Abstract: In its attempt to offer new ways into autonomy for a
large population of disabled people, assistive technology has largely
been inspired by robotics engineering. Recent human-like robots
carry new hopes that it seems to us necessary to analyze by means of
a specific theory of anthropomorphism. We propose to distinguish a
functional anthropomorphism which is the one of actual wheelchairs
from a structural anthropomorphism based on a mimicking of human
physiological systems. If functional anthropomorphism offers the
main advantage of eliminating the physiological systems
interdependence issue, the highly link between the robot for disabled
people and their human-built environment would lead to privilege in
the future the anthropomorphic structural way. In this future
framework, we highlight a general interdependence principle : any
partial or local structural anthropomorphism generates new
anthropomorphic needs due to the physiological systems
interdependency, whose effects can be evaluated by means of
specific anthropomorphic criterions derived from a set theory-based
approach of physiological systems.
Abstract: Physical education (PE) is still neglected in schools
despite its academic, social, psychological, and health benefits.
Based on the assumption that Information and Communication
Technologies (ICTs) can contribute to the development of PE in
schools, this study aims to design a model of the factors affecting the
adoption of ICTs for PE in schools. The proposed model is based on
a sound theoretical framework. It was designed following a literature
review of technology adoption theories and of ICT adoption factors
for physical education. The technology adoption model that fitted to
the best all ICT adoption factors was then chosen as the basis for the
proposed model. It was found that the Unified Theory of Acceptance
and Use of Technology (UTAUT) is the most adequate theoretical
framework for the modeling of ICT adoption factors for physical
education.
Abstract: The main aim of the current study was to examine the
effect of emotional intelligence on retention. The study also aimed at
analyzing the role of job involvement, as a moderator, in the effect of
emotional intelligence on retention. Using data gathered from 241
employees working with hotels and tourism corporations listed in
Amman Stock Exchange in Jordan, emotional intelligence, job
involvement and retention were measured. Hierarchical regression
analyses were used to test the three main hypotheses. Results
indicated that retention was related to emotional intelligence.
Moreover, the study yielded support for the claim that job
involvement had a moderating effect on the relationship between
emotional intelligence and retention.
Abstract: Chlorine is one of the most abundant elements in
nature, which undergoes a complex biogeochemical cycle. Chlorine
bound in some substances is partly responsible for atmospheric ozone
depletion and contamination of some ecosystems. As due to
international regulations anthropogenic burden of volatile
organochlorines (VOCls) in atmosphere decreases, natural sources
(plants, soil, abiotic formation) are expected to dominate VOCl
production in the near future. Examples of plant VOCl production are
methyl chloride, and bromide emission from (sub)tropical ferns,
chloroform, 1,1,1-trichloroethane and tetrachloromethane emission
from temperate forest fern and moss. Temperate forests are found to
emit in addition to the previous compounds tetrachloroethene, and
brominated volatile compounds. VOCls can be taken up and further
metabolized in plants. The aim of this work is to identify and
quantitatively analyze the formed VOCls in temperate forest
ecosystems by a cryofocusing/GC-ECD detection method, hence
filling a gap of knowledge in the biogeochemical cycle of chlorine.
Abstract: Mobile IP has been developed to provide the
continuous information network access to mobile users. In IP-based
mobile networks, location management is an important component of
mobility management. This management enables the system to track
the location of mobile node between consecutive communications. It
includes two important tasks- location update and call delivery.
Location update is associated with signaling load. Frequent updates
lead to degradation in the overall performance of the network and the
underutilization of the resources. It is, therefore, required to devise
the mechanism to minimize the update rate. Mobile IPv6 (MIPv6)
and Hierarchical MIPv6 (HMIPv6) have been the potential
candidates for deployments in mobile IP networks for mobility
management. HMIPv6 through studies has been shown with better
performance as compared to MIPv6. It reduces the signaling
overhead traffic by making registration process local. In this paper,
we present performance analysis of MIPv6 and HMIPv6 using an
analytical model. Location update cost function is formulated based
on fluid flow mobility model. The impact of cell residence time, cell
residence probability and user-s mobility is investigated. Numerical
results are obtained and presented in graphical form. It is shown that
HMIPv6 outperforms MIPv6 for high mobility users only and for low
mobility users; performance of both the schemes is almost equivalent
to each other.
