Abstract: For a quick and accurate calculation of spatial neutron
distribution in nuclear power reactors 3D nodal codes are usually
used aiming at solving the neutron diffusion equation for a given
reactor core geometry and material composition. These codes use a
second order polynomial to represent the transverse leakage term. In
this work, a nodal method based on the well known nodal expansion
method (NEM), developed at COPPE, making use of this polynomial
expansion was modified to treat the transverse leakage term for the
external surfaces of peripheral reflector nodes.
The proposed method was implemented into a computational
system which, besides solving the diffusion equation, also solves the
burnup equations governing the gradual changes in material
compositions of the core due to fuel depletion. Results confirm the
effectiveness of this modified treatment of peripheral nodes for
practical purposes in PWR reactors.
Abstract: The use of sewage sludge and effluents from
wastewater treatment plants for irrigation of agricultural lands is on
the rise particularly in peri-urban areas of developing countries.
The reuse of nutrients and organic matter in treated wastewater
and sewage sludge via land application is a desirable goal. However,
trace or heavy metals present in sludge pose the risk of human or
phytotoxicity from land application. Long-term use of sewage
sludge, heavy metals can accumulate to phytotoxic levels and results
in reduced plants growth and/or enhanced metal concentrations in
plants, which consumed by animals then enter the food chain. In this
research, the amount of heavy metals was measured in plants
irrigated with wastewater and sludge application. For this purpose,
three pilots were made in a Shush treatment plant in south of Tehran.
Three plants species, spinach, lettuce and radish were selected and
planted in the pilots.First pilot was irrigated just with wastewater of
treatment plant and second pilot was irrigated with wastewater and
sludge application .Third pilot was irrigated with simulated heavy
metals solution equal 50 years of irrigation. The results indicate that
the average of amount of heavy metals Pb, Cd in three plant species
in first pilot were lower than permissible limits .In second pilot,
Cadmium accumulations are high in three species plants and more
than the standard limits. Concentration of Cd , Pb have exceed their
permitted limits in plants in third pilot . It was concluded that the use
of wastewater and sludge application in agricultural lands enriched
soils with heavy metals to concentrations that may pose potential
environmental and health risks in the long-term.
Abstract: Present study summarizes the control of Vibrio
alginolyticus infection in hatchery reared Clownfish, Amphiprion
sebae with the extract of the mangrove plant, Avicennia marina.
Fishes with visible symptoms of hemorrhagic spots were chosen and
the genomic DNA of the causative bacterium was isolated and
sequenced based on 16S rDNA gene. The in vitro assay revealed that
a fraction of A. marina leaf extract elucidated with ethyl acetate:
methanol (6:4) showed a high activity (28 mm) at 125 μg/ml
concentrations. About 4 % of the fraction fed along with live V.
alginolyticus was significantly decreased the cumulative mortality
(P
Abstract: Linear convolutive filters are fast in calculation and in application, and thus, often used for real-time processing of continuous data streams. In the case of transient signals, a filter has not only to detect the presence of a specific waveform, but to estimate its arrival time as well. In this study, a measure is presented which indicates the performance of detectors in achieving both of these tasks simultaneously. Furthermore, a new sub-class of linear filters within the class of filters which minimize the quadratic response is proposed. The proposed filters are more flexible than the existing ones, like the adaptive matched filter or the minimum power distortionless response beamformer, and prove to be superior with respect to that measure in certain settings. Simulations of a real-time scenario confirm the advantage of these filters as well as the usefulness of the performance measure.
Abstract: The aim of this study was to evaluate the effect of preexercise glycerol hyperhydration on endurance performance in a heat chamber designed to simulate the World Championship Distance (WCD) duathlon (10km run, 40km ride, 5 km run). Duathlons are often performed in hot and humid conditions and as a result hydration is a major issue. Glycerol enhances the body’s capacity for fluid retention by inducing hyperhydration, which is theorized to improve thermoregulatory and cardiovascular responses, and thereby improve performance. Six well-trained athletes completed the testing protocol in a heat chamber at the La Trobe University Exercise Physiology Laboratory. Each testing session was approximately 4.5 hours in duration (2 hours of pre-exercise glycerol hyper-hydration followed by approximately 2.5 hours of exercise). The results showed an increased water retention pre-exercise and an improved overall performance of 2.04% was achieved by subjects ingesting the glycerol solution.
Abstract: As a by-product of its "cyberspace" status, electronic
commerce is global, encompassing a whole range of B2C
relationships which need to be approached with solutions provided at
a local level while remaining viable when applied to global issues.
Today, the European Union seems to be endowed with a reliable
legal framework for consumer protection. A question which remains,
however, is enforcement of this protection. This is probably a matter
of time and awareness from both parties in the B2C relationship.
Business should realize that enhancing trust in the minds of
consumers is more than a question of technology; it is a question of
best practice. Best practice starts with the online service of high
street banks as well as with the existence of a secure, user-friendly
and cost-effective payment system. It also includes the respect of
privacy and the use of smart cards as well as enhancing privacy
technologies and fair information practice. In sum, only by offering
this guarantee of privacy and security will the consumer be assured
that, in cyberspace, his/her interests will be protected in the same
manner as in a traditional commercial environment.
