Abstract: In this paper, the difference between the Alternating
Direction Method (ADM) and the Non-Splitting Method (NSM) is
investigated, while both methods applied to the simulations for 2-D
multimaterial radiation diffusion issues. Although the ADM have the
same accuracy orders with the NSM on the uniform meshes, the
accuracy of ADM will decrease on the distorted meshes or the
boundary of domain. Numerical experiments are carried out to
confirm the theoretical predication.
Abstract: The increasing divorce and fertility rates outside of marriage, the changing values in the last decades have led to a high prevalence of single parent families. Currently, worldwide, singleparent families represent about a quarter of all families. Recent changes occurring in the structure of single-parent families and also the multitude of factors that influence the quality of life of these families require the development of new research tools in order to provide foundations for social policies addressed to this type of family. The purpose of this paper is to present an analysis concerning the quality of life for single parent families in Romania, based on data collected through a research methodology developed by the authors within a scientific research project funded by a national grant called Partnerships in priority areas.
Abstract: This paper presents the experimental results on
ageing deterioration of silicone rubber outdoor polymer insulator
under salt water dip wheel test based on IEC 62217. In order to comparison effect of chemical contents, silicone rubber outdoor
polymer insulators having same configuration and leakage distant
from two manufactures were tested together continuously 30,000 test cycles. Many discharge activities were observed in during the test.
After 30,000 test cycles, in spite of same configuration, differences in
degree of surface aging were observed. Physical analysis such as
decreasing in hydrophobicity and increasing in hardness
measurement were measured on two-type tested specimen surface in order to confirm degree of surface ageing. Furthermore, chemical
analysis by ATR-FTIR to diagnose the chemical change of tested
specimen surface was conducted to confirm the physical analysis results.
Abstract: The scroll pump belongs to the category of positive
displacement pump can be used for continuous pumping of gases at
low pressure apart from general vacuum application. The shape of
volume occupied by the gas moves and deforms continuously as the
spiral orbits. To capture flow features in such domain where mesh
deformation varies with time in a complicated manner, mesh less
solver was found to be very useful. Least Squares Kinetic Upwind
Method (LSKUM) is a kinetic theory based mesh free Euler solver
working on arbitrary distribution of points. Here upwind is enforced
in molecular level based on kinetic flux vector splitting scheme
(KFVS). In the present study we extended the LSKUM to moving
node viscous flow application. This new code LSKUM-NS-MN for
moving node viscous flow is validated for standard airfoil pitching
test case. Simulation performed for flow through scroll pump using
LSKUM-NS-MN code agrees well with the experimental pumping
speed data.
Abstract: A procedural-animation-based approach which rapidly
synthesize the adaptive locomotion for quadruped characters that they
can walk or run in any directions on an uneven terrain within a
dynamic environment was proposed. We devise practical motion
models of the quadruped animals for adapting to a varied terrain in a
real-time manner. While synthesizing locomotion, we choose the
corresponding motion models by means of the footstep prediction of
the current state in the dynamic environment, adjust the key-frames of
the motion models relying on the terrain-s attributes, calculate the
collision-free legs- trajectories, and interpolate the key-frames
according to the legs- trajectories. Finally, we apply dynamic time
warping to each part of motion for seamlessly concatenating all desired
transition motions to complete the whole locomotion. We reduce the
time cost of producing the locomotion and takes virtual characters to
fit in with dynamic environments no matter when the environments are
changed by users.
Abstract: The main objective of the present paper is to derive an easy numerical technique for the analysis of the free vibration through the stepped regions of plates. Based on the utilities of the step by step integration initial values IV and Finite differences FD methods, the present improved Initial Value Finite Differences (IVFD) technique is achieved. The first initial conditions are formulated in convenient forms for the step by step integrations while the upper and lower edge conditions are expressed in finite difference modes. Also compatibility conditions are created due to the sudden variation of plate thickness. The present method (IVFD) is applied to solve the fourth order partial differential equation of motion for stepped plate across two different panels under the sudden step compatibility in addition to different types of end conditions. The obtained results are examined and the validity of the present method is proved showing excellent efficiency and rapid convergence.
