Abstract: Simulation is a very powerful method used for highperformance
and high-quality design in distributed system, and now
maybe the only one, considering the heterogeneity, complexity and
cost of distributed systems. In Grid environments, foe example, it is
hard and even impossible to perform scheduler performance
evaluation in a repeatable and controllable manner as resources and
users are distributed across multiple organizations with their own
policies. In addition, Grid test-beds are limited and creating an
adequately-sized test-bed is expensive and time consuming.
Scalability, reliability and fault-tolerance become important
requirements for distributed systems in order to support distributed
computation. A distributed system with such characteristics is called
dependable. Large environments, like Cloud, offer unique
advantages, such as low cost, dependability and satisfy QoS for all
users. Resource management in large environments address
performant scheduling algorithm guided by QoS constrains. This
paper presents the performance evaluation of scheduling heuristics
guided by different optimization criteria. The algorithms for
distributed scheduling are analyzed in order to satisfy users
constrains considering in the same time independent capabilities of
resources. This analysis acts like a profiling step for algorithm
calibration. The performance evaluation is based on simulation. The
simulator is MONARC, a powerful tool for large scale distributed
systems simulation. The novelty of this paper consists in synthetic
analysis results that offer guidelines for scheduler service
configuration and sustain the empirical-based decision. The results
could be used in decisions regarding optimizations to existing Grid
DAG Scheduling and for selecting the proper algorithm for DAG
scheduling in various actual situations.
Abstract: This paper deals with a design method of a discrete
modified Internal Model Control (IMC) for a plant with an integrator
and dead time. If there is a load disturbance in the input or output side
of the plant, the proposed control system can eliminate the steady-state
error caused by it. The disturbance compensator in this method is
simple and its order is low regardless of that of a plant. The simulation
studies show that the proposed method has superior performance for a
load disturbance rejection and robustness.
Abstract: This study describes a micro device integrated with
multi-chamber for polymerase chain reaction (PCR) with different
annealing temperatures. The device consists of the reaction
polydimethylsiloxane (PDMS) chip, a cover glass chip, and is
equipped with cartridge heaters, fans, and thermocouples for
temperature control. In this prototype, commercial software is utilized
to determine the geometric and operational parameters those are
responsible for creating the denaturation, annealing, and extension
temperatures within the chip. Two cartridge heaters are placed at two
sides of the chip and maintained at two different temperatures to
achieve a thermal gradient on the chip during the annealing step. The
temperatures on the chip surface are measured via an infrared imager.
Some thermocouples inserted into the reaction chambers are used to
obtain the transient temperature profiles of the reaction chambers
during several thermal cycles. The experimental temperatures
compared to the simulated results show a similar trend. This work
should be interesting to persons involved in the high-temperature
based reactions and genomics or cell analysis.
Abstract: Consumer behaviour analysis represents an important
field of study in marketing. Particularly strategy development for
marketing and communications will be more focused and effective
when marketers have an understanding of the motivations, behaviour
and psychology of consumers. While materialism has been found to
be one of the important elements in consumer behaviour, compulsive
consumption represents another aspect that has recently attracted
more attention. This is because of the growing prevalence of
dysfunctional buying that has raised concern in consumer societies.
Present studies and analyses on origins and motivations of
compulsive buying have mainly focused on either individual factors
or groups of related factors and hence a need for a holistic view
exists. This paper provides a comprehensive perspective on
compulsive consumption and establishes relevant propositions
keeping the family life cycle stages as a reference for the incidence of
chronic consumer states and their influence on compulsive
consumption.
Abstract: One astonishing capability of humans is to recognize thousands of different objects visually, and to learn the semantic association between those objects and words referring to them. This work is an attempt to build a computational model of such capacity,simulating the process by which infants learn how to recognize objects and words through exposure to visual stimuli and vocal sounds.One of the main fact shaping the brain of a newborn is that lights and colors come from entities of the world. Gradually the visual system learn which light sensations belong to same entities, despite large changes in appearance. This experience is common between humans and several other mammals, like non-human primates. But humans only can recognize a huge variety of objects, most manufactured by himself, and make use of sounds to identify and categorize them. The aim of this model is to reproduce these processes in a biologically plausible way, by reconstructing the essential hierarchy of cortical circuits on the visual and auditory neural paths.
Abstract: It has become crucial over the years for nations to
improve their credit scoring methods and techniques in light of the
increasing volatility of the global economy. Statistical methods or
tools have been the favoured means for this; however artificial
intelligence or soft computing based techniques are becoming
increasingly preferred due to their proficient and precise nature and
relative simplicity. This work presents a comparison between Support
Vector Machines and Artificial Neural Networks two popular soft
computing models when applied to credit scoring. Amidst the
different criteria-s that can be used for comparisons; accuracy,
computational complexity and processing times are the selected
criteria used to evaluate both models. Furthermore the German credit
scoring dataset which is a real world dataset is used to train and test
both developed models. Experimental results obtained from our study
suggest that although both soft computing models could be used with
a high degree of accuracy, Artificial Neural Networks deliver better
results than Support Vector Machines.