Abstract: recurrent neural network (RNN) is an efficient tool for
modeling production control process as well as modeling services. In
this paper one RNN was combined with regression model and were
employed in order to be checked whether the obtained data by the
model in comparison with actual data, are valid for variable process
control chart. Therefore, one maintenance process in workshop of
Esfahan Oil Refining Co. (EORC) was taken for illustration of
models. First, the regression was made for predicting the response
time of process based upon determined factors, and then the error
between actual and predicted response time as output and also the
same factors as input were used in RNN. Finally, according to
predicted data from combined model, it is scrutinized for test values
in statistical process control whether forecasting efficiency is
acceptable. Meanwhile, in training process of RNN, design of
experiments was set so as to optimize the RNN.
Abstract: This text studies glass bottle intelligent inspector
based machine vision instead of manual inspection. The system
structure is illustrated in detail in this paper. The text presents the
method based on watershed transform methods to segment the
possible defective regions and extract features of bottle wall by rules.
Then wavelet transform are used to exact features of bottle finish
from images. After extracting features, the fuzzy support vector
machine ensemble is putted forward as classifier. For ensuring that
the fuzzy support vector machines have good classification ability,
the GA based ensemble method is used to combining the several
fuzzy support vector machines. The experiments demonstrate that
using this inspector to inspect glass bottles, the accuracy rate may
reach above 97.5%.
Abstract: Al-Murabahah is an Islamic financing facility used in
asset financing, the profit rate of the contract is determined by
components which are also being used in the conventional banking.
Such are cost of fund, overhead cost, risk premium cost and bank-s
profit margin. At the same time, the profit rate determined by Islamic
banking system also refers to Inter-Bank Offered Rate (LIBOR) in
London as a benchmark. This practice has risen arguments among
Muslim scholars in term of its validity of the contract; whether the
contract maintains the Shariah compliance or not. This paper aims to
explore the view of Shariah towards the above components practiced
by Islamic Banking in determining the profit rate of al-murabahah
asset financing in Malaysia. This is a comparative research which
applied the views of Muslim scholars from all major mazahibs in
Islamic jurisprudence and examined the practices by Islamic banks in
Malaysia for the above components. The study found that the shariah
accepts all the components with conditions. The cost of fund is
accepted as a portion of al-mudarabah-s profit, the overhead cost is
accepted as a cost of product, risk premium cost consist of business
risk and mitigation risk are accepted through the concept of alta-awun
and bank-s profit margin is accepted as a right of bank after
venturing in risky investment.
Abstract: Lightweight ceramic materials in the form of bricks
and blocks are widely used in modern construction. They may be
obtained by adding of rice husk, rye straw, etc, as porous forming
materials. Rice husk is a major by-product of the rice milling
industry. Its utilization as a valuable product has always been a
problem. Various technologies for utilization of rice husk through
biological and thermochemical conversion are being developed.
The purpose of this work is to develop lightweight ceramic
materials with clay matrix and filler of rice husk and examine their
main physicomechanical properties. The results obtained allow to
suppose that the materials synthesized on the basis of waste materials
can be used as lightweight materials for construction purpose.
Abstract: This paper reports a new application of material accounting techniques to characterise and quantify material stocks and flows at the “neighbourhood" scale. The study area is the main campus of the University of New South Wales in Sydney, Australia. The system boundary is defined by the urban structural unit (USU), a typological construct devised to facilitate assessment of the metabolism of urban systems. A streamlined material flow analysis (MFA) was applied to quantify the stocks and flows of key construction materials within the campus USU over time, drawing on empirical data from a major campus development project. The results are reviewed to assess the efficacy of the method in supporting urban environmental evaluation and design practice, for example to facilitate estimation of significant impacts such as greenhouse gas emissions. It is concluded that linking a service (in this case, teaching students) enabled by a given product (university buildings) to the amount of materials used in creating that product offers a potential way to reduce the environmental impact of that service, through more efficient use of materials.
Abstract: A phenomenological model for species spreading which incorporates the Allee effect, a species- maximum attainable growth rate, collective dispersal rate and dispersal adaptability is presented. This builds on a well-established reaction-diffusion model for spatial spreading of invading organisms. The model is phrased in terms of the “hostility" (which quantifies the Allee threshold in relation to environmental sustainability) and dispersal adaptability (which measures how a species is able to adapt its migratory response to environmental conditions). The species- invading/retreating speed and the sharpness of the invading boundary are explicitly characterised in terms of the fundamental parameters, and analysed in detail.
Abstract: The objective of this contribution is to study the
performances in terms of bit error rate, of space-time code algorithms
applied to MIMO communication in tunnels. Indeed, the channel
characteristics in a tunnel are quite different than those of urban or
indoor environment, due to the guiding effect of the tunnel.
Therefore, MIMO channel matrices have been measured in a straight
tunnel, in a frequency band around 3GHz. Correlation between array
elements and properties of the MIMO matrices are first studied as a
function of the distance between the transmitter and the receiver.