Abstract: Sowing date and density are two important factors in
produce of coriander. A field experiment was conducted with
treatments: sowing time (5 May, 20 May, 4 June and 19 June 2009)
and plant density (10, 30, 50 and 70 plants m-2). The experimental
plots were laid out in a factorial according to a RCBD with three
replications. Results showed that the effect of sowing dates and
densities were significant on grain yield and yield components, but
interaction effects between sowing time and density were non
significant for all of traits in this trial. At sowing times 5 May, 20
May, 4 June and 19 June, grain yield obtained 736.9, 837.8, 1003.1
and 1299.6 kg ha-1, respectively. At 10, 30, 50 and 70 plants m-2,
grain yield were 794.9, 1031.0, 1092.3 and 959.3 kg ha-1,
respectively. In this experiment, sowing at 19 June and 50 and 30
plants m-2 had the most grain yield.
Abstract: Microbial contamination, most of which are fecal born in drinking water and food industry is a serious threat to humans. Escherichia coli is one of the most common and prevalent among them. We have developed a sensor for rapid and an early detection of contaminants, taking E.coli as a threat indicator organism. The sensor is based on co-polymerizations of aniline and formaldehyde in form of thin film over glass surface using the vacuum deposition technique. The particular doping combination of thin film with Fe-Al and Fe-Cu in different concentrations changes its non conducting properties to p- type semi conductor. This property is exploited to detect the different contaminants, believed to have the different surface charge. It was found through experiments that different microbes at same OD (0.600 at 600 nm) have different conductivity in solution. Also the doping concentration is found to be specific for attracting microbes on the basis of surface charge. This is a simple, cost effective and quick detection method which not only decreases the measurement time but also gives early warnings for highly contaminated samples.
Abstract: Modeling the behavior of the dialogue management in
the design of a spoken dialogue system using statistical methodologies
is currently a growing research area. This paper presents a work
on developing an adaptive learning approach to optimize dialogue
strategy. At the core of our system is a method formalizing dialogue
management as a sequential decision making under uncertainty whose
underlying probabilistic structure has a Markov Chain. Researchers
have mostly focused on model-free algorithms for automating the
design of dialogue management using machine learning techniques
such as reinforcement learning. But in model-free algorithms there
exist a dilemma in engaging the type of exploration versus exploitation.
Hence we present a model-based online policy learning
algorithm using interconnected learning automata for optimizing
dialogue strategy. The proposed algorithm is capable of deriving
an optimal policy that prescribes what action should be taken in
various states of conversation so as to maximize the expected total
reward to attain the goal and incorporates good exploration and
exploitation in its updates to improve the naturalness of humancomputer
interaction. We test the proposed approach using the most
sophisticated evaluation framework PARADISE for accessing to the
railway information system.
Abstract: It-s difficult for China-s current land transfer
institutions limited to county-wide to solve the contradiction between
urban-rural development and construction land shortage. On the basis of analyzing China-s construction land transfer system, and evaluation
toward Transfer of development rights (TDR) practices in Anhui and
Chongqing, the passage proposes: (1) we should establish a multi-level
land indicators trade market under the guidance of regional spatial
objectives, and allow land transfer paid across cities and counties
within a specific area following the regulation of both government and
market; (2) it would be better to combine organically the policy ntentions of land plan, regional plan, urban plan and economic plan, and link them with land indicators transfer to promote a wider range of
urban-rural balance and regional coordination.
Abstract: This paper describes interconnection between
technical and economical making decision. The reason of this dealing
could be different: poor technical condition, change of substation
(electrical network) regime, power transformer owner budget deficit
and increasing of tariff on electricity. Establishing of recommended
practice as well as to give general advice and guidance in economical
sector, testing, diagnostic power transformers to establish its
conditions, identify problems and provide potential remedies.
Abstract: The VoIP networks as alternative method to traditional PSTN system has been implemented in a wide variety of structures
with multiple protocols, codecs, software and hardware–based
distributions. The use of cryptographic techniques let the users to have a secure communication, but the calculate throughput as well as the QoS parameters are affected according to the used algorithm. This
paper analyzes the VoIP throughput and the QoS parameters with
different commercial encryption methods. The measurement–based
approach uses lab scenarios to simulate LAN and WAN
environments. Security mechanisms such as TLS, SIAX2, SRTP,
IPSEC and ZRTP are analyzed with μ-LAW and GSM codecs.
