Abstract: Learning programming is difficult for many learners. Some researches have found that the main difficulty relates to cognitive load. Cognitive overload happens in programming due to the nature of the subject which is intrinisicly over-bearing on the working memory. It happens due to the complexity of the subject itself. The problem is made worse by the poor instructional design methodology used in the teaching and learning process. Various efforts have been proposed to reduce the cognitive load, e.g. visualization softwares, part-program method etc. Use of many computer based systems have also been tried to tackle the problem. However, little success has been made to alleviate the problem. More has to be done to overcome this hurdle. This research attempts at understanding how cognitive load can be managed so as to reduce the problem of overloading. We propose a mechanism to measure the cognitive load during pre instruction, post instruction and in instructional stages of learning. This mechanism is used to help the instruction. As the load changes the instruction is made to adapt itself to ensure cognitive viability. This mechanism could be incorporated as a sub domain in the student model of various computer based instructional systems to facilitate the learning of programming.
Abstract: A synchronous network-on-chip using wormhole packet switching
and supporting guaranteed-completion best-effort with low-priority (LP)
and high-priority (HP) wormhole packet delivery service is presented in
this paper. Both our proposed LP and HP message services deliver a good
quality of service in term of lossless packet completion and in-order message
data delivery. However, the LP message service does not guarantee minimal
completion bound. The HP packets will absolutely use 100% bandwidth of
their reserved links if the HP packets are injected from the source node with
maximum injection. Hence, the service are suitable for small size messages
(less than hundred bytes). Otherwise the other HP and LP messages, which
require also the links, will experience relatively high latency depending on the
size of the HP message. The LP packets are routed using a minimal adaptive
routing, while the HP packets are routed using a non-minimal adaptive routing
algorithm. Therefore, an additional 3-bit field, identifying the packet type,
is introduced in their packet headers to classify and to determine the type
of service committed to the packet. Our NoC prototypes have been also
synthesized using a 180-nm CMOS standard-cell technology to evaluate the
cost of implementing the combination of both services.
Abstract: One of the mayor problems of programming a cruise
circuit is to decide which destinations to include and which don-t.
Thus a decision problem emerges, that might be solved using a linear
and goal programming approach. The problem becomes more
complex if several boats in the fleet must be programmed in a limited
schedule, trying their capacity matches best a seasonal demand and
also attempting to minimize the operation costs. Moreover, the
programmer of the company should consider the time of the
passenger as a limited asset, and would like to maximize its usage.
The aim of this work is to design a method in which, using linear and
goal programming techniques, a model to design circuits for the
cruise company decision maker can achieve an optimal solution
within the fleet schedule.
Abstract: Medical applications are among the most impactful
areas of microrobotics. The ultimate goal of medical microrobots is
to reach currently inaccessible areas of the human body and carry out
a host of complex operations such as minimally invasive surgery
(MIS), highly localized drug delivery, and screening for diseases at
their very early stages. Miniature, safe and efficient propulsion
systems hold the key to maturing this technology but they pose
significant challenges. A new type of propulsion developed recently,
uses multi-flagella architecture inspired by the motility mechanism of
prokaryotic microorganisms. There is a lack of efficient methods for
designing this type of propulsion system. The goal of this paper is to
overcome the lack and this way, a numerical strategy is proposed to
design multi-flagella propulsion systems. The strategy is based on the
implementation of the regularized stokeslet and rotlet theory, RFT
theory and new approach of “local corrected velocity". The effects of
shape parameters and angular velocities of each flagellum on overall
flow field and on the robot net forces and moments are considered.
Then a multi-layer perceptron artificial neural network is designed
and employed to adjust the angular velocities of the motors for
propulsion control. The proposed method applied successfully on a
sample configuration and useful demonstrative results is obtained.