Abstract: This paper is concerned with propagation of thermoelastic longitudinal vibrations of an infinite circular cylinder, in the context of the linear theory of generalized thermoelasticity with two relaxation time parameters (Green and Lindsay theory). Three displacement potential functions are introduced to uncouple the equations of motion. The frequency equation, by using the traction free boundary conditions, is given in the form of a determinant involving Bessel functions. The roots of the frequency equation give the value of the characteristic circular frequency as function of the wave number. These roots, which correspond to various modes, are numerically computed and presented graphically for different values of the thermal relaxation times. It is found that the influences of the thermal relaxation times on the amplitudes of the elastic and thermal waves are remarkable. Also, it is shown in this study that the propagation of thermoelastic longitudinal vibrations based on the generalized thermoelasticity can differ significantly compared with the results under the classical formulation. A comparison of the results for the case with no thermal effects shows well agreement with some of the corresponding earlier results.
Abstract: This paper attempts to discuss the spam issue from the Malaysian e-mail users- perspective. The purpose is to discover how Malaysian users handle the spam e-mail problem. From the experiences we hope to discover the necessary effort needed to be undertaken to face this problem in the context of Malaysia. A survey was conducted to understand how Malaysian individual perceived spam and what they actually do with the spam e-mail they received in their daily life. The findings indicate that the level of awareness on spam issue in action is still low and need some extra effort by government and relevant agencies to increase their level of awareness.
Abstract: Social cognitive theory explains the power to inaugurate change is determined by the mutual influence of personal proclivity and social factors which will shape ones- motivations and expectations. In construction industry, green concept offers an opportunity to leave a lighter footprint on the environment. This opportunity, however, has not been fully grasped by many countries. As such, venturing into green construction for many practitioners would be their maiden experience. Decision to venture into new practice such as green construction will be influenced by certain drivers. This paper explores these drivers which is further expanded into motivational factors and later becomes the platform upon which expectation for green construction stands. This theoretical concept of motivation and expectations, which is adapted from social cognitive theory, focus on developers- view because of their crucial role in green application. This conceptual framework, which serves as the basis for further research, will benefit the industry as it elucidate cognitive angles to attract more new entrants to green business.
Abstract: This paper presents two prototypes of low power low voltage current mode 9 bit pipelined a/d converters. The first and the second converters are configured of 1.5 bit and 2.5 bit stages, respectively. The a/d converter structures are composed of current mode building blocks and final comparator block which converts the analog current signal into digital voltage signal. All building blocks have been designed in CMOS AMS 0.35μm technology, then simulated to verify proposed concept. The performances of both converters are compared to performances of known current mode and voltage mode switched capacitance converter structures. Low power consumption and small chip area are advantages of the proposed converters.
Abstract: If there exists a nonempty, proper subset S of the set of all (n + 1)(n + 2)/2 inertias such that S Ôèå i(A) is sufficient for any n × n zero-nonzero pattern A to be inertially arbitrary, then S is called a critical set of inertias for zero-nonzero patterns of order n. If no proper subset of S is a critical set, then S is called a minimal critical set of inertias. In [3], Kim, Olesky and Driessche identified all minimal critical sets of inertias for 2 × 2 zero-nonzero patterns. Identifying all minimal critical sets of inertias for n × n zero-nonzero patterns with n ≥ 3 is posed as an open question in [3]. In this paper, all minimal critical sets of inertias for 3 × 3 zero-nonzero patterns are identified. It is shown that the sets {(0, 0, 3), (3, 0, 0)}, {(0, 0, 3), (0, 3, 0)}, {(0, 0, 3), (0, 1, 2)}, {(0, 0, 3), (1, 0, 2)}, {(0, 0, 3), (2, 0, 1)} and {(0, 0, 3), (0, 2, 1)} are the only minimal critical sets of inertias for 3 × 3 irreducible zerononzero patterns.
Abstract: This paper presents a Reliability-Based Topology
Optimization (RBTO) based on Evolutionary Structural Optimization
(ESO). An actual design involves uncertain conditions such as
material property, operational load and dimensional variation.
Deterministic Topology Optimization (DTO) is obtained without
considering of the uncertainties related to the uncertainty parameters.
However, RBTO involves evaluation of probabilistic constraints,
which can be done in two different ways, the reliability index
approach (RIA) and the performance measure approach (PMA). Limit
state function is approximated using Monte Carlo Simulation and
Central Composite Design for reliability analysis. ESO, one of the
topology optimization techniques, is adopted for topology
optimization. Numerical examples are presented to compare the DTO
with RBTO.
Abstract: DG application has received increasing attention during
recent years. The impact of DG on various aspects of distribution system
operation, such as reliability and energy loss, depend highly on DG
location in distribution feeder. Optimal DG placement is an important
subject which has not been fully discussed yet.
This paper presents an optimization method to determine optimal DG
placement, based on a cost/worth analysis approach. This method
considers technical and economical factors such as energy loss, load point
reliability indices and DG costs, and particularly, portability of DG. The
proposed method is applied to a test system and the impacts of different
parameters such as load growth rate and load forecast uncertainty (LFU)
on optimum DG location are studied.