Abstract: In this paper, we present a new algorithm for clustering data in large datasets using image processing approaches. First the dataset is mapped into a binary image plane. The synthesized image is then processed utilizing efficient image processing techniques to cluster the data in the dataset. Henceforth, the algorithm avoids exhaustive search to identify clusters. The algorithm considers only a small set of the data that contains critical boundary information sufficient to identify contained clusters. Compared to available data clustering techniques, the proposed algorithm produces similar quality results and outperforms them in execution time and storage requirements.
Abstract: Injection molding is a very complicated process to
monitor and control. With its high complexity and many process
parameters, the optimization of these systems is a very challenging
problem. To meet the requirements and costs demanded by the
market, there has been an intense development and research with the
aim to maintain the process under control. This paper outlines the
latest advances in necessary algorithms for plastic injection process
and monitoring, and also a flexible data acquisition system that
allows rapid implementation of complex algorithms to assess their
correct performance and can be integrated in the quality control
process. This is the main topic of this paper. Finally, to demonstrate
the performance achieved by this combination, a real case of use is
presented.
Abstract: Small cracks or chips of a product appear very
frequently in the course of continuous production of an automatic
press process system. These phenomena become the cause of not only
defective product but also damage of a press mold. In order to solve
this problem AE system was introduced. AE system was expected to
be very effective to real time detection of the defective product and to
prevention of the damage of the press molds.
In this study, for pick and analysis of AE signals generated from the
press process, AE sensors/pre-amplifier/analysis and processing board
were used as frequently found in the other similar cases. For analysis
and processing the AE signals picked in real time from the good or bad
products, specialized software called cdm8 was used. As a result of
this work it was conformed that intensity and shape of the various AE
signals differ depending on the weight and thickness of metal sheet
and process type.
Abstract: Much research into handwritten Thai character
recognition have been proposed, such as comparing heads of
characters, Fuzzy logic and structure trees, etc. This paper presents a
system of handwritten Thai character recognition, which is based on
the Ant-minor algorithm (data mining based on Ant colony
optimization). Zoning is initially used to determine each character.
Then three distinct features (also called attributes) of each character
in each zone are extracted. The attributes are Head zone, End point,
and Feature code. All attributes are used for construct the
classification rules by an Ant-miner algorithm in order to classify
112 Thai characters. For this experiment, the Ant-miner algorithm is
adapted, with a small change to increase the recognition rate. The
result of this experiment is a 97% recognition rate of the training set
(11200 characters) and 82.7% recognition rate of unseen data test
(22400 characters).
Abstract: Champs Bourcin black grape originated from
Aquitaine, France and planted in Sapa, Lao cai provice, exhibited
high total acidity (11.72 g/L). After 9 days of alcoholic fermentation
at 25oC using Saccharomyces cerevisiae UP3OY5 strain, the ethanol
concentration of wine was 11.5% v/v, however the sharp sour taste of
wine has been found. The malolactic fermentation (MLF) was carried
out by Oenococcus oeni ATCCBAA-1163 strain which had been preadapted
to acid (pH 3-4) and ethanol (8-12%v/v) conditions. We
obtained the highest vivability (83.2%) upon malolactic fermentation
after 5 days at 22oC with early stationary phase O. oeni cells preadapted
to pH 3.5 and 8% v/v ethanol in MRS medium. The malic
acid content in wine was decreased from 5.82 g/L to 0.02 g/L after
MLF (21 days at 22oC). The sensory quality of wine was
significantly improved.