Abstract: In this research, we have developed a new efficient
heuristic algorithm for the dynamic facility layout problem with
budget constraint (DFLPB). This heuristic algorithm combines two
mathematical programming methods such as discrete event
simulation and linear integer programming (IP) to obtain a near
optimum solution. In the proposed algorithm, the non-linear model
of the DFLP has been changed to a pure integer programming (PIP)
model. Then, the optimal solution of the PIP model has been used in
a simulation model that has been designed in a similar manner as the
DFLP for determining the probability of assigning a facility to a
location. After a sufficient number of runs, the simulation model
obtains near optimum solutions. Finally, to verify the performance of
the algorithm, several test problems have been solved. The results
show that the proposed algorithm is more efficient in terms of speed
and accuracy than other heuristic algorithms presented in previous
works found in the literature.
Abstract: Recognition of characters greatly depends upon the features used. Several features of the handwritten Arabic characters are selected and discussed. An off-line recognition system based on the selected features was built. The system was trained and tested with realistic samples of handwritten Arabic characters. Evaluation of the importance and accuracy of the selected features is made. The recognition based on the selected features give average accuracies of 88% and 70% for the numbers and letters, respectively. Further improvements are achieved by using feature weights based on insights gained from the accuracies of individual features.
Abstract: This paper presents a novel method for prediction of
the mechanical behavior of proximal femur using the general
framework of the quantitative computed tomography (QCT)-based
finite element Analysis (FEA). A systematic imaging and modeling
procedure was developed for reliable correspondence between the
QCT-based FEA and the in-vitro mechanical testing. A speciallydesigned
holding frame was used to define and maintain a unique
geometrical reference system during the analysis and testing. The
QCT images were directly converted into voxel-based 3D finite
element models for linear and nonlinear analyses. The equivalent
plastic strain and the strain energy density measures were used to
identify the critical elements and predict the failure patterns. The
samples were destructively tested using a specially-designed gripping
fixture (with five degrees of freedom) mounted within a universal
mechanical testing machine. Very good agreements were found
between the experimental and the predicted failure patterns and the
associated load levels.
Abstract: Formal Specification languages are being widely used
for system specification and testing. Highly critical systems such as
real time systems, avionics, and medical systems are represented
using Formal specification languages. Formal specifications based
testing is mostly performed using black box testing approaches thus
testing only the set of inputs and outputs of the system. The formal
specification language such as VDMµ can be used for white box
testing as they provide enough constructs as any other high level
programming language. In this work, we perform data and control
flow analysis of VDMµ class specifications. The proposed work is
discussed with an example of SavingAccount.
Abstract: Gilaburu (Viburnum opulus L.) grown naturally in
Anatolia. In this study, some physico-chemical (sugar, acid, protein,
crude fat, crude fiber, ash etc.) characteristics and mineral
composition of Gilaburu fruit have been investigated. The length,
width, thickness, weight, total soluble solid, protein, crude ash, crude
fiber and crude oil of fruit were found to be 1.12 cm, 1.58 cm, 1.87
cm, 0.87 g, 14.73 %, 0.2 %, 0.11 %, 6.56 % and 0.4 %, respectively.
The seed of fruit mean weight, length, width and thickness were
determinated as 0.08 g, 7.76 cm, 7.67 cm and 1.66, respectively. In
addition 27 mineral elements (Al, Mg, Na, Ba, Ca, Ni, Cd, P, Cr, Pb,
S, Cu, Se, Fe, K, Sr, Li, Z, V, Ag, Bi, Co, Mn, B, Ga, In, Ti) were
analyzed. Gilaburu (Viburnum opulus L.) fruit was richest in
potassium (10764.764 ppm), Mg (1289.088 ppm) and P (1304.169
ppm).
Abstract: Animated graph gives some good impressions in
presenting information. However, not many people are able to produce it because the process of generating an animated graph requires some technical skills. This work presents Content
Management System with Animated Graph (CMS-AG). It is a webbased system enabling users to produce an effective and interactive
graphical report in a short time period. It allows for three levels of user authentication, provides update profile, account management, template management, graph management, and track changes. The system development applies incremental development approach, object-oriented concepts and Web programming technologies. The design architecture promotes new technology of reporting. It also helps user cut off unnecessary expenses, save time and learn new things on different levels of users. In this paper, the developed system is described.