Then, owing to a software tool simulating the link, predicted values
of bit error rate are given for VLAST, OSTBC and QSTBC
algorithms applied to a MIMO configuration with 2 or 4 array
elements. Results are interpreted from the analysis of the channel
properties.
Abstract: In this work, we treat the problems related to chemical and petrochemical plants of a certain complex process taking the centrifugal compressor as an example, a system being very complex by its physical structure as well as its behaviour (surge phenomenon). We propose to study the application possibilities of the recent control approaches to the compressor behaviour, and consequently evaluate their contribution in the practical and theoretical fields. Facing the studied industrial process complexity, we choose to make recourse to fuzzy logic for analysis and treatment of its control problem owing to the fact that these techniques constitute the only framework in which the types of imperfect knowledge can jointly be treated (uncertainties, inaccuracies, etc..) offering suitable tools to characterise them. In the particular case of the centrifugal compressor, these imperfections are interpreted by modelling errors, the neglected dynamics, no modelisable dynamics and the parametric variations. The purpose of this paper is to produce a total robust nonlinear controller design method to stabilize the compression process at its optimum steady state by manipulating the gas rate flow. In order to cope with both the parameter uncertainty and the structured non linearity of the plant, the proposed method consists of a linear steady state regulation that ensures robust optimal control and of a nonlinear compensation that achieves the exact input/output linearization.
Abstract: The environmental performance of rapeseed oil (RO)
and rapeseed methyl ester(RME) from winter rape as fuels produced
in Romanian agroclimate is analyzed in this paper. The proposed
methodology is life cycle assessment (LCA) and takes into
consideration the influence of grain production and agroclimatic
conditions. This study shows favorable results first for RO and then
for RME. When compared to diesel fuel, both studied biofuels show
better results in the following impact categories: Abiotic depletion
potential (ADP), Ozone layer depletion (ODP) and Photochemical
ozone creation potential (POCP).Furthermore, the environmental
performance of the two biofuels studied can be improved by
changing the type of fertilizer used and also by using biofuels instead
of diesel in the field works.
Abstract: The shelf life of fish was extended using disinfection
properties of ozone. For this purpose, Trout specimens were exposed
to ozone in the aqueous media for two hours and their microbial
growth and biochemical properties were measured over time.
Microbial growth of ozone treated fish was significantly slower than
control sample, resulting in lower counts of bacteria. According to
the biochemical tests; ozone treatment had no negative effects on fat,
protein and humidity of fish. Peroxide and TVN (Total Volatile
Nitrogen) measurements showed that treatment by ozone increased
the trout shelf life from 4 days to 6 days. According to the sensory
analysis, no changes were observed in color or flavor of the ozone
treated trout.
Abstract: As there has been a recognizable transition in
automotive industry from mass production to mass customization,
automobile manufacturers and their suppliers have been seeking ways
for more flexible and efficient processes. Eventually, modular
production is currently being applied to manage the changing orders of
the industry. In this paper, two different modular assembly line
concepts were studied: conveyor line and box assembly line.
Mathematical model for two assembly line concepts were developed
and their production line efficiency were compared as a performance
measure to improve their assembly line balancing.
Abstract: In this paper, we investigate dynamics of 2n almost periodic attractors for Cohen-Grossberg neural networks (CGNNs) with variable and distribute time delays. By imposing some new assumptions on activation functions and system parameters, we split invariant basin of CGNNs into 2n compact convex subsets. Then the existence of 2n almost periodic solutions lying in compact convex subsets is attained due to employment of the theory of exponential dichotomy and Schauder-s fixed point theorem. Meanwhile, we derive some new criteria for the networks to converge toward these 2n almost periodic solutions and exponential attracting domains are also given correspondingly.
Abstract: This study experimentally investigates the heat transfer effects of forced convection and natural convection under different substrate openings design. A computational fluid dynamics (CFD) model was established and implemented to verify and explain the experimental results and heat transfer behavior. It is found that different opening position will destroy the growth of the boundary layer on substrates to alter the cooling ability for both forced under low Reynolds number and natural convection. Nevertheless, having too many opening may reduce heat conduction and affect the overall heat transfer performance. This study provides future researchers with a guideline on designing and electronic package manufacturing.
Abstract: FACTS devices are used to control the power flow, to
increase the transmission capacity and to optimize the stability of the
power system. One of the most widely used FACTS devices is
Unified Power Flow Controller (UPFC). The controller used in the
control mechanism has a significantly effects on controlling of the
power flow and enhancing the system stability of UPFC. According
to this, the capability of UPFC is observed by using different control
mechanisms based on P, PI, PID and fuzzy logic controllers (FLC) in
this study. FLC was developed by taking consideration of Takagi-
Sugeno inference system in the decision process and Sugeno-s
weighted average method in the defuzzification process. Case studies
with different operating conditions are applied to prove the ability of
UPFC on controlling the power flow and the effectiveness of
controllers on the performance of UPFC. PSCAD/EMTDC program
is used to create the FLC and to simulate UPFC model.