Abstract: Thermal-driven refrigeration systems have attracted increasing research and development interest in recent years. These systems do not cause ozone depletion and can reduce demand on electricity. The main objective of this work is to perform theoretical analyses of a thermal-driven refrigeration system using a new sorbent-sorptive pair as the working pair. The active component of sorbent is sodium thiocyanate (NaSCN). Ammonia (NH3) is chosen as sorptive. Based on the thermodynamic properties of the working solution, a mathematical model is introduced to analyze the system characteristics and performance. The results are used to compare with other thermal-driven refrigeration systems. It is shown that the advantages provided by this system over other absorption units include lower generator and evaporator temperatures, a higher coefficient of performance (COP). The COP is about 10 percent higher than the ones for the NH3-H2O system working at the same conditions.
Abstract: Attempt was made to improve certain characteristics of bio-oil derived from palm kernel pyrolysis by blending it with diesel fuel and alcohols. Two types of alcohol, ethanol or butanol, was used as cosolvent to stabilize the phase of ternary systems. Phase behaviors and basic fuel properties of palm kernel bio-oildiesel- alcohol systems were investigated in this study. Alcohol types showed a significant influence on the phase characteristics with palm kernel bio-oil-diesel-butanol system giving larger soluble area than that of palm kernel bio-oil-diesel-ethanol system. For fuel properties, blended fuels showed superior properties including lower values of density (~860 kg/m3 at 25°C), viscosity (~4.12 mm2/s at 40°C), carbon residue (1.02-2.53 wt%), ash (0.018-0.034 wt%) and pour point (
Abstract: This paper proposes different methods for estimation
of the harmonic currents of the single-phase diode bridge rectifier. Both simple and advanced methods are compared and the models are
put into a context of practical use for calculating the harmonic distortion in a typical application. Finally, the different models are
compared to measurements of a real application and convincing results are achieved.
Abstract: In this paper we propose a robust adaptive fuzzy
controller for a class of nonlinear system with unknown dynamic.
The method is based on type-2 fuzzy logic system to approximate
unknown non-linear function. The design of the on-line adaptive
scheme of the proposed controller is based on Lyapunov technique.
Simulation results are given to illustrate the effectiveness of the
proposed approach.
Abstract: Clustering unstructured text documents is an
important issue in data mining community and has a number of
applications such as document archive filtering, document
organization and topic detection and subject tracing. In the real
world, some of the already clustered documents may not be of
importance while new documents of more significance may evolve.
Most of the work done so far in clustering unstructured text
documents overlooks this aspect of clustering. This paper, addresses
this issue by using the Fading Function. The unstructured text
documents are clustered. And for each cluster a statistics structure
called Cluster Profile (CP) is implemented. The cluster profile
incorporates the Fading Function. This Fading Function keeps an
account of the time-dependent importance of the cluster. The work
proposes a novel algorithm Clustering n-ary Merge Algorithm
(CnMA) for unstructured text documents, that uses Cluster Profile
and Fading Function. Experimental results illustrating the
effectiveness of the proposed technique are also included.
Abstract: The double difference sequence space I2 (M, of fuzzy numbers for both 1 < p < oo and 0 < p < 1, is introduced. Some general properties of this sequence space are studied. Some inclusion relations involving this sequence space are obtained.
Abstract: Horizontal wells are proven to be better producers
because they can be extended for a long distance in the pay zone.
Engineers have the technical means to forecast the well productivity
for a given horizontal length. However, experiences have shown that
the actual production rate is often significantly less than that of
forecasted. It is a difficult task, if not impossible to identify the real
reason why a horizontal well is not producing what was forecasted.
Often the source of problem lies in the drilling of horizontal section
such as permeability reduction in the pay zone due to mud invasion
or snaky well patterns created during drilling. Although drillers aim
to drill a constant inclination hole in the pay zone, the more frequent
outcome is a sinusoidal wellbore trajectory. The two factors, which
play an important role in wellbore tortuosity, are the inclination and
side force at bit. A constant inclination horizontal well can only be
drilled if the bit face is maintained perpendicular to longitudinal axis
of bottom hole assembly (BHA) while keeping the side force nil at
the bit. This approach assumes that there exists no formation force at
bit. Hence, an appropriate BHA can be designed if bit side force and
bit tilt are determined accurately. The Artificial Neural Network
(ANN) is superior to existing analytical techniques. In this study, the
neural networks have been employed as a general approximation tool
for estimation of the bit side forces. A number of samples are
analyzed with ANN for parameters of bit side force and the results
are compared with exact analysis. Back Propagation Neural network
(BPN) is used to approximation of bit side forces. Resultant low
relative error value of the test indicates the usability of the BPN in
this area.