Abstract: In this paper, the details of an experimental method to measure the clamping force value at bolted connections due to application of wrenching torque to tighten the nut have been presented. A simplified bolted joint including a holed plate with a single bolt was considered to carry out the experiments. This method was designed based on Hooke-s law by measuring compressive axial strain of a steel bush placed between the nut and the plate. In the experimental procedure, the values of clamping force were calculated for seven different levels of applied torque, and this process was repeated three times for each level of the torque. Moreover, the effect of lubrication of threads on the clamping value was studied using the same method. In both conditions (dry and lubricated threads), relation between the torque and the clamping force have been displayed in graphs.
Abstract: The authors report a case of swine urolithiasis caused
by improper administration of sulfamonomethoxine and which was
diagnosed by examination of urinary sediments and analyzing the
composition of the uroliths. The chemical composition of urinary
calculi obtained from affected pigs with urolithiasis was further
confimed as sulfamonomethoxine by fourier transform infrared
(FTIR). It is suggested that appearance of typical fanlike or wheat
bunchy crystals in urinary sediments under observation of lightmicroscope
and determination by FTIR for the crystals are helpful in
diagnosing sulfa calculi causced swine urolithiasis.
Abstract: The aim of this in vitro study was to evaluate the possible interference of a Nectandra membranacea extract (i) on the labeling of blood cells (BC), (ii) on the labeling process of BC and plasma (P) proteins with technetium-99m (Tc-99m) and (iii) on the morphology of red blood cells (RBC). Blood samples were incubated with a Nectandra membranacea crude extract, stannous chloride, Tc- 99m (sodium pertechnetate) was added, and soluble (SF) and insoluble (IF) fractions were isolated. Morphometry studies were performed with blood samples incubated with Nectandra membranacea extract. The results show that the Nectandra membranacea extract does not promote significant alteration of the labeling of BC, IF-P and IF-BC. The Nectandra membranacea extract was able to alter the erythrocyte membrane morphology, but these morphological changes were not capable to interfere on the labeling of blood constituents with Tc-99m.
Abstract: In networks, mainly small and medium-sized businesses benefit from the knowledge, experiences and solutions offered by experts from industry and science or from the exchange with practitioners. Associations which focus, among other things, on networking, information and knowledge transfer and which are interested in supporting such cooperations are especially well suited to provide such networks and the appropriate web platforms. Using METORA as an example – a project developed and run by the Federal Association for Information Economy, Telecommunications and New Media e.V. (BITKOM) for the Federal Ministry of Economics and Technology (BMWi) – This paper will discuss how associations and other network organizations can achieve this task and what conditions they have to consider.
Abstract: A novel PDE solver using the multidimensional wave
digital filtering (MDWDF) technique to achieve the solution of a 2D
seismic wave system is presented. In essence, the continuous physical
system served by a linear Kirchhoff circuit is transformed to an
equivalent discrete dynamic system implemented by a MD wave
digital filtering (MDWDF) circuit. This amounts to numerically
approximating the differential equations used to describe elements of a
MD passive electronic circuit by a grid-based difference equations
implemented by the so-called state quantities within the passive
MDWDF circuit. So the digital model can track the wave field on a
dense 3D grid of points. Details about how to transform the continuous
system into a desired discrete passive system are addressed. In
addition, initial and boundary conditions are properly embedded into
the MDWDF circuit in terms of state quantities. Graphic results have
clearly demonstrated some physical effects of seismic wave (P-wave
and S–wave) propagation including radiation, reflection, and
refraction from and across the hard boundaries. Comparison between
the MDWDF technique and the finite difference time domain (FDTD)
approach is also made in terms of the computational efficiency.
Abstract: Bovine viral diarrhea virus (BVDV) can cause lifelong
persistent infection. One reason for the phenomena is attributed to
BVDV infection to placenta tissue. However the mechanisms that
BVDV invades into placenta tissue remain unclear. To clarify the
molecular mechanisms, we investigated the possible means that
BVDV entered into bovine trophoblast cells (TPC). Yeast two-hybrid
system was used to identify proteins extracted from TPC, which
interact with BVDV envelope glycoprotein E2. A PGbkt7-E2 yeast
expression vector and TPC cDNA library were constructed. Through
two rounds of screening, three positive clones were identified.
