abstract: This paper presents the convergence analysis
of a prediction based blind equalizer for IIR channels.
Predictor parameters are estimated by using the recursive
least squares algorithm. It is shown that the prediction
error converges almost surely (a.s.) toward a scalar
multiple of the unknown input symbol sequence. It is
also proved that the convergence rate of the parameter
estimation error is of the same order as that in the iterated
logarithm law.
Abstract: Computerized alarm systems have been applied
increasingly to nuclear power plants. For existing plants, an add-on
computer alarm system is often installed to the control rooms. Alarm
avalanches during the plant transients are major problems with the
alarm systems in nuclear power plants. Computerized alarm systems
can process alarms to reduce the number of alarms during the plant
transients. This paper describes various alarm processing methods, an
alarm cause tracking function, and various alarm presentation schemes
to show alarm information to the operators effectively which are
considered during the development of several computerized alarm
systems for Korean nuclear power plants and are found to be helpful to
the operators.
Abstract: The integrity and issues related to electrostatic performance associated with scaling Si MOSFET bulk sub 10nm channel length promotes research in new device architectures such as SOI, double gate and GAA MOSFET. In this paper, we present some novel characteristic of horizontal rectangular gate\gate all around MOSFETs with dual metal of gate we obtained using SILVACO TCAD tools. We will also exhibit some simulation results we obtained relating to the influence of some parameters variation on our structure, that having a direct impact on their threshold voltage and drain current. In addition, our TFET showed reasonable ION/IOFF ratio of (104) and low drain induced barrier lowering (DIBL) of 39 mV/V.
Abstract: At the present, auto part industries have become higher challenge in strategy market. As this consequence, manufacturers need to have better response to customers in terms of quality, cost, and delivery time. Moreover, they need to have a good management in factory to comply with international standard maximum capacity and lower cost. This would lead companies to have to order standard part from aboard and become the major cost of inventory. The development of auto part research by recycling materials experiment is to compare the auto parts from recycle materials to international auto parts (CKD). Factors studied in this research were the recycle material ratios of PU-foam, felt, and fabric. Results of recycling materials were considered in terms of qualities and properties on the parameters such as weight, sound absorption, water absorption, tensile strength, elongation, and heat resistance with the CKD. The results were showed that recycling materials would be used to replace for the CKD.
Abstract: This paper presents a dynamic adaptation scheme for
the frequency of inter-deme migration in distributed genetic algorithms
(GA), and its VLSI hardware design. Distributed GA,
or multi-deme-based GA, uses multiple populations which evolve
concurrently. The purpose of dynamic adaptation is to improve
convergence performance so as to obtain better solutions. Through
simulation experiments, we proved that our scheme achieves better
performance than fixed frequency migration schemes.