Abstract: Building inspection is one of the key components of building maintenance. The primary purpose of performing a building inspection is to evaluate the building-s condition. Without inspection, it is difficult to determine a built asset-s current condition, so failure to inspect can contribute to the asset-s future failure. Traditionally, a longhand survey description has been widely used for property condition reports. Surveys that employ ratings instead of descriptions are gaining wide acceptance in the industry because they cater to the need for numerical analysis output. These kinds of surveys are also in keeping with the new RICS HomeBuyer Report 2009. In this paper, we propose a new assessment method, derived from the current rating systems, for assessing the specifically smart school building-s condition and rating the seriousness of each defect identified. These two assessment criteria are then multiplied to find the building-s score, which we called the Condition Survey Protocol (CSP) 1 Matrix. Instead of a longhand description of a building-s defects, this matrix requires concise explanations about the defects identified, thus saving on-site time during a smart school building inspection. The full score is used to give the building an overall rating: Good, Fair or Dilapidated.
Abstract: The purpose of this paper is to provide a practical
example to the Linear Quadratic Gaussian (LQG) controller. This
method includes a description and some discussion of the discrete
Kalman state estimator. One aspect of this optimality is that the
estimator incorporates all information that can be provided to it. It
processes all available measurements, regardless of their precision, to
estimate the current value of the variables of interest, with use of
knowledge of the system and measurement device dynamics, the
statistical description of the system noises, measurement errors, and
uncertainty in the dynamics models.
Since the time of its introduction, the Kalman filter has been the
subject of extensive research and application, particularly in the area
of autonomous or assisted navigation. For example, to determine the
velocity of an aircraft or sideslip angle, one could use a Doppler
radar, the velocity indications of an inertial navigation system, or the
relative wind information in the air data system. Rather than ignore
any of these outputs, a Kalman filter could be built to combine all of
this data and knowledge of the various systems- dynamics to
generate an overall best estimate of velocity and sideslip angle.
Abstract: Combining energy efficiency with renewable energy
sources constitutes a key strategy for a sustainable future. The wind
power sector stands out as a fundamental element for the
achievement of the European renewable objectives and Portugal is no
exception to the increase of the wind energy for the electricity
generation. This work proposes an optimization model for the long
range electricity power planning in a system similar to the
Portuguese one, where the expected impacts of the increasing
installed wind power on the operating performance of thermal power
plants are taken into account. The main results indicate that the
increasing penetration of wind power in the electricity system will
have significant effects on the combined cycle gas power plants
operation and on the theoretically expected cost reduction and
environmental gains. This research demonstrated the need to address
the impact that energy sources with variable output may have, not
only on the short-term operational planning, but especially on the
medium to long range planning activities, in order to meet the
strategic objectives for the energy sector.
Abstract: This paper proposes a novel approach that combines statistical models and support vector machines. A hybrid scheme which appropriately incorporates the advantages of both the generative and discriminant model paradigms is described and evaluated. Support vector machines (SVMs) are trained to divide the whole speakers' space into small subsets of speakers within a hierarchical tree structure. During testing a speech token is assigned to its corresponding group and evaluation using gaussian mixture models (GMMs) is then processed. Experimental results show that the proposed method can significantly improve the performance of text independent speaker identification task. We report improvements of up to 50% reduction in identification error rate compared to the baseline statistical model.
Abstract: In this paper, we introduce a robust state feedback controller design using Linear Matrix Inequalities (LMIs) and guaranteed cost approach for Takagi-Sugeno fuzzy systems. The purpose on this work is to establish a systematic method to design controllers for a class of uncertain linear and non linear systems. Our approach utilizes a certain type of fuzzy systems that are based on Takagi-Sugeno (T-S) fuzzy models to approximate nonlinear systems. We use a robust control methodology to design controllers. This method not only guarantees stability, but also minimizes an upper bound on a linear quadratic performance measure. A simulation example is presented to show the effectiveness of this method.
Abstract: In the present study, an attempt was made to examine
the potential of aerobic mixed culture for decolourization of Remazol Black B dye in batch reactors. The effect of pH, temperature, inoculum, initial concentration of dye and initial concentration of
glucose was studied with an aim to determine the optimal conditions
required for maximum decolourization and degradation. The culture
exhibited maximum decolourization ability at pH between 7-8 and at
30°C. A 10% (v/v) inoculum and 1% (w/v) glucose concentration
were found to be the optimum for decolourization. A maximum of
98% decolourization was observed at 25 ppm initial concentration of
dye after 18 hours of incubation period. At higher dye concentration
of 300 ppm, the removal in colour was found to be 75% in 48 hours of incubation period. The results show that the enriched mixed culture from activated sludge has good potential in removal of Remazol Black B dye from wastewater under aerobic conditions.
Abstract: In this paper, an approach to reduce the computation steps required by fast neural networksfor the searching process is presented. The principle ofdivide and conquer strategy is applied through imagedecomposition. Each image is divided into small in sizesub-images and then each one is tested separately usinga fast neural network. The operation of fast neuralnetworks based on applying cross correlation in thefrequency domain between the input image and theweights of the hidden neurons. Compared toconventional and fast neural networks, experimentalresults show that a speed up ratio is achieved whenapplying this technique to locate human facesautomatically in cluttered scenes. Furthermore, fasterface detection is obtained by using parallel processingtechniques to test the resulting sub-images at the sametime using the same number of fast neural networks. Incontrast to using only fast neural networks, the speed upratio is increased with the size of the input image whenusing fast neural networks and image decomposition.