Sequencing analysis indicated that all the three positive clones
encoded the same protein clathrin. Physical interaction between
clathrin and BVDV E2 protein was further confirmed by
coimmunoprecipitation experiments. This result suggested that the
clathrin might play a critical role in the process of BVDV entry into
placenta tissue and might be a novel antiviral target for preventing
BVDV infection.
Abstract: The new framework the Higher Education is
immersed in involves a complete change in the way lecturers must
teach and students must learn. Whereas the lecturer was the main
character in traditional education, the essential goal now is to
increase the students' participation in the process. Thus, one of the
main tasks of lecturers in this new context is to design activities of
different nature in order to encourage such participation. Seminars
are one of the activities included in this environment. They are active
sessions that enable going in depth into specific topics as support of
other activities. They are characterized by some features such as
favoring interaction between students and lecturers or improving
their communication skills. Hence, planning and organizing strategic
seminars is indeed a great challenge for lecturers with the aim of
acquiring knowledge and abilities. This paper proposes a method
using Artificial Intelligence techniques to obtain student profiles
from their marks and preferences. The goal of building such profiles
is twofold. First, it facilitates the task of splitting the students into
different groups, each group with similar preferences and learning
difficulties. Second, it makes it easy to select adequate topics to be a
candidate for the seminars. The results obtained can be either a
guarantee of what the lecturers could observe during the development
of the course or a clue to reconsider new methodological strategies in
certain topics.
Abstract: The objective of this paper was to designing a
ventilation system to enhance the performance of roof solar collector
(RSC) for reducing heat accumulation inside the house. The RSC has
1.8 m2 surface area made of CPAC monier roof tiles on the upper part
and gypsum board on the lower part. The space between CPAC
monier and gypsum board was fixed at 14 cm.
Ventilation system of modified roof solar collector (modified
RSC) consists of 9 tubes of 0.15m diameter and installed in the
lower part of RSC. Experimental result showed that the temperature
of the room, and attic temperature. The average temperature
reduction of room of house used modified RSC is about 2oC. and the
percentage of room temperature reduction varied between 0 to 10%.
Therefore, modified RSC is an interesting option in the sense that it
promotes solar energy and conserve energy.
Abstract: Road transportation system is the most important
method of transporting the goods. Considering the most suitable
geographical situation of Iran to transport the goods between Europe
and Asia and placement of this country in direction of international
corridors (east- west) , (north-south) and Asian land transport to
infrastructure development “A.L.T.I.D" and Transport corridor
Europe - Caucasus - Asia “T.R.A.C.E.C.A", noticing the security of
road transportation system in this country is so important. In this
paper the main factors of accidents on the roads of Iran are
categorized regarding the rate of accidents occurred. Then apart from
studying the main reasons of accidents of every category, the main
factors of these events are studied and its strategies in Iran are
introduced.
Abstract: The performance of adaptive beamforming degrades
substantially in the presence of steering vector mismatches. This
degradation is especially severe in the near-field, for the
3-dimensional source location is more difficult to estimate than the
2-dimensional direction of arrival in far-field cases. As a solution, a
novel approach of near-field robust adaptive beamforming (RABF) is
proposed in this paper. It is a natural extension of the traditional
far-field RABF and belongs to the class of diagonal loading
approaches, with the loading level determined based on worst-case
performance optimization. However, different from the methods
solving the optimal loading by iteration, it suggests here a simple
closed-form solution after some approximations, and consequently,
the optimal weight vector can be expressed in a closed form. Besides
simplicity and low computational cost, the proposed approach reveals
how different factors affect the optimal loading as well as the weight
vector. Its excellent performance in the near-field is confirmed via a
number of numerical examples.