Abstract: Thermal-driven refrigeration systems have attracted increasing research and development interest in recent years. These systems do not cause ozone depletion and can reduce demand on electricity. The main objective of this work is to perform theoretical analyses of a thermal-driven refrigeration system using a new sorbent-sorptive pair as the working pair. The active component of sorbent is sodium thiocyanate (NaSCN). Ammonia (NH3) is chosen as sorptive. Based on the thermodynamic properties of the working solution, a mathematical model is introduced to analyze the system characteristics and performance. The results are used to compare with other thermal-driven refrigeration systems. It is shown that the advantages provided by this system over other absorption units include lower generator and evaporator temperatures, a higher coefficient of performance (COP). The COP is about 10 percent higher than the ones for the NH3-H2O system working at the same conditions.
Abstract: Horizontal wells are proven to be better producers
because they can be extended for a long distance in the pay zone.
Engineers have the technical means to forecast the well productivity
for a given horizontal length. However, experiences have shown that
the actual production rate is often significantly less than that of
forecasted. It is a difficult task, if not impossible to identify the real
reason why a horizontal well is not producing what was forecasted.
Often the source of problem lies in the drilling of horizontal section
such as permeability reduction in the pay zone due to mud invasion
or snaky well patterns created during drilling. Although drillers aim
to drill a constant inclination hole in the pay zone, the more frequent
outcome is a sinusoidal wellbore trajectory. The two factors, which
play an important role in wellbore tortuosity, are the inclination and
side force at bit. A constant inclination horizontal well can only be
drilled if the bit face is maintained perpendicular to longitudinal axis
of bottom hole assembly (BHA) while keeping the side force nil at
the bit. This approach assumes that there exists no formation force at
bit. Hence, an appropriate BHA can be designed if bit side force and
bit tilt are determined accurately. The Artificial Neural Network
(ANN) is superior to existing analytical techniques. In this study, the
neural networks have been employed as a general approximation tool
for estimation of the bit side forces. A number of samples are
analyzed with ANN for parameters of bit side force and the results
are compared with exact analysis. Back Propagation Neural network
(BPN) is used to approximation of bit side forces. Resultant low
relative error value of the test indicates the usability of the BPN in
this area.
Abstract: This study investigated possible ways to improve the
efficiency of the platinum precipitation process using ammonium
chloride by reducing the platinum content reporting to the effluent.
The ore treated consist of five platinum group metals namely,
ruthenium, rhodium, iridium, platinum, palladium and a precious
metal gold. Gold, ruthenium, rhodium and iridium were extracted
prior the platinum precipitation process. Temperature, reducing
agent, flow rate and potential difference were the variables controlled
to determine the operation conditions for optimum platinum
precipitation efficiency. Hydrogen peroxide was added as the
oxidizing agent at the temperature of 85-90oC and potential
difference of 700-850mV was the variable used to check the
oxidizing state of platinum. The platinum was further purified at
temperature between 60-65oC, potential difference above 700 mV,
ammonium chloride of 200 l, and at these conditions the platinum
content reporting to the effluent was reduced to less than 300ppm,
resulting in optimum platinum precipitation efficiency and purity of
99.9%.
Abstract: In this paper, Exp-function method is used for some exact solitary solutions of the generalized Pochhammer-Chree equation. It has been shown that the Exp-function method, with the help of symbolic computation, provides a very effective and powerful mathematical tool for solving nonlinear partial differential equations. As a result, some exact solitary solutions are obtained. It is shown that the Exp-function method is direct, effective, succinct and can be used for many other nonlinear partial differential equations.
Abstract: EEG signal is one of the oldest measures of brain
activity that has been used vastly for clinical diagnoses and
biomedical researches. However, EEG signals are highly
contaminated with various artifacts, both from the subject and from
equipment interferences. Among these various kinds of artifacts,
ocular noise is the most important one. Since many applications such
as BCI require online and real-time processing of EEG signal, it is
ideal if the removal of artifacts is performed in an online fashion.