Abstract: Cast metal inlays can be used on molars requiring a
class II restoration instead amalgam and offer a durable alternative.
Because it is known that class II inlays may increase the
susceptibility to fracture, it is important to ensure optimal
performance in selection of the adequate preparation design to reduce
stresses in teeth structures and also in the restorations. The aim of the
study was to investigate the influence of preparation design on stress
distribution in molars with different class II preparations and in cast
metal inlays. The first step of the study was to achieve 3D models in
order to analyze teeth and cast metal class II inlays. The geometry of
the intact tooth was obtained by 3D scanning using a manufactured
device. With a NURBS modeling program the preparations and the
appropriately inlays were designed. 3D models of first upper molars
of the same shape and size were created. Inlay cavities designs were
created using literature data. The geometrical model was exported
and the mesh structure of the solid 3D model was created for
structural simulations. Stresses were located around the occlusal
contact areas. For the studied cases, the stress values were not
significant influenced by the taper of the preparation. it was
demonstrated stresses are higher in the cast metal restorations and
therefore the strength of the teeth is not affected.
Abstract: The stability characteristics of water lubricated journal bearings having three axial grooves are obtained theoretically. In this lubricant (water) is fed under pressure from one end of the bearing, through the 3-axial grooves (groove angles may vary). These bearings can use the process fluid as the lubricant, as in the case of feed water pumps. The Reynolds equation is solved numerically by the finite difference method satisfying the boundary conditions. The stiffness and damping coefficient for various bearing number and eccentricity ratios, assuming linear pressure drop along the groove, shows that smaller groove angles better results.
Abstract: Wheat germ has a balanced amino acid composition of the protein, which is well digested by enzymes in the gastrointestinal tract of humans, a high content of vitamins, minerals and unsaturated acids. Introduction components grain food products will enrich their biologically important substances, giving these products a number of valuable properties and reducing their caloric.
A complex natural system of substances in foods will help replenish the body's need of essential nutrients, increasing its resistance to the harmful effects of the environment, prolong life. In this regard, there was a need for the development of production technology of protein complexes from wheat germ and then applying them in food, particularly in the dairy industry. Experimental studies were conducted to determine the number of herbal supplements on the sensory characteristics of the product. Studies have been conducted to determine the optimal process parameters of water activity and moisture content of the investigational product.
Abstract: The recommendation of the committee on corporate
governance for public companies in Nigeria, that the position of the
CEO be separated from board chair has generated serious debate
among scholars and practitioners. They have questioned the
appropriateness of implementing corporate governance model that is
based on Anglo-Saxon agency problem characterized by dispersed
ownership structure; where markets for corporate control, legal
regulation, and contractual incentives are the key governance
mechanisms. This paper strives to resolve the argument by adopting
an institutional perspective in testing the agency theory on board
duality. The study developed a theoretical and empirical model to
better understand how ownership structure influences agency conflict
and how such affects firm performance. Hence, the study examines
the relationship between CEO duality and firm performance using
two institutional ownership structures – dispersed ownership and
concentrated ownership structures. The empirical results show that
CEO duality is negatively correlated with firm performance in
Nigeria irrespective of the firm-s ownership structure. The findings
give credence to the recommendation of the Peterside Commission
on the need to separate the position of CEO from board chair.
Abstract: Plasma plume will be produced and arrive at spacecraft when the electric thruster operates on orbit. It-s important to characterize the thruster plasma parameters because the plume has significant effects or hazards on spacecraft sub-systems and parts. Through the ground test data of the desired parameters, the major characteristics of the thruster plume will be achieved. Also it is very important for optimizing design of Ion thruster. Retarding Potential Analyzer (RPA) is an effective instrument for plasma ion energy per unit charge distribution measurement. Special RPA should be designed according to certain plume plasma parameters range and feature. In this paper, major principles usable for good RPA design are discussed carefully. Conform to these principles, a four-grid planar electrostatic energy analyzer RPA was designed to avoid false data, and details were discussed including construction, materials, aperture diameter and so on. At the same time, it was designed more suitable for credible and long-duration measurements in the laboratory. In the end, RPA measurement results in the laboratory were given and discussed.
Abstract: This study investigated possible ways to improve the
efficiency of the platinum precipitation process using ammonium
chloride by reducing the platinum content reporting to the effluent.
The ore treated consist of five platinum group metals namely,
ruthenium, rhodium, iridium, platinum, palladium and a precious
metal gold. Gold, ruthenium, rhodium and iridium were extracted
prior the platinum precipitation process. Temperature, reducing
agent, flow rate and potential difference were the variables controlled
to determine the operation conditions for optimum platinum
precipitation efficiency. Hydrogen peroxide was added as the
oxidizing agent at the temperature of 85-90oC and potential
difference of 700-850mV was the variable used to check the
oxidizing state of platinum. The platinum was further purified at
temperature between 60-65oC, potential difference above 700 mV,
ammonium chloride of 200 l, and at these conditions the platinum
content reporting to the effluent was reduced to less than 300ppm,
resulting in optimum platinum precipitation efficiency and purity of
99.9%.