Abstract: In view of geological origin, formation of the shallow
gas reservoir of the Hangzhou Bay, northern Zhejiang Province,
eastern China, and original occurrence characteristics of the gassy
sand are analyzed. Generally, gassy sand in scale gas reservoirs is in
the state of residual moisture content and the approximate scope of
initial matric suction of sand ranges about from 0kPa to100kPa.
Results based on GDS triaxial tests show that the classical shear
strength formulas of unsaturated soil can not effectively describe basic
strength characteristics of gassy sand; the relationship between
apparent cohesion and matric suction of gassy sand agrees well with
the power function, which can reasonably be used to describe the
strength of gassy sand. In the stress path of gas release, shear strength
of gassy sand will increase and experimental results show the formula
proposed in this paper can effectively predict the strength increment.
When saturated strength indexes of the sand are used in engineering
design, moderate reduction should be considered.
Abstract: LSP routing is among the prominent issues in MPLS
networks traffic engineering. The objective of this routing is to
increase number of the accepted requests while guaranteeing the
quality of service (QoS). Requested bandwidth is the most important
QoS criterion that is considered in literatures, and a various number
of heuristic algorithms have been presented with that regards. Many
of these algorithms prevent flows through bottlenecks of the network
in order to perform load balancing, which impedes optimum
operation of the network. Here, a modern routing algorithm is
proposed as MIRAD: having a little information of the network
topology, links residual bandwidth, and any knowledge of the
prospective requests it provides every request with a maximum
bandwidth as well as minimum end-to-end delay via uniform load
distribution across the network. Simulation results of the proposed
algorithm show a better efficiency in comparison with similar
algorithms.
Abstract: For several high speed networks, providing resilience against failures is an essential requirement. The main feature for designing next generation optical networks is protecting and restoring high capacity WDM networks from the failures. Quick detection, identification and restoration make networks more strong and consistent even though the failures cannot be avoided. Hence, it is necessary to develop fast, efficient and dependable fault localization or detection mechanisms. In this paper we propose a new fault localization algorithm for WDM networks which can identify the location of a failure on a failed lightpath. Our algorithm detects the failed connection and then attempts to reroute data stream through an alternate path. In addition to this, we develop an algorithm to analyze the information of the alarms generated by the components of an optical network, in the presence of a fault. It uses the alarm correlation in order to reduce the list of suspected components shown to the network operators. By our simulation results, we show that our proposed algorithms achieve less blocking probability and delay while getting higher throughput.
Abstract: Today, advantage of biotechnology especially in environmental issues compared to other technologies is irrefragable. Kimia Gharb Gostar Industries Company, as a largest producer of citric acid in Middle East, applies biotechnology for this goal. Citrogypsum is a by–product of citric acid production and it considered as a valid residuum of this company. At this paper summary of acid citric production and condition of Citrogypsum production in company were introduced in addition to defmition of Citrogypsum production and its applications in world. According to these information and evaluation of present conditions about Iran needing to Citrogypsum, the best priority was introduced and emphasized on strategy selection and proper programming for self-sufficiency. The Delphi technique was used to elicit expert opinions about criteria for evaluating the usages. The criteria identified by the experts were profitability, capacity of production, the degree of investment, marketable, production ease and time production. The Analytical Hierarchy Process (ARP) and Expert Choice software were used to compare the alternatives on the criteria derived from the Delphi process.
Abstract: In this paper, an attempt is made to compute the total
optimal cost of interdependent queuing system with controllable
arrival rates as an important performance measure of the system. An
example of application has also been presented to exhibit the use of
the model. Finally, numerical demonstration based on a computing
algorithm and variational effects of the model with the help of the
graph have also been presented.
Abstract: Solving Ordinary Differential Equations (ODEs) by
using Partitioning Block Intervalwise (PBI) technique is our aim in
this paper. The PBI technique is based on Block Adams Method and
Backward Differentiation Formula (BDF). Block Adams Method
only use the simple iteration for solving while BDF requires Newtonlike
iteration involving Jacobian matrix of ODEs which consumes a
considerable amount of computational effort. Therefore, PBI is
developed in order to reduce the cost of iteration within acceptable
maximum error
Abstract: With the rapid growth and development of information and communication technology, the Internet has played a definite and irreplaceable role in people-s social lives in Taiwan like in other countries. In July 2008, on a general social website, an unexpected phenomenon was noticed – that there were more than one hundred users who started forming clubs voluntarily and having face-to-face gatherings for specific purposes. In this study, it-s argued whether or not teenagers- social contact on the Internet is involved in their life context, and tried to reveal the teenagers- social preferences, values, and needs, which merge with and influence teenagers- social activities. Therefore, the study conducts multiple user experience research methods, which include practical observations and qualitative analysis by contextual inquiries and in-depth interviews. Based on the findings, several design implications for software related to social interactions and cultural inheritance are offered. It is concluded that the inherent values of a social behaviors might be a key issue in developing computer-mediated communication or interaction designs in the future.