Abstract: (Bi0.5Na0.5)TiO3 doped with 8 mol % BaTiO3 powder
(BNT-BT0.08), prepared by sol-gel method was compacted and
sintered by Spark Plasma Sintering (SPS) process. The influence of
SPS temperature on the densification of BNT-BT0.08 ceramic was
investigated. Starting from sol-gel nanopowder of BNT-BT
containing 8 mol % BaTiO3 with an average particles size of about
30 nm, were obtained ceramics with density around 98 % of the
theoretical density value when the SPS temperature used was about
850 °C. The average grain size of the resulting ceramics was 80 nm.
The BNT-BT0.08 ceramic sample obtained by SPS method has shown
good electric properties at various frequencies.
Abstract: The use of Quantum dots is a promising emerging
Technology for implementing digital system at the nano level. It is
effecient for attractive features such as faster speed , smaller size and
low power consumption than transistor technology. In this paper,
various Combinational and sequential logical structures - HALF
ADDER, SR Latch and Flip-Flop, D Flip-Flop preceding NAND,
NOR, XOR,XNOR are discussed based on QCA design, with
comparatively less number of cells and area. By applying these
layouts, the hardware requirements for a QCA design can be reduced.
These structures are designed and simulated using QCA Designer
Tool. By taking full advantage of the unique features of this
technology, we are able to create complete circuits on a single layer
of QCA. Such Devices are expected to function with ultra low
power Consumption and very high speeds.
Abstract: An effective visual error concealment method has been presented by employing a robust rotation, scale, and translation (RST) invariant partial patch matching model (RSTI-PPMM) and
exemplar-based inpainting. While the proposed robust and inherently
feature-enhanced texture synthesis approach ensures the generation
of excellent and perceptually plausible visual error concealment results, the outlier pruning property guarantees the significant quality improvements, both quantitatively and qualitatively. No intermediate
user-interaction is required for the pre-segmented media and the
presented method follows a bootstrapping approach for an automatic
visual loss recovery and the image and video error concealment.
Abstract: Lighting is not only important for the safety of traffic,
but also it is very important for the protection of pedestrians.
Improvement on visibility in a long distance, lighting, signing,
reduces considerably the risk of accidents in crosswalks. This paper
evaluates different aspects of crosswalks including signing and
lighting to improve road safety.
Abstract: This paper explores oil prices changes impact on energy policy of Kazakhstan in 2001-2009. It involves the role of oil income to the economic development, process of diversification of internal and external energy policy of Kazakhstan, and the changes in oil law towards subsoil users.
Abstract: In this paper, for the understanding of the phytoplankton dynamics in marine ecosystem, a susceptible and an infected class of phytoplankton population is considered in spatiotemporal domain.
Here, the susceptible phytoplankton is growing logistically and the
growth of infected phytoplankton is due to the instantaneous Holling
type-II infection response function. The dynamics are studied in terms of the local and global stabilities for the system and further
explore the possibility of Hopf -bifurcation, taking the half saturation period as (i.e., ) the bifurcation parameter in temporal domain.
It is also observe that the reaction diffusion system exhibits spatiotemporal
chaos and pattern formation in phytoplankton dynamics,
which is particularly important role play for the spatially extended phytoplankton system. Also the effect of the diffusion coefficient
on the spatial system for both one and two dimensional case is obtained. Furthermore, we explore the higher-order stability analysis
of the spatial phytoplankton system for both linear and no-linear system. Finally, few numerical simulations are carried out for pattern
formation.
Abstract: High building constructions are increasing in south
beaches of the Caspian Sea because of tourist attractions and limitation of residential areas. According to saturated alluvial fields transfer of load from high structures to the soil by piles is inevitable.
In spite of most of these piles are under compression forces, tension piles are used in special conditions. Few studies have been conducted
because of the limited use of these piles. Tension capacity of openended pipe piles in full scale was tested in this study. The length of the bored piles was 420 up to 480 cm and all were in 120 cm
diameter. The results of testing 7 piles were compared with the results of relations given by researches.
Abstract: In this paper, we propose disease diagnosis hardware
architecture by using Hypernetworks technique. It can be used to
diagnose 3 different diseases (SPECT Heart, Leukemia, Prostate
cancer). Generally, the disparate diseases require specified diagnosis
hardware model for each disease. Using similarities of three diseases
diagnosis processor, we design diagnosis processor that can diagnose
three different diseases. Our proposed architecture that is combining
three processors to one processor can reduce hardware size without
decrease of the accuracy.