Recently, some methods for online ocular artifact removing have
been proposed. One of these methods is ARMAX modeling of EEG
signal. This method assumes that the recorded EEG signal is a
combination of EOG artifacts and the background EEG. Then the
background EEG is estimated via estimation of ARMAX parameters.
The other recently proposed method is based on adaptive filtering.
This method uses EOG signal as the reference input and subtracts
EOG artifacts from recorded EEG signals. In this paper we
investigate the efficiency of each method for removing of EOG
artifacts. A comparison is made between these two methods. Our
undertaken conclusion from this comparison is that adaptive filtering
method has better results compared with the results achieved by
ARMAX modeling.
Abstract: A lot of matching algorithms with different characteristics have been introduced in recent years. For real time systems these algorithms are usually based on minutiae features. In this paper we introduce a novel approach for feature extraction in which the extracted features are independent of shift and rotation of the fingerprint and at the meantime the matching operation is performed much more easily and with higher speed and accuracy. In this new approach first for any fingerprint a reference point and a reference orientation is determined and then based on this information features are converted into polar coordinates. Due to high speed and accuracy of this approach and small volume of extracted features and easily execution of matching operation this approach is the most appropriate for real time applications.
Abstract: This paper considers the (2+1)-dimensional breaking soliton equation in its bilinear form. Some exact solutions to this equation are explicitly derived by the idea of three-wave solution method with the assistance of Maple. We can see that the new idea is very simple and straightforward.
Abstract: Nitrogen loss from irrigated cropland, particularly
sandy soils, significantly contributes to nitrate (NO3
-) levels in
surface and groundwaters. Thus, it is of great interest to use
inexpensive natural products that can increase the fertilizer efficiency
and decrease nitrate leaching. In this study, the ability of natural
Iranian zeolite clinoptilolite (Cp) and surfactant modified zeolite
clinoptilolite (SMZ) to remove NH4
+ and NO3
-, respectively, from
aqueous solutions was determined. The feasibility of using Cp and
SMZ as soil amendment to reduce nitrate leaching from soil using
lysimeters was also investigated. Zeolite showed 10.23% to 88.42%
NH4
+ removal efficiency over a wide range of initial NH4
+
concentrations. Nitrate removal efficiency by SMZ was 32.26% to
82.26%. Field study results showed that Cp and SMZ significantly (p
< 0.05) reduced leachate NO3-N concentration compared to control.
There was no significant difference between maximum and mean
leachate NO3-N concentration of SMZ lysimeters and those of Cp
lysimeters.
Abstract: This paper evaluates the performance of a novel
algorithm for tracking of a mobile node, interms of execution time
and root mean square error (RMSE). Particle Filter algorithm is used
to track the mobile node, however a new technique in particle filter
algorithm is also proposed to reduce the execution time. The
stationary points were calculated through trilateration and finally by
averaging the number of points collected for a specific time, whereas
tracking is done through trilateration as well as particle filter
algorithm. Wi-Fi signal is used to get initial guess of the position of
mobile node in x-y coordinates system. Commercially available
software “Wireless Mon" was used to read the WiFi signal strength
from the WiFi card. Visual Cµ version 6 was used to interact with
this software to read only the required data from the log-file
generated by “Wireless Mon" software. Results are evaluated through
mathematical modeling and MATLAB simulation.
Abstract: This paper presents the design, development and characterization of contractile water jet thruster (CWJT) for mini underwater robot. Instead of electric motor, this CWJT utilizes the Ionic Polymer Metal Composite (IPMC) as the actuator to generate the water jet. The main focus of this paper is to analyze the conceptual design of the proposed CWJT which would determine the thrust force value, jet flow behavior and actuator’s stress. Those thrust force and jet flow studies were carried out using Matlab/Simscape simulation software. The actuator stress had been analyzed using COSMOS simulation software. The results showed that there was no significant change for jet velocity at variable cross sectional nozzle area. However, a significant change was detected for jet velocity at different nozzle cross sectional area ratio which was up to 37%. The generated thrust force has proportional relation to the nozzle cross sectional area.